Genial! Habe mit Pix4D in 2014 "gearbeitet" als es gerade "Payware" wurde und dann mit Litchi als Tester, aber in der Simplizität wie hier macht das gleich wieder Laune und ist 'ne würdige Konkurrenz! Wünsche viel Erfolg und hoffentlich viele kommerzielle Anwendungsfälle! ;-)
Hello Killian, With version 2.9, I've noticed that after transferring to litchi, the first photo is taken, but not the subsequent ones. Compared to an older mission, I have noticed that the photo capture interval is no longer displayed in litchi. Thank you for your feedback Louis
Just purchased your app. Thanks for developing the app and putting this tutorial together. Very helpful! You have a great teaching style and are easy to follow and understand. You mentioned several times to change pitch angle with each orbit/altitude. Is there a standard formula you use to adjust the tilt?
So you can basically do something like this for a lot and then use inside 3dsmax for example to photo match a rendering of a building ? Very cool thanks.
Great app! Thanks. But is there a way to easily calculate the % of the overlap? Let say, i'm flying with my Mavic 3 at 50m altitude and I want 80% overlap. What would be the distance between waypoint lines etc.
Hi! First of all I would like to thank you for this application. It's great and the price is very affordable. I wanted to ask if it is possible to stop a Fly Mission during it? The second question is that when you have the Inspection mission, you can somehow change the lower level from which the flight should start, from what I see it always starts from the ground level and I can't find out if it can be changed somehow. Regards! Great app!
Thanks for your comment. You can stop a Virtual Stick mission if you move the sticks or if you switch the flight mode from normal to sport for example. The inception mission start from 3m. You can change this value in the settings from the map-creator from 2m to 12m.
Good evening Killian and thank you for the tutorial However, I don't have on my screen the % overlap of the photos, and the FOV setting of the Camera ??? For information, I'm on Mac OS For the rest it's perfect Thank you very much Louis
Hi Killian, I recently updated the app, but I notice that on the PC the circle works with KMLs, but in CSV and on Litchi, it turns into a Helix route. Have you noticed this problem? Thank you for your reply.
I did not quite understand, how do you set the picture amount, camera angle etc. Or the app make all this by it self and when uploader into litchi app the mission is executed automatically?
The image photo distance helps you to set the amount of pictures. The angle is at -70°. You can edit the pitch angle in the CSV file or in the hdrpano APP 3D you can overwrite it. If you use Litchi you must first upload the mission in the flighthub flylitchi.
@@KilianEisenegger One problem i met was that once you activate the mission flight, the sensors are disabled, and i found out the hard way, good that it was a small bush in wish the drone crushed. So first you go to position, then u make sure there is no obstacles and after that you give go to the mission. After the first test i must say that am really impressed by the workflow, great job !
Yes this is normal. The new map-creator add elevation to any polygon and not only 4 waypoints. In this video map-creator could only add elevation to 4 waypoints.
Hi Kilian. Great video and I'm very interested in try something like this out. Is it HDRPano 3D for taking the images and map-creator for stitching them together? Are these Apps created by you? If so I'm mega impressed. Also if they are, is there a try for free option? Oh by the way I only have a DJI Mini 2
You need PTGui for the stitching. hdrpano 3D is for taking panoramas and fly missions. The map-creator is a 2D and 3D mission creator for my APP’s and Litchi. There will soon be a free option on iOS.
hello, i want to save the KML file, but gives an error "KMZ Creation Problem!, theres is a problem with the wayline and template file creation" how can i fix this to save the file and then use it in google earth? thanks a lot for the video and the app
The Air 3 works only with SDK 5. Only Android is supported. I have customers who uses Litchi Beta with CSV import from the map creator. Actually the SDK 5 does not support the AIR 3. It will be supported soon I guess
@@KilianEisenegger Thanks for your answer. I'm about to buy the AIR 3 and I hope to use it for photogrammetry. So maybe.. in the future... I can use it with the map-creator?
@@ritarn_ab When you are interested for photogrammetry I recommend the Mavic 3 Enterprise with mechanical shutter. With the Mavic 3 Enterprise you can import kml files from the map-creator. Do you have already an aircraft?
@@KilianEisenegger Again, thanks for your answer. The thing is that photogrammetry is only a small part of my bussiness. I mostly shoot videos for commercial use, advertising, short clips for social media etc. I bought the DJI MAVIC AIR for many years ago and now I need a new drone. I think the MAVIC ENTERPRISE is way too proffesional and expensive the lack of hours I might use it.
