Great video. Unpacked, got organized and cut all the parts open. With your help by my self, and starting and stopping the video, it took me 50 minutes. I did have to soap up the threads a bit on one of the peddles. Thanks for taking the time to make the video, you made my job a lot quicker and easier.
Many thanks! My Yosuda was delivered and I’ll be assembling it this weekend. Your video was excellent and will greatly accelerate the assembly process. I also had watched your other excellent videos on this bike, and they were most helpful, as well.
THANK YOU SO MUCH for this video!! I put this bike together today using your video as my guide, and it was the perfect companion, much better than trying to read the instruction manual. Your voice is also great to listen to, calm and measured, very graceful - setting just the right tone for the listener to follow along and not get stressed out. Thanks again!
This video was super helpful!! Your instructions were clear and easy to follow. I put it together in less than an hour. I'm ready to rehab my knee. Thank you so much!
Many thanks! If I'd relied on the instructions that came with the bike, I'm not sure if I would have ever gotten it assembled. You were a great help. Thanks again!
Thank you so much for this video. It was very helpful. I didn't even bother with the instructions. I put it together by myself and it took me 90 minutes from unboxing and unpacking to the end. I had to modify the seat some as I felt like I was sliding off towards the front. Thanks again.
Many thanks for putting together this wonderful video and for demonstrating how to assemble the bike. The video made it so easy for me! If only everything in life came with a video like this one.😊
Thank you for this video. Was very helpful. We assembled ours today and honestly I thought was gonna take hours but it was just quick because you were so precise with your instructions. Much appreciated
Thank you so much. I didn’t even bother looking at the instructions and went to TH-cam this video. And I’m currently writing ✍️ this on my bike 🚴🏾 so thanks !
Thanks Jeff. Great video instruction! Very elaborate, nicely paced and helpful. Just a few comments. 1. When installing the handlebar, the last step asks to screw in Plum Blossom Screw (#63) to add to the stability of the handlebar. The booklet was not clear about the hole on the side. I think the video missed that little step. 2. The seat may needed to be tilted down by hand after inserting it into the seat post as my sit came in tiled upwards. 3. It seems the manufacturer provided an extra part of all screws, nuts and washers which is great. But it would be nice to mention as I was thinking if I missed putting in that 5th screws somewhere, just like what you did for the extra break pad. 4. Lastly, how easy it is to replace the break pad. May be you can add a video on that. There is no instruction in the manual on that topic.
Thank you so much for this excellent video. I am not sure who are those that gave thumbs down but to me this video is excellent and a time saver. The paper instruction is awful and this video helped me.
Your video was good and helpful. I put the bike together with the official video but had an extra part and couldn’t figure out where it went. The official site video didn’t show it. It was the extra brake pad. Your video helped me figure out the brake pad :) thanks much
Great job on video instructions. I unboxed in garage (your way). All parts hand carried to 2nd floor room. Main frame about 49 lbs. I am 67 senior/171 lb/good shape. Maybe 30 minute assembly. I used a 1/2 in. box end wrench on the nuts. My wife likes it...great product at our price level.
Nice instructions! I installed the bolts on the stabilizers the opposite way (from the bottom) and it was much easier to tighten them because it avoids the narrow spacing on the top. I didn't know what the extra piece was so thank you for mentioning that
Thank you so, so much! I think I bought a very similar, if not the same, bike. After an intense workout of construction, I managed to build the whole bike...apart from the seat, which just sat on its post and spinned. I just could not figure it out and was driving me mad. Due to your video I tightened the bolts under the seat: Et voila! Thank you very much and Happy 2021. See you when I'm five stone lighter...!
This was great! Do you know you would go about installing the additional brake pad ( that came included with the bike) for the resistance , if needed down the line. This video was very helpful and thorough!
I was given one of these bikes second hand. The seat is stuck in the lowest position. Do you have any ideas on how to get it to budge? Is there some other way I could approach the seat post besides the usual way?
That you for the awesome video (I watched the next one as well). After I put the seat on and tightened the bolts, one side of the seat is slightly higher than the other. Will my body weight even it out and is that something I should just ignore if it is comfortable? Thanks!
