You can use all the apps at the same time by either of the following approaches. 1. If you don't mind to use your android phone as a webcam, try DroidCam (play.google.com/store/apps/details?id=com.dev47apps.droidcam&hl=en_US&gl=US). This app is free and we have confirmed that you can access the camera from Webcam Motion Capture and VSeeFace at the same time. 2. Set up a virtual camera. Since multiple apps cannot access the same physical camera at the same time, you need to set up a virtual camera. You can set up a virtual camera on OBS. Unfortunately, the OBS's default built-in virtual camera cannot be accessed from Webcam Motion Capture, so please use this plugin instead (obsproject.com/forum/resources/obs-virtualcam.949/). Once the virtual camera is ready, you can access the camera from Webcam Motion Capture and VSeeFace at the same time.
this is looking very good! i am hoping to find a tool for developers to capture the motion directly in Unity and apply the tracking data to a 3d or live2d model. Do you have any plans to release such a SDK?
@@WebcamMotionCapture thank you for the recommendation! i've watched a video of someone using this and it seems like there's a need to run a separate VRM software for it to work. I am hoping to find a plugin for Unity that enables everything to be done within Unity itself.. I'll still go and give EVMC4U a try! perhaps i missed out something
Yeah gave it a shot and it really struggled when I had both hands up it couldn't keep up both the lip sync and hand tracking. It also only really operates in a "sweet spot" about six inches to 12 inches in front of my body and about an 18 inch by 18 inch box, anything closer or further and it just drops tracking. The fact that it can only automatically handle 2 of the 5 expressions that vseeface can is a pretty big negative too and its detection was not great either with very limited settings to control it besides manual controls. The finger tracking is SUPERB, the absolute best I've seen, but everything else struggles. If your hands get too close to each other or too close to your mouth the whole thing just freaks out and doesn't know how to handle it. It's not BAD but it's not something I'd pay the SEVENTY DOLLAR pricetag for. Which is only a bit less than the going rate for a used Leap Motion anyway. If it improves, like REALLY improves to be able to handle these things better especially when both hands are closer together or outside that VERY narrow sweet spot, support the full range of expressions, improve the lip sync settings, and catches up a bit more with VSeeFace's facial detection then it might be worth that hefty pricetag but right now the "expensive devices" it claims to let you operate without might be the better option.
Please let us correct that the concept of a "sweet spot" doesn't apply here. As long as your hand remains visible in the camera, it should be consistently tracked. For an even better tracking experience, please refer to our recommended setup. webcammotioncapture.info/index.php#faq-setup
@@WebcamMotionCapture Unfortunately that was my personal experience with the application. It really only functioned in a very small "sweet spot" though from what I see listed I had the recommended setup. I could see my hands in the little camera view box but it was still struggling badly to maintain tracking and only functioned about six inches to 12 inches in front of my body and about an 18 inch by 18 inch box. I intend to test further in the future but that is what I experienced to a T.
Not sure if anyone else has tried it, but this program also works as a hand tracker for VUP. Same setup as the video here. Webcam Motion capture has been pretty great at being an alternative to leapmotion, but I do have one issue people have pointed out. When casting tracking through VSeeface, usually when testing female models, all sense of bounciness in the body goes away. Hair works fine, but body geometry seems locked to static pose. Will this be incorporated later?
Awesome! | I don't know if this is possible but I'll put it out in the universe!~ It would be cool to have an option to track the arms and hands only (much like with leap motions)
Sure. I try to add an option to send the arms and hands only. Or, if you are using VSeeFace, you have an option on VSeeFace to receive only the arms and hand tracking.
I just downloaded Webcam Motion Capture, but the "normal and Send to external app" is not there. Is it only avaible with subscription?? (PC Version 1.6.0)
If the pricing can go down to 30$ for the one time payment, a lot more people will come running for this. In today's inflated world so many people need to save much more on their financial spending so they are also looking for alternatives to tech and software to not break their bank and not struggle to pay basic home and food necessities. You could easily make much more in profit by lowering the pricing considering how much more people would fly over to this software. Shoot, if you lower it I'll rage and tweet and support this in my streams. I'm a vtuber avatar creator, this kind of software should be easier to obtain to be honest, it'll do good both for you and the community.
Please use our subscription plan. It is just $1.99/month. webcammotioncapture.info/#subscribe We keep the price as low as possible so that the it is affordable in many part of the world.
Comprei um mês do aplicativo para usar junto do vseefave. Porém, não consegui fazer com que o vseeface e motion capture funcione juntos, nesse método mostrado no vídeo, utiliza somente uma webcam?
Several questions: 1. Can’t test sending the data to VseeFace in testing mode right? 2. Could I use face tracking from my iphone, the emotiona from my webcam & your motion capture as the same time?
(found it) if I buy a subscription, for a month? Do I lose my option of exporting it to external apps after a month? in the mean time I'll be reading the FAQ edit. perpetual license $69.80, or if I already payed my subscription I get discounted in the amount of subscriptions fees I already did.
Hey, programs great, my character tracks upper body well in the app. I am having some trouble with sending body tracking to vseeface though. It sends the motions but they don't match what is in your app identically. For instance: the fingers move great in motion capture but in vseeface they will bend the wrong way. Any ideas on what I'm doing wrong?
Very cool app! Already paid for a permanent license. I have a small issue tho. I connected it to the VSF and it seems to track my hands and face well enough considering my poor lighting, however, my body doesn't move at all. Like I can see at least some body movement on the demo model in WMR, but it doesn't translate into VSF at all. Why could this happen? And what can I try to do to fix it?
@@WebcamMotionCapture hm, I also tried to completly uncheck the VSF tracking, but the body stays still. Do you think there is anything else I could try?
@@Shiimosa Is the upper body moving on "Webcam Motion Receiver"? If so, are you loading the same VRM model both on "Webcam Motion Receiver" and "VSeeFace"? You can download the default vrm model from here. hub.vroid.com/en/characters/2287322741607496883/models/1995551907338074831
Solution was that I realized there was a spout option on Webcam Motion , and I used it for OBS so I actually had a good result and dont actually need Vseeface, making it less effort for my pc!!
My expressions are not working even when I have the droidcam...what do I do?? Update: I believe I found the problem, but the app was draining my battery too much. I will not be using this.
Its the second month using your software, the tracking is pretty good. I think ive run into a Model issue, while your capture seems to work fine, my hands are always far from the face, for example. Either my vtube arms length are too high or i don't know. Is there any tutorial that i can follow up to use all it together?
I'm sorry, but we don't currently have a tutorial available. However, if you could send us a screenshot showing the issue, we might be able to offer suggestions to enhance the tracking experience. Our email address is contact@webcammotioncapture.info
So I'm running into a small problem with syncing to Vseeface. Got hands working nice and great, but if my hands are moving after 2 mins, things get choppy till I move my hands again. How can I fix this? Also how can I move the model around on main program. If I could I would like to stream off that, but it cuts off the ears because my model loads to high.
Can you try this and see if it solves the issue? t.co/wRF8t7Fdw8 Do you want to change the position of the model? If so, please use the sliders on the top-left corner of the Webcam Motion Receiver window.
