The Heli will not apply negative pitch like you mention until you're in Idle up...when in normal mode it still flies like a collective pitch Heli. Nice review tho, lovely heli 😊
The new toys are great, I learned to fly helis in the late 70's. 5 ft rotor with a 2hp nitro engine would take your head off if it malfunctioned and came at you. Still today the linkages are just as delicate and one bonk and the repair bill is great. That's why I just love my quads.
"Still today the linkages are just as delicate and one bonk and the repair bill is great." Not at all. First off, the flybar is gone. And then going further to DFC reduces the parts count further. I've crashed my M2 V2 quite a number of times now. I've replaced feathering shaft, but zero head parts or linkages. Rarely do I need to replace head parts or linkages in minor crashes all the up to my TREX 800. It is night and day difference just compared to the early 2000s, let alone 1970s. The designs are really built to be crashed with a minimum possible repair bill. It makes a huge difference. The 800 make a peak of 14 HP, btw.
Hi Steve! Thanks for your review. There might be an M1 in my future! I just picked up a barely used M2v2 and I've been setting up different versions on my RM TX16S. The OMP flight controller uses OMP's own protocol, which has been supported by the Multi-Module since v1.3.1.59. There are videos showing setups that mimic OMP's Tx. However, you can connect a satellite Rx from Spektrum (via the DSM/X port on the FC) or Futaba or other SBUS Rx (via the SBUS port) to use those protocols. BTW, your T6 Tx illustration is for Mode 1. No biggie!
Found a used M1 with 5 batteries and over $40 in spare parts on RC Groups. Couldn't pass it up! Looking forward to getting it. Now, I'll have the M2v2 for outside and the M1 for inside and outside (on calm days.)
Thank you for another wonderful video captain drone!! Have you considered doing a video of the tricks you can do while flying fpv like barrel rolls, back flips, split-s, etc…. And explain how to do the trick that would be awesome……asking for a friend??!!!…. Lol
It's not that you don't know how to fly 3d.. hovering a cp helicopter is like taking a ride on a bike..you have a balance you learned when you started..it's not hard but it's necessary ,or you will fall if you didn't have that balance..but if you fly drones in acro,you are already half way there you can't feel the balance but it's a eye finger muscle memory
@@CAPTAINDRONE798 I know that they are really good Rc vehicles Steve! 8 min flying time is also impressive as they have a small battery... But I think so that eachine should make more powerful batteries which can supply more power to the helicopter to fly for more than 20 mins like DJI drones!
The fall is when I usually make my summary of best drones for 2021 due to everyone wanting a drone for Christmas. I may make an FPV one this year as well.
Great fun videos...even for a 3D guy. You are ready to SIM SIM SIM. Stop flying in safe mode. Get past the drone thing and start doing aileron rolls and elevator flips. Its easy if you sim first. This helicopter is actually a pro level micro with insane power. Dont be fooled by the cheapo transmitter or pilot's skills in this video.
You clearly aren't prepared or knowledgeable enough to fly something like this if you think anything like this comes with a camera. You don't even specify if you mean FPV or photography, but it's a moot point either way.
was thinking about getting my dad one of these WITH the radio you have here. since i do not seem to be able to find the heli bundled with the radio, i assume you have to buy both separate and bind them? then, in terms of set up, for stability mode, stunt modes, etc- does that all just automatically get set up when you bind to the stock OMP radio shown here? or do you have to program it somehow?
The helicopter and radio are from the same company. They bind together very easily. The stability is built in, and when you turn it off, you can do stunts.
you said it… It is so small better be careful because it will instantly be out of sight and you'll lose it. Honestly I have one and you have to fly it so close all the time. Takes away some of the fun because it's too small and hard to see. I would not recommend it for a beginner or anyone just because of its size. Small is not a good thing …
What software do yall use to filter or smooth out your drone shots? Also if I'm gonna upload drone videos do I have to get the part 107 lisc? I'm not doing it for profit. No ads, no promoting. Just create and enjoy!
I don't use any software to smooth out drone shots. Your question is for the American FAA it seems. I'm a happy Canadian flying in Canada (we have different regs).