@@KilianEisenegger Now I have done some quick research and found out that the AIR 3 got Waypoint mode, also tiltable camera that reach over the horizon. That including the Omnidirectional Obstacle Sensing maybe makes me buy one.
Thanks, Interesting! I'd like to replicate your work with the air2s and an androidphone. Is there something I should know beforehand or will it work similar?
@@KilianEisenegger I was gonna ask the same, since I saw on your website that your app is iOS only... I found the Litchi App for Android, but we still need the map-creator right? and that is MacOS only? Could you maybe make a video or just answer here with an explanation about the steps and software needed for people without Mac and iPhone, that would be awesome, thanks!! Very impressive work you are doing! EDIT: I just found this very nice looking app Dronelink which also can fly missions and lots of cool stuff. Could the missions you created in the map-creater also be used with Dronelink?
@@nightcat5443 You can use Pix4Dcapture to create flat 2D grids for Android. Dronelink uses own methods to create grids. I will soon start using Kotlin for Android.
@@KilianEisenegger thanks for your reply. So can Pix4Dcapture do the 2D and 3D (elevation) mission planning? If Dronelink cant use them I have no problem to use Litchi to actually fly them in the end.
Thank you! Amazing tutorial. I will try to do a 3D model of a 10 hectares property. Is the same, right? Same procedure. Is it possible to export the data to use it with Cad? Thank you
Sehr gut! Habe nun schon eine weile nach einer (einfach) brauchbaren photogrammetry software gesucht und anscheinend ist epics realitycapture so eines. Ich kann aber den download für macOS nicht finden - gibt es den überhaupt für macOS? Was wäre deiner Meinung nach ein anderes, solides photogrammetry software für macOS, eines das auch nicht-programmieren benützen können? Ich werde mir deine apps reinziehen. Lessigi modäl, gratuliere!
Wenn ich die 3D-Mission starte fliegt die Drohne an den Startpunkt und bleibt dann aber stehen und ich komme nicht weiter. Was mache ich denn da falsch?
Hallo Kilian. Eine Frage zu deinen Apps. Reichen die beiden Apps hdrpano 3d und map-creator auf dem iphone? oder benötige ich noch etwas auf dem PC? Wenn ja ist Windows auch unterstützt oder nur Mac?
@@KilianEisenegger gibt es auch ein Video auf deutsch? Wäre leichter verständlich. Ansonsten werd ich mich durchs englische arbeiten. Danke schon mal für deine Antwort.
Hi Kilian, i've purchased map-creator, i can't export 3d mission quite well. In google earth i only see 1 path and not as your example, three 3d polygons. Why?
@@KilianEisenegger I used hdrpano and this config doesn't work for me. I've followed second by second your tutorial, nothing happens in my google earth, i can't see the 3 "3d polygon" that you created in your example
@@KilianEisenegger I'm an Android and PC lifelong user. Can't WAIT for your Android and PC software to use for this type of 3D effect. Any idea on how long it will be before these programs/apps arrive on the scene? Will I be able to do an entire start-to-finish 3D model with a Mini 2 using your "stuff?"
Hey! if i am not happy with the pitch angle for a 3dmission could i simply change the "gimbalpitchangle" value in the csv? thx for your awesome apps ;-)
Genial! Habe mit Pix4D in 2014 "gearbeitet" als es gerade "Payware" wurde und dann mit Litchi als Tester, aber in der Simplizität wie hier macht das gleich wieder Laune und ist 'ne würdige Konkurrenz! Wünsche viel Erfolg und hoffentlich viele kommerzielle Anwendungsfälle! ;-)
Nice to see second part of postprocess photos
thank you! I've been waiting for this app and MINI 2 support. already the bundle purchased from AppStore.
Hi Killian, thank's, It's perfect 👍
Such a beautiful video thanks Kilian
nice! I will try to do something like this myself :)
Hello Killian,
With version 2.9, I've noticed that after transferring to litchi, the first photo is taken, but not the subsequent ones.
Compared to an older mission, I have noticed that the photo capture interval is no longer displayed in litchi.
Thank you for your feedback
Louis
There are 2 different settings for distance intervall or take photo action.
th-cam.com/video/6yAePrdbPsg/w-d-xo.html
Just purchased your app. Thanks for developing the app and putting this tutorial together. Very helpful! You have a great teaching style and are easy to follow and understand. You mentioned several times to change pitch angle with each orbit/altitude. Is there a standard formula you use to adjust the tilt?
You can imagine a semi spherical globe where we always point to the center.
