Earned my sub. You get a good price. Detroit area here and only getting $150/ton on shred. Still haven't budged on copper and I'm getting frustrated. 2.95 for bare bright and 2.75 for #2. I'm holding onto it if they don't go up at least a little
Yeah, that's ridiculous around here. Number one prices are $3.85 a pound. And $3.75 And the copper price is climbing every day. I suggest get a scale to wake up what you have.. And call a bunch of different scrapyards. Tell them what you have and the weights. And ask what they'll do on the price.. Shop around, don't take a low ball price
love this channel 😎 you said haven't been sleeping well try taking 5 grams of glycine powder and 1mg of melatonin. and taking collagen powder also helps with muscle soreness joints and sleep. thats what I take it helps me sleep deeply and recover well.
It's all in who you know.. It didn't start out this way for me, but over the years It has gotten more and more and I got a lot of people who smartIt has gotten more and more. And I got a lot of people who Have used me in the past, and i'm their first call for scrap metal
Even though you worked hard to get that scrap to haul in for a little payday. I am having to hold mine, we are down on shred, tin and short iron. All of it is below $160 a ton. I'm going to watch and see if it goes back up to at least $200 a ton. Take care and see you on the next video.
No, Only the ones with the round bolt on play on the top.. So if it has the plate and the pipes come straight out the top like in the video, it has a copper coil.
In raleigh county wv it's 7 per hundred or 140 per ton for shred currently and the highest I have seen it was 13 per hundred or 260 per ton about 7 years ago the lowest I have seen was 1.25 per hundred or 25 per ton
I sell my shred regardless even it it down 40 bucks a ton. I had deal with that in Obana adminstaration. When price, many scrap yards closed up and fail doing this period. But I grind though it. Trick is Sell some non ferrous alonf with that load
@Funkybulb Yeah, I process and sell about a million pounds of tin/Shred A year, it's not worth holding on to.. So I separate, and clean what I can to maximize my profit on the non. Non ferrous side..
I have a ford transit van 250 2015 it does not have a trailer hitch I’m thinking of getting one install although I’m not sure how to calculate the total pound haulage I can do not sure how it work how to ad it up Mike can you help me out
I would need to know what engine is in the vehicle. And it's rear end gear ratio.. You can look it up and it'll tell you what it's max towing capacity is.. Every vehicle is different. If you can get me that information I will look it up
$220 a ton for shred is low? Come here to north Idaho / Spokane. $60 a ton.
You should watch the scrap and Pallet man, he's got a good channel too. He's always looking at the brighter side of everything.
Congrats on 5K !!!
Thanks
How much is your license plate tags for the trucks and trailers per year? 😊
@@ssweeps The trailers are cheap. $26 a year. The trucks are what get expensive. Both the trucks combined are over $450 a year to register
Earned my sub. You get a good price. Detroit area here and only getting $150/ton on shred. Still haven't budged on copper and I'm getting frustrated. 2.95 for bare bright and 2.75 for #2. I'm holding onto it if they don't go up at least a little
Yeah, that's ridiculous around here. Number one prices are $3.85 a pound. And $3.75 And the copper price is climbing every day. I suggest get a scale to wake up what you have.. And call a bunch of different scrapyards. Tell them what you have and the weights. And ask what they'll do on the price.. Shop around, don't take a low ball price
Good day for sure. You seemed in a good mood from beginning to end. When crap happens just drink a Lemonade. Great video.
I actually wasn't as grumpy as I. Usually am...lol
I mainly deal in scrap cars and equipment, I never wanted to do small stuff until lately , been hauling a lot of shred , I’m in the Poconos !
Nice
love this channel 😎 you said haven't been sleeping well try taking 5 grams of glycine powder and 1mg of melatonin. and taking collagen powder also helps with muscle soreness joints and sleep. thats what I take it helps me sleep deeply and recover well.
I might have to try that
Hope it goes up! At least you didn't have any fence today 🙃
I am thankful. I didn't have to touch a piece of fencing today.. After that last 💩
Wish I could get loads like this
It's all in who you know.. It didn't start out this way for me, but over the years It has gotten more and more and I got a lot of people who smartIt has gotten more and more. And I got a lot of people who Have used me in the past, and i'm their first call for scrap metal
Even though you worked hard to get that scrap to haul in for a little payday. I am having to hold mine, we are down on shred, tin and short iron. All of it is below $160 a ton. I'm going to watch and see if it goes back up to at least $200 a ton. Take care and see you on the next video.
I wouldn't be able to hold what I get. I would have to open my own scrapyard. L o l
Do all water heater tanks have a copper coil in them I’ve actually never open one 😅
No, Only the ones with the round bolt on play on the top.. So if it has the plate and the pipes come straight out the top like in the video, it has a copper coil.
In raleigh county wv it's 7 per hundred or 140 per ton for shred currently and the highest I have seen it was 13 per hundred or 260 per ton about 7 years ago the lowest I have seen was 1.25 per hundred or 25 per ton
The whole year its been about the same. Its been 170 a ton to 200 a ton which it is now for me.
I sell my shred regardless even it it down 40 bucks a ton. I had deal with that in Obana adminstaration. When price, many scrap yards closed up and fail doing this period. But I grind though it. Trick is
Sell some non ferrous alonf with that load
@Funkybulb Yeah, I process and sell about a million pounds of tin/Shred A year, it's not worth holding on to.. So I separate, and clean what I can to maximize my profit on the non. Non ferrous side..
It goes uo here in Rochester New York at the end of spring
I'm a little north of Syracuse and I'm getting 200 a ton for tin
Have you refined your truck beds?
Dennis
I don't understand what you mean.
Love your channel.. i am like you but i work in Sweden!
Thank you, and that's awesome. I have never been to Sweden. Maybe someday I can make enough money to travel there
If you come to sweden you can go whit me and see swedish scrapping..
They do things a lot different in europe with scrapping.. There a lot more ecologically friendly..
Looks like Weitsman in Scranton !!
You are correct..
Tin shred 270mt
Dealer clips 288mt
Short heavy steel 300
American iron metals
In Canada Ontario Newmarket
I’m thinking prices will remain close to the same until the end of the year
I'm thinking the same exact thing unless something Crazy happens
They usually spike in the summer.
Just keep er rollin. 🇨🇦 ✔️
I have a ford transit van 250 2015 it does not have a trailer hitch I’m thinking of getting one install although I’m not sure how to calculate the total pound haulage I can do not sure how it work how to ad it up Mike can you help me out
I would need to know what engine is in the vehicle. And it's rear end gear ratio.. You can look it up and it'll tell you what it's max towing capacity is.. Every vehicle is different. If you can get me that information I will look it up
@@Adventureswithmike1 Ill get that this weekend
@@Adventureswithmike1 you can find that in owners manual I assume
@ScrapMetalAndOutdoorsWithGiova Sometimes it's not listed in the owner's manual.. Now is this A US truck? Or Do you live in europe
@@ScrapMetalAndOutdoorsWithGiova From what I read, it's between 5000 pounds and 6500 pounds.
I'm getting 200 a ton for tin
It’s going up next month
I hope so
07070
I think the prices will stay lower until Trump drains the swamp!
We need Trump back!