Please adjust "Body Filter" and "Face Filter" - Small value => fast reaction but noisy. - Large value => slow reaction but smooth. "Body Filter" for eyes and "Face Filter" for mouth.
@@WebcamMotionCapture Aight, fixed it :) Thank you. And uhhhh. I there a possible chance to get more variation with macro keys for emotions? I usually have my emotions on CTRL + F1... i just can add "normal" keys ._. :c
Hi, I tried this software with the paid suscription but I can't get it to work with Unreal Engine and the reason is simple: I use a custom character made from scratch, not a vrm model. All the plugins are installed but I don't have a VRM map (I believe it's for the bone mapping), how can I make it work?
Here is the instructions from the plugin's author. github.com/HAL9HARUKU/VMC4UE/wiki It is only in Japanese but we believe you can understand it using DeepL, etc.
Can you send us a video screenshot showing the issue to the following address? We would like to understand your problem in detail. contact@webcammotioncapture.info
@WebcamMotionCapture it'll have to wait till next weekend now. But I will try. Already talking to my friend that made my vrm model about things as he knows far more about this stuff than I. If he happens to figure it out during the week I'll be sure to forward it to you guys in case it ever happens for someone else.
When i try to use my webcam (Elgato FullHD), i only see a black screen but my camera shows a blue light, so the software use it.. sad but it doesn't work for me
Can you try to change the camera resolution? If you are using the Windows version, can you also go to "Preferences" from the Webcam Motion Capture window menu and uncheck "Use DirectShow."?
@@PurplesinnerW For now, on VSeeFace, you can select which part of the body you want to control based on the VMC messages. You can see if other software has an equivalent feature.
Thank you for your feedback! WMC is working on Unity, which consumes GPU resources. When you are sending the tracking data using the VMC protocol, you can reduce the GPU usage by hiding the UIs since it internally stops rendering (You can observe the GPU usage drops on Task Manager). But this does not completely stop Unity from still consuming some GPU resource. So, WMC can potentially slow down if other apps consume almost all GPU resources. Sorry We have not figured out the solution yet for this problem. Yes, we will update the app so that the VMC settings can also be saved as a part of User Settings.
@@WebcamMotionCapture Hey there. I wanted to toss an update that I figured out a solution to all three of my problems (I can run my own exported project in 60 fps fullscreen and use Shadowplay again / play demanding games with max fps in WMC (Normal mode + VMC) by setting the affinity cores of the game I'm playing to 2 cores (but this has to be done for each game / and it can be set permanently on launch. If you don't want to do that for each game; there's a benefit to setting WMC to High / Realtime priority by 5-15fps (Higher avg fps / higher lows) which could be beneficial to include in new builds.
You can use Vroid Studio. vroid.com/en/studio It is free easy-to-use software to create 3D avatars, which does not require any special skills! Export your avatar as vrm file (vroid.pixiv.help/hc/en-us/articles/360014383713-How-to-create-a-VRM-file). Then import it to Webcam Motion Receiver.
The webcam program doesn't let me send anything over to VSeeFace as in this video? I'm missing some of the options that you have in this video. In fact, it's not letting me have BOTH programs open? It's not recognizing my webcam when I have both open? Even following the instructions here.
You need to subscribe to send the tracking data to external apps. The tracking data sent to an external app is exactly the one you see in the trial mode. So, if you like it, please subscribe! You can access your webcam from both the apps simultaneously by either of the following approaches. 1. If you don't mind to use your android phone as a webcam, try DroidCam (play.google.com/store/apps/details?id=com.dev47apps.droidcam&hl=en_US&gl=US). This app is free and we have confirmed that you can access the camera from Webcam Motion Capture and VSeeFace at the same time. 2. Set up a virtual camera. Since multiple apps cannot access the same physical camera at the same time, you need to set up a virtual camera. You can set up a virtual camera on OBS. Unfortunately, the OBS's default built-in virtual camera cannot be accessed from Webcam Motion Capture, so please use this plugin instead (obsproject.com/forum/resources/obs-virtualcam.949/). Once the virtual camera is ready, you can access the camera from Webcam Motion Capture and VSeeFace at the same time.
@@WebcamMotionCapture But it still doesn't have the facial expression that were calibrated in VSeeFace? This method didn't work for me and I don't know where I went wrong. If the Webcam Motion Receiver is what is inputting into VSeeFace, there's no way to toggle it to use VSeeFace facial expression calibration because it's using the receiver. And the virtual camera set up is already using the webcam in OBS as a Capture, so I can't use my webcam as the default setting in VSeeFace anyways.
@@sblook1154 In the VseeFace settings, when you enable "OSC/VMC receiver", you can still mix the tracking data from Webcam Motion Capture with the VSeeFace tracking by enabling "Apply VSeeFace tracking". You may want to ask the VseeFace developer for more details.
hello. on your official site in the faq section it says that I can use epoccam to capture face and hands using iphone. but in webcam motion receiver i only have other options: waidayo, meowface, facemotion3d and ifacialmocap. there is no epoccam. so how do i use this app?
You can select it from "Webcam Motion Capture" window, not "Webcam Motion Receiver". Please press the button with a number one by one until you find the one with EpocCam. (Refer to webcammotioncapture.info/img/webcam.png)
Hello! So I've subscribed and I can kinda get it to work however I'm using an android /webcam A in vseeface, and want to use Webcam B in your software. My issue is that if I open vseeface first webcam B does not appear even though vseeface isn't using it? Do I need to use an android with this product to make it work or what's the situation???
What happen if you open WMC first and use Webcam B, and then start VSeeFace? You may also want to check this FAQ for more information. webcammotioncapture.info/index.php#faq-vseeface
You can test all the tracking features for free. Can you follow the instructions here if it does not work? webcammotioncapture.info/manual.php#how_to_use
@Ms Moon Boo You can try all the tracking features for free. To send tracking data to VSeeFace, you'll need to subscribe. The tracking quality is the same as that of the trial version, so if you're satisfied with it, please consider subscribing.
Ive set it up properly, ip and port match, but when i click to send the data to the computer in VSEEFACE, my VSEEFACE character just stays in a tpose and will not receive any tracking data from webcammotioncapture. How can i fix this?
@@WebcamMotionCapture I was able to figure out the issue. Apparently, my PC's firewall created rules blocking the connection. I did everything right set up wise, but this was the only thing. I had to allow the connections. It helps if you let your computers know they are private connections vs public connections on your wifi. In case anyone else has this issue.
If you have an iPhone/iPad (iOS 13.0 or later), you can use animate your avatar's facial expressions using face tracking! webcammotioncapture.info/manual.php#setup_waidayo
@@SuperDanielJogos Webcam-based face tracking is in our to-do list. Please follow our twitter account at twitter.com/webcammocap We will give an announcement once the feature is ready!
I think this (tonimono.booth.pm/items/3432915) is the one (paid app) but I've never tried it. If you are looking for a way to export the tracking data to a file (fbx, etc.), we will implement the feature in the next release. So, if you can wait for the next 1-2 weeks, it will be ready!
just bought the sub for this but it has a massive issue of the camera being auto open As in the camera display your face. As a vtuber I am not super keen on anyone seeing my face but could see myself making a mistake and doxxing myself is there any way to make it never show your face ? (click once and never see it again not every time you open it having to manually toggle it)
Thank you for your feedback! If you have an option to hide your webcam by default, it it enough for you? If not, can you let us know the specific feature you want to have to solve your issue? We will integrate the feature in the next release.
