Always wondered how you put it on and take it off and your right about how they don't come to exact specs and how some nurturing is needed .hot glue smart . I would of tried double-sided tape if the hug was there but I guess then it wouldn't sit flush in so xxx for the hot glue idea 😉
Hi Mike I was just going to say if and when you have access to any under the part, or any part of the car that involved taking away something if you have protection spray similar to display of like a bed liner do not spray it on an exhaust obvious reasons the heat but anywhere that you might have trouble in the future with rust it is a good idea to spray it now where you have access you can get a spray that is not as strong as bed liner but is a good protector against Trust or you can even use Hammerite from a rattle can just clean the area and give it a blow over a liberal coat and it will pay dividend in the future not necessary but considering you have the area exposed why not
Hi Mike 1028 in the video the rubber washer without that it could be one of those things that makes a little noise that drives you mad if you do not have a rubber washer rather than not do it at all a little squirt of silicone as you are closing the screw will be better than nothing, if you do not have silicone you could cut a couple of patches from the tube of an old push bike and put them in position of the rubber washer rather than doing nothing
All them rubber washers so u don’t scratch the diffuser, but you’re karate chopping it with ur finger to show us it’s not going anywhere. Haha great content this is flush
i hope u genuinely enjoyed it ... ye was just showing that if i can press on it with abit of force and it wont move then it surely wont move whilst driving // it really is very solid
Hello does anyone know the size of the bolt at @9:22 or is it the original bolt? I want to attempt this soon but I just wanna be ready for any modifications ! Lol Thank you in advance ! 🙏🏽 love your videos
Thanks i didnt give a size bolt becuz u can use any size as long as its no bigger then the hole u drill...for example if u drill a hole that is no. 8 drill bit get a bolt that is same size as the hole or only slightly smaller ..u dont want any play so it can secure the diffuser.... remember to use rubber waahers and metal washers too to help hold bolt and diffuser in place..careful not to overtighten as it can break the diffuser.... drill slowly and step up the drill bit size do not just drill big hole...carbon fiber isnt suppose to be drilled into as its very easily broken or cracked... i believe my bolt was a m8 75mm long the length just has to be long enough to go through the diffuser and the mount holes... hope this helps
MIKEYZ VLOGZ thanks man ! It helps a lot I appreciate it . Keep up the good work 😎 I’ll try it today since my diffuser just came in today! I just hope it’s long enough as yours so I don’t have to use the old support mounts
great video ..... it does look really nice...so much nicer then the standard rear diffuser...well done..are you going to change the exhaust tips???? or just leave them like that
yes i have got the dual 4inch tips with carbon fiber covers on them too to match the diffuser...and i will also get the x pipe and the valve cutoff so i ccan control how loud i want the exhaust to sound
hmm it should because it's designed for or w204 models... the Cao is for the tow hook that s rows in .. u might be right..some models don't have it .. I'm not sure ..I'll have to find out for ya
so it fits nice and snapped on, did the exact thing with the drilling holes for the support part, but the sides never reached the screw opening for the original diffuser what should i do for that? super glue? anything else i could try?
@@panduhgaming5473 that's really wierd that the diffuser didn't reach the side mounts .. u definitely need to secure the sides too.. did u have to modify the two support bars to the back? as for the sides is there any place to mount it or screw it in
Hey mate, great vids and channel! Easy one, looks like you have the 2010 with the AMG pack? I've got the same but a C250. I looked at that exact same diffuser from the same seller but I wasn't 100% sure that it'd fit as sellers info wasn't great, so I emailed them but no response. So if you've got the 2010 with the AMG pack(?) then I think it's safe for me to assume that sellers difusser will fit mine.
