Listen to you askin us what we're still doin there when the jobs finished, while yer grinning yer head off!! 🤣👍🏻 Hey, nice job fella, I'm impressed.👏🏻👍🏻💯🐻❄️🐾🇬🇧
Lots worked from home back in the old days. The original tv repairman lived right across the street from my house. House and fish pond still there but he has been dead at least 40 years. His daughter sold the house and it was sold again about 3 years ago.
KP - agreed, very frustrating they have no trade counter - especially if you have an urgent repair. I’m pretty local too and can’t believe how long mail from them takes to arrive Nice job there - glad they guy wanted it fixed rather than junking it
Used to be able to go pick up at his part counter around at the back basement door. Someone couldn't follow directions not to park directly in front of his house and a neighbour complained and spoiled it for everyone.
Some interesting stuff.... I own a Denon AVR-1912 and I was cleaning it today. The amp board has the same silly solder notches fpr the transistors and even the value of the resistors are the same. The PCB has no branding on it. Just FL SL C FR SR and as it is a 7.1 amp SUR and SUL. The construction also is very similar to this Pioneer.
Mr. Volts, yes you are so right, us amateur wanna be Techs. we always Nag, gripe and whine when we can't find fault of your excellent tutorials. We tend to be critically picky, l do too, never mind "We" can't service any better, we then look to critique your systematic approach to the Job at hand. Don't worry l kick myself in the butt when l myself lean towards this unobjective dumb critisim. 😅 MJ. in B'dos.
Used to be able to. Call on phone for parts and he always said don't park directly in front of house. I always parked up the street. Unfortunately some people don't know how to visit a business operating out of a house in a residential area on the down low and the new mayor is kind of a dick. He didn't want Uber and Lyft in the city even though this was a provincial government decision. So he started using bylaw officers to order up an Uber or Lyft and then proceed to slap fines on drivers that showed up. My guess is the business got slapped with a bylaw fine as the current city government is sleazy in this respect. All i know is when i called to get some blue gears for Sony VCR the guy said i could no longer pick up parts. So either someone complained or the bylaw Nazi set him up. I have had them by here and read me the riot act. I had people dropping off old gear they were giving me and someone made a complaint. I suspect it is the guy across the street. He is the new one on the block. Everyone else knows me and I have fixed their stuff so they are not about to rat me out.
@@12voltvids wow !!, Dave, that's not good!, sounds like the Trudeau regime is pushing to make everything a crime!!, hopefully your 'new' neighbor won't be a jerk and try to get you out of the neighborhood!! You really help the other neighbors and I'm sure that you charge a fair price for the work you do, and are probably the only person around for miles that can repair the electronics that come to you for repair!, hold your ground and don't let the government take anything from you or your family!, thanks for your videos, I really appreciate them, and have gleaned a lot of tips from them as well! God bless 🙏
@@b.powell3480 where did Trudeau get into this? I am referring to a city council in Surrey. The local market there. A senile old man. You know who is taking my hard earned money. The IRS that's who. TH-cam gets clipped 33% before I even see it. Paypal now informs me that i have to pay tax on funds coming in. For repairs that means a 30% increase on service and the return shipping costs. The us is clamping down. I guess i could just go back to the old system. Send cash. I like the sound of that.😉
I am looking to buy a pioneer receiver and a used version of this model (circa 2012) is for sale and im curious your honest opinion is on the quality of this unit. Regardless of how i use it, is it a quality well made item? Thanks for your time!
I have the exact same receiver and wondering would you recommend shipping it to you so you can dianose and repair mine ....may be darlington outputs ....I have no sound and it clicks on, good display..nothing more i always try headphone outputs first and nothing.seeking repairs or placements
I don't put up copy written programming. Since later this are all copyright I'm not going to risk my channel by posting them some of the demonstration discs I could get away with the video but the music that's on there would certainly pull copyright matches for sure
I have a VSX-323. When I power it on sound comes on in all channels. within 5 seconds there is noise and the sound fades out in all channels. What could be the problem
Im sorry if my question sound noob.. Ive recently repaired a faulty peavey CS 1000 power amp that i got for cheap. It had a blown Channel B board.... shorted T03 transistors, I replaced the T03's, aswell as the driver transistors, emitter resistors, opamps etc... I powered up on dim bulb, bulb dimmed down as it should... amp powered up fine, Relays clicked as they should, and i even had good audio sound, and through both channels.. basically, it powered up and ran exactly as it should, even checked DC output on speaker terminals.. 1.8 Mv exactly on both channels..... Question is.... Does this mean that its 10000% safe to power up without the dim bulb in place?!? Im new to electronics, and this is my very first every repair project, and honestly, ive learnt alot about how it all works :) Im just still very cautious.. I dont want to power it up normally and blow up something that ive put so much hard work into fixing... Im gathering, the relays clicking on... is a sign that everything is happy? Many Thanks
Good point. I would say it's preferable to remove the old stuff, it tends to harden and not bind nicely, plus excess thermal grease is bad for dissipation as are silicon pads.
Today its very difficult to rally know the part is original or not before installing it. One has to trust the supplier your´e purchasing from and hope for the best.