@@WebcamMotionCapture I want to say, after playing around with the software, I absolutely love it! I personally believe that eye tracking and even face tracking are better than vseeface ! Not only that but if I am correct it actually uses fewer resources than vseeface on my PC! Vseeface uses about 19% of my CPU and 1000mb of memory Webcam motion uses about 15% CPU and 500mb memory so I find it really awesome! Here are my suggestions to make the service even better ! #1 I noticed settings do not save when changed i.e.: I make my character's face super close to the camera when I close the software and re-log face is no longer in that position. is there anyway to create multiple custom presets? I think it would be useful if I had xyz position I could make and save forever on the app and with the click of the button get the same one again and again. #2 is there any way to add the png system to this like vseeface ? where you add png's to your model that's saved in app? #3 the most important When I open the software it shows my face on the "webcam motion capture this REALLY bad as being a vtuber I never want my face to be seen! my worry if I used this on stream and for whatever reason if the software crashes on stream and I restart the software I could accidentally show my face which is a big no no #3 continued - every time I start it auto shows my face I can hide it BUT it does not save this change when I restart:( what I want is it save me hiding it and never ever show my camera again if possible Thank you for reading my criticisms and asks! is there a discord I could join? I would like to follow the future of this software as I think this could be really really good with a few changes :D (thinking about buying the permanent license as well) -Kyoukeu
@@Kyoukeu #1: You can save up to 5 presets including the avatar's position from the "user settings " at the bottom right corner of the window. See the image below. drive.google.com/file/d/1SPE5CYjYCgDgCk7teg5ELCLdpYJabH_3/view?usp=sharing #2: We don't know the feature on VSeeFace. Can you let us know the webpage or video describing the "png system" feature more specifically? #3: We will add the feature in the next release. Please follow our twitter account at twitter.com/webcammocap We will give an announcement every time a new feature is released!
got a beefy computer setup here, but i have a question, how do i reduce the lag on the software? movement looks pretty choppy compared to other vtubers that i see use the app, i even adjusted the body filter properly and still nothing, whats weird is the fps tracker even says im at 60fps but the lag still remains? Is there a way to manually fix that?
This describes our recommended setup. webcammotioncapture.info/index.php#faq-setup Can you also send us a video screenshot of your screen to contact@webcammotioncapture.info ? We will investigate the issue.
This seems pretty interesting, the only thing is that it dosen't seem to track blinking like in vseeface. So the eyes on my model stay open all the time, aside from that it looks good. Any way to fix the blinking?
@@WebcamMotionCapture I see that, but, like I said, my character isn't blinking at all through this software. I did subscribe also. If I just use vseeface, I blink just fine but it's not blinking on webcam motion capture at all. I'm not sure what to do to make my avatar blink on here, ideas?
@@djyumene If you could send us your VRM model and the video screenshot of your webcam window, we can investigate the issue. Our Email: contact@webcammotioncapture.info
If you can send us your avatar at contact@webcammotioncapture.info, we will investigate the issue. We will use your avatar only for the debugging purpose and will not share your avatar with anyone.
Hey! I'm loving WMC so far but I have a problem, whenever I connect with VseeFace I lose all my expressions so I basically can only track hands and open my mouth and blink but i lose all the other things :( is that supposed to happen?
a tiny bit suggestion, is it possible for you to add like optional/multiple "default pose" to the app ?, and it can transition from the default pose to the motion cap smoothly rather than the need to use another 3rd party tools again to add/change pose
You need to take either of the following approaches to use both the apps at the same time. 1. If you don't mind to use your android phone as a webcam, try DroidCam (play.google.com/store/apps/details?id=com.dev47apps.droidcam&hl=en_US&gl=US). This app is free and we have confirmed that you can access the camera from Webcam Motion Capture and VSeeFace at the same time. 2. Set up a virtual camera. Since multiple apps cannot access the same physical camera at the same time, you need to set up a virtual camera. You can set up a virtual camera on OBS. Unfortunately, the OBS's default built-in virtual camera cannot be accessed from Webcam Motion Capture, so please use this plugin instead (obsproject.com/forum/resources/obs-virtualcam.949/). Once the virtual camera is ready, you can access the camera from Webcam Motion Capture and VSeeFace at the same time.
@@WebcamMotionCapture Thanks for the answer. For now this program and that work around are just more points of error. Im gonna keep using my LeapMotion propably
@@abhibhatnagar4066 We are not providing any apis. But if you want to use the tracking data in an external app, you can receive it via the VMC Protocol.
We have tested the following steps and it seems to work. Go to "Add source" -> "Game Capture". Then, select "Webcam Motion Receiver.exe Webcam Motion Receiver" in the dropdown menu.
i downloaded this to give it a try, arms didnt move at all...nvm scratch that my camera was angled too high, buttt it was janky when it worked so might be that i dnt have enough distance for arms to be fully visible...but i will try this again, its probably where im seated is the problem
Thank you for your interest! Yes, the app assumes that you are sitting straight in front of your camera. Please check the recommended setup! webcammotioncapture.info/index.php#faq-setup
Yes, you have to subscribe to send the tracking data to an external app. The tracking quality is the same as the trial one, so please subscribe if you like it.
Hey mate, still enjoying the program. Run into some issues with performance when running higher end games. Vseeface dosnt affect my performance much but when I open WMC and send the data, I lose about 20 frames and vram bottlenecks. Things Im trying - disabling the mesh in WMC, Disable webcam in WMC. Are there any plans for a performance update or a lightweight version that only sends tracking info? I think that would be helpful for some Thanks
@@axxkeepwinning Sorry it seems your CPU is not fast enough to use WMC in real-time. At least 4 cpu cores should be available. Can you try a video input instead of webcam as described here? webcammotioncapture.info/manual.php#video_input If this goes smoothly, the CPU power seems to be the bottleneck.
Do you think you set the IP address and port correctly? If so, the firewall on your computer may be blocking VSeeFace from receiving messages from an external app. Search for "firewall" inside www.vseeface.icu/
I LIKE IT!! But when I try mine is not smooth like yours is that because I'm in free trial? And my hand sometimes bugged. Will it smooth like you when I send data to VSEEFACE
Please check the recommended setup on the webpage. webcammotioncapture.info/index.php#faq-setup The hand tracking quality in the trial is the same as the one in the subscription plan. It is also same when you send the data to VSeeFace.
@@whatdafishh Can you try using a video as an input as described here? webcammotioncapture.info/manual.php#video_input In this way, you can see how WMC works even if your computer is not fast enough to perform smooth real-time tracking.
@@WebcamMotionCapture thanks for your suggest but I use it to live so I need to capture real-time movement. I think not that smooth is still ok thanks for making this app :) .
Yes. More specifically, once you paid, you can login to the app for the next 30 days even if you unsubscribe immediately. Please see "Q: What if I cancel my subscription in the middle of my billing cycle?" at webcammotioncapture.info/index.php#faq
Hello, I'm having issues with the program. It's not sending to VSeeFace. I have updated both programs. Any ideas? I have tried your program by itself, but the framerate is a bit high and has affected my videogame when I use it. The transparent background is not transparent either.
