Very cool vdo, thank you for posting. Amazing tidal flats where you live. At the 6:00 min mark, you dropped altitude, Wow! That's when I sat up and took notice. Plus, my own AR Wing Pro arrived today, and your vdo popped up, sweet!
Glad you enjoyed it, hoping to get back there and do some more flights now the holiday season is over and the beaches are clear of sunbathers and kids. Happy flying with your AR Pro they are awesome wings imo.
Mad flying skills. I've been thinking of building a wing. I was leaning towards the AR pro until I saw some of your videos. Now I'm sold on it. I love your 4S setup and configuration.
I assume you are local then Chris. I cycled down there today and it was quite busy. Hoping to do one more flight along the marshes before the holiday season gets started.
@@bluefish3607 yes - I’m local 👍 New Waltham - my favourite haunt is the Fitties - has a sentimental meaning to me - love it down there - I work over the Bridge and so do a bit around the Humber Bridge too. ✊✊
@@MrHitman1966 Yes me too I used to work in the change kiosk in the fitties arcade when I was on summer holidays many many years ago, I have fond memories of all those holiday romances with yorkshire lasses 😀 I really want to fly the AR Pro under the Humber Bridge.
@@bluefish3607 ohhh that would be worth watching - flew my Mavic 3 near the bridge and lost signal - but RTH kicked in - a good spot would be between bridge and barrow haven - there’s a footpath to the edge of the Humber - that would be spectacular 👍👍👍
Dude sick setup! Really nice build! Excellent videos. Awesome info. You've got a subscriber here! "I think I terrified the girl with the dog there" rofl that was a scream of terror! I'm going to get one of these soon, just trying to figure out the right setup. I love how you can just throw it and it launches beautifully... I have seen several on youtube having a tough time with auto-launch due to iNAV settings.
Thanks Chris, yes the poor girl was a little frightened by the launch. I am sure you will love this wing however you choose to set it up. My initial setup was 6S and a 7x6 prop but it was noisy and not that much faster than 4S with a 9x5 prop which I am currently setup with. This is just a fun proximity plane for me with the DJI setup I can go 5-6 km out comfortably. This has been one of the easiest planes to launch of all I have built so far but iNav Autolaunch has always worked well for me. My LOS skills are very poor so thats a very important feature to allow me to launch and loiter safely before putting the goggles on. I hope you enjoy your AR Pro as much as I am enjoying mine. Happy Flying!
What are you using for your osd! Not stock inav? I want it for my 900. Have a matek 405se in it with inav 2.3ish I think. Been forever since I flown it.
@@bluefish3607 no I wasn't critical of your flying.. That's excellent 😎.. It just takes a bit of getting used to the way it banks compared to a quad... Loving your vids 😎
@@simonwood8685 hahah Simon I didn't take it that way my friend, it was a joke, I have quite a dry sense of humour that doesn't always come across well in type. First time I flew a wing after quads I shit my pants because of no Yaw and it just would not turn. Bank and Yank took a while to get used to now I am quite comfortable with it and with each flight push the maneuverability further and further, its so much fun. :-)
Nice video. Think you have just convinced me this is what I need. Only from the other side of the water, when’s a good time to find the beeches empty? Been over a few times but alway ram packed.
I have just changed my motor for a SunnySky 2216 1400Kv MkIII with an 8x6 prop as I think it wilkl give me a little more acceleration out of the turns and better climb rate. This time of year as the weather gets colder is the best time for beach runs, in summer you need to get there really early in the morning like 5 or 6 am latest.
That GoPro mount is exactly what I'm looking for, all the others don't seem to accommodate the Velcro strap too.... you wouldn't happen to have an STL for that at all would you? Cheers
Awsome video pal. Looking forward to purchasing one of these. Would have loved to have seen the perspective from the dog walkers as you buzzed them at 70mph 😁
The hypersmooth footage with OSD overlay is the best I've seen TBH..Where is distance from home and the direction pointer??? You know you landed it downwind again..???😀😀🤔🤔🇬🇧
Thanks, I cant get the home arrow or direction from home from the blackbox data, but I do have it in the DJI OSD when I am flying. I must remember the wind directions on landings will make them easier to flare no doubt, thanks for the reminder.
Glenn, yet again you produce some more expert flying and footage. Fantastic mate. You will need that Foam Armour if you get yourself down here at some point mate. My new nickname given to me by another flying expert I know is....Gorseman!!! My planes have spent a lot of time in it 😐. Really great footage again, let's hope you get some of The New Forest in due course👍
Hi Mick all good with you I hope. Yeah I always enjoy beach flights great for get your confidence up on long low level fast runs. I will steel plate the underside of the AR Pro in preparation :-) Looks like there will be the chance for me to start getting out across the UK to other flying spots that I planned to start last year quite soon. I am looking forward to meeting the Gorseman of the Apocolypse :-)
@@bluefish3607 Well the offer is anyways there Glenn, it would be nice to pick your brains for a few hours whilst seeing that machine fly. There are some excellent low level runs here across The Forest. The area I normally fly is in a valley with lots of re-entrants feeding the hillside with wild forest ponies, deer etc. All great to see from the air. I am sure you would get some great footage. Looking forward to it mate. Btw, just purchased some of that foam armour, can't believe I have lasted this long without it!! Gorseman of the Apocalypse......🤣👍
Glad you enjoyed it Mike. The AR Pro is super versatile Wing you can fly it as I do proximity with DJI or go analogue and fly long range, a friend of mine has his setup for long range and just completed a 70 plus km long range flight. Load up with LION and you could probably go further with the right setup.