hey mate thanks for the comment... and yes if your diffuser is the same as mine where its flat along the edge ... the facelift version has a rise in the diffuser and isnt flat like ours .... you will notice the difference ...also ensure that the mounting lip is long enough to screw into the mount underneath your car ....where i used the long bolts
@@shaneanderson9064 correct mate that mounting lip some dont go that far out and u would need to cut the mount off your original diffuser in order to be able to mount it .... very important .... good luck with ur install ..im here if u ever have any questions mate ...glad to help the best i can
Perfect. I'll get this one m.aliexpress.com/item/607076552.html?trace=wwwdetail2mobilesitedetail&gps-id=storeRecommendH5&scm=1007.18500.102169.0&scm_id=1007.18500.102169.0&scm-url=1007.18500.102169.0&pvid=f1c575c9-6bcf-4382-bdbe-f4f9dcb6ec99&_t=gps-id%3AstoreRecommendH5%2Cscm-url%3A1007.18500.102169.0%2Cpvid%3Af1c575c9-6bcf-4382-bdbe-f4f9dcb6ec99&spm=a2g0n.detail-amp.store-card.607076552&aff_trace_key=&aff_platform=msite&m_page_id=1197amp-24nZGK13t692wHK-fGt5tg1560397087889 and that'll be that problem solved. Again great job and thanks so much. I'll be watching all your videos now👍
thanks mate, i really do try to make as informative as possible videos rather then just skipping through the task, i always try to show detailed steps and talk you gusy through them
Is this real carbon fiber?? I seen a web with c class rear diffuser but it says only c63 Amg bumpers wonder if the regular c class fitment is same as c63
as long as the same shape it will fit yes its carbon fiber .... the newer models have a dip.. but the preface have a straight cut for the diffuser.. so as long its the exact same shape as ur car it will fit ..but like in my video.. sometimes u gotta do little adjustments ... bare in mind but overall good fitments friend
I haven't done quad tips yet but I do plan too in future ... however I have been contemplating whether I should ..what do you think ? and I would need to have it installed by a shop that can do exhausts as they will need to.be welded on
MIKEYZ VLOGZ thanks Mikeyz. I was thinking the same, after seeing you take off the diffuser and tip, the pipe looks too huge to fit the amg quad tips. I was really hoping I didn’t have to have a shop cut and weld because then it’s permanent. I’m also skeptical, what if the shop doesn’t measure are weld correctly, and it’s slightly crooked or one sticks out more than the other? That would trigger my ocd haha. Love your videos man!
@@flamecrow actually u can easily fit the quad tips and any for that matter ... what's important is once you remove your factory tips which just screw on like I showed in the video... the pipe that the tips fit on is only about 73mm in diameter... and either way as long as u get an exhaust shop to help weld then on they can modify and even expand the tips to suit your style of quad tips.. truth is once u go to the amg style diffuser theres a gap where the exhaust tips sit so u either centre your tips or go for a nice quad tip design
@@MIKEYZVLOGZ i’ve just tried to buy one off your link however they don’t ship to United Kingdom unfortunately, i’ll keep looking some of them do however the bit pricey.
yeah unfortunately certain places don't accept.. but I'm sure if u keep looking on ebay and aliexpress search for w203 diffuser u will find one to ship... it took me a while too
hey buddy so after some research i found that it all depends on how your tow bar is fitted .... check this page out youll see a video of how eaaily a tow bar cab be fitted and how it depends what type of tow bar you install www.benzworld.org/forums/w204-c-class/1502727-tow-bar-w204.html#/topics/1502727
@@MIKEYZVLOGZ could i send u an email with pictures where the towbar it fitted on my car? because i really like the looks of that aggressive rear diffuser
The diffuser I ordered was carbon fiber with the 3 long shark fins, and it was made out of fiberglass. It was a b_tch to put on, I had to shave here, trim there. The fact that it was fiberglass I had to be extremely careful. But the end result made it worth it. O yeah it took me 6 hours to install.
@@MIKEYZVLOGZ Hey Mikeyz or @thebarking2.... I have a 2009 C300 4Matic Sport version (preface lift). I don't mind doing modifications but do you think this will fit? It says it's for c63 amg... does "Sport" on my car mean I have the same AMG rear bumper or trunk as the c63? Here's the item I'm looking at: www.ebay.com/itm/FOR-08-11-BENZ-C63-AMG-BIG-FIN-CARBON-FIBER-REAR-BUMPER-DIFFUSER-TRUNK-SPOILER/223271669272?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649
MIKEYZ VLOGZ Yup, my car is exactly like yours (even the xenon light bulbs which you taught me how to take out) except only my driving seat is on the left, thanks! I’m finally going to do my diffusers after watching your videos almost a year ago.