Reputable places deal with original parts as they want to stay in business. Many years ago probably 25 now my supplier got a bunch of counterfeit parts in that looked original. I couldn't figure out why these horizontal outputs kept blowing over and over. I then thought bad flyback and it blew again. So then the through was a bad CRT and the customer dumped their nice Panasonic prism tv. I took the set home and popped in a used original transistor from a TV that the CRT was smashed. It worked. Never failed. Another set came in and a counterfeit transistor went in and it too blew. So I decided to open the transistors up. Both the dead original and the dead replacement and what I found shocked me. The die and silicon chip was about 1/4 the size of the original. No wonder it overheated and popped. I took my findings to the parts shop along with a bag of blown parts and he wouldn't believe me. I showed him the original and offered to open up one of his new ones on the spot. He handed me one and I used a Dremel to cut in. Tiny chip in that one too. Told me he sold thousands and i was the only one with a problem. I laughed and said the other guys are probably pulling their hair out or just condemning the tv after it blows again. I never bought that part again from main electronics. I went back to using manufacture supplied parts at 40.00 a pop instead of 5.00 and marked it up accordingly. Since then it has gotten worse.
Well that's a success, get it back to the owner before it finds a reason to explode again :-D
12volt Bueller, you're my hero.
😁😄😀😃🤣😂😅😎😉
Listen to you askin us what we're still doin there when the jobs finished, while yer grinning yer head off!! 🤣👍🏻 Hey, nice job fella, I'm impressed.👏🏻👍🏻💯🐻❄️🐾🇬🇧
Love to see your amazing videos, thank you so much for sharing, 💗💗💗💗
I remember we had a TV men who worked from his home, Frankangertert was his name, always loved fixing stuff trouble & repair
Lots worked from home back in the old days. The original tv repairman lived right across the street from my house. House and fish pond still there but he has been dead at least 40 years. His daughter sold the house and it was sold again about 3 years ago.
So happy all went well for you and no more smoke! Hey go have a nice cigar after this and enjoy your day! You did a very fine job!
KP - agreed, very frustrating they have no trade counter - especially if you have an urgent repair. I’m pretty local too and can’t believe how long mail from them takes to arrive
Nice job there - glad they guy wanted it fixed rather than junking it
Used to be able to go pick up at his part counter around at the back basement door. Someone couldn't follow directions not to park directly in front of his house and a neighbour complained and spoiled it for everyone.
Some interesting stuff.... I own a Denon AVR-1912 and I was cleaning it today. The amp board has the same silly solder notches fpr the transistors and even the value of the resistors are the same. The PCB has no branding on it. Just FL SL C FR SR and as it is a 7.1 amp SUR and SUL. The construction also is very similar to this Pioneer.
20 Lbs. That's heavy! Nice job!!
I just had to watch it to the end, 😆.
You never know. Cat might make an appearance some time
Thank you for sharing 👍 awesome video.
I was watching the live premier of this but my internet went down just a few minutes into it. Grrr!
Sounds like you are on Shaw.
@@12voltvids Actually my provider is Consolidated Communications. I am in the northeastern U.S..
And where I live cell service is pretty much useless.
good its going again
Another great repair video (finally 😆)
I love the content but more cats always helps 😁👍
this was very helpful. thank you
Oh, a Pioneer receiver that did an impression of a Lucas electric part in a British car.
Isn't that typical of British cars. They break down
Lucas, Prince of Darkness.
@@joelcarson4602 And one of the talents of the prince is blowing magic smoke.
Mr. Volts, yes you are so right, us amateur wanna be Techs. we always Nag, gripe and whine when we can't find fault of your excellent tutorials. We tend to be critically picky, l do too, never mind "We" can't service any better, we then look to critique your systematic approach to the Job at hand. Don't worry l kick myself in the butt when l myself lean towards this unobjective dumb critisim. 😅 MJ. in B'dos.
That parts place has the stk350-230 packs that my Sony GA-8ES needed. I stripped it thinking I couldn't get any real replacements.
They have many parts. Been around for over 30 years. One of the last good places to find parts.
Redundant screws, the manufacturer would designate on the spec. sheet as: "Specified layout assemblage of hold down fixed points". Just saying...😂
Someone go to the parts shop, QUICK!! He needs a can of "magic smoke"!! hahaha!!
Great video, Dave !, by the way, would that parts dealer let you do do a will-call pick-up?, especially when you're only 20 minutes away!!
Used to be able to. Call on phone for parts and he always said don't park directly in front of house. I always parked up the street. Unfortunately some people don't know how to visit a business operating out of a house in a residential area on the down low and the new mayor is kind of a dick. He didn't want Uber and Lyft in the city even though this was a provincial government decision. So he started using bylaw officers to order up an Uber or Lyft and then proceed to slap fines on drivers that showed up. My guess is the business got slapped with a bylaw fine as the current city government is sleazy in this respect. All i know is when i called to get some blue gears for Sony VCR the guy said i could no longer pick up parts. So either someone complained or the bylaw Nazi set him up. I have had them by here and read me the riot act. I had people dropping off old gear they were giving me and someone made a complaint. I suspect it is the guy across the street. He is the new one on the block. Everyone else knows me and I have fixed their stuff so they are not about to rat me out.