Hi Doug, I used the blackbox data from the FC and processed it with Dashware. Here is a video that shows how to do it: th-cam.com/video/LAEaRnkQ9kE/w-d-xo.html You can get Dashware free from here: www.dashware.net/
Lovely footage! I've got the AR Pro as my first venture away from multirota. Im nervous of my first launch, not being that familar with iNav, it would be massively helpful if you would be prepared to share the the CLI dump?
Hi, I did the same and just about two years ago got my first wing after flying quads for 4 years. Hardly fly my quads now as this has absorbed me so much. You can get my AR Pro iNav dump here: drive.google.com/file/d/1WdIKnhuoCOJwCWB4Ms2OsKUnbnmBKpSF/view?usp=sharing
Very good fly. Only 1 problem : servos 08 not strong for fast fly ( i crash my fx61 on 150 kmh). Maybe posible ask from you nose model solid file ? ( i want use go pro 8 on this wing).
Hi Alex the Emax ES08MD are fine on my AR Pro its not that fast and I have used them on my AR 900 6S flying at over 200 kmh. I am using much stronger servos in my 6S Mini Drak build though. Here is the STL for my Hero 6 mount you will need to modify it I think for the Hero 8 drive.google.com/file/d/1HTEzufceWCDX9ylOE2qZYtWE056iXa3z/view?usp=sharing
Hi I used the blackbox data from the FC and processed it with Dashware. Here is a video that shows how to do it: th-cam.com/video/LAEaRnkQ9kE/w-d-xo.html You can get Dashware free from here: www.dashware.net/ I may do a video on it myself in future if I get time
I used the blackbox data from the FC and processed it with Dashware. Here is a video that shows how to do it: th-cam.com/video/LAEaRnkQ9kE/w-d-xo.html You can get Dashware free from here: www.dashware.net/ I may do a video on it myself in future if I get time
I used the blackbox data from the FC and processed it with Dashware. Here is a video that shows how to do it: th-cam.com/video/LAEaRnkQ9kE/w-d-xo.html You can get Dashware free from here: www.dashware.net/ I may do a video on it myself in future if I get time
Hi There sorry for the delay in replying been pretty busy with work recently. I got it from here deluxematerials.co.uk/collections/building-finishing-products/products/foam-armour That said now I have tested it fully it does not like getting wet as it starts to bubble but fine in the dry.
what did it weigh in at with the 5200. I've a 5000 in mine and still needed 110g of weight in the nose. I lamented the wings and underside so that must add a bit.
Great job!! I downloaded your other gopro mount for the AR pro and printed it. Is there any chance I can get the stl file? I use the Runcam version thats like the gopro 5 and its a tad to small and would like to modify the camera section.
IF you are in Facebook... would you please share a few pictures of the DJI video set up "wanna see your antennas... I'm incapable to reach more than 1.8 Kilometers" Pretty please!
About to set up a build similar to yours. I'm surprised it cruises relatively high at 8 amps. Do you think adding a 10x5 prop would improve efficiency?
I could get a lot more efficiency fort sure but I like the current setup with balance of power punch and performance. This is a DJI setup wing so I won't be flying it long range. I am just finishing a second Dart XL V2 which I am setting up for high efficiency and long range flights and missions.
Here are all my Autolaunch settings: set nav_fw_launch_accel = 1863 set nav_fw_launch_max_angle = 180 set nav_fw_launch_detect_time = 40 set nav_fw_launch_thr = 1900 set nav_fw_launch_idle_thr = 1200 set nav_fw_launch_motor_delay = 100 set nav_fw_launch_spinup_time = 100 set nav_fw_launch_end_time = 3000 set nav_fw_launch_min_time = 2000 set nav_fw_launch_timeout = 6000 set nav_fw_launch_max_altitude = 6000 set nav_fw_launch_climb_angle = 30
@@bluefish3607 just a last question sir? How many volts did you use to power the Telefly tiny module? Did you just connect it to a separate 3s battery or did you use a voltage regulator and reduced the voltage to 12v if you used a 4s? Did the tiny overheat at any time during your bench tests and flights? Hope to connect with you on whatsapp
@@raffman4266 Because I powered my GPS separately from my F405 FC I did not need to use 12v into the TTiny and I used a 9v source from my FC. It did not overheat at all in this configuration. See the notes copied directly from the My Fly Dream manual to explain this. In case of sharing a GPS, you need to connect these wires in the above picture: PortA P#2 GND : Connect to the GND wire of your GPS. PortA P#3 U2 RX: Connect to the TXD wire of your GPS. PortA P#13 GND: Connect to the Power - PortA P#14 Power: Connect to the Power +. You can use 7~15V DC if you don't need to power a GPS by TeleFlyTIny. To use a separate GPS, you also need to connect PortA P#1(+5V) to your GPS. And power the TeleFlyTiny with DC 7~12V DC to avoid overheat problem.