@@flamecrow then it will fit.... im glad your having a go it really isnt that hars but remember fiber glass is brittle and can break easily its not recommende u drill into fg but i did and it was ok just go slow and be careful..
so i hope i answer all your questions.... bare in mind it was my first few videos so i was just getting the hang of what to expect and do 1. DIFFUSER---i bought mine off ebay for 300.... so if you type in w204 rear diffuser you 'll get a number of diffusers to choose from n different styles . the choice is yours.from big fin to even different designs..price is FROM 300aud TO 500aud always shops around from amazon to aliexpress and ebay , but i usuaually use ebay ......heres a link www.ebay.com.au/sch/i.html?_nkw=w204+rear+diffuser&ssPageName=GSTL&_sop=15 and this is the one i bought and i bargained him down to 300aud www.ebay.com.au/itm/Carbon-Fiber-Rear-Diffuser-for-Mercedes-Benz-W204-C63-AMG-Bumper-Sedan-2008-2011/263634307251?fits=Plat_Gen%3AW204&epid=19018529783&hash=item3d61d448b3:g:jVAAAOSwY31a1-6j:rk:15:pf:0 hope this helps, i guess you can always ask 2. tools.... to be fair..if your going to work on your own car, especially a Mercedes (as mercs have their own screws and bolts likes torx and e-torx so, your going to have to expect to buy some tools ....now not a whole garage of tools, but just the specifics, which are pretty cheap if you buy a box set .... and the tools would be an investment, rather then paying someone to install it , you can invest in your own tools, that way you'll have them for all future projects....so if you watch the video even though i use more advanced tools, they can all be found on ebay really cheap ...also you just have to improvise ...eventhough i used an attachment to a drill, you dont have to. you can just use a right angle torx bit to remove the rear diffuser and the exhaust tips will take a hex bit...which most tool sets will have for example crescent 170pcs toolset heres another link www.ebay.com.au/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=crescent+tool+set+170&_sacat=631&LH_TitleDesc=0&LH_PrefLoc=2&_sop=15&_osacat=631&_odkw=crescent+ool+set+176&rt=nc&LH_TitleDesc=0 these are great usa made tools and actually what i use for all my jobs.... choose from either 128 which will do.... or 170 which has abit more tools and a 1\4" ratchet for harder to reach areas.....either will suffice...now you can always go cheaper and buy tools separately or buy a really cheap tool set, it will still do...but in my experience its cheaper to buy a tool set...thus your investment 3. so to be realistic, you should expect these things especially working on mercedes benz or any car for that matter ....you cant DIY with no tools, but thats just my opinion......my bad for not pointing this out...so i appreciate the feedback it will help me make better videos....and mention these things to begin with ...hate or not i really appreciate the feedback ...so when you watch any video on diy... theres always tools you need to buy so u can get the job done.... its just the nature of DIY
Hi Mike have to say the end result looks sick well done all these little things make the big difference good job bro
thank u friend
Always wondered how you put it on and take it off and your right about how they don't come to exact specs and how some nurturing is needed .hot glue smart . I would of tried double-sided tape if the hug was there but I guess then it wouldn't sit flush in so xxx for the hot glue idea 😉
sorry about the last min .... i had a little outro .... pls forgiv me guys.... still learnig all the software
cool video im just waiting to receive my diffuser so i can install it also...great video ...keep it up ...
Hi Mike I was just going to say if and when you have access to any under the part, or any part of the car that involved taking away something if you have protection spray similar to display of like a bed liner do not spray it on an exhaust obvious reasons the heat but anywhere that you might have trouble in the future with rust it is a good idea to spray it now where you have access you can get a spray that is not as strong as bed liner but is a good protector against Trust or you can even use Hammerite from a rattle can just clean the area and give it a blow over a liberal coat and it will pay dividend in the future not necessary but considering you have the area exposed why not
I have been struggling to find a diffuser for my c180 2009 (2 exhaust pipes on the left) any idea where I could get from?
Hi Mike 1028 in the video the rubber washer without that it could be one of those things that makes a little noise that drives you mad if you do not have a rubber washer rather than not do it at all a little squirt of silicone as you are closing the screw will be better than nothing, if you do not have silicone you could cut a couple of patches from the tube of an old push bike and put them in position of the rubber washer rather than doing nothing
good tip..never had an issue thus far ..thanks for watching my videos
Hey Mike what size was the longer screw you used and the washers ?
I used m8 and washers for m8 🔩 bolt length 75mm to 100mm measure As well
Excellent video nice thinking with screws 🔥💯
All them rubber washers so u don’t scratch the diffuser, but you’re karate chopping it with ur finger to show us it’s not going anywhere. Haha great content this is flush
i hope u genuinely enjoyed it ... ye was just showing that if i can press on it with abit of force and it wont move then it surely wont move whilst driving // it really is very solid
great video .... so have you had any issues with the diffuser flapping around??