Oh in totally forgot that info. Your footage always seems so clear and not shaky. I watched your reviews on the Holystone 720e and have been flying it every chance I get. So far so good just looking for pointers on how to get better image quality or resolution
Any suggestions replacing tail fin/motor mount on omp m1. Looks like motor needs to be disconnected in order for fin to slide off shaft, I don't know how to do this, help pls
I don’t have the M1 anymore but I can say most helicopters attach motor/fin to tail boom by two screws in the boom. There should be an exploded diagram in the manual.
i have a question, nice vid btw, i want to buy the jumper t lite controller for my first controller and my first fpv drone will be the geprc cinelog 25 (analog version)... in the bangood link there are choices of what receiver i will pick, the choices are Frsky-XSR and TBS crossfire nano RX , in those receivers what do you recommend for the jumper t lite radio? THANKS
Anton. The T-Lite will not bind to any of those. You could get it to work with the TBS Crossfire, but you'd have to spend extra cash to purchase a crossfire unit for the T-Lite... not worth it for a newbie. If you wish to use the T-Lite radio as a beginner it would be best to find a drone that has an FRSKY XM+ receiver in it. Then you can watch my FPV FOR BEGINNERS episode #9 which shows how to setup your radio and bind it to the drone.
@@CAPTAINDRONE798 the the geprc cinelog 25 has a FRSKY XM+ receiver on it i asked GEPRC soo does that mean that i can use the jumper t lite with it? the only reason i like the jumper t lite is the price
It is very rare that if someone flies drones, that they remain as ONLY a drone pilot for their life. Most drone pilots I know all fly other items as well (Planes, Helicopters).
@ matterh Well for me personally (and I’m sure for others) it’s FAR more challenging to fly a CP heli than a drone. I’m still learning to do nice tight circuits…mostly from relying on stability for far too long. I kind of feel like I’m im a select group of people who even attempt to master these things, hence why they’re nowhere near as common as other RC vehicles. Our hobby shop in town only has a few helis while they have loads of trucks and cars….but hey they’re easy in comparison, even fixed wing planes are considerably easier. Also being a bit of a masochist helps in terms of crashing and repairing.
![เปิดใจ “ต้นหอม ศกุนตลา” หลังโดนพาดพิงธุรกิจที่เคยทำ และผลกระทบทำถูกปลดฟ้าผ่า! | แฉ 24 ต.ค.67 [2/3]](http://i.ytimg.com/vi/vCi5OIqlxaE/mqdefault.jpg)
The Heli will not apply negative pitch like you mention until you're in Idle up...when in normal mode it still flies like a collective pitch Heli. Nice review tho, lovely heli 😊
The new toys are great, I learned to fly helis in the late 70's. 5 ft rotor with a 2hp nitro engine would take your head off if it malfunctioned and came at you. Still today the linkages are just as delicate and one bonk and the repair bill is great. That's why I just love my quads.
"Still today the linkages are just as delicate and one bonk and the repair bill is great."
Not at all. First off, the flybar is gone. And then going further to DFC reduces the parts count further.
I've crashed my M2 V2 quite a number of times now. I've replaced feathering shaft, but zero head parts or linkages.
Rarely do I need to replace head parts or linkages in minor crashes all the up to my TREX 800. It is night and day difference just compared to the early 2000s, let alone 1970s. The designs are really built to be crashed with a minimum possible repair bill. It makes a huge difference.
The 800 make a peak of 14 HP, btw.
Hi Steve! Thanks for your review. There might be an M1 in my future! I just picked up a barely used M2v2 and I've been setting up different versions on my RM TX16S. The OMP flight controller uses OMP's own protocol, which has been supported by the Multi-Module since v1.3.1.59. There are videos showing setups that mimic OMP's Tx. However, you can connect a satellite Rx from Spektrum (via the DSM/X port on the FC) or Futaba or other SBUS Rx (via the SBUS port) to use those protocols. BTW, your T6 Tx illustration is for Mode 1. No biggie!
Oh... that explains why we were flipping the wrong switches :-)
Found a used M1 with 5 batteries and over $40 in spare parts on RC Groups. Couldn't pass it up! Looking forward to getting it. Now, I'll have the M2v2 for outside and the M1 for inside and outside (on calm days.)
Thank you for another wonderful video captain drone!! Have you considered doing a video of the tricks you can do while flying fpv like barrel rolls, back flips, split-s, etc…. And explain how to do the trick that would be awesome……asking for a friend??!!!…. Lol
It's not that you don't know how to fly 3d.. hovering a cp helicopter is like taking a ride on a bike..you have a balance you learned when you started..it's not hard but it's necessary ,or you will fall if you didn't have that balance..but if you fly drones in acro,you are already half way there you can't feel the balance but it's a eye finger muscle memory
MORE HELICOPTERS! Yes please. 👍😎
Hey Cap't. Just stopped by to say... Hope you and family had a great 4th. Thanks for all you do.