Great video! What is the flinying time of this setup? Around 15 min just like in the video? And how do you use the 2e lipo? For vtx? I would like to have a picture to steel your setup mat ;-)
That flight was with a 3300mah 4S and yes about 15 mins with the throttle levels I was using most of the time. Easily 20-25 mins flying it like a Sunday driver :-) Not sure what you mean about the 2e lipo. Here is an overview of the build and setup, if there is anything you need just give me a shout. th-cam.com/video/U8NLCYz1H8Q/w-d-xo.html
@@bluefish3607 nice! i would like to place 3s lipo in it because i dont have to but new expensive lipos. I could place 2x3000 mah paralell.. But i am struggling with the setup. Can you give me some advice? I tried ecalc.com but dont know if 3s will work for long range (30 min) am a sumday cruiser as well 😎
@@bluefish3607 ok here we go: plane: ar wing pro fc: Eagle tree vector vtx: Immersionrc vtx 600mw + antenna lhp quanum Radio: spektrum dx6i ezuhf 4ch lite esc: 45 A turnigy AE-45A sbec 5-6v/4A 2-6 cell lipo dc 5.6-25.2v Motor: A2212/T5 2700 KV prop: 6x4 precision prop I do have also a motoredf 22260 3000kv 650w And a turnigy 2822/14 1750 kv / +2600kv (g series) I do have a lot of 3s lipo’s 3000mah . And i want to go longer than 10 min flight time... i dont have to ga fast.. ;-) any suggestions are more than welcom :-)
@@rcnoob573 Hi there I don't have any experience with Eagle Tree vector or Spectrum as I run iNav and FrSky OpenTX with TBS Crossfire on all my planes. In terms of the powertrain the A2212 is quite high KV so should be ok with a 3S lipo and 6x4 prop. I would just do a simple thrust test, hold the plane by its nose and power up the throttle until you feel the plane go light and gently push you had up and take a note of the throttle position. This will give you an idea of the power to weight ration and where you need to launch it sucessfully in terms of power. Apart from that I would just give it a test flight and see how it feels. I have no idea if the eagle tree setup has AutoLaunch like iNav. Good luck with it let me know how she flies.
Thanks, glad you enjoyed it. I used the blackbox data from the FC and processed it with Dashware. Here is a video that shows how to do it: th-cam.com/video/LAEaRnkQ9kE/w-d-xo.html You can get Dashware free from here: www.dashware.net/
@@bluefish3607 Thank you so much. Your flight controller cover is solid gold! that was the first thing I printed for this wing and I love how it keeps the build nice and clean!
I have just coated the entire fuselage on my latest build my DART XLE V2 but not flown it yet. I will be putting up a video tomorrow of the build and my mods. Therefore I cannot say how the foam armour will work for sure but will know when I maiden over the next few days. YOU can get it here: deluxematerials.co.uk/products/foam-armour
@@blackterminal I think lam would be much stronger and wear resistant tbh. I wont know how foam armour works until I have had a few flights and landings. I will be reporting my findings in future videos. Maiden of the XL this week weather permitting.
HI Jamie, I put it to one side for a while as I had issues getting it to work reliably. Just got the compass to attach to the tracker and will be trying it again in upcoming videos with my new long range Dart XL Version 2
Its no good at all, it starts to peel if it gets damp. A much better option is to use E6000 or Goop, I have coated thr front of my AR Pro test plane and so far its held up well on a number of landings and one reasonably heavy crash, and its waterproof!
@@Swimfinz Yes definitely thats prbably the best method. I just did two tests using two different covering films and they have held up really well and made the wings stiffer. th-cam.com/video/SvtxLuX2TAk/w-d-xo.html
Wow, beautiful ... perfect flying, precise, super smooth and fast ... great narration and the final with the music was a piece of art for every aviation enthusiast - love it! Also thanks for the hint with foam armor, will see if they have it, or something similar here in Germany. Regarding your cool submarine fishing contraption, sorry the generations before me f-ed up the world so utterly and so very unnecessary ... one good thing remained, I will never be a proud nationalist with this history, I will always be a liberal who identifies more with being a European than a German ... I love the British but ironically now the UK isn't Europe anymore.
Hi Glad you liked it I had great fun that day. I think every nation has had its fair share of war and i agree so unnecessary. I will be coming to germany to fly with my friend later in the summer when I can travel, I came in 2019 and loved the country, the people, the food and especially the beer!
Hi Glenn, just to let you know that it was a great narration on Marc Hoffmans channel about the groundstation and flight path. "He did not made it to the UK" was really funny too when the MQTT data might have lost and we assumed he was still en route. Great collaboration about that very basic and cheap groundcontrol ... Your pronounciation of "Krankenhaus" was pretty decent or close to native speaker. That building was part of a defense or fortress chain against invasion and subs ... manned with a lot of men back then 247 and later by a pirate radio station we had heard of back in the 70s or 80s as the pirate radio. Thanks a lot for the great narration about the blackbox data. btw ... I had subscribed too ... got my AR Wing pro late autumn last year but without time for building ...
Thank you it was a lot of fun and I am pleased I got the Krankenhaus pronuciation right. I have not spoken much German since school but hope to improve it for when I come to stay at Marc’s place in the summer for a week of flying. I came in 2019 but could not come last year due to Covid. I got my module delivered today so hope to do some testing on my plane in some of my future videos. Anyway glad you enjoyed it and thanks for the extra information on the Krankenhaus it has a very interesting history indeed.
