Great video for someone that is very busy by the looks of it. Thought maybe having cold showers would make you better in cold places lol. But it has been very cold. Keep safe and well. Cheers Marcus for top up on the video. Great bit of kit them taps. Well done
Another great Video Pete! Never have that knife in your pocket outside the van or the job!!!! Thats jail time in the UK just for carrying! Especially flick knives.
An interesting one. As a retired fed I can say that if it's in your toolbag in your work van you're probably fine, but it is a lock knife, so keeping it in your trouser pocket in the pub after work (even by mistake) is a definite no no.
Pretty sad that you can’t carry a pocket knife in the UK. Glad I still can in the Netherlands, though it’ll probably be banned one time or another. Not that it helps, most attacks happen with kitchen knives and the like.
I just got my 8.0 Solder bag from Toni. I ordered it on Tuesday night and UPS delivered it Friday midday. Mind you I’m in the Northeast United States. Outstanding service and a great bag. Thanks to you both.be safe.
Loving all the content, though as I'm not a gas safe engineer I'll never work inside a boiler. Been doing my own rad and tap swaps for years though. Well done for highlighting MH, I'm retired from a difficult job and have certainly suffered myself with trying to juggle problems at work and home. I'm laid up just now recovering from some broken bones and I've got a lot of anxiety as it looks like my wife is trying to re-arrange my garage 🤪
My chum had a replacement gas boiler slung in by the ‘big firm’ - the boiler itself was 30mm out of vertical, the magnaclean was fitted to the return line above the boiler - but so close to the ceiling that you would be unable to take out and clean, the ‘boiler flush’ was a 15 min job with no preparation in terms of system cleanser. They were in and out in about 4 hours flash to bang.
I have had the same issue with a boiler fitted by Heatable, I know it wasn't flushed, they know it had has not been flushed, but they're absolutely not interested in doing anything about it. Absolutely disgusting customer service from them. Great video's by the way 👏
That knife isn't street legal so only have it with you during working hours, nice though. That fancy tap, heater, filter and cooler setup is pretty swanky. I remember 12 odd years ago, one of my clients spent somthing like £3-4k for a swanky tap that done instantanious hot water. I know the tank ones are very well insulated now, do you think they are worth being fed from a 7 day timer?
All the TH-cam videos I usually watch now are TH-cam videos on plumbing (but mostly heating). PB plumber, heating geek, Alan hart, mental gas man and many many more. What’s wrong with me? Lol Anyone know what happened to heating geek? Where did that guy go? Anyhoo. Hope you keep the videos coming PB. Love the stuff you put out.
It is amazing to us in USA that the small boiler heats everything my heat boiler is Hugh and my hot water heater holds 55 gallons Well too much money to be wasted here in the us
Great content could anyone help me with this question An agricultural premise is exempt from the requirements of the Gas Safety (Installation & Use) Regulations with the exception of which parts?
Hi Peter, great content as always mate. Not relevant to this video but have you ever had to fix a pulsing show pump when it’s turned off, I guess it’s air in the system possibly being draw from the expansion pipe. Just looking for any guidance how to stop this happening cheers for any help Eddie
Better keep that knife in your tool box, not in your pocket, when moving between job sites/out on the street. It’s not UK legal ie it’s a locking knife. It does look a quality knife though.
In my opinion, always hang the rad straight regardless of the window ledge. Show the customer with the spirit level that your work is straight. Although I understand your point of view, the customer could care less, long as it looks level with the ledge. Great video as always
Well done pb really enjoy you're content, nice end with Marcus, you guys smashing it!!
Great vid as allways PB. Love your videos theyre so informative for a newbie to the industry. Lovely install by your m8 too.
Great content Pete, love all the install and repair vids, good work matey
How did u remove the panel in the kitchen sink to redirect the waste pipe?? We think it is more interesting for new plumber in the field!!!
Great video for someone that is very busy by the looks of it. Thought maybe having cold showers would make you better in cold places lol. But it has been very cold. Keep safe and well. Cheers Marcus for top up on the video. Great bit of kit them taps. Well done
Went to tool monster today what a set up and thanks for sharing
Country file followed PB plumbing what more could a man want on a Sunday evening. As usual top quality video from quality tradesmen .👍
Another great Video Pete!
Never have that knife in your pocket outside the van or the job!!!! Thats jail time in the UK just for carrying! Especially flick knives.
I can second this. I know first hand of a case where that happened. Be careful!
An interesting one. As a retired fed I can say that if it's in your toolbag in your work van you're probably fine, but it is a lock knife, so keeping it in your trouser pocket in the pub after work (even by mistake) is a definite no no.
Pretty sad that you can’t carry a pocket knife in the UK. Glad I still can in the Netherlands, though it’ll probably be banned one time or another.
Not that it helps, most attacks happen with kitchen knives and the like.
Physique is looking on point hard work pays off!
Thank you for contributing to charity.
I just got my 8.0 Solder bag from Toni. I ordered it on Tuesday night and UPS delivered it Friday midday. Mind you I’m in the Northeast United States. Outstanding service and a great bag. Thanks to you both.be safe.
Simply great content of a normal day in the lives of plumbers. Well done.
Smashing out the content.. Well done PB 👌
that was close, literally just boarded the plane ✈️
@@PBPlumber when will I get a either a head or body mount for the camera ??