I’ve been using it and it doesn’t seem to be a problem..afraid to unscrew it because I tightened it so hard originally that I’m afraid I would strip it now..
Did everyone else have for the base 1. an extra screw 2. dome bolt, 3. washer For the handlebar: 1. An extra screw 2. Washer I have now watched this multiple times and read instructions twice but I don’t see that needing to go anywhere else. TIA
Thank you so much for this video. Mine arrived today and I just assembled it. After watching your video, it appears that I'm missing the screw to tighten the meter support.
This video was excellent. I'm a 73 year old lady with NO mechanical ability. Followed step by step instructions and the bike went together flawlessly.
Great!
Very good instruction. Thank you....
Well Done.
Thank you for your easy-to-follow instructions. I assembled my Yosuda in less than an hour. My grandchildren will be impressed!
Wonderful!
I wish I could maintain my calm while assembling anything. Kudos to you going a step further and record it all by yourself. Great job.
Haha I understand completely.
Best video ever. Step by step, so easy. Did it by myself in less than 45 mins. YOU ROCK!
Thanks!
Great video. Unpacked, got organized and cut all the parts open. With your help by my self, and starting and stopping the video, it took me 50 minutes. I did have to soap up the threads a bit on one of the peddles. Thanks for taking the time to make the video, you made my job a lot quicker and easier.
Glad it helped!
Has anyone had clicking when pedaling? It's not consistent but can't tell what makes it come and go.
Thank goodness for this because those directions were kind of ehhhh lol
Haha yeah
This was SO helpful! Thank you for making the process so easy. You saved me lots of time.
Glad it helped :)
Many thanks! My Yosuda was delivered and I’ll be assembling it this weekend. Your video was excellent and will greatly accelerate the assembly process. I also had watched your other excellent videos on this bike, and they were most helpful, as well.
Great!
THANK YOU SO MUCH for this video!! I put this bike together today using your video as my guide, and it was the perfect companion, much better than trying to read the instruction manual. Your voice is also great to listen to, calm and measured, very graceful - setting just the right tone for the listener to follow along and not get stressed out. Thanks again!
Cool! Thanks for the kind feedback!
This video was super helpful!! Your instructions were clear and easy to follow. I put it together in less than an hour. I'm ready to rehab my knee. Thank you so much!
Sure!
Thank you so much Jeff. You made it so easy to put this bike together. You're the best instructor.
Glad to help!
Thank you!! It’s 11/21 and you helped me put my bike together. I’m ready to Exercise.
Just got this Yosuda bike today from Amazon and your video was very helpful in assembling the bike. Thanks so much!
Great! Have fun!
Many thanks! If I'd relied on the instructions that came with the bike, I'm not sure if I would have ever gotten it assembled. You were a great help. Thanks again!
Great to hear!
Excellent video, very clear instructions. Got it done flawlessly in less than 45 minutes. Awesome job, thank you so much!
Getting mine tomorrow and this serves best as an assembly tutorial. Thanks man!
God bless you sir! The instructions weren’t clear enough. You made it super easy for me to put together for my dad. Thank you!
Great to hear!
Thank you so much for this video. It was very helpful. I didn't even bother with the instructions. I put it together by myself and it took me 90 minutes from unboxing and unpacking to the end. I had to modify the seat some as I felt like I was sliding off towards the front. Thanks again.
You're very welcome!
Many thanks for putting together this wonderful video and for demonstrating how to assemble the bike. The video made it so easy for me! If only everything in life came with a video like this one.😊
Thank goodness. That extra brake pad drove me nuts. Thought I missed somthing. lol
Yeah they should make that more clear. :)
Thank you for this video. Was very helpful. We assembled ours today and honestly I thought was gonna take hours but it was just quick because you were so precise with your instructions. Much appreciated
Fantastic!
Thank you so much. I didn’t even bother looking at the instructions and went to TH-cam this video. And I’m currently writing ✍️ this on my bike 🚴🏾 so thanks !
Sure!
This really helped me put this together on my own. I read the directions afterwards just so I'd know what to do if and when repairs are needed. THANKS
Glad to help. Sounds good!
My bike arrives tomorrow and this has me so excited! Thank you!
Hope you're enjoying it!