Here in the U.SA if I frighten a dog Walker I'd surely have the police there yipping at me. I have lost so many great flight spots because of dog walkers
yes DJI on this plane :-) I used the blackbox data from the FC and processed it with Dashware. Here is a video that shows how to do it: th-cam.com/video/LAEaRnkQ9kE/w-d-xo.html You can get Dashware free from here: www.dashware.net/
@@bluefish3607 this is somthing new to me! Never heard of this! Great now somthing els I'm gonna get myself into haha! Thanks. So it will work with non dji stuff
@@jbizzbuildsmanstuff9932 All the OSD elements are powered from iNav blackbox data and then you choose your dials and sliders etc and overlay that over the video footage. The painless video explains it better than I can tbh.
@@jbizzbuildsmanstuff9932 Are you using iNav? You record all the telemetry data in the blackbox file and then convert it to a CSV file for input into Dashware. The Painless video link I gave you explains the whole process and I followed that to get the results you see in my video.
![[LIVE] : ONE ลุมพินี 89 | คู่เอก "ยอดไอคิว vs คิริลล์"](http://i.ytimg.com/vi/Z3vYkHJ_5Ig/mqdefault.jpg)
AWESOME vid. Love the flight and narration of what's going on.
Glad you enjoyed it Steve, I had a lot of fun that day
The scream from that lady at 1:50 😂
@Dyon B Looked like she even grabbed at her heart, even the dog looked like WTF
I know it startled me, I thought the dog had bitten her at first!
Lol too funny
@@bluefish3607 😅
Love your videos!! Always cool seeing some long range and a bit of proximity flying in 4K!
Glad you enjoy coming along with me on me on my flights
Very cool vdo, thank you for posting. Amazing tidal flats where you live. At the 6:00 min mark, you dropped altitude, Wow! That's when I sat up and took notice. Plus, my own AR Wing Pro arrived today, and your vdo popped up, sweet!
Glad you enjoyed it, hoping to get back there and do some more flights now the holiday season is over and the beaches are clear of sunbathers and kids. Happy flying with your AR Pro they are awesome wings imo.
Mad flying skills. I've been thinking of building a wing. I was leaning towards the AR pro until I saw some of your videos. Now I'm sold on it. I love your 4S setup and configuration.
I am glad you enjoyed the videos, the AR pro is a really great wing and I am sure you will have tons of fun with it.
I love your gopro session 3D print for the AR Wing pro. Fits perfect !
Glad you found it useful, your very welcome
Loved this place, Glenn. Nice and calm beach and flight. Can't wait to make such good videos like you. Thanks for sharing. Take care
Yes I love flying beaches, I look forward to seeing some videos of places you will fly. All the best Silvio.
Brilliant - I love flying my drone down there - love the wing - superb 👌
I assume you are local then Chris. I cycled down there today and it was quite busy. Hoping to do one more flight along the marshes before the holiday season gets started.
@@bluefish3607 yes - I’m local 👍 New Waltham - my favourite haunt is the Fitties - has a sentimental meaning to me - love it down there - I work over the Bridge and so do a bit around the Humber Bridge too. ✊✊
@@MrHitman1966 Yes me too I used to work in the change kiosk in the fitties arcade when I was on summer holidays many many years ago, I have fond memories of all those holiday romances with yorkshire lasses 😀 I really want to fly the AR Pro under the Humber Bridge.
@@bluefish3607 ohhh that would be worth watching - flew my Mavic 3 near the bridge and lost signal - but RTH kicked in - a good spot would be between bridge and barrow haven - there’s a footpath to the edge of the Humber - that would be spectacular 👍👍👍
@@MrHitman1966 You should say don’t do that its far too dangerous and risky 😂
really nice set up so
smooth
Its a really nice balanced setup tbh I always enjoy flying that wing.
excellente videos !!!! thx ----I wait my AR Wing....!
Sorry for late reply Mauro TH-cam messed up my comments, fixed now. I guess you have your AR Pro now and hope you are having fun with it. Happy flying
@@bluefish3607 thanks mate ! I have my arWing pro all right 👌🏻
Nice one mate, thanks for sharing 😎👍
Glad you enjoyed it
Dude sick setup! Really nice build! Excellent videos. Awesome info. You've got a subscriber here!
"I think I terrified the girl with the dog there" rofl that was a scream of terror!
I'm going to get one of these soon, just trying to figure out the right setup. I love how you can just throw it and it launches beautifully... I have seen several on youtube having a tough time with auto-launch due to iNAV settings.
Thanks Chris, yes the poor girl was a little frightened by the launch. I am sure you will love this wing however you choose to set it up.
My initial setup was 6S and a 7x6 prop but it was noisy and not that much faster than 4S with a 9x5 prop which I am currently setup with.
This is just a fun proximity plane for me with the DJI setup I can go 5-6 km out comfortably.
This has been one of the easiest planes to launch of all I have built so far but iNav Autolaunch has always worked well for me.
My LOS skills are very poor so thats a very important feature to allow me to launch and loiter safely before putting the goggles on.
