Glad you like it. Hope your new ride treats you well. If you would like some detailed writeups on working with PVC, rod holders, motor mounts, etc. send me an email to tdude@centuirylink.net
That is a big part of the appeal for me too. You might sacrifice speed and range when float tubing, compared to a boat, but if you pick the right area and fish it right you will often catch more fish.
Thanks. I have trouble believing it myself. But, as Kermit the Frog says "See how fun times when you're having flies." Not sure if you watched my earlier video on "60 Years In A FloatTube" . Here's a link th-cam.com/video/Zf8_RV_8CjQ/w-d-xo.html
Not sure how I stumbled upon this one - but since it showed up on the front page of TH-cam while I was looking for something totally unrelated(a little known classical music piece) figured I would check out yer latest vid. BTW - its me Fishhound.
Hey Chuck, good to have you drop in. Hope all is well in your world. I have several videos on TH-cam now. One is on "G0 Years In A Float Tube. Here's a link th-cam.com/video/Zf8_RV_8CjQ/w-d-xo.html
Very impressive! Question for ya...you said the Fat Cat didn't blow around as much as a brand that looks like my Cumberland. Well my Cumberland is difficult in the wind, but the reason I went with it was because I heard it was safer, if you leaned forward. What are your thoughts on pointed vs blunt ends?
It's all about profile above the water...when it comes to handling in the wind. Most float tubes can be difficult in high winds. But the pointed back end helps steer easier with either fin power or motor. As far as the pointed vs blunt front end, I think the length of the rube in front of the operator is more important than the shape. I never had a problem with leaning forward in my Fat Cat...and I am over 250#. But I did have problems with the shorter front Fish Cat models I tried.
Thanks for the kindly comments. I am properly grateful the the many years of good experience I have had....and enjoy passing along any help I can offer to others still in the learning curve. As I like to say, I may not know all the answers but by now I at least know most of the questions.
I am using a MinnKota 40# thrust EnduraMax motor. A 30# thrust would provide enough power, but I need the longer shaft on the 40#. I recently upgraded my battery to a 100 amphour Lithum battery. You can use a regular deep cycle marina battery or an AGM battery. But I really like the difference in longevity and output with the lithium. Pretty spendy though. Lots of good ones now on the market...with long time guarantees.
Unless you get hit with a big boat wake you should never have to worry about that. But I always make sure my wire connections are well wrapped with plastic tape and clamped very securely in the connectors. I have had a few connections come loose and lose power while fishing. But have never had a problem with splashing water.
Just be sure your motor is rated for salt water use...and rinse everything down with fresh water after each trip. Also, even more important to make sure all of your electrical connections are solid and covered to reduce salt water corrosion.
For the main construction frame, etc. I use schedule 40 1". It is the heavier thick wall tube. For the rod holder tubes I use thin wall type 200 1" PVC. The thin wall will hold most rod handles but if you use the heavier schedule 40 you will need 1 1/4" for the rod holders. Too heavy. Standard 1" fittings will work on both schedule 40 and type 200. Same outside diameter but greater inside diameter on the type 200.
For any framing that requires a lot of strength, I stick with the heavier schedule 40...1". However, if you need to run a piece through the holes in the floats you will need some 3/8". If you send me an email to tdude@centurylink.net I can send you a PDF file with specs for making that mount. \But you will have to make some adjustments in size to fit the tube you are working on.
Just got my first float tube and this video was great. Your set up is killer!
Glad you like it. Hope your new ride treats you well. If you would like some detailed writeups on working with PVC, rod holders, motor mounts, etc. send me an email to tdude@centuirylink.net
Very nice setup you have there. I love fishing in a tube! It's so quiet compared to a boat!
That is a big part of the appeal for me too. You might sacrifice speed and range when float tubing, compared to a boat, but if you pick the right area and fish it right you will often catch more fish.
Always enjoy your vids. Thanks for sharing.
Thanks. I enjoy making them.
Cool video, I cant belive you've been doing that for 60 years.
Thanks. I have trouble believing it myself. But, as Kermit the Frog says "See how fun times when you're having flies." Not sure if you watched my earlier video on "60 Years In A FloatTube" . Here's a link th-cam.com/video/Zf8_RV_8CjQ/w-d-xo.html
Cool stuff! 😀
Thanks! 😀
Not sure how I stumbled upon this one - but since it showed up on the front page of TH-cam while I was looking for something totally unrelated(a little known classical music piece) figured I would check out yer latest vid. BTW - its me Fishhound.
Hey Chuck, good to have you drop in. Hope all is well in your world. I have several videos on TH-cam now. One is on "G0 Years In A Float Tube. Here's a link th-cam.com/video/Zf8_RV_8CjQ/w-d-xo.html
Very impressive! Question for ya...you said the Fat Cat didn't blow around as much as a brand that looks like my Cumberland. Well my Cumberland is difficult in the wind, but the reason I went with it was because I heard it was safer, if you leaned forward. What are your thoughts on pointed vs blunt ends?
It's all about profile above the water...when it comes to handling in the wind. Most float tubes can be difficult in high winds. But the pointed back end helps steer easier with either fin power or motor. As far as the pointed vs blunt front end, I think the length of the rube in front of the operator is more important than the shape. I never had a problem with leaning forward in my Fat Cat...and I am over 250#. But I did have problems with the shorter front Fish Cat models I tried.
@@tubedude467 Thanks much...finally someone who actually reads the question. You've been blessed with many talents!
Thanks for the kindly comments. I am properly grateful the the many years of good experience I have had....and enjoy passing along any help I can offer to others still in the learning curve. As I like to say, I may not know all the answers but by now I at least know most of the questions.
What brand model size trolling motor do you recommend? Also, what battery size model etc? THANKS DUDE TUBE ON!
I am using a MinnKota 40# thrust EnduraMax motor. A 30# thrust would provide enough power, but I need the longer shaft on the 40#. I recently upgraded my battery to a 100 amphour Lithum battery. You can use a regular deep cycle marina battery or an AGM battery. But I really like the difference in longevity and output with the lithium. Pretty spendy though. Lots of good ones now on the market...with long time guarantees.
If the wires and battery get wet is fine?
Unless you get hit with a big boat wake you should never have to worry about that. But I always make sure my wire connections are well wrapped with plastic tape and clamped very securely in the connectors. I have had a few connections come loose and lose power while fishing. But have never had a problem with splashing water.
@tubedude467 ok thank you cause I'm going to the same thing like you are but just take into the ocean
Just be sure your motor is rated for salt water use...and rinse everything down with fresh water after each trip. Also, even more important to make sure all of your electrical connections are solid and covered to reduce salt water corrosion.
@@tubedude467 thanks allot boss
What size pvc pipes are you using?
For the main construction frame, etc. I use schedule 40 1". It is the heavier thick wall tube. For the rod holder tubes I use thin wall type 200 1" PVC. The thin wall will hold most rod handles but if you use the heavier schedule 40 you will need 1 1/4" for the rod holders. Too heavy. Standard 1" fittings will work on both schedule 40 and type 200. Same outside diameter but greater inside diameter on the type 200.
Nice, thanks for a quick answer. Im going to try to build the "Mega mount" for my fishcat 4 lcs. What size are that pvc built of?
For any framing that requires a lot of strength, I stick with the heavier schedule 40...1". However, if you need to run a piece through the holes in the floats you will need some 3/8". If you send me an email to tdude@centurylink.net I can send you a PDF file with specs for making that mount. \But you will have to make some adjustments in size to fit the tube you are working on.
Thanks, i send you an e-mail! I really hope it will work on my tube