I have a 32SC, and tried to set it up according to this video; however, once I get past the first 16 channels in setting up control surfaces, I try to set up ext 2 and ext 3, but there is no such thing listed in my drop down menu. What am I doing wrong?
I do not understand something: at 4:25 you explain the fat ch. control but you push button that have some name written on while you say other control (for ex.: analog= trim, network=read, main=touch). This can be pretty confusing. And I see that this happens also with other button. How can resolve it?
Holy hell I nearly wet my pants when I heard this board was finnnnnaly getting LPX control support! Def purchasing now! Thank you guys so much for supporting the community!
At 2:23 I am not able to find inputs and outputs as shown in the video. It’s showing my komplete kontrol device. Please, can someone help me? Thank you.
@@FadeEcomonics yes.. mainly you need to get router connected to the mixer and the same router’s WiFi to the Mac. Also like they mentioned you need to finish the procedure till there.
@@7pw7 it’s working for me.. main issue was with the router I was using. You need to be connected to the same network. And the same router to the studio live.
For some reason when I set this up for Reaper I still only get 8 faders. I can see all 16 because of the extension but 9-16 is a duplicate of the 1-8. Any suggestions?
No kidding... I can’t believe they actually expect people to remember all of those button assignments that have nothing to do with the labels on the mixer. It’s laughable.
It won’t allow me to change the Mackle control input/output ports in control surface setup. Do you know why this is? I’ve followed all steps sequentially up until this point I have the studio live 24. Please Help much appreciated!
Thanks for the video! I’m very interested in this console, but the LPX DAW control is a bit convoluted for my liking. Are there layover screes available instead of memorizing a million function buttons? Thanks again for the video!
Hi, I’ve seen this video and already connected the studio live 32 to my Mac, I’m trying to use my plug-ins but the problem is that there is no audio send to my monitors, I’ve already checked my inputs and outs everywhere but I can’t, what should I do?
Once this has been done for Logic Pro, does that mean the mixer is no longer configured to work natively with Studio One DAW? Can it work with both or does it need to be one or the other?
Can the StudioLive mixer be used as a control surface for Cakewalk? If yes...Is there a video on setting up the StudioLive Series III 32S model to control the Cakewalk DAW. Thanks. Many people would benefit from this video. Phil NYC Area
Thank you, Rob Tera, for your comment. Knowing the issues concerning the StudioLive mixing Board Midi connection problems I am having or still have, I am continuously having this issue However, if you or anyone has any solutions to this problem, please feel free to reach out and share your experiences on how I can eliminate the problem. As always, I thank everyone for replying to my question about the StudioLive 32s Series Digital Mixing Board. Again Thank You
Hey am I missing a step or something. I do everything stated in video but I do not get the options to choose studio live main or extender in logic. Some one please help.
I can't get mine t show up either, did you ever get it to work? I just purchased this and I actually couldn't get any of my controllers to show up, but it works fine in studio one
@@FadeEcomonics yes I did I had to make sure that the board has the latest firmware and that everything is on the same network. Once that’s done go to ucnet and make sure you are connected to logic/mackiecontrol. The trick is logic must already be open in a session. Once connected then you can go to logic and set up the midi controls.
Hi Richard, thank you. I watched the video many times. Some of your choices in your drop down menu are not available to me. I need more help than this video is offering.
This video was excellent help. I have set up my Presonus StudioLive 32s Mixing Board to My Logic Pro x DAW. thank you for your expertise and knowledge on this subject. Your video is the only video I have found to explain this in full step-by-step detail.
drew peterson remove universal control and install it again from the website. Later update the universal control. You will find it in your preferences later. Faced the same. But now stuck at 2:23. I can’t find inputs and outputs as it’s shown in the video. Any idea?
@@AkarshVerma94 Hi, did you found the solution for this i have used the board for about half a year now and after an update it just stoped...I restarted everything and got stuck at 2:23 just as you and still can't find the UCNET output and input. I see a lot of people with this problem and they are too ignorant to help I guess.....
Can you do a video for setting this up with Cubase, Sonar and Mixbus? I got it partially working in mixbus and it works fine in Ableton and Studio One.
Presonus has kicked aside so many of us that use Cubase , i`m a firm believer they just want us to use studio one and thats it , well ill sell this $3,000 paper weight before i use studio one !!!!