I hope you enjoy your AR Pro as much as I am enjoying mine. Happy Flying!
Wow...thats a neat fort...cool drone too.
Glad you liked it Fred, it was a really fun day I enjoyed it a lot
@@bluefish3607 Yeah the weather was most excellent.
Is the flying footage from your DJI onboard camera or the GoPro with OSD overlaid? It's fantastic!
fun video, thanks for sharing.
Glad you enjoyed it Frank, happy flying
What are you using for your osd! Not stock inav? I want it for my 900. Have a matek 405se in it with inav 2.3ish I think. Been forever since I flown it.
Nice vidio be looking out for more
Glad you enjoyed it Barry, UK weather is turning now so there won't be that many opportunities for me to get out for a while.
Great footage... Allways looks like your going into the ground when you turn around
Thats either bad piloting skills or the way Reelsteady Go compresses the footage when it smooths it :-)
@@bluefish3607 no I wasn't critical of your flying.. That's excellent 😎.. It just takes a bit of getting used to the way it banks compared to a quad... Loving your vids 😎
@@simonwood8685 hahah Simon I didn't take it that way my friend, it was a joke, I have quite a dry sense of humour that doesn't always come across well in type.
First time I flew a wing after quads I shit my pants because of no Yaw and it just would not turn. Bank and Yank took a while to get used to now I am quite comfortable with it and with each flight push the maneuverability further and further, its so much fun. :-)
Nice video. Think you have just convinced me this is what I need. Only from the other side of the water, when’s a good time to find the beeches empty? Been over a few times but alway ram packed.
I have just changed my motor for a SunnySky 2216 1400Kv MkIII with an 8x6 prop as I think it wilkl give me a little more acceleration out of the turns and better climb rate.
This time of year as the weather gets colder is the best time for beach runs, in summer you need to get there really early in the morning like 5 or 6 am latest.
That GoPro mount is exactly what I'm looking for, all the others don't seem to accommodate the Velcro strap too.... you wouldn't happen to have an STL for that at all would you? Cheers
Here you go: drive.google.com/file/d/1HTEzufceWCDX9ylOE2qZYtWE056iXa3z/view?usp=sharing
Awsome video pal. Looking forward to purchasing one of these. Would have loved to have seen the perspective from the dog walkers as you buzzed them at 70mph 😁
Cheers Jack. It does sound pretty mean flat out when it buzzes over my head.
The hypersmooth footage with OSD overlay is the best I've seen TBH..Where is distance from home and the direction pointer???
You know you landed it downwind again..???😀😀🤔🤔🇬🇧
Thanks, I cant get the home arrow or direction from home from the blackbox data, but I do have it in the DJI OSD when I am flying.
I must remember the wind directions on landings will make them easier to flare no doubt, thanks for the reminder.
@@bluefish3607 Yeah, well done, it's a fast trip and a good setup for ripping along an empty beach now...🤔😀🇬🇧
Glenn, yet again you produce some more expert flying and footage. Fantastic mate. You will need that Foam Armour if you get yourself down here at some point mate. My new nickname given to me by another flying expert I know is....Gorseman!!! My planes have spent a lot of time in it 😐. Really great footage again, let's hope you get some of The New Forest in due course👍
Hi Mick all good with you I hope. Yeah I always enjoy beach flights great for get your confidence up on long low level fast runs.
I will steel plate the underside of the AR Pro in preparation :-) Looks like there will be the chance for me to start getting out across the UK to other flying spots that I planned to start last year quite soon.
I am looking forward to meeting the Gorseman of the Apocolypse :-)
@@bluefish3607 Well the offer is anyways there Glenn, it would be nice to pick your brains for a few hours whilst seeing that machine fly. There are some excellent low level runs here across The Forest. The area I normally fly is in a valley with lots of re-entrants feeding the hillside with wild forest ponies, deer etc. All great to see from the air. I am sure you would get some great footage. Looking forward to it mate. Btw, just purchased some of that foam armour, can't believe I have lasted this long without it!! Gorseman of the Apocalypse......🤣👍
Fantastic flight mate... what is the longest round trip flight capability of this craft ?
Glad you enjoyed it Mike. The AR Pro is super versatile Wing you can fly it as I do proximity with DJI or go analogue and fly long range, a friend of mine has his setup for long range and just completed a 70 plus km long range flight.
Load up with LION and you could probably go further with the right setup.
8000mah 4s2p 21700 li-on pack available for the AR Wing Pro on ebay over an hour flight time
Wow Scooby that sounds awesome, I have not flown the AR Pro long range but I know it is very capable. You have a link to that pack?
The insanely slow reaction from the girl was amazing! Hahahaa
What was she thinking? It was a big screaming dragon?
Its a bird, its a plane, its AR Pro :-)
I love how it shows all your instrumentation along the bottom top and side of your video, how are you doing that?
Hi Doug, I used the blackbox data from the FC and processed it with Dashware.
Here is a video that shows how to do it: th-cam.com/video/LAEaRnkQ9kE/w-d-xo.html
You can get Dashware free from here: www.dashware.net/
Would you list your equipment as I have been wanting to set up an outfit like this. Is there special equipment needed to travel that far away?
