I have to tell you how valuable your TH-cam channel is, not just to see your machines run, but for these how to videos. I had to revisit this as my valves went out of adjustment somehow. Got it dialed back and in. Thanks for the channel, your knowledge and the best splitter on the market.
Andrew these videos are the meat and potatoes guys are looking for. Written or verbal instructions are good but typically most men are visual learners and seeing a demonstration is way better then reading about it. Thanks for sharing.👍TCT
My 22-28 had started to kick out a little too easily on the forward stroke. A quick search found this video... problem fixed! This is a great instructional video Andrew. Thank you!
Hot damn! Bout time all of his hard work will be rewarded in machine throughput! The only thing this machine needs is a cup holder! Congratulations Scheib
Finally Sheib is joining us in the Eastonmade family, super cool. My friends who ran my ruggedmade didn't understand why I had ordered a 22-28, then it arrived and they got to see for themselves why I did it. No one who sees this Eastonmade is ever dissapointed and many guys who see it know what it is already, and everyone wants to see it work.
Andrew let the truck driver know they need to stop in western Pennsylvania to allow an inspection and test run of that 22 before it makes its way to central Pa.
Round 2 it - nice - if you need more of them just give a shout. We are in the thick of the polar vortex cyclone bomb winter storm. Lots of nice dry wood to stay warm. Merry Christmas to all and to all a good night.
Nice video as all ways nice to see a new video Andrew what is the price now in 2023 since this video is couple weeks old do you have a dealer here in northern Ohio? Thanks be waiting to here back 👍
Dana here aka Millie’s dad. I can say this much about prince valves, they can get the job done, they are not too expensive (but not cheap either), they are easy to get. That being said they are NOT industrial quality. They don’t last and they act up more frequently than they should. I’m speaking of the ubiquitous mono block valve that prince makes into the auto-cycle. Just set the prince on the bench beside the galtech. The shear mass of the galtech tells a whole story in itself. Prince runs a singe detent ball and will cut a groove in the spool in as little as 50 full cord or use with the Detent psi set at 2,800 psi On the extend spool the retract spool set at about 1,200 psi will outlast the extend spool by three times. Basically what I’m saying is they are in my opinion a consumable item so plan on changing them out on a regular basis. I’m not too sure but I think prince will sell you a new spool so you can rebuild the valve. Just my real life experience speaking. Not going to debate this with anybody in any way.
Outside with Sheib! Love the Miller Lite beer at the start Andrew! LOLI have a Ruggedmade splitter like he does. My 12-22 should be done next month...I hope! Merry Christmas to you and your family!
Hey Andrew we don't get much on the eastonmade log splitter down here in the south but I would like to see more of them down here in north Ga. Can you give me more information on them
Good day Andrew Merry Christmas to you and family. Great explanation and video on how to adjust these valves should help many people out. The start of the video cracked me up😂 cheers 🍻 👌🏻🔥🇨🇦
Great video Andrew! I own a 12-22 and absolutely love it! In this vid you mentioned once adjusted, if its not tight and gets run, the o-ring inside is wrecked and oil will come through. Would it be possible for you to do a video on replacing that o-ring within the detent assembly. I would love to see how it is done as I think I might have "wrecked" mine by not tightening it up enough. Thank you!
@leroysavoie2981 have you check the manual? If he was turning to the right he would be backing it out. Do half a turn and see if it helps. Always keep track of how much you turn it so you can put it back if need be. I will get Andrew tagged too.
One of our customer requested us to supply complete solution valve and remote radio, when we finish we will be happy to share results here.. Is that possible?
If you turn the allan screw in the detent will kick off at a higher pressure. The forward detent needs to be set 300-400psi lower than the retract detent
After making this video it may be wise to machine or scribe a mark into the housing and barrel so if anyone tempers with it and cries "Warranty" it's not as simple to cover up as a paint marker that can be wiped off and reapplied. Merry Christmas Andrew to you and your family from Western New York. Stay safe during the blizzard this weekend!
Another reason I'd buy your product if I had any money. You will show people how to fix or adjust it. As far as the person that's getting it I guess I'm missing someone's videos that people seem to like 🤷♂️
That'll be awesome. Great job setting up the video by the way. Lite beer and the obvious tag. I was like he's going to say it any minute now, and then no whoooo. It was funny good job. Merry Christmas to you all.
