Building a Robot Hand from Scratch
ฝัง
- เผยแพร่เมื่อ 30 ธ.ค. 2022
- This was difficult.
Design inspiration from Mahdi Designs:
• Bionic Hand Grip Testi...
Music by:
Joakim Karud - / @joakimkarud
Ouse - / @ouseofficial
LAKEY INSPIRED - / @lakeyinspired
Sappheiros - / @sappheiros - วิทยาศาสตร์และเทคโนโลยี
I was honestly expecting the robot hand to give me the middle finger near the end.
Good humor, interesting project, good video editing
Keep it up
th-cam.com/users/shorts4umEmbYADc8?feature=share
“Silver is for the kettle, and gold for the furnace, but The LORD is the tester of hearts- Bible” your heart is like discovered silver, dirty and not pure, when silver is purified it is melted over and over, to the point that when it’s melted and glows red hot, it is pure enough to see your own reflection in the puddle, so also does the LORD purify your heart, till HE can see HIS own reflection in it, seek the LORD and be reborn, ask The LORD to renew and restore you, repent and ask The LORD for HIS Salvation for those who seek will find and those who knock the door will be open unto them, no man is good, all are in need of salvation, Jesus died so that our sins will be wiped away and so that we could be made new, seek The Kingdom of GOD for if you would be wise you would be wise for yourself, pick up your cross and deny your flesh and follow the path of GOD, for The Kingdom of GOD is at hand, in JESUS MIGHTY NAME Amen and Amen
@@juanit0tackit0tackito2 Huh?
Him: What humor?
Handy...
That's pretty handy
…
Amazing
Always a good thing when you need a hand
That’s a knee slapping joke
It seems you came here armed and ready.
You should definitely try custom PCB design. So much less soldering and wire spaghetti, and incredibly cheap these days, even with SMD soldering service. Usually cheaper than buying all the separate little boards and soldering them together. Well, cheaper per unit. But usually you have to order at least 5 units, so for a one-off design it is more expensive, and wasteful of components (which are in short supply as it is)
Totally disagree, you still need to solder as many things as you would have to without a pcb, its also much more organised and straightforward.
However like you said, it would be more expensive and wasteful and of course, Gonkee's videos take enough time as is, this would make it even longer if he made mistakes with the pcb design again and again.
If Gonkee possibly invested in a cheap 3018 pro cnc like I did a few years ago, and used it for pcb milling, we could see a lot more content like this and more crazy content, also maybe he could get into stm32 chips and creating boards for them, not just using breakout boards.
lmao imagine trolling a computer programmer to not only switch to robotics, but to make PCBs as well. i have an idea, he should manufacture his own silicon wafers as well! what's the price of failure? just cancer in your 30s is all
Yeaaaaaah.... that is because you live in the US/Canada (probably). You don't have this kind of option in other countries.
@@BerserkSurvival Question: Where do I find more information regarding CNC parameters and differences/uses between models? Won't a Shapeoko CNC work, as well?
PCBs are so overrated. Just use perfboard.
Awesome work and thanks for shouting out my design! It's definitely not easy designing a compact bionic hand but you really did a great job and encountered many of the same challenges as I did. That's an especially challenging project if you were learning CAD at the same time. Your sense of humour and editing skills are 👌😁 I'm not working on my design anymore but fortunately just starting working with a Startup company designing prosthetic arms
Really handy video. I really appreciate how awesome you are as a youtuber and engineer. You didn't need anyone to give you a hand, you did all yourself. Hands down, a very amazing piece you made here.
I think what you did was really great, and I love your sense of humour
That's awesome ... the way you are presenting better than many movie scripts.. keep up the good work ...
Your editing is on point and your writing is excellent. If you don't get a gig at Boston Dynamics, you should consider an open mic.
“Silver is for the kettle, and gold for the furnace, but The LORD is the tester of hearts- Bible” your heart is like discovered silver, dirty and not pure, when silver is purified it is melted over and over, to the point that when it’s melted and glows red hot, it is pure enough to see your own reflection in the puddle, so also does the LORD purify your heart, till HE can see HIS own reflection in it, seek the LORD and be reborn, ask The LORD to renew and restore you, repent and ask The LORD for HIS Salvation for those who seek will find and those who knock the door will be open unto them, no man is good, all are in need of salvation, Jesus died so that our sins will be wiped away and so that we could be made new, seek The Kingdom of GOD for if you would be wise you would be wise for yourself, pick up your cross and deny your flesh and follow the path of GOD, for The Kingdom of GOD is at hand, in JESUS MIGHTY NAME Amen and Amen
@@juanit0tackit0tackito2 Not to be rude towards your religion, but this is completely unrelated to the discussion at hand. Please take it somewhere else, in the most respectful way possible.
Love the humour...great video on how to build a robotic hand. This just shows that with determination one can learn almost anything.
I love the "give it your all" attitude. That hand looks sweet
Great start and awesome video documenting your progress! I would suggest maybe trying to use off the shelf micro servos for an easier approach. N20 motors would need quite a lot of CAD work to integrate well into a hand. Especially when trying to integrate the potentiometers and PCBs.
You did an amazing work!
10/10 attitude and sense of humour. most entertaining + informative (+ being real) video i've seen out of dozens and dozens i watched. keep doing what you're doing! (also lenovo thinkpads FTW...)
That is really nice. I've made a few terrible robotic hands. I'm still building terrible robotic hands and skulls and stuff. What you've done here is really pretty. Thank you for making this. I love your motor choice.
