This is the one video that showed & explained step by step how to do it myself rather than "go buy another one" thank you for your patients & sharing your knowledge, as a newbie to wood working you are one of the few that I garner great knowledge of the trade from thank you for all you do & keep up the great content. Thank you
Feel like a right idiot. My planer blades were damaged and thought to throw it out and buy another as I couldn't find how to repair. Years later and still not throwing it out, you spoke of double sided blades. I've just checked after struggling to plane the bottom of a door, and I've just found 2 new blade edges tucked away in the head! Just going to grab my tool box to turn them around! Thankyou ever so much! Small things like this BIG realization cheers me up no end! THANK YOU!!!!
Best TH-cam video about this BlackDecker planer 👍👍👏👏 very good I had a problem with the blade angles and it was causing a terrible noise and tremor You won one more I am a Brazilian from Recife 😎👍👏
Sergio. Great tutorial. I have exactly same system on my planer and had tried to change the knifes but ran into problems but after watching your video i can now change. Many thanks.
Excellent. Clear and simple explanation for planes with this type of holder. If you only turn out the middle bolt it makes leveling the blades easier as there is only one part to loosen if needed. Then verify the height after securing everything. Good work though.
Bravo. It's getting harder every day to find good instructional videos. Yours is great! Thank you. I have a Porter Cable. Exactly the same type of blade and adjustment. I've spent an hour on Porter Cable's site looking for instruction (starting with the manual). They don't even mention an Allen wrench in their. instructions! (This is typical for PC instructions) You went through step by step on how to replace and then adjust the blades, going back and forth between Allen wrench and open end. Thanks again.
Thank you so much for the clearest explanation yet. The instructions that came with my Kraft Tech K-3600T (a very similar machine to yours) were frankly crap...
Thank you, very good clear instructions. I used a small piece of plate glass myself to line the blade with the base plate, but now I think your piece of wood may be better.
Thanks for a very good video, just the information I was looking for. I learned a lot and it will now save my 2002 FERM planer from going in the recycle rubbish bin
Thanks a lot. The blades on mine would not pop out easily. Had to tap them out gently with a hammer using a small block of wood in between the hammer and blade to protect the blade. After that no problem. Didn't adjust the screws though - left it at the same height.
"Everything" is easy, when you know how to do it :-) Perfect tutorial (I think that most hand held electric planers have more or less the same system). Thanks for sharing.
It is possible to change blades without removing the blade carrier so there should be no need to touch the blade height adjusting screws. I just slackened off the three pinch bolts and tap out the old blade.
The blades on my Black & Decker P71-03 has the three fixing bolts but does not have the height adjustment screws and the blade remains +/-0.5mm below the level of the base plate. Could anyone advise on how to adjust them, please?
This is the best video to learn about changing and adjusting planer blades. Thanks!!!
The best explanation I saw about adjusting the blades. Thank you.
Very clear and easy to follow thank you very much
This is the one video that showed & explained step by step how to do it myself rather than "go buy another one" thank you for your patients & sharing your knowledge, as a newbie to wood working you are one of the few that I garner great knowledge of the trade from thank you for all you do & keep up the great content. Thank you
Thank you. Best instructional video I have seen yet. I'm going to change my blades.
The best and most comprehensive guide to the job available in video, thank you for making this!
Brilliant video. How many times have i struggled to do this. This Video shows me exactly with the pitfalls. Thanks
After all these years you keep helping people with this vídeo, thx!👏🏻👏🏻👏🏻🙌🏼
Best vid I've seen on how to change the blades! Thanks Serge!
Best video I've found on this subject. Masterclass. Thank You.
Feel like a right idiot. My planer blades were damaged and thought to throw it out and buy another as I couldn't find how to repair. Years later and still not throwing it out, you spoke of double sided blades. I've just checked after struggling to plane the bottom of a door, and I've just found 2 new blade edges tucked away in the head! Just going to grab my tool box to turn them around! Thankyou ever so much! Small things like this BIG realization cheers me up no end! THANK YOU!!!!
It would be great if we could turn all the blades in all woodworking tools, like in planer knives 😁
Best TH-cam video about this BlackDecker planer 👍👍👏👏 very good
I had a problem with the blade angles and it was causing a terrible noise and tremor
You won one more
I am a Brazilian from Recife 😎👍👏
Precise and straight to the point, very informative video, well done...
Sergio. Great tutorial. I have exactly same system on my planer and had tried to change the knifes but ran into problems but after watching your video i can now change. Many thanks.
