The MOST EFFECTIVE Way to FLUSH Your Cooling System! - Using Water AND Air! - Mityvac MV7270

[@tribulationprepper787]

I am so thankful for the fast forward button. This could have been and should have been a 20 minute video.

[@tribulationprepper787]

At 34:00 into the video, with tap water still residing in the block, THIS IS WHERE you need to button up the system and fill the system with DISTILLED WATER and a bottle of coolant flush AND THEN run the vehicle with the heater set at full hot for a few hundred miles or so AND THEN flush the system again and again until the water runs clear AND THEN blow the water out with your Amazonk tool AND FINALLY refill the system with MORE DISTILLED WATER and anti-freeze at the recommended 50/50 dilution . Don't leave that mineralized tap water in your block and expect great, long lasting results. I am so thankful for my fast forward button. This could have been and should have been a 25 minute video.

[@Mike-01234]

Just pull the coolant drain plug on the block that water will come out.

[@kotjmf1968]

Thank you for showing the bad effects of using something designed to "get you by" in an emergency being used as a lazy way to try to avoid a repair. People who do that stuff just create bigger problems.