Thanks Jeff. Great video instruction! Very elaborate, nicely paced and helpful. Just a few comments. 1. When installing the handlebar, the last step asks to screw in Plum Blossom Screw (#63) to add to the stability of the handlebar. The booklet was not clear about the hole on the side. I think the video missed that little step. 2. The seat may needed to be tilted down by hand after inserting it into the seat post as my sit came in tiled upwards. 3. It seems the manufacturer provided an extra part of all screws, nuts and washers which is great. But it would be nice to mention as I was thinking if I missed putting in that 5th screws somewhere, just like what you did for the extra break pad. 4. Lastly, how easy it is to replace the break pad. May be you can add a video on that. There is no instruction in the manual on that topic.
Thank you! I was looking for where the plum blossom screw went
Thank you for mentioning the extra bolts. I too thought I missed something.
Great instructions! My cycle was delivered yesterday and assembly was a snap.
Super cool.
Thank you so much for this excellent video. I am not sure who are those that gave thumbs down but to me this video is excellent and a time saver. The paper instruction is awful and this video helped me.
So nice of you
Your video was good and helpful. I put the bike together with the official video but had an extra part and couldn’t figure out where it went. The official site video didn’t show it. It was the extra brake pad. Your video helped me figure out the brake pad :) thanks much
Happy to help!
Thank you so much! Your video was perfect--followed you every step of the way. Now I can get in shape! Really appreciate your help! :)
Wonderful!
I just put my bike together watching this video. You rock.
Excellent
Excellent job with the video. You made it very easy to put together. Thanks!!
Thanks for these very helpful instructions. Much easier to follow than the written setup instructions that came with the bike.
Great job on video instructions. I unboxed in garage (your way). All parts hand carried to 2nd floor room. Main frame about 49 lbs. I am 67 senior/171 lb/good shape. Maybe 30 minute assembly. I used a 1/2 in. box end wrench on the nuts. My wife likes it...great product at our price level.
Nice work!
Dude. You're the man for this video.
Happy to help :)
Nice instructions! I installed the bolts on the stabilizers the opposite way (from the bottom) and it was much easier to tighten them because it avoids the narrow spacing on the top. I didn't know what the extra piece was so thank you for mentioning that
Right on.
Checked out your video before opening the box. Nice and clear explanation. Thank you.
Awesome, thank you!
Got mine today. Followed you every step. Thank you 💖
No problem!
big thanks as we followed you and put our bike together keep up good work
No problem 👍
Great video. Getting ours tomorrow. Thanks to your video it should be easy to set up!
Hope it helped!
@@Topfitnessmagazine YES!
Good work on the Assembly, I just assembled mines watching your video 😎.
Cool, thanks!
Great job with the assembly help! Thank you!!
Glad it helped!
Thank you so, so much! I think I bought a very similar, if not the same, bike.
After an intense workout of construction, I managed to build the whole bike...apart from the seat, which just sat on its post and spinned. I just could not figure it out and was driving me mad.
Due to your video I tightened the bolts under the seat: Et voila! Thank you very much and Happy 2021.
See you when I'm five stone lighter...!
Happy to hear!
Bro thank you so much. I wouldn't do it with out this video. The instructions were a little hard for me.
You're very welcome!
BRAVO 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻. Thank you much.
Learned about that extra brake pad.
Thank you ! Was very easy thanks to your video
Great to hear!
Thank you for this. Made the job so much easier.
You're welcome!
Thanks so much for this video! What would have taken 2 hours took me 30 min
Right on!
Great presentation, very clear and precise! Looks pretty simple, thanks for taking the time to post this vid, much appreciated! 👍👍. Subscribed.
Glad it was helpful!
How does one install their own bike seat to this? Do you need to disassemble the seat that came with it?
Thanks for your time. Excellent job!!
Glad you liked it!
Great instructions! Thank you so much. That was easy to understand.
thank you... i wish you included how you change the pad
Maybe in the future :)
i would like more info onhow to read the digital monitor
Thank you so much. I didn't get any instructions with my bike.
Thanks so much! My eyeballs were crossing trying to read those tiny directions. LOL
:) No worries!
Very helpful video, excellent recording, no doubt you will be able to assemble your bike with this video. Thank you,
Thanks!