One of our users made a great tutorial. Please watch this for the VSeeFace issue. th-cam.com/video/983QawjOyhc/w-d-xo.html For the frame rate, sorry we cannot do anything for now. The transparent background works when you use "Game Capture" in the OBS scene and enable "Allow Transparency".
Don't worry. There is no virus in the app. If your anti-malware software reports there is a virus, it is false positive. In that case, you may have to exclude Webcam Motion Capture as an exception in your anti-malware software. webcammotioncapture.info/#faq-cannot-open
found this ad.Your software is my first subscription paid application, kudos to your development team.
Thanks! Enjoy😄
Note to others who may need it:
you cannot use this, Waidayo phone face tracking and Vseeface at the same time. Its one of the other
You can use all the apps at the same time by either of the following approaches.
1. If you don't mind to use your android phone as a webcam, try DroidCam (play.google.com/store/apps/details?id=com.dev47apps.droidcam&hl=en_US&gl=US). This app is free and we have confirmed that you can access the camera from Webcam Motion Capture and VSeeFace at the same time.
2. Set up a virtual camera. Since multiple apps cannot access the same physical camera at the same time, you need to set up a virtual camera. You can set up a virtual camera on OBS. Unfortunately, the OBS's default built-in virtual camera cannot be accessed from Webcam Motion Capture, so please use this plugin instead (obsproject.com/forum/resources/obs-virtualcam.949/). Once the virtual camera is ready, you can access the camera from Webcam Motion Capture and VSeeFace at the same time.
HELP WHEN MY CAMERA LIGHT WENT ON IT SCARED ME 😭😭
Can you describe your problem more specifically? We will work on it.
this is looking very good!
i am hoping to find a tool for developers to capture the motion directly in Unity and apply the tracking data to a 3d or live2d model.
Do you have any plans to release such a SDK?
You can receive the tracking data sent using the VMC protocol on Unity using this plugin.
github.com/gpsnmeajp/EasyVirtualMotionCaptureForUnity
@@WebcamMotionCapture thank you for the recommendation! i've watched a video of someone using this and it seems like there's a need to run a separate VRM software for it to work. I am hoping to find a plugin for Unity that enables everything to be done within Unity itself..
I'll still go and give EVMC4U a try! perhaps i missed out something
@Cobapedia You may try this. github.com/HAL9HARUKU/VMC4UE
Yeah gave it a shot and it really struggled when I had both hands up it couldn't keep up both the lip sync and hand tracking. It also only really operates in a "sweet spot" about six inches to 12 inches in front of my body and about an 18 inch by 18 inch box, anything closer or further and it just drops tracking. The fact that it can only automatically handle 2 of the 5 expressions that vseeface can is a pretty big negative too and its detection was not great either with very limited settings to control it besides manual controls. The finger tracking is SUPERB, the absolute best I've seen, but everything else struggles. If your hands get too close to each other or too close to your mouth the whole thing just freaks out and doesn't know how to handle it. It's not BAD but it's not something I'd pay the SEVENTY DOLLAR pricetag for. Which is only a bit less than the going rate for a used Leap Motion anyway. If it improves, like REALLY improves to be able to handle these things better especially when both hands are closer together or outside that VERY narrow sweet spot, support the full range of expressions, improve the lip sync settings, and catches up a bit more with VSeeFace's facial detection then it might be worth that hefty pricetag but right now the "expensive devices" it claims to let you operate without might be the better option.
Please let us correct that the concept of a "sweet spot" doesn't apply here. As long as your hand remains visible in the camera, it should be consistently tracked.
For an even better tracking experience, please refer to our recommended setup.
webcammotioncapture.info/index.php#faq-setup
@@WebcamMotionCapture Unfortunately that was my personal experience with the application. It really only functioned in a very small "sweet spot" though from what I see listed I had the recommended setup. I could see my hands in the little camera view box but it was still struggling badly to maintain tracking and only functioned about six inches to 12 inches in front of my body and about an 18 inch by 18 inch box. I intend to test further in the future but that is what I experienced to a T.
This is amazing! subbed and testing it out now.
Please make full tutorial .. how to use vseeface with wmc or how to setup wmc
Cooki Kunai has made an excellent tutorial for everyone. Please watch this!
th-cam.com/video/983QawjOyhc/w-d-xo.html&ab_channel=CookiKunai
W00aa! Fantastic!! Thank you for this update!
Not sure if anyone else has tried it, but this program also works as a hand tracker for VUP. Same setup as the video here. Webcam Motion capture has been pretty great at being an alternative to leapmotion, but I do have one issue people have pointed out. When casting tracking through VSeeface, usually when testing female models, all sense of bounciness in the body goes away. Hair works fine, but body geometry seems locked to static pose. Will this be incorporated later?
That's exactly what I'm about to try! I just want hand data though, not sure if it works for just that. I like VUP's body and head motion
@@lithmariel I do think it was only hand motion, but I'd have to try it again.
@@SpartanFlashSentry Tested the new version, it works quite well! Body rotation is a bit janky but head/hand tracking is super smooth!!
I agree! I hope they allow for bounciness soon :(
@@MixieMoon I found a workaround for that recently. Shoot me a dm on Twitter and I can walk you through it.
the music is epic. I like it, also the motion is very smooth. I will try it.
Thanks!!
Awesome! | I don't know if this is possible but I'll put it out in the universe!~ It would be cool to have an option to track the arms and hands only (much like with leap motions)
Sure. I try to add an option to send the arms and hands only. Or, if you are using VSeeFace, you have an option on VSeeFace to receive only the arms and hand tracking.
@@WebcamMotionCapture Yes please! Was this added yet? That's exactly what I want, it'd be perfect!
@@lithmariel Sorry not ready yet. We try to add the feature in the next release.
@@WebcamMotionCapture Awesome! This works great so far, thanks so much for all the hard work!
@@lithmariel You can save the GPU usage by hiding the UIs. But sorry, for the CPU usage, there is no quick-and-easy method to reduce it.
I just downloaded Webcam Motion Capture, but the "normal and Send to external app" is not there. Is it only avaible with subscription?? (PC Version 1.6.0)
Sorry you need to subscribe to send out the tracking data using the VMC protocol. The tracking quality itself is exactly the same as the trial one.
Yeah, so sad.
Make sure you have Face Tracking (its in red) unchecked.
ca you do more detailed videos on how to output the tracking data to other apps?
Can you follow this great tutorial from one of our users?
th-cam.com/video/983QawjOyhc/w-d-xo.htmlsi=uuIhcRmp2C_1fT36&t=554
This is so cool
I subscribed i love u and thank you 😻😻
If the pricing can go down to 30$ for the one time payment, a lot more people will come running for this. In today's inflated world so many people need to save much more on their financial spending so they are also looking for alternatives to tech and software to not break their bank and not struggle to pay basic home and food necessities. You could easily make much more in profit by lowering the pricing considering how much more people would fly over to this software. Shoot, if you lower it I'll rage and tweet and support this in my streams. I'm a vtuber avatar creator, this kind of software should be easier to obtain to be honest, it'll do good both for you and the community.