Thank you for the kind wishes. I’m Canadian so we celebrate Canada Day on July 1st (same type of celebration as the USA)
Outstanding Brother Steve, It looked very High quality, Thank you for Sharing. Sincerely your freind from Mo Rick and God bless you and your family
Another great Captain Drone production
Bangood says it's futaba compatible not spectrum
Yes, Spektrum as well. There is a spot for the receiver. Check TH-cam and you’ll see people flying with Spektrum radios.
Excellent Video, Review, and Information On The OMP Hobby M1 Brushless Helicopter!! I really enjoyed it!!
Cool looking little toy.
You're getting better at rc helicopters! :)
Cool video!
Best helicopter
Nicee little heli right there. Nice little review CaptainDrone. Keep the reviews coming. Love them all.
this copter looks fabulous!
Amazing review about this rc helicopter Captain Drone
Great job as always Steve!
But, I think that the flying time of helicopters can be improved by the companies!
I’m a super newbie at flying helicopters with only a few hours of stick time. In stability mode I find them so simple to fly.
@@CAPTAINDRONE798 I know that they are really good Rc vehicles Steve!
8 min flying time is also impressive as they have a small battery...
But I think so that eachine should make more powerful batteries which can supply more power to the helicopter to fly for more than 20 mins like DJI drones!
Nice helicopter
That intro is sick!
Another wounderfull review I've got the m2 have not flown it yet but soon I hope.
Your getting pretty good at Heli
Hi captain, could you make a video on the best fpv drones, no worries if not.. I've been watching you for almost a year now, I know who to trust haha
The fall is when I usually make my summary of best drones for 2021 due to everyone wanting a drone for Christmas. I may make an FPV one this year as well.
@@CAPTAINDRONE798 alright thanks mate 👍
Awsome heli rc
Will it fly with a go pro strapped on it ?
Nice video! Been thinking of buying a micro since the demise of my xk k123
Looks cool
I like it have fun
Another good video Steve.
Why do I always want the price? Well, in US dollars the M1 costs $250. But, if you want to learn and have fun like Steve, it's a buy!
I bought it but i come from the fpv corner and have no clue how to set that nice heli up xD
Looks really cool with the collective pitch and the direct drive motors
did you get the rtf version?
Look at Buddyrc and jonas setup in YT. Get the TX16S. So easy
Great fun videos...even for a 3D guy. You are ready to SIM SIM SIM. Stop flying in safe mode. Get past the drone thing and start doing aileron rolls and elevator flips. Its easy if you sim first. This helicopter is actually a pro level micro with insane power. Dont be fooled by the cheapo transmitter or pilot's skills in this video.
1000 times this.
I would consider this thing WITH a decent built-in camera. Suggestions?
its A cp heli it wasnt designd with cams in mind
You clearly aren't prepared or knowledgeable enough to fly something like this if you think anything like this comes with a camera. You don't even specify if you mean FPV or photography, but it's a moot point either way.
I'm late again nice helicopter Steve, I have a helicopter but I need a battery for it.
was thinking about getting my dad one of these WITH the radio you have here. since i do not seem to be able to find the heli bundled with the radio, i assume you have to buy both separate and bind them?
then, in terms of set up, for stability mode, stunt modes, etc- does that all just automatically get set up when you bind to the stock OMP radio shown here? or do you have to program it somehow?
The helicopter and radio are from the same company. They bind together very easily. The stability is built in, and when you turn it off, you can do stunts.
Amazing its so cool 😎
Another perfect review. Wow man. Very good. You make it look so easy. Allwsys enjoy a new "Caprain Drone" video.
Thank you! Helicopters in stability mode are really simple to fly.
Skip to 4:00. You are welcome.
Then everyone who asks a question, I’ll refer them back to the start of the vid.
awsome
Hi it looks nice
But you need to buy a charger buy to if iz your first helicopter right?
If a battery charger was not shown in the unboxing portion of the video, then you will need one.
you said it… It is so small better be careful because it will instantly be out of sight and you'll lose it. Honestly I have one and you have to fly it so close all the time. Takes away some of the fun because it's too small and hard to see. I would not recommend it for a beginner or anyone just because of its size. Small is not a good thing …
Nice video again captain drone 😍
How about the Eachine e160?
I've got 2 of them awesome heli
Nice video Steve, I've never flown a RC copter would it be like flying a kwad in acro?
What software do yall use to filter or smooth out your drone shots?