Hello does anyone know the size of the bolt at @9:22 or is it the original bolt? I want to attempt this soon but I just wanna be ready for any modifications ! Lol Thank you in advance ! 🙏🏽 love your videos
Thanks i didnt give a size bolt becuz u can use any size as long as its no bigger then the hole u drill...for example if u drill a hole that is no. 8 drill bit get a bolt that is same size as the hole or only slightly smaller ..u dont want any play so it can secure the diffuser.... remember to use rubber waahers and metal washers too to help hold bolt and diffuser in place..careful not to overtighten as it can break the diffuser.... drill slowly and step up the drill bit size do not just drill big hole...carbon fiber isnt suppose to be drilled into as its very easily broken or cracked... i believe my bolt was a m8 75mm long the length just has to be long enough to go through the diffuser and the mount holes... hope this helps
MIKEYZ VLOGZ thanks man ! It helps a lot I appreciate it . Keep up the good work 😎 I’ll try it today since my diffuser just came in today! I just hope it’s long enough as yours so I don’t have to use the old support mounts
@@johnramirez8538 yes check that first
great video ..... it does look really nice...so much nicer then the standard rear diffuser...well done..are you going to change the exhaust tips???? or just leave them like that
yes i have got the dual 4inch tips with carbon fiber covers on them too to match the diffuser...and i will also get the x pipe and the valve cutoff so i ccan control how loud i want the exhaust to sound
I have a w204 2008 élégance. Will a difuser fit? Cuz l don’t see a small cap between the rearbumper and the difuser. (Sorry for bad english)
hmm it should because it's designed for or w204 models... the Cao is for the tow hook that s rows in .. u might be right..some models don't have it .. I'm not sure ..I'll have to find out for ya
@@MIKEYZVLOGZ thanks, of you can do that it helps me a lot
how did you measure where do drill the side wholes that screw to the diffuser
it was a rough estimate which is why u measure twice cut once
@@MIKEYZVLOGZ okay, hopefully im close, thanks!
so it fits nice and snapped on, did the exact thing with the drilling holes for the support part, but the sides never reached the screw opening for the original diffuser what should i do for that? super glue? anything else i could try?
@@panduhgaming5473 that's really wierd that the diffuser didn't reach the side mounts .. u definitely need to secure the sides too.. did u have to modify the two support bars to the back? as for the sides is there any place to mount it or screw it in
@@MIKEYZVLOGZ im trying to upload a video so you see what i mean. and its really close but idk how to fix it. ill try to figure it out
Great dude and nice work :)
thanks mate hope u enjoy the content ... more to come
Hey mate, great vids and channel! Easy one, looks like you have the 2010 with the AMG pack? I've got the same but a C250. I looked at that exact same diffuser from the same seller but I wasn't 100% sure that it'd fit as sellers info wasn't great, so I emailed them but no response. So if you've got the 2010 with the AMG pack(?) then I think it's safe for me to assume that sellers difusser will fit mine.
So just to confirm, yours has the AMG pack? If so, we've got the same bumper and therefore that difusser will fit and I can go buy it. Thanks bro!
hey mate thanks for the comment... and yes if your diffuser is the same as mine where its flat along the edge ... the facelift version has a rise in the diffuser and isnt flat like ours .... you will notice the difference ...also ensure that the mounting lip is long enough to screw into the mount underneath your car ....where i used the long bolts
Ah yes, I see what you mean re the mounting lip at 1.33sec in the vid. All good, thanks heaps for the response and keep up the good work 👍
@@shaneanderson9064 correct mate that mounting lip some dont go that far out and u would need to cut the mount off your original diffuser in order to be able to mount it .... very important .... good luck with ur install ..im here if u ever have any questions mate ...glad to help the best i can
Perfect. I'll get this one m.aliexpress.com/item/607076552.html?trace=wwwdetail2mobilesitedetail&gps-id=storeRecommendH5&scm=1007.18500.102169.0&scm_id=1007.18500.102169.0&scm-url=1007.18500.102169.0&pvid=f1c575c9-6bcf-4382-bdbe-f4f9dcb6ec99&_t=gps-id%3AstoreRecommendH5%2Cscm-url%3A1007.18500.102169.0%2Cpvid%3Af1c575c9-6bcf-4382-bdbe-f4f9dcb6ec99&spm=a2g0n.detail-amp.store-card.607076552&aff_trace_key=&aff_platform=msite&m_page_id=1197amp-24nZGK13t692wHK-fGt5tg1560397087889 and that'll be that problem solved. Again great job and thanks so much. I'll be watching all your videos now👍
What tool attachment is that for your drill
its a right angle drill attachment
Great video dude.