I was struggling to get the knife blades to the right height, but now I know - Thanks for the help
Thank you. I have been searching for hours on how to adjust the height on this type of router.
Excellent. Clear and simple explanation for planes with this type of holder. If you only turn out the middle bolt it makes leveling the blades easier as there is only one part to loosen if needed. Then verify the height after securing everything.
Good work though.
I echo what most have said, the clearest most comprehensive video with out over complicating the job
Bravo. It's getting harder every day to find good instructional videos. Yours is great! Thank you.
I have a Porter Cable. Exactly the same type of blade and adjustment. I've spent an hour on Porter Cable's site looking for instruction (starting with the manual). They don't even mention an Allen wrench in their. instructions! (This is typical for PC instructions) You went through step by step on how to replace and then adjust the blades, going back and forth between Allen wrench and open end.
Thanks again.
Very well done. Precise and to the point!
Excellent detail explanation!
Thank you so much for the clearest explanation yet. The instructions that came with my Kraft Tech K-3600T (a very similar machine to yours) were frankly crap...
Excellent instructions, thanks for sharing.
Thank you, very good clear instructions. I used a small piece of plate glass myself to line the blade with the base plate, but now I think your piece of wood may be better.
Thank you Sergio,excellent tutorial!
Perfect explanation, just what I was looking for. 5* thank you
Thank you so much
So grateful knowledge share
Good job
Love from India ❤️
Brilliant video thank you the handbook doesn’t give any instructions and I didn’t have any idea how to change the blades
Thank you, so much! Clearly explained!!
Very detailed and informative instructions. Many thanks!
Great video. Thank you for making it.
Great video helped me a lot
Full view and Like
All the best
Yiannis (Athens Greece)
Thank you very much and thanks for watching 😀
Thank you. Very clear and concise.
Thank you for making this helpful tutorial.
Thank you very much for posting - big help
Excellent video very well explained...thanks for sharing
Good simple video
Great and informative video .
Really useful video, thx.
The best oroduct black decker nice
Thanks for a very good video, just the information I was looking for. I learned a lot and it will now save my 2002 FERM planer from going in the recycle rubbish bin
Thank you for the good explanation.
Thank You for this video, what a great help!
Very much usefull to me
Thanks a lot. The blades on mine would not pop out easily. Had to tap them out gently with a hammer using a small block of wood in between the hammer and blade to protect the blade. After that no problem. Didn't adjust the screws though - left it at the same height.
Thanks for watching Paul. Sure in all brands there is always a trick to take the blades away 😀
Thanks Sergio I have not had to do this yet.
t is funny you say that, I am working on a metal detector for a planer now in my shop.
Thank you .well done
Ah you make it look so easy.
"Everything" is easy, when you know how to do it :-)
Perfect tutorial (I think that most hand held electric planers have more or less the same system).
Thanks for sharing.
Sergio Acuña Padin TH-cam probably has a video how to adjust height I'm sure. Good video thank you
Lifesaver thankyou.
👍 Thanks for watching 😃
Thank you, very helpful.
Pls have a video on how to sharpen knifes of planer with smaller blades
Good video sharing, thanks
Well done! Thanks.
good job sir
Thank you for sharing👍
Life save thanks
Thank you so much!
It is possible to change blades without removing the blade carrier so there should be no need to touch the blade height adjusting screws. I just slackened off the three pinch bolts and tap out the old blade.
That's correct. The blades can be changed without removing the carrier, I think he was just demonstrating how to clean underneath it if need be.
Mas claro no canta un gallo :) Gracias Bro!
Thank you very much
Olá muito obrigado foi de muita valia
Can I use this planer to grate my cheese.
It looks very good way for making cheese for my bolognese.
Thank you
Excelente e simples a didatica
Muito obrigado Jose Eloy
is this standard blade or universal blade for different brand of planer
should the knives be like your to use in your homemade thinner planer ?
are the boards become straight ?
The blades on my Black & Decker P71-03 has the three fixing bolts but does not have the height adjustment screws and the blade remains +/-0.5mm below the level of the base plate. Could anyone advise on how to adjust them, please?
This is Black&Decker KW712, right?
Name of this planner please
Prosto i na temat. Oto chodziło
thanks !!!
parabéns gostei
Traduz em português para eu entender
i keep makin a bow in wood after planning
Can we get in india 🇮🇳
10 10
brišu ovaj grupi oglas
Nao acha. Dessa. Lamina. Quando. E. Cara
Very helpful, thank you.