IOT NodeMCU ESP8266 Weather Station Kit
ฝัง
- เผยแพร่เมื่อ 10 พ.ย. 2024
- IOT NodeMCU ESP8266 Weather Station Kit
The time has come to learn some new stuff. While I try to find my original footage of this kit, have a look at it and if you like it you may be able to order it or scrounge the parts by the time I make a construction video!
Amazon have a selection of these:
USA: amzn.to/2U4OOoW
UK: amzn.to/39ayiYN
Come chat with me on discord / discord
See my recommendations on Amazon: www.amazon.co....
If you would like to buy me a coffee or support the channel you can do so via Patreon at / backofficeshow
I do have some bits and pieces on my web store at backofficeshow.com
Please note: As an Amazon Associate I earn from qualifying purchases. As such links to Amazon products within this video may fall under this. Thanks to all of you who use these links and help support the channel - you are fantastic!
Thanks you lovely people, and keep on tinkering!
A nice kit for a beginner. FYI, there are two different styles/widths of ESP8266 NodeMCUs. The one you have are wide ones. It usually has 'LoLin' printed on the backside. The narrow, breadboard friendly, ones have 'Amica' printed on the backside. I've had both and function the same as far as I know. A BME280 sensor could replace both the DHT11 and BMP180 pressure sensor and is more accurate temp/humidity wise at a similar cost.
Or maybe just replace the dht11 by an am2320 as a cheap solution without changing too much the installation. It's more accurate than the dht11 and uses i2c as well
Did you ever find the original build footage? I have the same kit but the instructions are awful and the code doesn't work.
Have been messing around with code from the web and got various sensors working, but combining it all together is proving a bit problematic at the moment.
Ah, found it now.
I have the IOT NodeMCU ESP8266 Weather Station Kit, my kit doesn't have the URL for instructions. Can you send me your URL? I think this would be a fun kit to put together as an introduction to IOT.
Hello, beginner here I got one of these kits for my first project but I don't know how to flash the code into the esp8266 board. Do you think maybe you could make a video on how to flash code into an esp8266 board while using this kit as an example because I don't know how any of this works. Thank you for your time and consideration, I hope you have a wonderful day
Do you have the link to the instructions? My kit did not come with any instructions
Finding it hard to get a wiring diagram anywhere.
You have Manuel ?
I'm bloody cold today. Please turn the temperature up.
No problem, I'll just flick the switch
Do you have the tutorial as PDF?
I just followed the URL, then ignored it and googled it 😂
@@backofficeshow same
@@backofficeshowwhat do we have to type to find the url, cause my kit doesn't have it
No idea what you said about the wi-fi. The kid sounds interesting though ;)
Is this a result of COVID isolation or Adrafinil ;) Interesting videos, either way.
Both and you are lucky, you must have nearly 1400 more to watch 😂
uh-huh, lucky me .. I'll get right on it, as soon as I feed the cat. I just have to put on a hasmat to go buy some.
That sucks, but in a few months it will all be over and we will all maybe he a little more grateful for our freedoms. Can you imagine how quarantine should have been before the internet?