Can I record onto the board standalone and then put it into logic and mess around with the tracks and then mix back on the board using the boards effects? Plz helppp!!!!!!
I followed all the steps exactly as Richard did here in this video but when I open the universal control app and go to the settings/preferences/Network MIDI. nothing shows up in the window. Im at a loss. The firmware of the Studiolice 32 is up to date and I have the midi usb and ethernet plugged directly into my Mac pro. please help. I don't want to have to start using studio one.lol
It looks like many of use are having problems getting the Studio Live 32 consoles to work with Logic Pro X and X 5 whats the deal here and to have NO phone support anymore is not helping or screen sharing either Ive purchased 2 of your boards and gear this needs to get fixed right away it's been months Im talking at lest 5 months or more.
Presonus has really passed the buck on us Steinberg Cubase users with the 32 studio live board, before they made this board they listed it will work with all daws !! $3,000 later it does not ! Will these steps work to set it up for cubase ? Or is there any other way ?
Looking to purchase a SL 32 soon but wanted to know peoples feedback about the SL series and DAW mode in Logic. I understand that this device was created for Studio One but will it handle basic daw controls in Logic? What issues are people having.
However, I am now having some issues trying to record audio tracks from the board to the Logic Pro X DAW & trying to understand, how to operate the buttons on the mixing board. I have discovered the board functions differently when using the knobs on it. For example, the link button is no longer consider the "Link" button on the PreSonus Mixing console, instead, it operates as a Loop button when turning on the loop function of the Daw Tracks. The second issue I am having "I cannot seem to record my external audio "guitar instrument" from the StudioLive 32 mixer to Create a Logic Pro Track on its DAW. I am please asking if Mr. Richards or someone can help me to figure out what I am doing wrong. I thank you in advance. :-)
how to work plugins on mixer in logic.....we need a video on that bcuz there are still bugs in operating plugins in side the daw or can y'all plz let us know what command chain in order for plugins to work on the board instead of using a mouse
why is this not working anymore for cubase ? i had it working and did a firmware update now i cant use daw mode !!!! This board has been a nightmare since day 1
Just tell us you don't have full support for logic and the studiolive DAW mode is for Studio One, case closed. Because I don't see how an engineer can be memorizing all the unlabelled buttons for his workflows when he can easily buy a dedicated control surface to make him work faster and efficiently.
Hey PLEASE PLEASE HELP So I've done everything in this video and still I can't get my studiolive 32 to work with logic proX. The only play back I'm getting Is the click track. How do I set up individual play back track from logic to the studiolive??and control the faders??
I am also having a similar problem with logic and presonus 32. I need more help than tech support offers. They keep pointing me back to Richard and the set up video on youtube.
Ok, what if my Network Midi for the StudioLive connection still reads "StudioLive 32s Not Connected" to run Logic Pro x, after going through all the steps you provided for getting the Network Midi Connected in the Universal Control App? what troubleshooting steps can I take to ensure The Presonusonus StudioLive is connected properly and ready to be used as a mixing board and Midi Interface?
I had the same problem. Had both USB and ethernet cables connected. It found the connection address after a half an hour, and worked a little bit, but when I shut down, the Universal application showed as not connected again.
Hi I have purchased and used Studiolive 32s board for about a year and back then i followed your instructions from begining to the end and everything worked like a charm until now. I have updated the universal control and firmware and suddenly daw mode stopped working.I then went to the control surface setup and couldn't get an output or input to mackie controll. Please If someone has any info on this It would be a blessing. I work with logic pro 10.4.5 on mac os mojave....
Same here. set up and could not get EXT 2 or EXT 3 to show up as input / output set up. Still not solved, plus having some other issues with it. I want to love this product, but tech support is not being as helpful as I would have liked
Bit of a noob question but if I just want to record tracks to Logic tracks do you just need the USB connection? Just want to record the band as Logic tracks and mix and match later.
@@robtera6214 Thanks for the reply Rob. Since this post I found out that the desk has an SD card slot for recording sessions. Basically you insert a high speed SD card and format it to the desks standards. Record your session. When finished you will have a bunch of WAV files which you can join up in Logic to edit to your hearts content - so didn't need to USB cable solution in my case.