thanks mate, i really do try to make as informative as possible videos rather then just skipping through the task, i always try to show detailed steps and talk you gusy through them
Is this real carbon fiber?? I seen a web with c class rear diffuser but it says only c63 Amg bumpers wonder if the regular c class fitment is same as c63
as long as the same shape it will fit yes its carbon fiber .... the newer models have a dip.. but the preface have a straight cut for the diffuser.. so as long its the exact same shape as ur car it will fit ..but like in my video.. sometimes u gotta do little adjustments ... bare in mind but overall good fitments friend
Good work bro
thanks buddy
Did you do your quad tips? Did you make a video of that too? :)
I haven't done quad tips yet but I do plan too in future ... however I have been contemplating whether I should ..what do you think ? and I would need to have it installed by a shop that can do exhausts as they will need to.be welded on
MIKEYZ VLOGZ thanks Mikeyz. I was thinking the same, after seeing you take off the diffuser and tip, the pipe looks too huge to fit the amg quad tips. I was really hoping I didn’t have to have a shop cut and weld because then it’s permanent. I’m also skeptical, what if the shop doesn’t measure are weld correctly, and it’s slightly crooked or one sticks out more than the other? That would trigger my ocd haha. Love your videos man!
@@flamecrow actually u can easily fit the quad tips and any for that matter ... what's important is once you remove your factory tips which just screw on like I showed in the video... the pipe that the tips fit on is only about 73mm in diameter... and either way as long as u get an exhaust shop to help weld then on they can modify and even expand the tips to suit your style of quad tips.. truth is once u go to the amg style diffuser theres a gap where the exhaust tips sit so u either centre your tips or go for a nice quad tip design
@@MIKEYZVLOGZ Waiting for you to do this :) www.ebay.com/i/263633507626
Hello where I can find this rear difuser please
ebay and aliexpress sell it
@@MIKEYZVLOGZ thanks I look on Ebay I found now thanks
Amazing!
Thank you! Cheers!
@@MIKEYZVLOGZ i’ve just tried to buy one off your link however they don’t ship to United Kingdom unfortunately, i’ll keep looking some of them do however the bit pricey.
yeah unfortunately certain places don't accept.. but I'm sure if u keep looking on ebay and aliexpress search for w203 diffuser u will find one to ship... it took me a while too
I got mine in the mail I have a 2008 c200 then realized the diffuser on my bumper is not removable so I have a diffuser that I can't put on 😢
hold on ... do u have a diffuser at all? so it's not like mine where u can remove it ? are u sure cuz usually it can be removed
@@MIKEYZVLOGZ it's one piece on the car mate at exhaust shop now can't be fitted there saying I'm useless but look what they are saying is correct.
Diffuser is also for c63 bumper I think so completely messed up will have to try to sell cheap
@tom Brown ahh I see ... fair enough ... hope it all works out .. I guess u will need an entire rear bumper
Will it fit with a towbar?
where does the tow bar fit??? ive never seen one on a w204 depending where the
tow bar is
hey buddy so after some research i found that it all depends on how your tow bar is fitted .... check this page out youll see a video of how eaaily a tow bar cab be fitted and how it depends what type of tow bar you install www.benzworld.org/forums/w204-c-class/1502727-tow-bar-w204.html#/topics/1502727
@@MIKEYZVLOGZ could i send u an email with pictures where the towbar it fitted on my car? because i really like the looks of that aggressive rear diffuser
@@jdl7100 ofcourse you can dear friend ... i am always here to help anyone who is subscribed to my channel thats what im all about ..go ahead
What grease is that
Its just general multi purpose grease to help slide in thats all nothing special
MIKEYZ VLOGZ thank you !
Ur welcome
The diffuser I ordered was carbon fiber with the 3 long shark fins, and it was made out of fiberglass. It was a b_tch to put on, I had to shave here, trim there. The fact that it was fiberglass I had to be extremely careful. But the end result made it worth it. O yeah it took me 6 hours to install.
damn 6 hours ... well the end result is the main thing .... well done
@@MIKEYZVLOGZ Hey Mikeyz or @thebarking2.... I have a 2009 C300 4Matic Sport version (preface lift). I don't mind doing modifications but do you think this will fit? It says it's for c63 amg... does "Sport" on my car mean I have the same AMG rear bumper or trunk as the c63? Here's the item I'm looking at: www.ebay.com/itm/FOR-08-11-BENZ-C63-AMG-BIG-FIN-CARBON-FIBER-REAR-BUMPER-DIFFUSER-TRUNK-SPOILER/223271669272?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649
@@flamecrow so long as ur rear diffuser has the straight line across the off the diffuser it will fit
MIKEYZ VLOGZ Yup, my car is exactly like yours (even the xenon light bulbs which you taught me how to take out) except only my driving seat is on the left, thanks! I’m finally going to do my diffusers after watching your videos almost a year ago.
