#126

Another short video running through setting of the tappets on our TVO Standard Engine. The manual says to set the Exhaust at 12 thou and the Inlet at 10 thou when the engine is cold.
Please visit our sponsors who make all this content possible
www.anglo-agrip...
You can also visit us on our web page: www.waterhousef...
Friend us on Facebook: @waterhouseforde.55
And follow us on Instagram: gp5rry
Music:
Feelin' Good - www.purple-plan...

[@charlesvanderwolf5751]

Hello Gordon, Ferguson really made things simple for the normal farmer with basic mechanical experience to work on their tractors.
This is very different today. Thanks for a great video. Regards from Charles @ Nerimbera Australia.

[@WaterhouseForde]

Hi Charles, yes they did. It’s partly why I enjoy working on this era of tractors. Thanks for your continued support. 😉👍

[@Masseyferguson65]

It must be a Nice Feeling for you now .. you get closer and closer now 👍👍😊in near future there will be smoke inside your workshop .. Thanks for your video . Michell Norway 🚜🚜🚜

[@WaterhouseForde]

Hi Michell, yes it certainly is getting exciting! It won’t be long now. Just a few small problems to sort out! 😉👍👍

[@JS-vs6vx]

Hi boys, I also saw your other video where you installed the brass plug in the cylinder head with loktight. I also had 2 small cracks around the white plug, quite similar to yours. Like yours it looked very minor but I had NDT test done on the head and it showed the cracks went right along the length of the cylinder head running parallel to the valves, but could only be seen on NDT - could not see it with naked eye or magnifying glass. Just thought I would let you know might be worth triple checking yours! Jon

[@WaterhouseForde]

Hi thanks Jon, we’re so far along now I think we’ll chance it. At least if we do have any issues we know where to start looking. 😉 Well done for checking yours first! 👍😉

[@JS-vs6vx]

@@WaterhouseForde yeh I would do the same, after a short initial run might be worth to quickly take the tank off, pop off the rocker cover and have a look to make sure, and check your sump.

[@selinapadilla4021]

Buena tarde oie tengo un ferguson to30 quiero anillado pero no se que tipo de anillos lleva podrías ayudarme con eso..

[@WaterhouseForde]

I’m not sure about the TO30, but with the England series, normally people will replace the sleeves so that they can fit std rings. An engineering shop will be able to measure yours accurately and advise on the best way forward. 😉👍