Question is there's a way you can setup DAW mode in reaper l saw a guy using Studio live series 32 with Reaper on TH-cam l have client's that like using Reaper but I don't know how to setup Daw mode in Reaper or with the studio live series 32 if you have a video or diagram to help that would be useful, l appreciate it
Hi i have a Presonus series 3 and i use it with logic........ it seems to be in mono and im pulling my hair out. if i use the pan on the master track of logic both speakers work when panned left and both off when panned right. really frustrating. anyone have any ideas what is wrong? cheers
@@DoctorMcFarlandStudios I hust had to change to a stereo input lol sorted. got a new issue Hi thanks for the assistance. i just re-added my studio live 32 and addd mackie controletc. it worsk but i seem to have 4 of each input, if i move a slider up on channel one there are another 3 across the mixer that go up with it. Is there something i eed to change to stop this? please let me know thanks
So refreshing to have a company that a.) supports DAW integration and b.) communicates. Behringer does NOT give you an owners manual AT ALL with their mixers, or a cust support phone number or OR DAW SUPPORT!!! I do want to see this setup for your studio live 64s. UPDATE: I found this... StudioLive™ Series III StudioLive Series III MCU Emulation for Logic DAW Control Addendum 7.0 MB PDF YOU GUYS ARE THE BEST. I'm so over Behringer.
Man this shit is not working for me I have the 64s and cannot connect DAW to logic It won't even let me select the Import,Export Ports as StudioLive in the Logoc Pro Control Surface Set up It won't let me change them at all
@@presonus Hi I have purchased and used Studiolive 32s board for about a year and back then i followed your instructions from begining to the end and everything worked like a charm until now. I have updated the universal control and firmware and suddenly daw mode stopped working.I then went to the control surface setup and couldn't get an output or input to mackie controll. Please If someone has any info on this It would be a blessing. I work with logic pro 10.4.5 on mac os mojave....
Thank you for sharing this editorial. So I know every mixing board setup may be set up differently, and my question is how can I set up an MPC X Standalone drum machine to my studio live mixing board? l have the Presonus Studiolive 32s iii series mixing board. so if anyone has any information about this, please reply back, I would greatly appreciate the help and the feedback I get from the Presonus community, and as always happy recording everyone. I wish you great success in your music ventures. It would also be nice to see a video tutorial on this subject. I just know it would get a lot of views because there are so many home studio producers going through the same kind of challenges and issues I am having lol. So again thanks for sharing this information and instructions. I look forward to ha reply back, and again thank you.
Why why why can you not do a video about integration to Ableton? I cannot find one on youtube, your website is quite vague about DAW support, and when I go to your channel and search for Ableton, no video pops (other than the TOOMS one from several years ago on different gear). The search does get me multiple videos about why Studio One is right for me... Really? All its doing is making it more likely I go with A&H Qu series. Help a brother out, here. I need some clean clear walk-through/proof that this mixer and maybe even a second xxR tied to the physical board will show up as a single ASIO device in Ableton without me having to do some bullshit.
EXCELLENT REVIEW AND SET UP!... but... at $19.99 a month with Presonous Studio One Pro+... All of this can be avoided bro... Just plug and really PLAY and go to work for less than 20 bucks. I'm just saying... 😅 ...
Please do, It works excellent. The only small issue you will most likely have is figuring out how to use the Presonus Board knobs and create audio tracks from the StudioLive board onto your Logic Pro X DAW. If you have already figured this out, please share your results. I would love to find out what you have discovered. I thank you in advance. :-)
I love and hate this console!!! It's doesn't seem to be compatible with my macbook pro m2 chip. It's works great and then doesn't. I guess I should have never upgraded once I got it up and running...smh
I have the Studio Live 32 III and it is the most frustrating POS I have ever owned. Nothing works via plug and play. Further, the PreSonous support is, quite frankly, inept. I pulled up this video in search of an alternative to StudioOne as a DAW for the mixer, and have discovered yet another list of annoying complexities. This video is a warning sign if you can listen for complexity as apposed to simplicity. Buy the mixer if you wish to spend your MoJo chasing down a plethora of moving target bugs.
with the latest firmware, the software control of my studiolive shows me only Mackie control emulation (Logic) and Hui control emulation (Pro Tools) while i can't see studio one. Can someone help me to solve the problem? Thank you
I hope you'll make a template for logic. That's a lot of things to remember.