You sir, are a lifesaver. Thank you
Appreciate this video; super helpful. Thanks!
Thanks for the feedback!
God bless you Sir, thanks for the effort and your time 🙏
My pleasure
Thank you for your help!
No worries!
This was beyond amazing. Thank you so much!!
You're so welcome!
This was great! Do you know you would go about installing the additional brake pad ( that came included with the bike) for the resistance , if needed down the line. This video was very helpful and thorough!
Happy to help!
I panicked a bit seeing you using long bolts at the beginning but my bike is made different. Great video
I got the pedals on the bike just fine but I can’t get the cranks to move . Help ?
I was given one of these bikes second hand. The seat is stuck in the lowest position. Do you have any ideas on how to get it to budge? Is there some other way I could approach the seat post besides the usual way?
Do you know if you can switch out the pedals to get the clip in ones?
I believe you can.
Thanks for sharing this video it’s really helpful for me to assemble the cycle🚴🏼♂️👍👌
No problem man 👍
I can't get the left pedal on. The nut or bolt won't let me put it through.
Hi, thank you for this video. Once your time to change the breakpad comes please make a video tutorial for it.
Noted :)
Thank you, This made assembling my bike easy
Glad it helped!
Hi! Thank you for this video! It helped me a lot! from Japan
Great!😀
Thanks so much for this!
Thank u. Found this video extremely helpful
Right on
Thanks so much this video was very easy to follow!
Glad it was helpful!
Awesome! Thanks for this!
You bet!
Great video! It was very helpful. Thank you so much!
Sure!
Thank you very much. These were perfect instructions.
Happy to help
Sooo HELPFUL!!!!
Great!
Thank you! Good tutorial!
Glad it was helpful!
Wow ur amazing!!! I put the bike together with no problem 😃 thanks so much!!!! 😃
Glad to hear!
I really appreciate this video, Thank you.
You're very welcome!
Thanks so much for this great video, the manual was awful. Ready to ride!!
Great to hear
Hi there have you ever had issues with the belt coming apart ?
Not yet..
That you for the awesome video (I watched the next one as well). After I put the seat on and tightened the bolts, one side of the seat is slightly higher than the other. Will my body weight even it out and is that something I should just ignore if it is comfortable? Thanks!
I had the same issue! I had to unscrew it and make sure the seat was placed all the way into the post
I’ve been using it and it doesn’t seem to be a problem..afraid to unscrew it because I tightened it so hard originally that I’m afraid I would strip it now..
Good to know I wasn’t the only one!
This was simply awesome and very helpful.
Glad it was helpful
Did everyone else have for the base
1. an extra screw
2. dome bolt,
3. washer
For the handlebar:
1. An extra screw
2. Washer
I have now watched this multiple times and read instructions twice but I don’t see that needing to go anywhere else. TIA
Yes, I have these leftover too
Yes, I did too, is that normal? Or did I forget to put one somewhere ?
I think they, like the extra brake pad, are in case you need them? I was also confused
I put this together by myself thanks to you.. only issue is the seat kinda points down and yours is flat
Hope you were able to figure it out.
That was great. Thank you so much!
Glad you enjoyed it!
Thanks for the video -- very helpful!
This video was very helpful. I seemed to misplaced my paper instructions 😅.
Glad to help!
That was a great video. Thanks
You got it!
Thank you so much for this video. Mine arrived today and I just assembled it. After watching your video, it appears that I'm missing the screw to tighten the meter support.
Thank you! Thank you! Thank you!
Amazing video! We put it together in less than 30 minutes.
Nice work!
Awesome man! Your guidance made the difference! THABK YOU SO MUCH!
Were there any extra pieces left after you finished assembly? I have a couple of bolts/screws left
I did too - an extra long screw and short screw, a washer, a dome nut and a small blossom knob!
Ditto. You saved me from having to look at the poorly drafted paper manual. Thanks for the video. Very helpful. Bike seems solid.
After the complete assembly I am left with one nut of each type..and one knob too. Are they supposed to be extra?
Me too!
Thank you so much my box did not come with instructions
No worries!
Thank you so much! Made everything so much easier.
Very glad to hear.