So you can basically do something like this for a lot and then use inside 3dsmax for example to photo match a rendering of a building ? Very cool thanks.
Great app! Thanks. But is there a way to easily calculate the % of the overlap? Let say, i'm flying with my Mavic 3 at 50m altitude and I want 80% overlap. What would be the distance between waypoint lines etc.
Thanks for your message. I will add the overlap in % in the next release. You can calculate the overlap with the FOV angle.
Hi! First of all I would like to thank you for this application. It's great and the price is very affordable. I wanted to ask if it is possible to stop a Fly Mission during it? The second question is that when you have the Inspection mission, you can somehow change the lower level from which the flight should start, from what I see it always starts from the ground level and I can't find out if it can be changed somehow. Regards! Great app!
Thanks for your comment. You can stop a Virtual Stick mission if you move the sticks or if you switch the flight mode from normal to sport for example. The inception mission start from 3m. You can change this value in the settings from the map-creator from 2m to 12m.
so this doesn't work on windows then
Good evening Killian and thank you for the tutorial
However, I don't have on my screen the % overlap of the photos, and the FOV setting of the Camera ???
For information, I'm on Mac OS
For the rest it's perfect
Thank you very much
Louis
This is the beta version. You find the link in the description.
@@KilianEisenegger thank’s 👍
Great tutorial! How accurate are then the measurement compared to the real object? DId you ever check?
The proportions are very accurate. For architecture use you need a reference measurement.
Tutorial for realitycapture pls thanks❤❤❤
Hi Killian, I recently updated the app, but I notice that on the PC the circle works with KMLs, but in CSV and on Litchi, it turns into a Helix route.
Have you noticed this problem?
Thank you for your reply.
Thanks for your feedback. I will fix this in the next release this week
Bro This is what needed to start my career in PHOTOGRAMETRY. Thank you. How can I download your app?
You can test my beta version
testflight.apple.com/join/SpKh9PiW
Hi Kilian, the apps looks so nice, are you planning to make a version for android? I would appreciate that, thanks for your content.
There are no plans for Android until the Mavic 3 is supported from the SDK 5
I did not quite understand, how do you set the picture amount, camera angle etc. Or the app make all this by it self and when uploader into litchi app the mission is executed automatically?
The image photo distance helps you to set the amount of pictures. The angle is at -70°. You can edit the pitch angle in the CSV file or in the hdrpano APP 3D you can overwrite it. If you use Litchi you must first upload the mission in the flighthub flylitchi.
@@KilianEisenegger One problem i met was that once you activate the mission flight, the sensors are disabled, and i found out the hard way, good that it was a small bush in wish the drone crushed. So first you go to position, then u make sure there is no obstacles and after that you give go to the mission.
After the first test i must say that am really impressed by the workflow, great job !
Hi! I follow your video but after I create 4 wps in 2D mission (4:33 in video) I see no 2D/3D switch next to settings button.. any idea?
Yes this is normal. The new map-creator add elevation to any polygon and not only 4 waypoints. In this video map-creator could only add elevation to 4 waypoints.
Hi Kilian. Great video and I'm very interested in try something like this out. Is it HDRPano 3D for taking the images and map-creator for stitching them together?
Are these Apps created by you? If so I'm mega impressed. Also if they are, is there a try for free option?
Oh by the way I only have a DJI Mini 2
You need PTGui for the stitching. hdrpano 3D is for taking panoramas and fly missions. The map-creator is a 2D and 3D mission creator for my APP’s and Litchi. There will soon be a free option on iOS.
For photogrammetry 3D calculation you can use Meshroom. It is free.
GREAT video! I'm deeply intrigued and would love to try this out. So Map-Creator is the Flight Planning and UAS control of the equation correct?
Yes it is.
hello, i want to save the KML file, but gives an error "KMZ Creation Problem!, theres is a problem with the wayline and template file creation" how can i fix this to save the file and then use it in google earth? thanks a lot for the video and the app
Switch in the settings to Google KML.
purchased the bundle, does it have mini3pro support?
Thanks for purchasing the bundle. The Mini 3 Pro is not supported on iOS. It only works on SDK 5 on Android
@@KilianEisenegger Is there an android app
Where can I find a list of supported drones
In the APP description on iOS you find all supported products.
Is this only available for DJI? Any way to use it with different drones, like Holy Stone?
is there a contour lines in that software??
What do you mean with contour lines
How good are the details when you zoom in?
If you need close details you must increase the number of pichtures.
@@KilianEisenegger ahhh okay so you can still obtain that with , say the new mini ?