Please use our subscription plan. It is just $1.99/month.
webcammotioncapture.info/#subscribe
We keep the price as low as possible so that the it is affordable in many part of the world.
Question: What is the benefit of controlling from two programs?
Thanks so much
Very Nice Tool.
I use I facial mocap on vsee face. How would I go about doing this. Does that mean I have to buy a camera
Comprei um mês do aplicativo para usar junto do vseefave.
Porém, não consegui fazer com que o vseeface e motion capture funcione juntos, nesse método mostrado no vídeo, utiliza somente uma webcam?
Yes. You may refer to this page.
webcammotioncapture.info/#faq-vseeface
Several questions:
1. Can’t test sending the data to VseeFace in testing mode right?
2. Could I use face tracking from my iphone, the emotiona from my webcam & your motion capture as the same time?
1. It is correct. You need to subscribe to use the feature.
2. Yes. You can try it in the trial mode to see if it is what you are looking for.
(found it) if I buy a subscription, for a month? Do I lose my option of exporting it to external apps after a month? in the mean time I'll be reading the FAQ edit. perpetual license $69.80, or if I already payed my subscription I get discounted in the amount of subscriptions fees I already did.
how do i fix my eyes? they're stuck facing away from each other
Can you send us a video capture showing the issue? We would like to understand your problem in detail.
contact@webcammotioncapture.info
Have problems with Game Capture Card from Elgato as Cam. Not work. With Cam Link from Elgato its work
Thank you for the info!
This may be helpful to solve your problem.
webcammotioncapture.info/#faq-webcam
Hey, programs great, my character tracks upper body well in the app. I am having some trouble with sending body tracking to vseeface though. It sends the motions but they don't match what is in your app identically. For instance: the fingers move great in motion capture but in vseeface they will bend the wrong way. Any ideas on what I'm doing wrong?
I didn't have the same exports loaded in each application. Slightly different limbs on each model. Fixed. oops.
@@Lord_Tucks Great! Enjoy!
so cool
can you use it for vr?
Very cool app! Already paid for a permanent license. I have a small issue tho. I connected it to the VSF and it seems to track my hands and face well enough considering my poor lighting, however, my body doesn't move at all. Like I can see at least some body movement on the demo model in WMR, but it doesn't translate into VSF at all. Why could this happen? And what can I try to do to fix it?
My guess is you need to uncheck "Track spine and chest" under "Apply VSeeFace Tracking" on VSeeFace.
@@WebcamMotionCapture hm, I also tried to completly uncheck the VSF tracking, but the body stays still. Do you think there is anything else I could try?
@@Shiimosa Is the upper body moving on "Webcam Motion Receiver"? If so, are you loading the same VRM model both on "Webcam Motion Receiver" and "VSeeFace"? You can download the default vrm model from here. hub.vroid.com/en/characters/2287322741607496883/models/1995551907338074831
@@WebcamMotionCapture Loading the same VRM model on both apps fixed it for me. Thanks a ton!
@@WebcamMotionCapture I tried this and it did not work :(
For some reason when I moved to Vsee it tracks my body, but not my facetracking.... even tho it works on Webcam Motion
Solution was that I realized there was a spout option on Webcam Motion , and I used it for OBS so I actually had a good result and dont actually need Vseeface, making it less effort for my pc!!
@@AsukaAkuma-666 Good to hear you solved your problem. Enjoy!
My expressions are not working even when I have the droidcam...what do I do??
Update: I believe I found the problem, but the app was draining my battery too much. I will not be using this.
Is this possible to use together with ARKit? So I can have smooth face tracking with the ARKit/iPhone and hand tracking with this software?
Yes. Please see the following pages for details.
webcammotioncapture.info/manual.php#calibration
webcammotioncapture.info/manual.php#setup_waidayo
i bought it and it works good,but its a bit laggy,can someone help me with set some settings for make it more smooth?
Here is our recommended setup.
webcammotioncapture.info/index.php#faq-setup
Can i save FACE motion capture data to fbx file? like the shapekeys expressions captured by meowface app for example?
Yes, you can!
@@WebcamMotionCapture NICE! this is one the best apps I've seen in a long time!
im having an issue where on the web one works find but when I use vseeface my avatar is super jumpy and just shakes
Are you loading the same avatar both in VSeeFace and Webcam Motion Capture?
eyes do not blink. I have the full version. but this video is blinking.
Its the second month using your software, the tracking is pretty good.
I think ive run into a Model issue, while your capture seems to work fine, my hands are always far from the face, for example. Either my vtube arms length are too high or i don't know. Is there any tutorial that i can follow up to use all it together?
I'm sorry, but we don't currently have a tutorial available. However, if you could send us a screenshot showing the issue, we might be able to offer suggestions to enhance the tracking experience.
Our email address is contact@webcammotioncapture.info
How do I connect this proggrame to VtuberPlus? So that I can still use all my point rewards/avatar interactions.
This video may be helpful.
th-cam.com/video/5zuC_XkWw_M/w-d-xo.html&ab_channel=gumipedro
does iriun camera work?
You can try the app for free. So, please check if it works in your environment.
webcammotioncapture.info/index.php#download
when i start vSeeface and make eveything like in the video it doesnt work for me
You may also want to check this one of the best user's tutorials.
th-cam.com/video/983QawjOyhc/w-d-xo.htmlsi=oDJ_J-Hqt2WjvmSd&t=534
So I'm running into a small problem with syncing to Vseeface. Got hands working nice and great, but if my hands are moving after 2 mins, things get choppy till I move my hands again. How can I fix this? Also how can I move the model around on main program. If I could I would like to stream off that, but it cuts off the ears because my model loads to high.
Can you try this and see if it solves the issue?
t.co/wRF8t7Fdw8
Do you want to change the position of the model? If so, please use the sliders on the top-left corner of the Webcam Motion Receiver window.
I thought that was for her head not body. thank you love. @@WebcamMotionCapture
My pc is running with maxium 80% gpu and this lags when I open a game.
Hey hey :) I bought it right know but my eyes and my mouth are not working with 60 fps. What should i do ? :/
Please adjust "Body Filter" and "Face Filter"
- Small value => fast reaction but noisy.
- Large value => slow reaction but smooth.
"Body Filter" for eyes and "Face Filter" for mouth.
@@WebcamMotionCapture Aight, fixed it :) Thank you. And uhhhh. I there a possible chance to get more variation with macro keys for emotions? I usually have my emotions on CTRL + F1... i just can add "normal" keys ._. :c
if I buy the permanent lisense, can I use it offline without internet connection?
Sorry the internet connection is always required.
Hi, I tried this software with the paid suscription but I can't get it to work with Unreal Engine and the reason is simple: I use a custom character made from scratch, not a vrm model. All the plugins are installed but I don't have a VRM map (I believe it's for the bone mapping), how can I make it work?
Here is the instructions from the plugin's author.
github.com/HAL9HARUKU/VMC4UE/wiki
It is only in Japanese but we believe you can understand it using DeepL, etc.
ive subscribed. but hand tracking keeps my models mouth from moving when i talk. is this a common issue?