My equipment list is in the video description
Lovely footage! I've got the AR Pro as my first venture away from multirota. Im nervous of my first launch, not being that familar with iNav, it would be massively helpful if you would be prepared to share the the CLI dump?
Hi, I did the same and just about two years ago got my first wing after flying quads for 4 years. Hardly fly my quads now as this has absorbed me so much.
You can get my AR Pro iNav dump here:
drive.google.com/file/d/1WdIKnhuoCOJwCWB4Ms2OsKUnbnmBKpSF/view?usp=sharing
@@bluefish3607 Super helpful, thank you so much!
Very good fly. Only 1 problem : servos 08 not strong for fast fly ( i crash my fx61 on 150 kmh).
Maybe posible ask from you nose model solid file ? ( i want use go pro 8 on this wing).
Hi Alex the Emax ES08MD are fine on my AR Pro its not that fast and I have used them on my AR 900 6S flying at over 200 kmh. I am using much stronger servos in my 6S Mini Drak build though.
Here is the STL for my Hero 6 mount you will need to modify it I think for the Hero 8
drive.google.com/file/d/1HTEzufceWCDX9ylOE2qZYtWE056iXa3z/view?usp=sharing
@@bluefish3607 🥰🥰🥰🥰🥰🥲
Hello! Please, tell how you make a telemetry on video? Or maybe you can make video tutorial how to do that? Thank you in advance!
Hi I used the blackbox data from the FC and processed it with Dashware.
Here is a video that shows how to do it: th-cam.com/video/LAEaRnkQ9kE/w-d-xo.html
You can get Dashware free from here: www.dashware.net/
I may do a video on it myself in future if I get time
@@bluefish3607 thanks a lot!
Very nice video as always. How did you get the inav parameters in the gopro footage as an overlay? Cheers
I used the blackbox data from the FC and processed it with Dashware.
Here is a video that shows how to do it: th-cam.com/video/LAEaRnkQ9kE/w-d-xo.html
You can get Dashware free from here: www.dashware.net/
I may do a video on it myself in future if I get time
wow! what is the OSD??? beautiful
I used the blackbox data from the FC and processed it with Dashware.
Here is a video that shows how to do it: th-cam.com/video/LAEaRnkQ9kE/w-d-xo.html
You can get Dashware free from here: www.dashware.net/
I may do a video on it myself in future if I get time
Can you tell me more about the foam armor? Where did you buy that (link?) Thanks a lot
Hi There sorry for the delay in replying been pretty busy with work recently. I got it from here deluxematerials.co.uk/collections/building-finishing-products/products/foam-armour
That said now I have tested it fully it does not like getting wet as it starts to bubble but fine in the dry.
what did it weigh in at with the 5200.
I've a 5000 in mine and still needed 110g of weight in the nose. I lamented the wings and underside so that must add a bit.
Hi, it weighed in at 1435 grams including lipo and GoPro hero 6 and no nose weight is required with that setup.
Great job!! I downloaded your other gopro mount for the AR pro and printed it. Is there any chance I can get the stl file? I use the Runcam version thats like the gopro 5 and its a tad to small and would like to modify the camera section.
Yes sure I will get the STL uploaded so you can access it
IF you are in Facebook... would you please share a few pictures of the DJI video set up "wanna see your antennas... I'm incapable to reach more than 1.8 Kilometers" Pretty please!
th-cam.com/video/U8NLCYz1H8Q/w-d-xo.html
Hi the video of my setup will show you how I mounted the DJI air unit and antennas.
About to set up a build similar to yours. I'm surprised it cruises relatively high at 8 amps. Do you think adding a 10x5 prop would improve efficiency?
I could get a lot more efficiency fort sure but I like the current setup with balance of power punch and performance. This is a DJI setup wing so I won't be flying it long range. I am just finishing a second Dart XL V2 which I am setting up for high efficiency and long range flights and missions.
Stunning flight. Whats your AUW with the 4s 5200mah lipo?
1322g with the session 5 and 1365g with the Hero 6
Thanks so much, looking forward to your vids, Cheers! (Couldn´t reply either)
I seem to be able to reply now, happy flying Bro.
What is your autolaunch throttle set to sir? Another inspiring video about the beauty of the hobby!! Thank you so much sir
Here are all my Autolaunch settings:
set nav_fw_launch_accel = 1863
set nav_fw_launch_max_angle = 180
set nav_fw_launch_detect_time = 40
set nav_fw_launch_thr = 1900
set nav_fw_launch_idle_thr = 1200
set nav_fw_launch_motor_delay = 100
set nav_fw_launch_spinup_time = 100
set nav_fw_launch_end_time = 3000
set nav_fw_launch_min_time = 2000
set nav_fw_launch_timeout = 6000
set nav_fw_launch_max_altitude = 6000
set nav_fw_launch_climb_angle = 30
@@bluefish3607 Thank You very much sir! Kudos to you !!
@@raffman4266 Your very welcome, happy flying
@@bluefish3607 just a last question sir? How many volts did you use to power the Telefly tiny module? Did you just connect it to a separate 3s battery or did you use a voltage regulator and reduced the voltage to 12v if you used a 4s? Did the tiny overheat at any time during your bench tests and flights? Hope to connect with you on whatsapp
@@raffman4266 Because I powered my GPS separately from my F405 FC I did not need to use 12v into the TTiny and I used a 9v source from my FC. It did not overheat at all in this configuration.