It's a little bit crazy really isn't it - for a device of this price. I appreciate this video, but it's a not really a seamless integration
Why didn't we even get a glimpse of Logic to see what it was doing?
It won’t let me choose the input or output ports on the mackie controler or extender
I have a 32SC, and tried to set it up according to this video; however, once I get past the first 16 channels in setting up control surfaces, I try to set up ext 2 and ext 3, but there is no such thing listed in my drop down menu. What am I doing wrong?
I do not understand something: at 4:25 you explain the fat ch. control but you push button that have some name written on while you say other control (for ex.: analog= trim, network=read, main=touch). This can be pretty confusing. And I see that this happens also with other button. How can resolve it?
Holy hell I nearly wet my pants when I heard this board was finnnnnaly getting LPX control support! Def purchasing now! Thank you guys so much for supporting the community!
Excellent Richard. As of a few months ago I'm the proud owner of the SL24 III running LPX and it's fantastic - the capabilities are off the chart.
At 2:23 I am not able to find inputs and outputs as shown in the video. It’s showing my komplete kontrol device. Please, can someone help me?
Thank you.
By the way I have got studiolive 32 series iii
@@AkarshVerma94 did it work? I’m getting the same issue?
same here
@@FadeEcomonics yes.. mainly you need to get router connected to the mixer and the same router’s WiFi to the Mac. Also like they mentioned you need to finish the procedure till there.
@@7pw7 it’s working for me.. main issue was with the router I was using. You need to be connected to the same network. And the same router to the studio live.
For some reason when I set this up for Reaper I still only get 8 faders. I can see all 16 because of the extension but 9-16 is a duplicate of the 1-8. Any suggestions?
Same issue here in Logic! Did you find a fix to this?
I hope there is an overlay template for this mixer while using Logic. Thats a lot to remember.
No kidding... I can’t believe they actually expect people to remember all of those button assignments that have nothing to do with the labels on the mixer. It’s laughable.
Hi there.could you please provide a guide on how to control Cubase in daw mode 😢?
It won’t allow me to change the Mackle control input/output ports in control surface setup. Do you know why this is? I’ve followed all steps sequentially up until this point I have the studio live 24. Please Help much appreciated!
did you manage to fix??
Thanks for the video! I’m very interested in this console, but the LPX DAW control is a bit convoluted for my liking. Are there layover screes available instead of memorizing a million function buttons? Thanks again for the video!
Hi, I’ve seen this video and already connected the studio live 32 to my Mac, I’m trying to use my plug-ins but the problem is that there is no audio send to my monitors, I’ve already checked my inputs and outs everywhere but I can’t, what should I do?
Can you show how to connect it to FL STUDIO?
Please and thank you
Can you show how to connect to ableton live? I’m using studio live 32sc. Do you have a Daw mode for ableton live?
for some reason logic won't give me ext 2 or ext 3 after adding two Mackie extenders
Once this has been done for Logic Pro, does that mean the mixer is no longer configured to work natively with Studio One DAW? Can it work with both or does it need to be one or the other?
Can the StudioLive mixer be used as a control surface for Cakewalk?
If yes...Is there a video on setting up the StudioLive Series III 32S model to control the Cakewalk DAW. Thanks. Many people would benefit from this video.
Phil
NYC Area
Does it work with Cubase ?
Thank you, Rob Tera, for your comment. Knowing the issues concerning the StudioLive mixing Board Midi connection problems I am having or still have, I am continuously having this issue However, if you or anyone has any solutions to this problem, please feel free to reach out and share your experiences on how I can eliminate the problem. As always, I thank everyone for replying to my question about the StudioLive 32s Series Digital Mixing Board.
Again
Thank You
Hey am I missing a step or something. I do everything stated in video but I do not get the options to choose studio live main or extender in logic. Some one please help.
I can't get mine t show up either, did you ever get it to work? I just purchased this and I actually couldn't get any of my controllers to show up, but it works fine in studio one
@@ronready66 yes I did. What have you done already
Did u get it working?
@@FadeEcomonics yes I did I had to make sure that the board has the latest firmware and that everything is on the same network. Once that’s done go to ucnet and make sure you are connected to logic/mackiecontrol. The trick is logic must already be open in a session. Once connected then you can go to logic and set up the midi controls.
@@iangodfrey2005 Got it working after several tries.. thanks for responding bro👊🏽
Hi Richard, thank you. I watched the video many times. Some of your choices in your drop down menu are not available to me. I need more help than this video is offering.