Andrew, I have tried to buy an Ultra online several times and can not do it. I have written emails with no response. If you want to sell more products, you have to fix the ordering process. I have watched In the Woodyard with Chris for years and are sold on the product
I don’t know those instructions don’t work on my 12/22? Maybe it’s because I was using a metric adjustable wrench instead of a standard, I thought you guys use metric in Canada or maybe it is because I only ordered mine 13 months ago and I didn’t start a you tube channel?
I plan on making a comparison video to the super split that the 12/22 is replacing. I know you did that before but I think I can show some details you overlooked. I would really like to compare the 12/22 to the competition you continually elude to in your videos, should we call them mutt mountain or dog hill? I haven’t seen a side by side video with an eastonmade and that brand.
@clarkharms i dont think you'll likely see either one of us do one of those videos. Both machines are very comparable and i think we share a mutual respect for one another.
And let’s be honest you have been doing comparisons just breaking it down into single components. “Why we don’t offer a magnum cylinder “, why we use the galtech valves, why our pusher plates are made this way, why we use replaceable machined wear components. I can’t remember all of the videos off the top of my head but you have had direct responses from that other guy to your videos. To be sure the videos are effective and good points are made, enough to change my mind on which splitter to buy even if I have to wait a bit longer.😢
![[DRIP] ‘Love, Maybe’ PREVIEW](http://i.ytimg.com/vi/U7hwHp95m1k/mqdefault.jpg)
![[Gegagedigedagedago] NEW Help Gegagedigedagedago Nugget escape from Nikocado Avocado Challenge](http://i.ytimg.com/vi/hJWnwRC2Fz8/mqdefault.jpg)
I have to tell you how valuable your TH-cam channel is, not just to see your machines run, but for these how to videos. I had to revisit this as my valves went out of adjustment somehow. Got it dialed back and in. Thanks for the channel, your knowledge and the best splitter on the market.
Andrew these videos are the meat and potatoes guys are looking for.
Written or verbal instructions are good but typically most men are visual learners and seeing a demonstration is way better then reading about it.
Thanks for sharing.👍TCT
Thanks tony. Really great to hear from you
My 22-28 had started to kick out a little too easily on the forward stroke. A quick search found this video... problem fixed! This is a great instructional video Andrew. Thank you!
Very nice, you just saved yourself a wee bit of phone calls. Merry Christmas
Merry christmas william. Appreciate the support
Hot damn! Bout time all of his hard work will be rewarded in machine throughput! The only thing this machine needs is a cup holder! Congratulations Scheib
Finally Sheib is joining us in the Eastonmade family, super cool. My friends who ran my ruggedmade didn't understand why I had ordered a 22-28, then it arrived and they got to see for themselves why I did it. No one who sees this Eastonmade is ever dissapointed and many guys who see it know what it is already, and everyone wants to see it work.
We sure are happy to have scheib. Really appreciate the support
Scheib, got himself the best built commercially manufactured log splitter on the market. Period.
@@smorefirewood
Check the spelling of the name
@@larrykluckoutdoors8227 oops.
@@smorefirewood
I thought the same thing, but then I realized the spelling was wrong
Great info to have, thanks for the heads up.
Chuck
hi there , interesting ,good show , john
Wooooo. I wonder where I will see a 12-22 next on TH-cam!
It should be a lot of fun. Appreciate all the supprt james
That was a rather subtle 'product placement' for the owner of that new 12-22. 🤣
Lol. Appreciate all the support
Woo!!
Andrew drinking that Miller Lite is like owning a box store splitter LOL.
maybe a Labatt from north of the border, eh
Andrew let the truck driver know they need to stop in western Pennsylvania to allow an inspection and test run of that 22 before it makes its way to central Pa.
Crikey, Canucks gone soft drinking Lite beer? Never thought I'd live to see that.
Round 2 it - nice - if you need more of them just give a shout. We are in the thick of the polar vortex cyclone bomb winter storm. Lots of nice dry wood to stay warm. Merry Christmas to all and to all a good night.
Really apprecite the support marc!!! Merry christmas
Nice Intro Andrew that was well explained and constructed,
Thanks ebele. Really appreciate the support
Nice video as all ways nice to see a new video Andrew what is the price now in 2023 since this video is couple weeks old do you have a dealer here in northern Ohio? Thanks be waiting to here back 👍
I love the auto cycle on my 12-22. Can’t wait to see the content the new owner makes.