See the notes copied directly from the My Fly Dream manual to explain this.
In case of sharing a GPS, you need to connect these wires in the above picture:
PortA P#2 GND : Connect to the GND wire of your GPS.
PortA P#3 U2 RX: Connect to the TXD wire of your GPS.
PortA P#13 GND: Connect to the Power -
PortA P#14 Power: Connect to the Power +. You can use 7~15V DC if you don't need to power a
GPS by TeleFlyTIny.
To use a separate GPS, you also need to connect
PortA P#1(+5V) to your GPS. And power the TeleFlyTiny with DC 7~12V DC to avoid overheat
problem.
This is cool man 😁
Glad you enjoyed it
Great video! What is the flinying time of this setup? Around 15 min just like in the video? And how do you use the 2e lipo? For vtx? I would like to have a picture to steel your setup mat ;-)
That flight was with a 3300mah 4S and yes about 15 mins with the throttle levels I was using most of the time. Easily 20-25 mins flying it like a Sunday driver :-)
Not sure what you mean about the 2e lipo.
Here is an overview of the build and setup, if there is anything you need just give me a shout.
th-cam.com/video/U8NLCYz1H8Q/w-d-xo.html
@@bluefish3607 nice! i would like to place 3s lipo in it because i dont have to but new expensive lipos. I could place 2x3000 mah paralell.. But i am struggling with the setup. Can you give me some advice? I tried ecalc.com but dont know if 3s will work for long range (30 min) am a sumday cruiser as well 😎
@@rcnoob573 What is your plane and full spec?
@@bluefish3607
ok here we go:
plane: ar wing pro
fc: Eagle tree vector
vtx: Immersionrc vtx 600mw + antenna lhp quanum
Radio: spektrum dx6i
ezuhf 4ch lite
esc: 45 A turnigy AE-45A sbec 5-6v/4A 2-6 cell lipo dc 5.6-25.2v
Motor: A2212/T5 2700 KV
prop: 6x4 precision prop
I do have also a motoredf 22260 3000kv 650w
And a turnigy 2822/14 1750 kv / +2600kv (g series)
I do have a lot of 3s lipo’s 3000mah . And i want to go longer than 10 min flight time... i dont have to ga fast.. ;-) any suggestions are more than welcom :-)
@@rcnoob573 Hi there I don't have any experience with Eagle Tree vector or Spectrum as I run iNav and FrSky OpenTX with TBS Crossfire on all my planes.
In terms of the powertrain the A2212 is quite high KV so should be ok with a 3S lipo and 6x4 prop.
I would just do a simple thrust test, hold the plane by its nose and power up the throttle until you feel the plane go light and gently push you had up and take a note of the throttle position. This will give you an idea of the power to weight ration and where you need to launch it sucessfully in terms of power.
Apart from that I would just give it a test flight and see how it feels. I have no idea if the eagle tree setup has AutoLaunch like iNav.
Good luck with it let me know how she flies.
RSGO?
Yes I stabilise all of my flights with RSGO unless its a very calm day which is not often where I live.
where can I find Marc Hoffmans setup. the link is broken
inavfixedwinggroup.com/recommended-setups/long-range-setups/ar-wing-pro-long-range-setup/
One question, Glenn. What are the longests distances you are flying with this setup? Thanks
I can only get out about 5km with DJI FPV, I am going to build a long range AR Pro with 5.8Ghz and LION to go out 30k
@@bluefish3607 Wow. That is real long range. Lion packs are great. Success.
The OSD overlay is amazing as is the flight. how do you do that?
Thanks, glad you enjoyed it. I used the blackbox data from the FC and processed it with Dashware.
Here is a video that shows how to do it: th-cam.com/video/LAEaRnkQ9kE/w-d-xo.html
You can get Dashware free from here: www.dashware.net/
@@bluefish3607 Thank you so much. Your flight controller cover is solid gold! that was the first thing I printed for this wing and I love how it keeps the build nice and clean!
@@kerbouchaud1 Glad you like it, I am not a fan of seeing a rats nest of cables in a build. I am making them for all my builds now.
Nice dude 👍🏻
Glad you liked it, I love flying on the beach
Nice!
Thank you! Cheers!
Is that blue stick on vinyl for your stickers
Yes its just vinyl wrap film
@@bluefish3607 thank you sir
sorry to say: the view a bit lack of sun light...maybe should do during summer..
It's never Summer in the UK :-)
whats is the maximum thrust in gram with that motor?
There is nothing on the brotherhobby site, I referred to this video for my information th-cam.com/video/TlB3BBluwrc/w-d-xo.html
Отлично!
Do you have a link to the foam armour?
I have just coated the entire fuselage on my latest build my DART XLE V2 but not flown it yet. I will be putting up a video tomorrow of the build and my mods.
Therefore I cannot say how the foam armour will work for sure but will know when I maiden over the next few days.
YOU can get it here: deluxematerials.co.uk/products/foam-armour
@@bluefish3607 how do you think it compares to laminating the foam? Thank you for the link
@@blackterminal I think lam would be much stronger and wear resistant tbh. I wont know how foam armour works until I have had a few flights and landings. I will be reporting my findings in future videos. Maiden of the XL this week weather permitting.