So how do we arm a track to record? Mackie MCU has a dedicated rec button over every fader, any way to assign that to the StudioLive?
This video was excellent help. I have set up my Presonus StudioLive 32s Mixing Board to My Logic Pro x DAW. thank you for your expertise and knowledge on this subject.
Your video is the only video I have found to explain this in full step-by-step detail.
I do not see my studiolive mixer in the network midi tab inside of universal control, any idea why?
Same problem. Figure it out yet? Did you log onto your wi-fi network with your computer?
@@cavestar2008 I have the same problem as well. IF you figure out, can you plz help me out ?
I had the same problem but a power cycle of the Studiolive seemed to fix it and make it appear in the Network MIDI tab.
drew peterson remove universal control and install it again from the website. Later update the universal control. You will find it in your preferences later. Faced the same. But now stuck at 2:23. I can’t find inputs and outputs as it’s shown in the video. Any idea?
@@AkarshVerma94 Hi, did you found the solution for this i have used the board for about half a year now and after an update it just stoped...I restarted everything and got stuck at 2:23 just as you and still can't find the UCNET output and input. I see a lot of people with this problem and they are too ignorant to help I guess.....
Can you do a video for setting this up with Cubase, Sonar and Mixbus? I got it partially working in mixbus and it works fine in Ableton and Studio One.
Presonus has kicked aside so many of us that use Cubase , i`m a firm believer they just want us to use studio one and thats it , well ill sell this $3,000 paper weight before i use studio one !!!!
Can I record onto the board standalone and then put it into logic and mess around with the tracks and then mix back on the board using the boards effects? Plz helppp!!!!!!
How can send reverb effect from Presonus 16.4.2 direct to Logic Pro x?
Sounds great! Thank you for your info. I was wandering if it also works for ableton life? Do all the functions work there too?
Why is DAW mode limited to 32 faders?
so need help here, trying to do this for cubase , and there is no mackie extender in drop down box when i want to add a device
Is there a video on how to memorize what the buttons control in Loigic? How can anyone apart from a maths genius remember them all?
Logic Pro didn't show me extender 3 :(
I followed all the steps exactly as Richard did here in this video but when I open the universal control app and go to the settings/preferences/Network MIDI. nothing shows up in the window. Im at a loss. The firmware of the Studiolice 32 is up to date and I have the midi usb and ethernet plugged directly into my Mac pro. please help. I don't want to have to start using studio one.lol
Same here..Any updates on your situation? Please let me know
Are your cables connected?
Rum with cubase?
how do you do this with a studio live 32R using Universal Control
how do i get my sound to come out through the 32 rack
It looks like many of use are having problems getting the Studio Live 32 consoles to work with Logic Pro X and X 5 whats the deal here and to have NO phone support anymore is not helping or screen sharing either Ive purchased 2 of your boards and gear this needs to get fixed right away it's been months Im talking at lest 5 months or more.
I am having similar problems. Tech support keeps sending me back to Richard in the youtube set up video. I do not see the options he sees.
it´s anny button or combinatión keys to set REC READY in individual tracks?
Presonus has really passed the buck on us Steinberg Cubase users with the 32 studio live board, before they made this board they listed it will work with all daws !! $3,000 later it does not ! Will these steps work to set it up for cubase ? Or is there any other way ?
There is no ucnet option under output port
Looking to purchase a SL 32 soon but wanted to know peoples feedback about the SL series and DAW mode in Logic. I understand that this device was created for Studio One but will it handle basic daw controls in Logic? What issues are people having.
However, I am now having some issues trying to record audio tracks from the board to the Logic Pro X DAW & trying to understand, how to operate the buttons on the mixing board. I have discovered the board functions differently when using the knobs on it.
For example, the link button is no longer consider the "Link" button on the PreSonus Mixing console, instead, it operates as a Loop button when turning on the loop function of the Daw Tracks.
The second issue I am having "I cannot seem to record my external audio "guitar instrument" from the StudioLive 32 mixer to Create a Logic Pro Track on its DAW. I am please asking if Mr. Richards or someone can help me to figure out what I am doing wrong. I thank you in advance. :-)
how to work plugins on mixer in logic.....we need a video on that bcuz there are still bugs in operating plugins in side the daw or can y'all plz let us know what command chain in order for plugins to work on the board instead of using a mouse
Is there a daw mode for fl studio and adobe audition???