@@12voltvids wow !!, Dave, that's not good!, sounds like the Trudeau regime is pushing to make everything a crime!!, hopefully your 'new' neighbor won't be a jerk and try to get you out of the neighborhood!! You really help the other neighbors and I'm sure that you charge a fair price for the work you do, and are probably the only person around for miles that can repair the electronics that come to you for repair!, hold your ground and don't let the government take anything from you or your family!, thanks for your videos, I really appreciate them, and have gleaned a lot of tips from them as well! God bless 🙏
@@b.powell3480 where did Trudeau get into this? I am referring to a city council in Surrey. The local market there. A senile old man. You know who is taking my hard earned money. The IRS that's who. TH-cam gets clipped 33% before I even see it. Paypal now informs me that i have to pay tax on funds coming in. For repairs that means a 30% increase on service and the return shipping costs. The us is clamping down. I guess i could just go back to the old system. Send cash. I like the sound of that.😉
I am looking to buy a pioneer receiver and a used version of this model (circa 2012) is for sale and im curious your honest opinion is on the quality of this unit. Regardless of how i use it, is it a quality well made item? Thanks for your time!
Come on Dave. You could easily threedee print those resistors...😜😜😜
Be my guest let's see how you make out with that.
@@12voltvids only answer is... easily. Just a little joke...
I have the exact same receiver and wondering would you recommend shipping it to you so you can dianose and repair mine ....may be darlington outputs ....I have no sound and it clicks on, good display..nothing more i always try headphone outputs first and nothing.seeking repairs or placements
Off topic, I was wondering if you had any of the laserdisc videos on your channel, and if so if you could add a link to them.
I don't put up copy written programming. Since later this are all copyright I'm not going to risk my channel by posting them some of the demonstration discs I could get away with the video but the music that's on there would certainly pull copyright matches for sure
I have a VSX-323. When I power it on sound comes on in all channels. within 5 seconds there is noise and the sound fades out in all channels. What could be the problem
Hi sir
I have a pioneer vsx 522
But usb port nto working
Please help me
Thank you
Hello I have a av receiver like this one with no audio if you don't mind where do you order parts from ?..?
Kpcomponents.co
Im sorry if my question sound noob.. Ive recently repaired a faulty peavey CS 1000 power amp that i got for cheap. It had a blown Channel B board.... shorted T03 transistors, I replaced the T03's, aswell as the driver transistors, emitter resistors, opamps etc...
I powered up on dim bulb, bulb dimmed down as it should... amp powered up fine, Relays clicked as they should, and i even had good audio sound, and through both channels.. basically, it powered up and ran exactly as it should, even checked DC output on speaker terminals.. 1.8 Mv exactly on both channels..... Question is.... Does this mean that its 10000% safe to power up without the dim bulb in place?!?
Im new to electronics, and this is my very first every repair project, and honestly, ive learnt alot about how it all works :) Im just still very cautious.. I dont want to power it up normally and blow up something that ive put so much hard work into fixing...
Im gathering, the relays clicking on... is a sign that everything is happy?
Many Thanks
The speaker relay clicking on is a sign that everything is working as it should.
@@12voltvids Thats good then :) Both relays click without hesitation.. So i will power up without the dim bulb n place :)
Thankyou...
So for reassembly old heat sink compound need not be removed from original components or the heatsink?
Good point. I would say it's preferable to remove the old stuff, it tends to harden and not bind nicely, plus excess thermal grease is bad for dissipation as are silicon pads.
Wen I Zoom In On What You'r
Doing That Camera Sure Is Blury.
It's 1920x1080 full HD. That's 2mp in still photography world. They camera is HD not 4K. Well actually it is 4k but I am not shooting in 4k.
?how to tell if parts are "original"
Today its very difficult to rally know the part is original or not before installing it. One has to trust the supplier your´e purchasing from and hope for the best.
Reputable places deal with original parts as they want to stay in business. Many years ago probably 25 now my supplier got a bunch of counterfeit parts in that looked original. I couldn't figure out why these horizontal outputs kept blowing over and over. I then thought bad flyback and it blew again. So then the through was a bad CRT and the customer dumped their nice Panasonic prism tv. I took the set home and popped in a used original transistor from a TV that the CRT was smashed. It worked. Never failed. Another set came in and a counterfeit transistor went in and it too blew. So I decided to open the transistors up. Both the dead original and the dead replacement and what I found shocked me. The die and silicon chip was about 1/4 the size of the original. No wonder it overheated and popped. I took my findings to the parts shop along with a bag of blown parts and he wouldn't believe me. I showed him the original and offered to open up one of his new ones on the spot. He handed me one and I used a Dremel to cut in. Tiny chip in that one too. Told me he sold thousands and i was the only one with a problem. I laughed and said the other guys are probably pulling their hair out or just condemning the tv after it blows again. I never bought that part again from main electronics. I went back to using manufacture supplied parts at 40.00 a pop instead of 5.00 and marked it up accordingly. Since then it has gotten worse.
I agree! Very stupid design! Thanx Ken from gpt ms.