@@flamecrow then it will fit.... im glad your having a go it really isnt that hars but remember fiber glass is brittle and can break easily its not recommende u drill into fg but i did and it was ok just go slow and be careful..
Why would you put a twin exhaust pipe diffuser on a single exhaust pipe...... DAH ??
cuz I have plans to do a quad tip..dah
Rather then screws it might of been easier with some split pins, but good job
ye maybe ur right .... I just figured why not just screw it in seeing as u cant c it ...hope u can join my channel heaps more videos to come
I wish I can find a video like this for my C218 CLS550 or even a channel that covers C218 and W218 ☹️☹️😔
ye I know how u feel this is why I started this channel
Moral of the story is: Stick to OEM C63 rear diffuser.
lol
Il codice diffusor
??
@@MIKEYZVLOGZ Hello what code has the diffuser for the Mercedes
@@ciaoamg1605 ill add a link for you
Not hating but no link to the diffuser, you expect viewers to have a whole garage of tools and equipment, be realistic
so i hope i answer all your questions.... bare in mind it was my first few videos so i was just getting the hang of what to expect and do
1. DIFFUSER---i bought mine off ebay for 300.... so if you type in w204 rear diffuser you 'll get a number of diffusers to choose from n different styles . the choice is yours.from big fin to even different designs..price is FROM 300aud TO 500aud always shops around from amazon to aliexpress and ebay , but i usuaually use ebay ......heres a link
www.ebay.com.au/sch/i.html?_nkw=w204+rear+diffuser&ssPageName=GSTL&_sop=15
and this is the one i bought and i bargained him down to 300aud
www.ebay.com.au/itm/Carbon-Fiber-Rear-Diffuser-for-Mercedes-Benz-W204-C63-AMG-Bumper-Sedan-2008-2011/263634307251?fits=Plat_Gen%3AW204&epid=19018529783&hash=item3d61d448b3:g:jVAAAOSwY31a1-6j:rk:15:pf:0 hope this helps, i guess you can always ask
2. tools.... to be fair..if your going to work on your own car, especially a Mercedes (as mercs have their own screws and bolts likes torx and e-torx so, your going to have to expect to buy some tools ....now not a whole garage of tools, but just the specifics, which are pretty cheap if you buy a box set .... and the tools would be an investment, rather then paying someone to install it , you can invest in your own tools, that way you'll have them for all future projects....so if you watch the video even though i use more advanced tools, they can all be found on ebay really cheap ...also you just have to improvise ...eventhough i used an attachment to a drill, you dont have to. you can just use a right angle torx bit to remove the rear diffuser and the exhaust tips will take a hex bit...which most tool sets will have for example crescent 170pcs toolset heres another link www.ebay.com.au/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=crescent+tool+set+170&_sacat=631&LH_TitleDesc=0&LH_PrefLoc=2&_sop=15&_osacat=631&_odkw=crescent+ool+set+176&rt=nc&LH_TitleDesc=0 these are great usa made tools and actually what i use for all my jobs....
choose from either 128 which will do.... or 170 which has abit more tools and a 1\4" ratchet for harder to reach areas.....either will suffice...now you can always go cheaper and buy tools separately or buy a really cheap tool set, it will still do...but in my experience its cheaper to buy a tool set...thus your investment
3. so to be realistic, you should expect these things especially working on mercedes benz or any car for that matter ....you cant DIY with no tools, but thats just my opinion......my bad for not pointing this out...so i appreciate the feedback it will help me make better videos....and mention these things to begin with ...hate or not i really appreciate the feedback ...so when you watch any video on diy... theres always tools you need to buy so u can get the job done.... its just the nature of DIY
MIKEYZ VLOGS very good, thank you
ur most welcome...again i apologise for not breaking git down for you, i hope it will not discourage you from trying it yourself....
@@MIKEYZVLOGZ well said mate.... of course you need tools to work on your car ... that's just common sense 😂😉😁