Thanks Steven. Really appreciate the support
Dana here aka Millie’s dad. I can say this much about prince valves, they can get the job done, they are not too expensive (but not cheap either), they are easy to get. That being said they are NOT industrial quality. They don’t last and they act up more frequently than they should. I’m speaking of the ubiquitous mono block valve that prince makes into the auto-cycle.
Just set the prince on the bench beside the galtech. The shear mass of the galtech tells a whole story in itself. Prince runs a singe detent ball and will cut a groove in the spool in as little as 50 full cord or use with the Detent psi set at 2,800 psi On the extend spool the retract spool set at about 1,200 psi will outlast the extend spool by three times.
Basically what I’m saying is they are in my opinion a consumable item so plan on changing them out on a regular basis. I’m not too sure but I think prince will sell you a new spool so you can rebuild the valve.
Just my real life experience speaking. Not going to debate this with anybody in any way.
I completely and totally agree dana. The other valves have the place for sure.
thank you for your help plus thank you for oil cooler that you gave me for free that mean a lot to me you went up and beyond thank you
Uncle Cecil you are the man 😀
No worries uncle cecil. Great to hear from you. Merry christmas
Andrew pleaseeeeeee start selling these valves with your specs so we can upgrade from our prince autocycles!!!
awesome video my friend. Love the pride that you show for you products and your work. Thanks for sharing.
Thanks laurent. Really appreciate the support
Great splitter. Had for 3yrs. How do u adjust the pump? Merry Christmas
Outside with Sheib! Love the Miller Lite beer at the start Andrew! LOLI have a Ruggedmade splitter like he does. My 12-22 should be done next month...I hope! Merry Christmas to you and your family!
Thanks tim. Merry christmas!!!
Thank you for explaining this well explained and videoed
appreciate all the support tim!!!
Wooo!! Can’t wait for Scheib to get this splitter so I can try it out at my woodyard!! 🤤 🍻
Hey Andrew we don't get much on the eastonmade log splitter down here in the south but I would like to see more of them down here in north Ga. Can you give me more information on them
Whoooooo he will love it Andrew, y’all have a Merry Christmas 👍👍🇺🇸🎄
Really excited for scheib to have it. Appreciate the support glenn
Good day Andrew Merry Christmas to you and family. Great explanation and video on how to adjust these valves should help many people out. The start of the video cracked me up😂 cheers 🍻 👌🏻🔥🇨🇦
Have been really excited to make the one. Merry christmas brad
Love the Miller latay!
can’t wait till my 12-22 gets here, ordered 8 months ago, chomping at the bit!Great machines!
You're gonna love it
Great video Andrew! I own a 12-22 and absolutely love it! In this vid you mentioned once adjusted, if its not tight and gets run, the o-ring inside is wrecked and oil will come through. Would it be possible for you to do a video on replacing that o-ring within the detent assembly. I would love to see how it is done as I think I might have "wrecked" mine by not tightening it up enough. Thank you!
🌲Merry Christmas, Andrew!🌲
Merry Christmas Andrew! Was wondering why you had a Lite instead of a Molson Canadian 🤣.
Merry christmas steve. Appreciate the support
Whooooooo, I will be adjusting my 12-22 in the next few days.
Let me know if i can help at all heath. Appreciate the support
Great introduction!! Woooo!!! Looking forward to him using this!!! Merry Christmas to Y'all. Stay Hydrated and Have a Safe Day
Merry christmas david. Really appreciate the support
Love my Eastonmade 12-22. Got it this spring.
We had a great visit to!!! Great to hear from you jais
Great video great splitters! Merry Christmas Andrew👍👍
Hey Andrew, the intro is awesome woooo! Great video, Merry Christmas the Eastonmade family!!
Thanks tc. Really appreciate the support. Merry Christmas
"Someone" is going to have a GREAT Christmas! Happy holidays to you and your team Andrew!
Merry christmas joe. Keep being awesome. Appreciate the support
Hahahaha that intro was great!!!
Had a lot of fun doing it. Great to hear from you scheib
Which way do you turn the other Allen screw to increase he didn’t say he just showed the right one being turned right
@leroysavoie2981 have you check the manual? If he was turning to the right he would be backing it out. Do half a turn and see if it helps. Always keep track of how much you turn it so you can put it back if need be. I will get Andrew tagged too.
@EastonmadeWoodSplitters hey Andrew maybe you can help leroy out here in these comments
One of our customer requested us to supply complete solution valve and remote radio, when we finish we will be happy to share results here.. Is that possible?