“Silver is for the kettle, and gold for the furnace, but The LORD is the tester of hearts- Bible” your heart is like discovered silver, dirty and not pure, when silver is purified it is melted over and over, to the point that when it’s melted and glows red hot, it is pure enough to see your own reflection in the puddle, so also does the LORD purify your heart, till HE can see HIS own reflection in it, seek the LORD and be reborn, ask The LORD to renew and restore you, repent and ask The LORD for HIS Salvation for those who seek will find and those who knock the door will be open unto them, no man is good, all are in need of salvation, Jesus died so that our sins will be wiped away and so that we could be made new, seek The Kingdom of GOD for if you would be wise you would be wise for yourself, pick up your cross and deny your flesh and follow the path of GOD, for The Kingdom of GOD is at hand, in JESUS MIGHTY NAME Amen and Amen
@@juanit0tackit0tackito2 Ok. Party on. I always did dig that story about a gay hippy who told his bros to leave their families and go fishing with him and party while he does magic tricks and hangs with demons and prostitutes. Seems like you're living that life.
I think that cut-out in the flat of the potentiometer is where something like a woodruff key would go, a little piece that slips in there with a flat on one side to go against the shaft.
As a recent automatics control and robotics graduate, this video resonates with me on a spiritual level
Already love this channel. An actual guide
I have had the same soldering kit for about a year now. works grape
Laughed my arse off and learnt a bunch of things at the same time. Thanks man. 👍
That is how my projects go. Refreshing to see what it really takes to build a project.
Ur videos have gotten better (in editing) recently
Please don't stop posting , I loved it 😂😂❤️
Yes, one solution for soldering is using breadboard. It reduces development time, and changing components. After development you can use custom PCB board and solder SMD components.
It was very amusing to watch and I‘ve also learned something along the way. Thank you.
Just what I need to start the new year!
This is pure gold. Subscribed. I learned something and lol in the process.
You did great, humorously done with serious attitude......
I strongly recommend getting a separate tin of soldering flux. I've found it makes soldering so much easier.
glad i found this, i have a large project coming up, but no a lot of money and room for mistakes
Im so glad the algorithm blessed me with ur channel
This video was a roller coaster, love your sense of humor 😂
Love the engineering content
Really good video dude!! It was interesting and funny 😄 hoping to see more !!
THE LEGEND UPLOADED!!!!!!!
Bro you’re the goat 🐐, keep pushing it man 🫂
This project is pretty great!
Your videos are what makes me get up in the afternoon
Wow this is as mechatronics as it gets. This is one of the coolest, detailed videos.
I thoroughly enjoyed wacthing this!
Dude, you are a Giga Genius! I like the idea with the fishing line.
GLARSES TRANSITIONS!
You did an amazing job
I would also like to repeat this project if I had more free time
Great progress. Good luck 😊
You are god's gift to mankind with these technical and editing skillZ.
You gave me motivation. THNX
Wow, cool project! Do keep on with robotics!
Keep it up, bro!
Instead of jumping straight to soldering all your components together, you should've soldered your lead wires from the components and connected the leads through a breadboard to ensure that your wiring was correct and that all wire connections made to the components were done securely without damaging the component itself. All in all, don't be disheartened by your mistakes, be glad that you not only learned from them but were able to teach others about how you set out to learn by doing. Great video, subbed.
i can relate to that first prototype.
Lol u are like a mix of dani and glarses, i like the humor!
My man is back!~
Keep going. excellent work ✔✔
your sense of humour is fantastic, cant stop laughing, cool hand btw
What do you get when you put your hand in a blender? A handshake.
All I learned was to buy the Lego robot hand kit if I need a robot hand, but I was very entertained. Subbed!
Awesome! Just awesome!
The return of the king
This person can become a stand up comedian someday.
You are so funny, keep on making these amazing videos!
great video, this is channel is very underrated
Agreed. It does not happen very often that I am laughing out loud watching videos, and this video made my day!
Mate...... your a legend
Sick video! keep it up!
Wooo another upload!!!
Siiick, more, more!
i respect this level of dead inside. you are prepared
Great video and love the humor!
very good thank you mister IQ man
That's some good soldering
awesome video, man
good channel, even better delivery
Every single bit of this is relatable
You Missed Such A Golden Opportunity At The End To Flip Us Off
you earned a fan
Love the video!
you inspired me, love your work and meme.
it's 2023 and he uploaded. Hallelujah Dio.
Brother this Is one of the best video on elettronic that i have ever seen. really (Sorry for bad english)
Bro the fucking ChatGPT bit hit hard cuz that shit felt so relatable.
You have a good sense of humor !
I built something similar to this when I was in high school, i had it attached to a glove i wore so the hand mirrored what I did. I was wanting to hook it up to a tens unit to do some rudimentary controls just by flexing
th-cam.com/users/shorts4umEmbYADc8?feature=share
dip your wire tips in flux, like just coat that stuff up, even if you get flux solder. It's a lot easier for new guys at soldering. Dip your soldering tip in the flux also and then you can apply solder easier to the iron, and thus no need to hold the solder wire as much.
Time well spent mate, time well spent.
Great video and humor!
randomly found this channel it is good I am subscribing it
Nobody gonna talk bout the rickroll in background
i wont stop you... you know, this is the one thing you always wanted.
well done!
1:43 Loving your influx of new content so far.
Nice project! Was there any consideration for using mini micro motors, also known as pager motors?
Sarcasm king is back!!
When you cut that pcb on the bandsaw a part of me died a little.
Awesome 👍
can't wait for the Building a Robot Hand with Scratch
I never knew a video about building a robotic hand could make me laugh so much.
As a software engineer I must say you are my personnal hero bruh
*clicked because of robotics, stayed for the humor 😂*
thanks for the video
This video was just constant *vine boom
But seriously, this is actually impressive
Gonkee we missed you!!