Can you send us a video screenshot showing the issue to the following address?
We would like to understand your problem in detail.
contact@webcammotioncapture.info
@WebcamMotionCapture it'll have to wait till next weekend now. But I will try. Already talking to my friend that made my vrm model about things as he knows far more about this stuff than I. If he happens to figure it out during the week I'll be sure to forward it to you guys in case it ever happens for someone else.
When i try to use my webcam (Elgato FullHD), i only see a black screen but my camera shows a blue light, so the software use it.. sad but it doesn't work for me
Can you try to change the camera resolution?
If you are using the Windows version, can you also go to "Preferences" from the Webcam Motion Capture window menu and uncheck "Use DirectShow."?
I really just need the arms tracking UmU maybe in next releases
Do you want to use the arms tracking in an external app or inside Webcam Motion Capture?
@@WebcamMotionCapture external app. QmQ
@@PurplesinnerW For now, on VSeeFace, you can select which part of the body you want to control based on the VMC messages. You can see if other software has an equivalent feature.
Do you think we could get an 'always on top' option for the webcam window? Its much easier to stay in frame when I can see the window
Sorry we don't have such a feature. Does this help?
www.groovypost.com/howto/howto/windows-programs-always-on-top/
@@WebcamMotionCapture Great customer service btw
Edit: Fixed my performance issues (read reply posts)
Thank you for your feedback!
WMC is working on Unity, which consumes GPU resources. When you are sending the tracking data using the VMC protocol, you can reduce the GPU usage by hiding the UIs since it internally stops rendering (You can observe the GPU usage drops on Task Manager). But this does not completely stop Unity from still consuming some GPU resource. So, WMC can potentially slow down if other apps consume almost all GPU resources. Sorry We have not figured out the solution yet for this problem.
Yes, we will update the app so that the VMC settings can also be saved as a part of User Settings.
@@WebcamMotionCapture Hey there. I wanted to toss an update that I figured out a solution to all three of my problems (I can run my own exported project in 60 fps fullscreen and use Shadowplay again / play demanding games with max fps in WMC (Normal mode + VMC) by setting the affinity cores of the game I'm playing to 2 cores (but this has to be done for each game / and it can be set permanently on launch. If you don't want to do that for each game; there's a benefit to setting WMC to High / Realtime priority by 5-15fps (Higher avg fps / higher lows) which could be beneficial to include in new builds.
@@tybost Thank you for sharing the info!
Hand tracking works beautifully, just don't try to do it will talking. The machine gets very confused
Hello, tengo un problema y es que cuando pongo el avatar y eso empieza a hacer cosas raras, los puntos de captura van fatal
Can you send us a video screenshot showing your problem? Our email address is contact@webcammotioncapture.info
We will investigate the issue.
only face can tracking ive try to set all bone tracking
it won't let me open
it says python39.dll could not be found
said file *is* in the right folder when i checked
Are you running the app on Windows 10 or 11? The app does not run on Windows 7.
@@WebcamMotionCapture ah that was the problem, I'm on windows 7
Can't use it am afraid but still looks like an interesting app
i have vseeface but cant find VMC protocol to DL , any DL link would be appriciated :D
How do you create a custom character?
You can use Vroid Studio.
vroid.com/en/studio
It is free easy-to-use software to create 3D avatars, which does not require any special skills!
Export your avatar as vrm file (vroid.pixiv.help/hc/en-us/articles/360014383713-How-to-create-a-VRM-file). Then import it to Webcam Motion Receiver.
The webcam program doesn't let me send anything over to VSeeFace as in this video?
I'm missing some of the options that you have in this video.
In fact, it's not letting me have BOTH programs open? It's not recognizing my webcam when I have both open? Even following the instructions here.
You need to subscribe to send the tracking data to external apps. The tracking data sent to an external app is exactly the one you see in the trial mode. So, if you like it, please subscribe!
You can access your webcam from both the apps simultaneously by either of the following approaches.
1. If you don't mind to use your android phone as a webcam, try DroidCam (play.google.com/store/apps/details?id=com.dev47apps.droidcam&hl=en_US&gl=US). This app is free and we have confirmed that you can access the camera from Webcam Motion Capture and VSeeFace at the same time.
2. Set up a virtual camera. Since multiple apps cannot access the same physical camera at the same time, you need to set up a virtual camera. You can set up a virtual camera on OBS. Unfortunately, the OBS's default built-in virtual camera cannot be accessed from Webcam Motion Capture, so please use this plugin instead (obsproject.com/forum/resources/obs-virtualcam.949/). Once the virtual camera is ready, you can access the camera from Webcam Motion Capture and VSeeFace at the same time.
@@WebcamMotionCapture But it still doesn't have the facial expression that were calibrated in VSeeFace? This method didn't work for me and I don't know where I went wrong. If the Webcam Motion Receiver is what is inputting into VSeeFace, there's no way to toggle it to use VSeeFace facial expression calibration because it's using the receiver. And the virtual camera set up is already using the webcam in OBS as a Capture, so I can't use my webcam as the default setting in VSeeFace anyways.
@@sblook1154 In the VseeFace settings, when you enable "OSC/VMC receiver", you can still mix the tracking data from Webcam Motion Capture with the VSeeFace tracking by enabling "Apply VSeeFace tracking". You may want to ask the VseeFace developer for more details.
I have phone camera and Pc how i do i have app irunium but it dont read good help me
What is irunium?
@@WebcamMotionCapture its a webcam phone to PC application
@@kami_edits3Can you send us the link to the app? We cannot find it online..
hello. on your official site in the faq section it says that I can use epoccam to capture face and hands using iphone. but in webcam motion receiver i only have other options: waidayo, meowface, facemotion3d and ifacialmocap. there is no epoccam. so how do i use this app?
You can select it from "Webcam Motion Capture" window, not "Webcam Motion Receiver".
Please press the button with a number one by one until you find the one with EpocCam. (Refer to webcammotioncapture.info/img/webcam.png)
Does this affect in the performance?
It depends on your environment.
Hello! So I've subscribed and I can kinda get it to work however I'm using an android /webcam A in vseeface, and want to use Webcam B in your software. My issue is that if I open vseeface first webcam B does not appear even though vseeface isn't using it? Do I need to use an android with this product to make it work or what's the situation???
What happen if you open WMC first and use Webcam B, and then start VSeeFace?
You may also want to check this FAQ for more information.
webcammotioncapture.info/index.php#faq-vseeface
The trail version wont let u test if it even works on the machine....they do nothing but play loop animation
You can test all the tracking features for free.
Can you follow the instructions here if it does not work?
webcammotioncapture.info/manual.php#how_to_use
@@WebcamMotionCapture so sweet, thanks for answering, it was my dumb brain that didnt set up the camera, it works flawless, thanks for sharing
@Ms Moon Boo You can try all the tracking features for free. To send tracking data to VSeeFace, you'll need to subscribe. The tracking quality is the same as that of the trial version, so if you're satisfied with it, please consider subscribing.
@Ms Moon Boo Please check our recommended setup for better tracking.
webcammotioncapture.info/#faq-setup
Too expensive permanent license(
Our subscription plan is just $1.99/month and you can stop anytime!
webcammotioncapture.info/index.php#subscribe
I have a Leap motion, but I feel its not perfect all the time. Can you use both Leap Motion and WMC at the same time?