Not the Sheib that I was thinking of also. I one I was thinking of is Scheib
That was a good one Andrew
You have a fantastic product and use top of the line hydraulic components, Merry Christmas to you, your family and your team !
Thank you. Merry christmas
Merry Christmas! Good intel!
Thanks zack. Merry christmas
Merry Christmas Shieb!!!!!
Thank you Buckin Firewood
Nice!
Two happy men for Xmas !
Appreciate all the support brad. Enjoy your 12-22
Thanks for info Andrew
Thank you terry. Really appreciate the support
LOL!
Opening segment is hilarious
Lol thanks kevin. I had a pile of fun doing it
HILARIOUS!
Merry Christmas buddy
Merry christmas Robert
🤣Nice intro Andrew! Have a great Christmas 🍻
Merry christmas todd
😂😂😂😂 Merry Christmas Andrew to you and the Family, Junk!😂 Tell us what you really feel😂❄️🚜🪵🇺🇸
Merry christmas larry. Appreciate all the support.
Which way do you turn the back Allen screw on the detract valve do you turn it right like the splitter valve Allen ranch or opposite
If you turn the allan screw in the detent will kick off at a higher pressure. The forward detent needs to be set 300-400psi lower than the retract detent
After making this video it may be wise to machine or scribe a mark into the housing and barrel so if anyone tempers with it and cries "Warranty" it's not as simple to cover up as a paint marker that can be wiped off and reapplied. Merry Christmas Andrew to you and your family from Western New York. Stay safe during the blizzard this weekend!
Really not to much you can hurt from adjusting them. Really appreciate the support jessie. Merry Christmas
Andrew, what is the part number for the gal tech 4 spool valve with auto cycle?
Great intro!
Really excited to have scheib be part of it. Hes a great guy. Appreciate the support
Another reason I'd buy your product if I had any money. You will show people how to fix or adjust it. As far as the person that's getting it I guess I'm missing someone's videos that people seem to like 🤷♂️
Check out ouside with scheib. Great channel
@@EastonmadeWoodSplitters thanks Andrew
What? Andrew no whoooo. 😆
I missed it!!!! Cant wait to have scheib as part of our team
That'll be awesome. Great job setting up the video by the way. Lite beer and the obvious tag. I was like he's going to say it any minute now, and then no whoooo. It was funny good job. Merry Christmas to you all.
Andrew, I have tried to buy an Ultra online several times and can not do it. I have written emails with no response. If you want to sell more products, you have to fix the ordering process. I have watched In the Woodyard with Chris for years and are sold on the product
Call it in M-F, 8-4. That is the way to do it.
Send me an email with your phone number chris. Will make sure someone gets on touch andrew@eastonmadewoodsplitters.com
Woooooooooo!!!!
I don’t know those instructions don’t work on my 12/22? Maybe it’s because I was using a metric adjustable wrench instead of a standard, I thought you guys use metric in Canada or maybe it is because I only ordered mine 13 months ago and I didn’t start a you tube channel?
Entirely possible clark. Maybe its worth your effort to make a couple of well structured videos a week. Never know what might come of it.
I plan on making a comparison video to the super split that the 12/22 is replacing. I know you did that before but I think I can show some details you overlooked. I would really like to compare the 12/22 to the competition you continually elude to in your videos, should we call them mutt mountain or dog hill? I haven’t seen a side by side video with an eastonmade and that brand.
@clarkharms i dont think you'll likely see either one of us do one of those videos. Both machines are very comparable and i think we share a mutual respect for one another.
I think you are being generous, but I may be considered biased.
And let’s be honest you have been doing comparisons just breaking it down into single components. “Why we don’t offer a magnum cylinder “, why we use the galtech valves, why our pusher plates are made this way, why we use replaceable machined wear components. I can’t remember all of the videos off the top of my head but you have had direct responses from that other guy to your videos. To be sure the videos are effective and good points are made, enough to change my mind on which splitter to buy even if I have to wait a bit longer.😢
Above all, insure that you are not dehydrated before attempting this procedure.
How much is an eastern maid 1222 split
Prices are on our website www.eastonmadewoodsplitters.com
Where’s the Scheib hollar?
I missed it!!! Appreciate the support harold
🤣🤣👍🏽
Video started poorly
but you snapped out.
I didnt think i was gonna be able yo salvage it but it turned out alright lol