I have been using the public beta and love it. I can even switch between StudioOne and Logic. 👍
where can i get the public beta
Can we please get one of these tutorials for Cubase?
why is this not working anymore for cubase ? i had it working and did a firmware update now i cant use daw mode !!!! This board has been a nightmare since day 1
Will this work the same way for Reaper?
does this also do this on previous version??
Just tell us you don't have full support for logic and the studiolive DAW mode is for Studio One, case closed. Because I don't see how an engineer can be memorizing all the unlabelled buttons for his workflows when he can easily buy a dedicated control surface to make him work faster and efficiently.
Thank bro but how do I set up my mic
Hey PLEASE PLEASE HELP
So I've done everything in this video and still I can't get my studiolive 32 to work with logic proX. The only play back I'm getting
Is the click track. How do I set up individual play back track from logic to the studiolive??and control the faders??
I am also having a similar problem with logic and presonus 32. I need more help than tech support offers. They keep pointing me back to Richard and the set up video on youtube.
Ok, what if my Network Midi for the StudioLive connection still reads "StudioLive 32s Not Connected" to run Logic Pro x, after going through all the steps you provided for getting the Network Midi Connected in the Universal Control App?
what troubleshooting steps can I take to ensure The Presonusonus StudioLive is connected properly and ready to be used as a mixing board and Midi Interface?
I had the same problem. Had both USB and ethernet cables connected. It found the connection address after a half an hour, and worked a little bit, but when I shut down, the Universal application showed as not connected again.
Somebody should sell printed overlay cutouts with labels for those button functions. Actually they should come in the box.
Do you have a similar video for Ableton Live?
what about amazing Cubase ??
Is this software still the beta version ? And would these steps be close to if your using Cubase as your DAW ?
Hi I have purchased and used Studiolive 32s board for about a year and back then i followed your instructions from begining to the end and everything worked like a charm until now. I have updated the universal control and firmware and suddenly daw mode stopped working.I then went to the control surface setup and couldn't get an output or input to mackie controll. Please If someone has any info on this It would be a blessing. I work with logic pro 10.4.5 on mac os mojave....
Same here. set up and could not get EXT 2 or EXT 3 to show up as input / output set up. Still not solved, plus having some other issues with it. I want to love this product, but tech support is not being as helpful as I would have liked
Bit of a noob question but if I just want to record tracks to Logic tracks do you just need the USB connection? Just want to record the band as Logic tracks and mix and match later.
I think that is true. I believe the USB cable will do that. The ethernet cable is for studio live as a DAW controller
@@robtera6214 Thanks for the reply Rob. Since this post I found out that the desk has an SD card slot for recording sessions. Basically you insert a high speed SD card and format it to the desks standards. Record your session. When finished you will have a bunch of WAV files which you can join up in Logic to edit to your hearts content - so didn't need to USB cable solution in my case.
Labels?
Question is there's a way you can setup DAW mode in reaper l saw a guy using Studio live series 32 with Reaper on TH-cam l have client's that like using Reaper but I don't know how to setup Daw mode in Reaper or with the studio live series 32 if you have a video or diagram to help that would be useful, l appreciate it
I noticed that you guy's doesn't deal with Reaper....(strange)...it's a DAW as well but l figure it out on my own
Hi i have a Presonus series 3 and i use it with logic........ it seems to be in mono and im pulling my hair out. if i use the pan on the master track of logic both speakers work when panned left and both off when panned right. really frustrating. anyone have any ideas what is wrong? cheers
Make sure the outputs you are using in Universal Control are panned hard left and right. I doubt this has anything to do with Logic Pro X.
@@DoctorMcFarlandStudios I hust had to change to a stereo input lol sorted. got a new issue
Hi thanks for the assistance.
i just re-added my studio live 32 and addd mackie controletc. it worsk but i seem to have 4 of each input, if i move a slider up on channel one there are another 3 across the mixer that go up with it.
Is there something i eed to change to stop this? please let me know thanks
So refreshing to have a company that a.) supports DAW integration and b.) communicates.
Behringer does NOT give you an owners manual AT ALL with their mixers, or a cust support phone number or OR DAW SUPPORT!!! I do want to see this setup for your studio live 64s.