For now, we don't have a plan to support Leap Motion.
How do you do that?
How can I download Aさん avatar in vseeface?
You can download the avatar from here.
hub.vroid.com/en/characters/2287322741607496883/models/1995551907338074831
do both programs have to be open for it to work? or is it ok to just leave vseeface open?
Yes.
Ive set it up properly, ip and port match, but when i click to send the data to the computer in VSEEFACE, my VSEEFACE character just stays in a tpose and will not receive any tracking data from webcammotioncapture. How can i fix this?
One of our users made a great tutorial. Please check this out.
th-cam.com/video/983QawjOyhc/w-d-xo.html
@@WebcamMotionCapture I was able to figure out the issue. Apparently, my PC's firewall created rules blocking the connection. I did everything right set up wise, but this was the only thing. I had to allow the connections. It helps if you let your computers know they are private connections vs public connections on your wifi. In case anyone else has this issue.
@@NyoMoNyom Good to hear that it works. Thank you for your feedback!
@@WebcamMotionCapture of course!! Thank you for the speedy replies ❤️
can we use non-keyed expressions with it? like... just use our face to make the expressions or we need to use the keys as the most vtubing programs?
If you have an iPhone/iPad (iOS 13.0 or later), you can use animate your avatar's facial expressions using face tracking!
webcammotioncapture.info/manual.php#setup_waidayo
@@WebcamMotionCapture I don't have an iPhone
@@SuperDanielJogos Webcam-based face tracking is in our to-do list. Please follow our twitter account at twitter.com/webcammocap
We will give an announcement once the feature is ready!
@@WebcamMotionCapture if you guys do it, I will buy it I the second I see that's ready
Can it is use for blender also? Any addon for blender?
I think this (tonimono.booth.pm/items/3432915) is the one (paid app) but I've never tried it.
If you are looking for a way to export the tracking data to a file (fbx, etc.), we will implement the feature in the next release. So, if you can wait for the next 1-2 weeks, it will be ready!
just bought the sub for this but it has a massive issue of the camera being auto open As in the camera display your face. As a vtuber I am not super keen on anyone seeing my face but could see myself making a mistake and doxxing myself is there any way to make it never show your face ? (click once and never see it again not every time you open it having to manually toggle it)
Thank you for your feedback!
If you have an option to hide your webcam by default, it it enough for you? If not, can you let us know the specific feature you want to have to solve your issue?
We will integrate the feature in the next release.
@@WebcamMotionCapture
I want to say, after playing around with the software, I absolutely love it! I personally believe that eye tracking and even face tracking are better than vseeface ! Not only that but if I am correct it actually uses fewer resources than vseeface on my PC!
Vseeface uses about 19% of my CPU and 1000mb of memory
Webcam motion uses about 15% CPU and 500mb memory so I find it really awesome!
Here are my suggestions to make the service even better !
#1 I noticed settings do not save when changed i.e.: I make my character's face super close to the camera when I close the software and re-log face is no longer in that position. is there anyway to create multiple custom presets? I think it would be useful if I had xyz position I could make and save forever on the app and with the click of the button get the same one again and again.
#2 is there any way to add the png system to this like vseeface ? where you add png's to your model that's saved in app?
#3 the most important When I open the software it shows my face on the "webcam motion capture this REALLY bad as being a vtuber I never want my face to be seen! my worry if I used this on stream and for whatever reason if the software crashes on stream and I restart the software I could accidentally show my face which is a big no no
#3 continued - every time I start it auto shows my face I can hide it BUT it does not save this change when I restart:( what I want is it save me hiding it and never ever show my camera again if possible
Thank you for reading my criticisms and asks! is there a discord I could join? I would like to follow the future of this software as I think this could be really really good with a few changes :D (thinking about buying the permanent license as well)
-Kyoukeu
@@Kyoukeu
#1: You can save up to 5 presets including the avatar's position from the "user settings " at the bottom right corner of the window. See the image below.
drive.google.com/file/d/1SPE5CYjYCgDgCk7teg5ELCLdpYJabH_3/view?usp=sharing
#2: We don't know the feature on VSeeFace. Can you let us know the webpage or video describing the "png system" feature more specifically?
#3: We will add the feature in the next release.
Please follow our twitter account at twitter.com/webcammocap
We will give an announcement every time a new feature is released!
@@WebcamMotionCapture thanks for the response! I will go follow the twitter. When I have time I will make a quick video showing the png system
@@Kyoukeu OK, thank you!
got a beefy computer setup here, but i have a question, how do i reduce the lag on the software? movement looks pretty choppy compared to other vtubers that i see use the app, i even adjusted the body filter properly and still nothing, whats weird is the fps tracker even says im at 60fps but the lag still remains? Is there a way to manually
fix that?
This describes our recommended setup.
webcammotioncapture.info/index.php#faq-setup
Can you also send us a video screenshot of your screen to contact@webcammotioncapture.info ? We will investigate the issue.
This seems pretty interesting, the only thing is that it dosen't seem to track blinking like in vseeface. So the eyes on my model stay open all the time, aside from that it looks good. Any way to fix the blinking?
Blinking is supported by default as shown here
th-cam.com/video/2uOk_0_UhIs/w-d-xo.html.
@@WebcamMotionCapture I see that, but, like I said, my character isn't blinking at all through this software. I did subscribe also.
If I just use vseeface, I blink just fine but it's not blinking on webcam motion capture at all.
I'm not sure what to do to make my avatar blink on here, ideas?
@@djyumene If you could send us your VRM model and the video screenshot of your webcam window, we can investigate the issue.
Our Email: contact@webcammotioncapture.info
I have a problem that my avatar dont move, but my comment is every time away
If you can send us your avatar at contact@webcammotioncapture.info, we will investigate the issue. We will use your avatar only for the debugging purpose and will not share your avatar with anyone.
camera didnt even turn on when i tried
Sorry for the inconvenience.
Can you send us a screenshot of the issue you are encountering to contact@webcammotioncapture.info ?
Hey! I'm loving WMC so far but I have a problem, whenever I connect with VseeFace I lose all my expressions so I basically can only track hands and open my mouth and blink but i lose all the other things :( is that supposed to happen?
Maybe the problem is you cannot access the same webcam from both the apps at the same time.
Can you see this?
webcammotioncapture.info/#faq-vseeface
a tiny bit suggestion, is it possible for you to add like optional/multiple "default pose" to the app ?, and it can transition from the default pose to the motion cap smoothly rather than the need to use another 3rd party tools again to add/change pose
Do you mean you want to set an arbitrary initial pose instead of the current T-pose?
@@WebcamMotionCapture yes exactly !, the default tpose IF hand is not detected by the cam
@@yttrium6575 OK, we will think of it. Thank you for your feedback!
Soo but i cant use my veseeface expression detection?
You need to take either of the following approaches to use both the apps at the same time.
1. If you don't mind to use your android phone as a webcam, try DroidCam (play.google.com/store/apps/details?id=com.dev47apps.droidcam&hl=en_US&gl=US). This app is free and we have confirmed that you can access the camera from Webcam Motion Capture and VSeeFace at the same time.