Hi Kilian. What are your thoughts about the new DJI AIR 3 drone. Do you think the Map-Creator app works on that machine?
The Air 3 works only with SDK 5. Only Android is supported. I have customers who uses Litchi Beta with CSV import from the map creator. Actually the SDK 5 does not support the AIR 3. It will be supported soon I guess
@@KilianEisenegger Thanks for your answer. I'm about to buy the AIR 3 and I hope to use it for photogrammetry. So maybe.. in the future... I can use it with the map-creator?
@@ritarn_ab When you are interested for photogrammetry I recommend the Mavic 3 Enterprise with mechanical shutter. With the Mavic 3 Enterprise you can import kml files from the map-creator. Do you have already an aircraft?
@@KilianEisenegger Again, thanks for your answer. The thing is that photogrammetry is only a small part of my bussiness. I mostly shoot videos for commercial use, advertising, short clips for social media etc. I bought the DJI MAVIC AIR for many years ago and now I need a new drone.
I think the MAVIC ENTERPRISE is way too proffesional and expensive the lack of hours I might use it.
@@KilianEisenegger Now I have done some quick research and found out that the AIR 3 got Waypoint mode, also tiltable camera that reach over the horizon. That including the Omnidirectional Obstacle Sensing maybe makes me buy one.
Good afternoon and great job.
I have never used any of this software... do you have a more detailed tutorial on them?
Best regards
I have several tutorials about photogrammetry.
Thanks, Interesting! I'd like to replicate your work with the air2s and an androidphone. Is there something I should know beforehand or will it work similar?
You could use the output from the map-creator for Litchi. The 3D semi sphere has to be saved as Helix. My APP hdrpano exist only on iOS.
@@KilianEisenegger I was gonna ask the same, since I saw on your website that your app is iOS only...
I found the Litchi App for Android, but we still need the map-creator right? and that is MacOS only?
Could you maybe make a video or just answer here with an explanation about the steps and software needed for people without Mac and iPhone, that would be awesome, thanks!!
Very impressive work you are doing!
EDIT: I just found this very nice looking app Dronelink which also can fly missions and lots of cool stuff.
Could the missions you created in the map-creater also be used with Dronelink?
@@nightcat5443 You can use Pix4Dcapture to create flat 2D grids for Android. Dronelink uses own methods to create grids. I will soon start using Kotlin for Android.
@@KilianEisenegger thanks for your reply.
So can Pix4Dcapture do the 2D and 3D (elevation) mission planning?
If Dronelink cant use them I have no problem to use Litchi to actually fly them in the end.
Thank you! Amazing tutorial.
I will try to do a 3D model of a 10 hectares property.
Is the same, right?
Same procedure.
Is it possible to export the data to use it with Cad?
Thank you
If you import the 3D model in blender you can export it for Autodesk
@@KilianEisenegger Thank you for your help.
🙏
Amazing software!
Congrats
Sehr gut! Habe nun schon eine weile nach einer (einfach) brauchbaren photogrammetry software gesucht und anscheinend ist epics realitycapture so eines. Ich kann aber den download für macOS nicht finden - gibt es den überhaupt für macOS? Was wäre deiner Meinung nach ein anderes, solides photogrammetry software für macOS, eines das auch nicht-programmieren benützen können?
Ich werde mir deine apps reinziehen.
Lessigi modäl, gratuliere!
Ich verwende Metashape von Agisoft. Das gibt es auch für MAC
@@KilianEisenegger Merci, funktioniert bestens!
Wenn ich die 3D-Mission starte fliegt die Drohne an den Startpunkt und bleibt dann aber stehen und ich komme nicht weiter. Was mache ich denn da falsch?
Im Virtual Stick Mode ist es von Vorteil mindestens 3m weg vom Startpunkt die Mission zu starten. Der Kompass muss am Ort kalibriert sein.
Hallo Kilian. Eine Frage zu deinen Apps. Reichen die beiden Apps hdrpano 3d und map-creator auf dem iphone? oder benötige ich noch etwas auf dem PC? Wenn ja ist Windows auch unterstützt oder nur Mac?
Die beiden APP‘s auf iOS reichen
@@KilianEisenegger okay und wie mache ich aus diesen vielen Bildern eine 3d Datei? welches Programm benötige ich hier?
@@lucca6747 Meshroom ist gratis. Reality Capture kostet beim Export der Daten pro 3D ca. 2.- CHF.
@@KilianEisenegger okay, vielen dank!
What pc setup is needed?