UPDATE: I found this... StudioLive™ Series III StudioLive Series III MCU Emulation for Logic DAW Control Addendum
7.0 MB PDF YOU GUYS ARE THE BEST. I'm so over Behringer.
Still Beta or public?
Any answer to my question ?
Man this shit is not working for me
I have the 64s and cannot connect DAW to logic
It won't even let me select the Import,Export Ports as StudioLive in the Logoc Pro Control Surface Set up
It won't let me change them at all
Richard hi, good video, my router is in a different room, what do i do!?
You can still route your Ethernet cable from your router to the console. You can safely make CAT5e/CAT6 runs for up to 300 ft.
Have you tried a wifi extension router?
@@presonus Hi I have purchased and used Studiolive 32s board for about a year and back then i followed your instructions from begining to the end and everything worked like a charm until now. I have updated the universal control and firmware and suddenly daw mode stopped working.I then went to the control surface setup and couldn't get an output or input to mackie controll. Please If someone has any info on this It would be a blessing. I work with logic pro 10.4.5 on mac os mojave....
So Mr. Richards Gaspard "Production Specialist or someone, Can you help me with these issues, I have listed below this comment?
Will this work with Cubase Pro 10?
i cant get nothing to work with Cubase , this board is a joke !!!!
someone so needs to come up with how to do all this with Cubase, there are so many of us cubase users out here !!!!!
Thank you for sharing this editorial. So I know every mixing board setup may be set up differently, and my question is how can I set up an MPC X Standalone drum machine to my studio live mixing board?
l have the Presonus Studiolive 32s iii series mixing board. so if anyone has any information about this, please reply back, I would greatly appreciate the help and the feedback I get from the Presonus community, and as always happy recording everyone. I wish you great success in your music ventures. It would also be nice to see a video tutorial on this subject. I just know it would get a lot of views because there are so many home studio producers going through the same kind of challenges and issues I am having lol. So again thanks for sharing this information and instructions. I look forward to ha reply back, and again thank you.
Why why why can you not do a video about integration to Ableton? I cannot find one on youtube, your website is quite vague about DAW support, and when I go to your channel and search for Ableton, no video pops (other than the TOOMS one from several years ago on different gear). The search does get me multiple videos about why Studio One is right for me... Really? All its doing is making it more likely I go with A&H Qu series. Help a brother out, here. I need some clean clear walk-through/proof that this mixer and maybe even a second xxR tied to the physical board will show up as a single ASIO device in Ableton without me having to do some bullshit.
DAW control, yet no 96k? What decade are we in again???
this did not work for me
AND THE CS18 STUDIOLIVE WE WAITING THANKS
They must have issues with cubase
Thanks Man Works On Point. Really Helped
EXCELLENT REVIEW AND SET UP!... but... at $19.99 a month with Presonous Studio One Pro+... All of this can be avoided bro... Just plug and really PLAY and go to work for less than 20 bucks. I'm just saying... 😅 ...
Amazing Video! I can't wait to try it out.
Please do, It works excellent. The only small issue you will most likely have is figuring out how to use the Presonus Board knobs and create audio tracks from the StudioLive board onto your Logic Pro X DAW. If you have already figured this out, please share your results. I would love to find out what you have discovered. I thank you in advance. :-)
Thank you!!! Very helpful
I love and hate this console!!! It's doesn't seem to be compatible with my macbook pro m2 chip. It's works great and then doesn't. I guess I should have never upgraded once I got it up and running...smh
I have the Studio Live 32 III and it is the most frustrating POS I have ever owned. Nothing works via plug and play. Further, the PreSonous support is, quite frankly, inept.
I pulled up this video in search of an alternative to StudioOne as a DAW for the mixer, and have discovered yet another list of annoying complexities. This video is a warning sign if you can listen for complexity as apposed to simplicity.
Buy the mixer if you wish to spend your MoJo chasing down a plethora of moving target bugs.
with the latest firmware, the software control of my studiolive shows me only Mackie control emulation (Logic) and Hui control emulation (Pro Tools) while i can't see studio one. Can someone help me to solve the problem? Thank you
go on fb on the studiolive group they can help you out
Many thanks i'll do it
frankarro did you get the solution? I am also facing the same issue.
doesn't work at all..
I don’t like how he’s talking to us like we’re slow or stupid.
Is it available for cubase?