2. Set up a virtual camera. Since multiple apps cannot access the same physical camera at the same time, you need to set up a virtual camera. You can set up a virtual camera on OBS. Unfortunately, the OBS's default built-in virtual camera cannot be accessed from Webcam Motion Capture, so please use this plugin instead (obsproject.com/forum/resources/obs-virtualcam.949/). Once the virtual camera is ready, you can access the camera from Webcam Motion Capture and VSeeFace at the same time.
@@WebcamMotionCapture Thanks for the answer. For now this program and that work around are just more points of error. Im gonna keep using my LeapMotion propably
I am interested in the subscription of this, can u brief me about its api ??
This is our official website.
webcammotioncapture.info/
@@WebcamMotionCapture It does not mention anything relating to its api. Please tell me about that
@@abhibhatnagar4066 We are not providing any apis. But if you want to use the tracking data in an external app, you can receive it via the VMC Protocol.
Please help me how to use on tiktok studio ? 😢
We have tested the following steps and it seems to work.
Go to "Add source" -> "Game Capture". Then, select "Webcam Motion Receiver.exe Webcam Motion Receiver" in the dropdown menu.
i downloaded this to give it a try, arms didnt move at all...nvm scratch that my camera was angled too high, buttt it was janky when it worked so might be that i dnt have enough distance for arms to be fully visible...but i will try this again, its probably where im seated is the problem
Thank you for your interest!
Yes, the app assumes that you are sitting straight in front of your camera.
Please check the recommended setup!
webcammotioncapture.info/index.php#faq-setup
i got a real question, why would one person want to send the webcam motion capture tracking to VSeeFace, don't the two programs do the same?
One of the reasons is some users want to use VSFAvatar (www.vseeface.icu/#vsfavatar) which is not supported by Webcam Motion Capture natively.
This is awesome! But I just downloaded and I don't see the "Send to external app" button, is this no longer available? Or it's just for subscription?
Yes, you have to subscribe to send the tracking data to an external app. The tracking quality is the same as the trial one, so please subscribe if you like it.
webcam motion capture are not download on my laptop i don't know why that's bad for me can anyone help me for this
Hey mate, still enjoying the program. Run into some issues with performance when running higher end games. Vseeface dosnt affect my performance much but when I open WMC and send the data, I lose about 20 frames and vram bottlenecks. Things Im trying - disabling the mesh in WMC, Disable webcam in WMC.
Are there any plans for a performance update or a lightweight version that only sends tracking info? I think that would be helpful for some
Thanks
Running WMC and VSeeFace in parallel consumes lots of GPU resources. Can you let us know if you have any specific reason to use VSeeFace?
Is there anyway to stop my webcam from lagging?
Can you let us know the CPU and GPU on your computer?
@@WebcamMotionCapture My CPU is an Intel Core i3-8145U and my GPU is an Intel UHD Graphics 620
@@axxkeepwinning Sorry it seems your CPU is not fast enough to use WMC in real-time. At least 4 cpu cores should be available.
Can you try a video input instead of webcam as described here?
webcammotioncapture.info/manual.php#video_input
If this goes smoothly, the CPU power seems to be the bottleneck.
Already paid for permanent and followed everything but doesnt work on vseeface at all. I domt know what to do....
Do you think you set the IP address and port correctly? If so, the firewall on your computer may be blocking VSeeFace from receiving messages from an external app.
Search for "firewall" inside www.vseeface.icu/
I emailed u. Could u check plz?
Can i use only WMC? Or i need vseeface too?
Yes. You don't need VSeeFace.
@@WebcamMotionCapture thank youu
how i can end my suscription?
You can cancel your subscription from here.
webcammotioncapture.info/user.php#subscribe
Can you add a way for the 'send to external app' to be enabled on the free version? (like watching an ad, completing a survey, etc)?
The tracking data sent to an external app is exactly the one you see in the free trial mode. So, if you like it, please subscribe!
@@WebcamMotionCapture
No, there isn't???
Like, I'm looking at it atm & literally, there is no option for that
@@WebcamMotionCapture The options at the top to switch between normal and external app are not available to free users.
Is there a free one that you can use?
You can try all the tracking features for free!
webcammotioncapture.info/index.php#download
Will there be a just one payment option for future releases?
Yes, there is a a one-time payment option.
webcammotioncapture.info/onetime_payment.php
@@WebcamMotionCapture 70$ is waaaay out of my pocket. Thank you so much anyway. I will try to get the monthly one 💖
i bought the whole package, but i can't seem to connect IP adresses together, any help?
Can you describe what you want to do more specifically? Do you want to run WMC as-is or send the tracking data to an external app such as VSeeFace?
@@WebcamMotionCapture i want to send it to vseeface but on another PC, is that possible or not? might be too much
@@tristan3177 Yes, you can do it by specifying the other computer's IP address.
@@WebcamMotionCapture Okay thank you for replying, I just tried and it kept saying invalid IP address
@@tristan3177 Does your IP address consist of only digits and period? If it contains other symbols, it is invalid.
it would be great if there was you know, maybe wasnt a pay wall
I LIKE IT!! But when I try mine is not smooth like yours is that because I'm in free trial? And my hand sometimes bugged. Will it smooth like you when I send data to VSEEFACE
Please check the recommended setup on the webpage.
webcammotioncapture.info/index.php#faq-setup
The hand tracking quality in the trial is the same as the one in the subscription plan. It is also same when you send the data to VSeeFace.
@@WebcamMotionCapture thankksss for replying lmao my computer is more noob than I expected.Anyway thanks
@@whatdafishh Can you try using a video as an input as described here?
webcammotioncapture.info/manual.php#video_input
In this way, you can see how WMC works even if your computer is not fast enough to perform smooth real-time tracking.
@@WebcamMotionCapture thanks for your suggest but I use it to live so I need to capture real-time movement. I think not that smooth is still ok thanks for making this app :) .
If i unsubscibe will i still be able to send data to external apps durning month?
Yes. More specifically, once you paid, you can login to the app for the next 30 days even if you unsubscribe immediately.
Please see "Q: What if I cancel my subscription in the middle of my billing cycle?" at webcammotioncapture.info/index.php#faq
Thanks for the answer!
can i download for free without payment?
Yes, you can try all the tracking features for free!
@@WebcamMotionCapture never mind
Hello, I'm having issues with the program. It's not sending to VSeeFace. I have updated both programs. Any ideas? I have tried your program by itself, but the framerate is a bit high and has affected my videogame when I use it. The transparent background is not transparent either.
One of our users made a great tutorial. Please watch this for the VSeeFace issue.
th-cam.com/video/983QawjOyhc/w-d-xo.html
For the frame rate, sorry we cannot do anything for now.
The transparent background works when you use "Game Capture" in the OBS scene and enable "Allow Transparency".
I wanted to delete this (my computer memory) and I had a problem because it had virus
Don't worry. There is no virus in the app.
If your anti-malware software reports there is a virus, it is false positive. In that case, you may have to exclude Webcam Motion Capture as an exception in your anti-malware software.
webcammotioncapture.info/#faq-cannot-open