NVIDIA graphic card with CUDA 11 capability and minimum 32GB RAM. You can start with Meshroom or Reality Capture.
congratulations you are a master in this field, please let me ask you, can i do the same using Dji Mavic Mini 1?
Yes you can
th-cam.com/video/K4961zdepLc/w-d-xo.html
Wie Geil ist das denn... Kann man damit auch Innenräume dann so begehbar machen ?
Ja das geht, wenn ich das Objekt auch von innen fotografiere. Innen verwende ich aber keine Drohne.
@@KilianEisenegger Werde mich mal dahintersetzen. Danke für das Video. So ewas in der art habe ich schon gesucht
Das isch huere guet!
Hi bin zufällig hier rauf gestoßen. Ist das alles automatisiert was die Drohne dann macht? Hab eine DJI Mini se. Geht das mit der auch?
Die Mini SE geht nur bis +20º. Das Shooting ist automatisch.
@@KilianEisenegger gibt es auch ein Video auf deutsch? Wäre leichter verständlich. Ansonsten werd ich mich durchs englische arbeiten. Danke schon mal für deine Antwort.
Hey ! Nice details! :) Can you tell how big was the obj file?
1.66 GB unzipped from Reality Capture. 115 MB unzipped after blender edit.
Thanks for this interesting video. Please what is the name of this application. Can you share the link?
apps.apple.com/ch/app/map-creator/id1549471927
apps.apple.com/ch/app/hdrpano-3d/id1525362560
There are bundles too
Hi Kilian, i've purchased map-creator, i can't export 3d mission quite well. In google earth i only see 1 path and not as your example, three 3d polygons. Why?
Did you use the helix configuration. Without helix set you get only 3 circles.
@@KilianEisenegger I used hdrpano and this config doesn't work for me. I've followed second by second your tutorial, nothing happens in my google earth, i can't see the 3 "3d polygon" that you created in your example
@@photocane In the settings unselect DJI Pilot KML. Select helix in 3D and then export KML. I added some functions for DJI Pilot since this video.
@@photocane Do you use the iOS or Mac OS APP?
@@KilianEisenegger mac os , i just followed step by step your tutorial;
Wow, great results. Any plans to support the enterprise drones like the M300 with P1 camera? I would certainly purchase the app if it did!
The M300 and M30 are on Android with SDK5. Actually I do not support them. Pix4D are the best for mixed lidar support
Is there an alternative to the map-creator that's not Apple??
Watch my latest video where I trandslate a polygon with a simple python programm to full terrain photogrammetry. There are other tools like dronelink.
really good work ! but is the mini 1 supported ?
Yes of course
Can you please share the drone images?
You can download images from another tutorial. Meshroom 2023, Blender 3.5, Sketchfab Photogrammetry
th-cam.com/video/-T1VgW6rjkQ/w-d-xo.html
@@KilianEisenegger Thank you very much Sir for these images 🙌
Is this app still being supported
Yes and there will be an Android version.
@@KilianEisenegger I'm an Android and PC lifelong user. Can't WAIT for your Android and PC software to use for this type of 3D effect. Any idea on how long it will be before these programs/apps arrive on the scene? Will I be able to do an entire start-to-finish 3D model with a Mini 2 using your "stuff?"
Hey! if i am not happy with the pitch angle for a 3dmission could i simply change the "gimbalpitchangle" value in the csv?
thx for your awesome apps ;-)
Yes of course
@@KilianEisenegger is it correct that the POI height will be 0m for a 3dmission? how to abort a mission?
@@sk8fly18 No it is the start altitude. You can see that in the video
@@KilianEisenegger oh i see….can i abort the mission during one? Are there any plans to integrate resume a mission? Thx
@@sk8fly18 You can stop at any time a mission. Resume is not implemented yet.
Impress! Can you share what's the name of this software?
iOS hdrpano 3D and map-creator iOS and Mac OS
DJ mini 3?
The DJI Mini 3 is not supported from the SDK
@@NickNam3 The SDK for the Mini 3 is planned for 2023. We do not know details.
Does it work on DJI PHANTOM 4?
It works on Phantom 4 Pro
reality capture is windows only :(
Yes most of the photogrammetry programs use NVIDIA Cuda cors.
Android app alternatives?
Not for the map-creator. But Litchi can import those CSV mission files
i have android. R.I.P.
Never 3d map when you have the sun bright. Always map with diffuse light sky. Shadow in your model have zero value for business usage.
Yes of course. But I did some SW tests on this shooting. In the mean time I have M3E shootings without direct sun light.