a small addition for rendering and even meshing: you can use the Render Tools/ *Apply Edge Softening* to eithet fillet or chamfer ALL of your objects edges. This fillet is applied on the mesh non destructively, you can change it to chamfer or reduce it/remove it anytime. It will only appear when rendering or converting to mesh, which is very handy, together with *Curve Piping* and *Shutlining* . Snaps work on the original object, without the Edge Softening. A very handy tool that we usually forget.
Sweet! Thanks for the video. Never used Rhino before and this is exactly what i was looking for. Only difference is that instead of the superman symbol, I wanted a square diamond shape on top. Bloody Legend! :3
Hey PJ. great video. I made a surface using Sweep2. I edit a cross section but the surface doesn't update. is there a setting to have a live update or do I have to apply a new Sweep2 every time I tweak something? thanks.
YES! Record History was it. Thank you so much. Awesome. I found the History panel but I would still like to enable the toolbar at the bottom with the shortcuts, if you know how. Thank you :)
For some reason my surfaces won't go smooth as yours after the 2 sweep, it gets all messed up even though I did just as you showed! Could it be that there's a setup I messed up??
@ 11:11 How were you able to just highlight the edge of the logo without highlighting the inside of the logo, if their joined? I can’t seem to be able to use sweep rail 2.
My shank curves are open but they are both joining the top cross section which is a closed curve. I used the snap tools. How do i make the sides closed curves? Sorry I’m new at this. Thanks for your help. I love the videos!
I’ll watch it , thank you, Also I followed your fox ring guide and made the ring but when I Boolean union it , it Boolean difference it instead... I tried restarting the program but still doesn’t union do you know why?
![30 ชั่วโมงคนเดียว บนรถไฟชั้น 3 โซเวียต [Around The World Ep. 2]](http://i.ytimg.com/vi/MlE9boAVqDA/mqdefault.jpg)
Thank you PJ CHEN. I am learning a lot from your classes. Always be happy.
Super!!
Love your videos. Very easy to follow and understand.
Thank you for the 1 on 1 help!! PJ is the best!!
you are welcome.
Another great video. I enjoy spending my Saturdays working on Rhino.
thank you. let me know if you have any question that I can help. have a great weekend
I've learned lots of new things today :) Offset, move, extend curve, complicated Sweep2, Cap, & chamfer ! Thank you!!
Super!
So helpful! Thank you!
You're so welcome!
Well done! Ellipse on the bottom, was new, then punch thru! I’m gonna try it now👍🏻😃
cool. I am glad you like it. check out my other videos, you will find a lot of useful tips. ^_^
Thanks...very easy to understand.. Very much helpful
Excellent. Job
Glad you liked it!
your work is amazing, and your teaching style is fantastic. thank you very much for all your lessons.
Thank you Poya, I will do my best to create and share quality videos!
congratulations for your work, very nice, a hug from Brazil.
Hello from USA!!
a small addition for rendering and even meshing: you can use the Render Tools/ *Apply Edge Softening* to eithet fillet or chamfer ALL of your objects edges.
This fillet is applied on the mesh non destructively, you can change it to chamfer or reduce it/remove it anytime.
It will only appear when rendering or converting to mesh, which is very handy, together with *Curve Piping* and *Shutlining* .
Snaps work on the original object, without the Edge Softening.
A very handy tool that we usually forget.
I really love it sir, the way of making is so smooth and a easy way. I really do love it. Thank you
that is great!
PJ is not a sir, she is a Miss.
Thank you very much! you're a great teacher!
You are very welcome, Bran.
Fantastic like always!
Thanks, Ali!
very nice
Thanks
Thank you Sensei 👏
You are welcome
Thanks 👍
Welcome 👍
awaited furniture lessons in making jewerly pendants.
furniture lessons?
@@PJChenJewelryDesign how to make a diamond covered letter pendant ... I
Ty so much that was weell delivered
You are very welcome!
great video!!
Glad you liked it!
good stuff PJ
Thanks!
Sweet!
Thanks for the video. Never used Rhino before and this is exactly what i was looking for. Only difference is that instead of the superman symbol, I wanted a square diamond shape on top.
Bloody Legend! :3
You are welcome!
Thank you so much.
You are welcome!
Hey PJ. great video. I made a surface using Sweep2. I edit a cross section but the surface doesn't update. is there a setting to have a live update or do I have to apply a new Sweep2 every time I tweak something? thanks.
make sure you turn on the Record History when you use command
YES! Record History was it. Thank you so much. Awesome. I found the History panel but I would still like to enable the toolbar at the bottom with the shortcuts, if you know how. Thank you :)
Great. 👍
Thanks 👍
Nice
👌👌👍👍
^_^
For some reason my surfaces won't go smooth as yours after the 2 sweep, it gets all messed up even though I did just as you showed! Could it be that there's a setup I messed up??
It is hard to know the issue without seeing the model. I am just guessing- when you do sweep 2. do you pick rail on the same end?
@@PJChenJewelryDesign Nevermind, I just found what I was doing wrong! :) Thanks for the fast reply and concern!
on your offset crv you can use 'through point' option if you want to enter the distance by eye...
schmidtpe That is a great tip. Thank you for sharing.
can u pls do more signet ring (which has square,rectangle shapes)design,
I have few videos about signet ring. you can search "signet" onmy channel. other type of angular shape will be similar with this one for building
Thank you so much mam
Could have been done with network surface command instead of sweep 2 rails right?
Praveen Dev Yes, it is possible to do it with newwork. The result is similar but different surface structures.
@ 11:11 How were you able to just highlight the edge of the logo without highlighting the inside of the logo, if their joined? I can’t seem to be able to use sweep rail 2.
you may group your logo. just need to ungroup it and join the outer curves together
@@PJChenJewelryDesign thank you 🙏🏾
Dear pj how can I make star signet ring in rihno???
it is actually the same method just replace to top shape into star shape.
I was wondering how to trace a more intricate model,now i know,sure miss Illustrators pen tool,LOL.
^_^
I did just like you said, still it shows this "Select either open or closed curves, but not both." Please help
when you do sweep. you can only choose open OR close curves for rails. You may want to check on your rail curves. They may not be the same.
J surface with hinch
Can’t get sweep 2 rails to work. It says that it can’t join both open and closed curves. Suggestions?
yes, please check both your cross session are closed curve. especially the one on the top. make sure they all join.
My shank curves are open but they are both joining the top cross section which is a closed curve. I used the snap tools. How do i make the sides closed curves? Sorry I’m new at this. Thanks for your help. I love the videos!
you can send your model to my email at pj@pjchendesign.com, I will take a look for you
Hii pj please also upload earring j design
now sure what is earring j
Like earring hanging in j part
J surface with hinch
hi can you make a video of a eternity ring with one cilinder between two gems
yes write me your e mail and i send you i can t put on youtube
thanks i did't think that
could you do a video for the attachment of a pendent to a necklace
and a video of a cuban link
cannot get the end point line after swipe 2 rail
do you click on the point in the option and click on the end point of the rail when sweep?
@@PJChenJewelryDesign yes i clicked on the point and also end point but all gets back to normal
@@ananyasoni6003 end then cross session then end, right?
ขอบคุณมากๆครับคลิปนี้มีประโยชน์มากๆ
i cant fillet edge my ring ;-;
I have some videos explain why fillet is not working in Q/A playlist.
I’ll watch it , thank you,
Also I followed your fox ring guide and made the ring but when I Boolean union it , it Boolean difference it instead... I tried restarting the program but still doesn’t union do you know why?