Also if I'm gonna upload drone videos do I have to get the part 107 lisc? I'm not doing it for profit. No ads, no promoting. Just create and enjoy!
I don't use any software to smooth out drone shots. Your question is for the American FAA it seems. I'm a happy Canadian flying in Canada (we have different regs).
Oh in totally forgot that info. Your footage always seems so clear and not shaky. I watched your reviews on the Holystone 720e and have been flying it every chance I get. So far so good just looking for pointers on how to get better image quality or resolution
@@richardstephens5347 It all comes from years and years of flying drones (I've been at this since almost 2014)
I need mode 2 not 1 is it possible?
Yes
Always nice video
nice video sir.
@CAPTAIN DRONE
#OHOOO NICE
Any suggestions replacing tail fin/motor mount on omp m1. Looks like motor needs to be disconnected in order for fin to slide off shaft, I don't know how to do this, help pls
I don’t have the M1 anymore but I can say most helicopters attach motor/fin to tail boom by two screws in the boom. There should be an exploded diagram in the manual.
Cool
Does it work with eachine t16s? I know you said that it works with a radio master t16s but just wanted to ask. Also, captain Mavic air 2s or air 2s?
Yes it works. Check out buddyRC with Jonas m1 setup om YT. Eachine is the rebranded radiomaster
LZ ready for landings
m2 been in the market for over 18 months and the e180 is a clone or a copy of m2
i have a question, nice vid btw, i want to buy the jumper t lite controller for my first controller and my first fpv drone will be the geprc cinelog 25 (analog version)... in the bangood link there are choices of what receiver i will pick, the choices are Frsky-XSR and TBS crossfire nano RX , in those receivers what do you recommend for the jumper t lite radio? THANKS
Get the TX16S. And always rxsr or xm+ receivers. Dont bother on the jumper. Take my advice!
Anton. The T-Lite will not bind to any of those. You could get it to work with the TBS Crossfire, but you'd have to spend extra cash to purchase a crossfire unit for the T-Lite... not worth it for a newbie. If you wish to use the T-Lite radio as a beginner it would be best to find a drone that has an FRSKY XM+ receiver in it. Then you can watch my FPV FOR BEGINNERS episode #9 which shows how to setup your radio and bind it to the drone.
@@CAPTAINDRONE798 the the geprc cinelog 25 has a FRSKY XM+ receiver on it i asked GEPRC soo does that mean that i can use the jumper t lite with it? the only reason i like the jumper t lite is the price
@@antonlianpascua5099 Yes, XM+ is perfect for T-LITE radio
Does it have safe mode?
It has STABILITY mode
Nice review ❤️
They should have made the switch back to lock and forward to unlock
Nope. Not for helis. That is aso users in emergency situations. Toward is easier to hit fast.
I'm not too sure what the appeal is in helicopters when you can have a drone with an awesome camera on it, and battery life atleast doubled.
It is very rare that if someone flies drones, that they remain as ONLY a drone pilot for their life. Most drone pilots I know all fly other items as well (Planes, Helicopters).
@ matterh Well for me personally (and I’m sure for others) it’s FAR more challenging to fly a CP heli than a drone. I’m still learning to do nice tight circuits…mostly from relying on stability for far too long. I kind of feel like I’m im a select group of people who even attempt to master these things, hence why they’re nowhere near as common as other RC vehicles. Our hobby shop in town only has a few helis while they have loads of trucks and cars….but hey they’re easy in comparison, even fixed wing planes are considerably easier. Also being a bit of a masochist helps in terms of crashing and repairing.
Link for number five in giveaway isn't working
Could be due to your browser or country. Questions will change again this week with new links.
Ok thank you
🚁
Nice vedio
Wow, big thanx from Russia 🇷🇺
Trust me you can break it you can break any of them
not for video taking too much vibration
I own 2
I got mine today and crashed it at the same day guess who's having a bad day
Did it survive? The trick is to always hit the hold switch seconds before hitting the ground to avoid any damage.
Barely showed any 3d flying if any
Jack found it too windy for the drone
Bro if you do giveaway of this I want to win because it's low noise in our there no store for drone and helicopter
Could you rewiew the Hubsan ZINO pro plus please, I mean I love your videos but this one hmm.. I don't liked sorry 😐
Anyone know when the drone giveaway is going to be?
Maybe on July 11
Please give me one as a gift for my B-day this august
Start working buddy
U need cameraman
Can i have this copter dor free ?
I want have this copter but dont have enough money dor buying 😭😭😭
Are you can gift for me bro ?
1st comment
Nice helicopter