Great episode brother
Loving all the content, though as I'm not a gas safe engineer I'll never work inside a boiler. Been doing my own rad and tap swaps for years though. Well done for highlighting MH, I'm retired from a difficult job and have certainly suffered myself with trying to juggle problems at work and home. I'm laid up just now recovering from some broken bones and I've got a lot of anxiety as it looks like my wife is trying to re-arrange my garage 🤪
My chum had a replacement gas boiler slung in by the ‘big firm’ - the boiler itself was 30mm out of vertical, the magnaclean was fitted to the return line above the boiler - but so close to the ceiling that you would be unable to take out and clean, the ‘boiler flush’ was a 15 min job with no preparation in terms of system cleanser. They were in and out in about 4 hours flash to bang.
Another great video, Peter!
Nice to see Marcus chipping in with some content 🤣 great work matey
That radiator bit killed me🤣
Have a safe journey mate 👍
I have had the same issue with a boiler fitted by Heatable, I know it wasn't flushed, they know it had has not been flushed, but they're absolutely not interested in doing anything about it.
Absolutely disgusting customer service from them.
Great video's by the way 👏
That knife isn't street legal so only have it with you during working hours, nice though. That fancy tap, heater, filter and cooler setup is pretty swanky. I remember 12 odd years ago, one of my clients spent somthing like £3-4k for a swanky tap that done instantanious hot water.
I know the tank ones are very well insulated now, do you think they are worth being fed from a 7 day timer?
Hello from u s a. You guys put our plumbers to shame they press everything or pex
Fantastic mate
Than you Petey!
That radiator that only started leaking the day before ,I nearly shit myself laughing it always happens 😆
Hi what areas do you work.Top plumber
You can blue sections of the video within TH-cam, just so you know :)
I didn’t see the point in crimping that little bit of pipework underfloor
I bought my velocity rough 3.0 from tool monster, for everyone in Ireland there is no customs or any additional charges for delivery into ROI
Hi Peter well done mate great jobs as always ❤️👍🏼💐🙂
All the TH-cam videos I usually watch now are TH-cam videos on plumbing (but mostly heating).
PB plumber, heating geek, Alan hart, mental gas man and many many more.
What’s wrong with me? Lol
Anyone know what happened to heating geek? Where did that guy go?
Anyhoo. Hope you keep the videos coming PB. Love the stuff you put out.
I think heating geek moved over to the commercial side of things more and stopped the videos at that point. I'm sure he said he'll be back though 🤞
Defo bg that done that “flush”
It is amazing to us in USA that the small boiler heats everything my heat boiler is Hugh and my hot water heater holds 55 gallons
Well too much money to be wasted here in the us
Great content could anyone help me with this question An agricultural premise is exempt from the requirements of the
Gas Safety (Installation & Use) Regulations with the exception of
which parts?
Anyone else getting a lot of leaky diverter valves on baxi 600/800s a year or two old ?
when does the addicted to tools trade legend podcast come out? i cant wait!
Hi Peter, great content as always mate. Not relevant to this video but have you ever had to fix a pulsing show pump when it’s turned off, I guess it’s air in the system possibly being draw from the expansion pipe. Just looking for any guidance how to stop this happening cheers for any help Eddie
Some pumps need non return valves fitted
Something was tight on Sunday an that was your top 😂 apart from that keep it up 👍🏻
Brilliant PB... where did you get the lagging tool 🧰 from geeze 🧐
🔧👍🏾
No worries mate 😊
I've ordered it 📦👍🏾
Tidy work
Where did you get your pipe lagging tool from ? Can never get it looking as good as that 🤦♂️
Please mate I'd like to know the answer to that question too. 😬
Search pipe lagger pro there are other options out there too
I suppose you I could make a couple angles with waste pipe and a mitre saw 🤔
Ammo crate from N.I. Someones having the craic
Jesus mate you’re looking ripped as
Do you like the testo 300 or not ? nice video by the way :).
Skip introductions 2:55
Buying my first press tool tomorrow. Which would you recommend pb?
dm your number on instagram i’ll give you a call tomorrow
Someone's going to do a 'Natty or Not' video on you soon Pete.
haha i would love that 🤣
Them t-shirts be getting smaller
Great video as usual.
But be careful Illegal to own, import or sell knives like that in the UK. Probably shouldn't be advertising it in your video!
Better keep that knife in your tool box, not in your pocket, when moving between job sites/out on the street. It’s not UK legal ie it’s a locking knife. It does look a quality knife though.
In my opinion, always hang the rad straight regardless of the window ledge. Show the customer with the spirit level that your work is straight. Although I understand your point of view, the customer could care less, long as it looks level with the ledge. Great video as always
Ask the customer how he wants it, he is paying he can choose.
🤘😎🤘
As always great video and ordered through MONSTERPB, 10% off, saving postal my knipex smooth jaw pliers. Thanks, steve
Give the 10 year old his T-shirt back . Get a grip 🤦🏿♂️
it’s a nike base layer, it’s meant to be tight and it’s size is XL so i doubt it would fit a 10 year old unless the kid was obese 🔔 🔚
@@PBPlumber 🎣 steady big boy 👨🏿🔧!
Can you please start wearing some baggy tops as your putting the rest of us to shame….