ReelSteady?
Filmed in 2.7K 4:3 processed with Reelsteady Go then OSD added with Dashware and edited and colour graded in Premiere Pro.
Beautiful work!
Is it different then flying a arrow wing?
Hi Elijah, I am not sure of your question, not heard of an arrow wing before?
@@bluefish3607 ft arrow wing
@@Elijahhuckaby Ah I looked it up on Google, I have not seen or flown an Arrow wing so unfortunately cannot give you any honest feedback Elijah
@@bluefish3607 Ok is the Controls sensitive
@@Elijahhuckaby I have mine setup quite sensitive but you can adjust everything to your own preference with inav.
Hi there. What pitch degree and launch degree did you set in inav? Cheers!
MY FC board alignment pitch and roll is set at 0 degrees and my launch angle is 30 degrees
@@bluefish3607 thank you so much.
@@michalp.4975 Your very welcome, happy flying
Superb!.. but which Estuary is that.?....it looks a great place to visit for a walk on proper sand(unlike where I live on the English Channel.😳
@@chrissofpv3017 Its Cleethorpes on the Humber estuary.
Fella you still using the mfd tracker? Did you rate it??
HI Jamie, I put it to one side for a while as I had issues getting it to work reliably. Just got the compass to attach to the tracker and will be trying it again in upcoming videos with my new long range Dart XL Version 2
@@bluefish3607 keep at it fella really enjoy the videos
How is your "foam armour" holding up?
Its no good at all, it starts to peel if it gets damp. A much better option is to use E6000 or Goop, I have coated thr front of my AR Pro test plane and so far its held up well on a number of landings and one reasonably heavy crash, and its waterproof!
@@bluefish3607 ... Thank you for your prompt response. Wrapping up a foam bird using film, does that work?
@@Swimfinz Yes definitely thats prbably the best method. I just did two tests using two different covering films and they have held up really well and made the wings stiffer. th-cam.com/video/SvtxLuX2TAk/w-d-xo.html
Wow, beautiful ... perfect flying, precise, super smooth and fast ... great narration and the final with the music was a piece of art for every aviation enthusiast - love it!
Also thanks for the hint with foam armor, will see if they have it, or something similar here in Germany.
Regarding your cool submarine fishing contraption, sorry the generations before me f-ed up the world so utterly and so very unnecessary ... one good thing remained, I will never be a proud nationalist with this history, I will always be a liberal who identifies more with being a European than a German ... I love the British but ironically now the UK isn't Europe anymore.
Hi Glad you liked it I had great fun that day. I think every nation has had its fair share of war and i agree so unnecessary.
I will be coming to germany to fly with my friend later in the summer when I can travel, I came in 2019 and loved the country, the people, the food and especially the beer!
Do you still fly ?
yes of course, building a new plane to try and improve how the AR Wing Pro flies. test flight next vid
Lol did she really scream, 😂😂😂😂😂
Yes I thought the dog had attacked her at first :-)
Btw... Your bird is a screamer!
Just like my wife :-)
Hi Glenn, just to let you know that it was a great narration on Marc Hoffmans channel about the groundstation and flight path.
"He did not made it to the UK" was really funny too when the MQTT data might have lost and we assumed he was still en route.
Great collaboration about that very basic and cheap groundcontrol ...
Your pronounciation of "Krankenhaus" was pretty decent or close to native speaker.
That building was part of a defense or fortress chain against invasion and subs ... manned with a lot of men back then 247 and later by a pirate radio station we had heard of back in the 70s or 80s as the pirate radio.
Thanks a lot for the great narration about the blackbox data.
btw ... I had subscribed too ... got my AR Wing pro late autumn last year but without time for building ...
Thank you it was a lot of fun and I am pleased I got the Krankenhaus pronuciation right. I have not spoken much German since school but hope to improve it for when I come to stay at Marc’s place in the summer for a week of flying. I came in 2019 but could not come last year due to Covid.
I got my module delivered today so hope to do some testing on my plane in some of my future videos.
Anyway glad you enjoyed it and thanks for the extra information on the Krankenhaus it has a very interesting history indeed.
Here in the U.SA if I frighten a dog Walker I'd surely have the police there yipping at me. I have lost so many great flight spots because of dog walkers
🙄😜😯😍
Nvm. Dji lol
yes DJI on this plane :-)
I used the blackbox data from the FC and processed it with Dashware.
Here is a video that shows how to do it: th-cam.com/video/LAEaRnkQ9kE/w-d-xo.html
You can get Dashware free from here: www.dashware.net/
@@bluefish3607 this is somthing new to me! Never heard of this! Great now somthing els I'm gonna get myself into haha! Thanks. So it will work with non dji stuff
@@jbizzbuildsmanstuff9932 All the OSD elements are powered from iNav blackbox data and then you choose your dials and sliders etc and overlay that over the video footage.
The painless video explains it better than I can tbh.
So are you recording debug or what in Blackbox? I don't know Wich one grabs all that data. I usually just look at gyro and stuff like that lol
@@jbizzbuildsmanstuff9932 Are you using iNav? You record all the telemetry data in the blackbox file and then convert it to a CSV file for input into Dashware. The Painless video link I gave you explains the whole process and I followed that to get the results you see in my video.