LG NEXUS 5X BOOTLOOP FIX 2020 | I FIXED IT WITH MY UNPROFESSIONAL HANDS

แชร์
ฝัง
  • เผยแพร่เมื่อ 6 ต.ค. 2024
  • It was running fine and i made a review video 3 weeks back but after posting the video the very next day i was scrolling the contacts and my phone got freeze for few seconds then it turned off and google boot loop started i tried to fix this issue with modified rom i heard that rom disable some cores it would reduce the performance but phone will work fine but that didn't worked then i saw a video of a person putting some heat on the back of the phone with the hair dryer and his phone turn on for few minutes that step is good for doing backup but long lasting fix is possible by putting some heat and solding solution to the processor which i did in this video you can follow the same steps but be careful while removing the connector strip of battery screen etc don't use blade to open them it will damage the ribbon i didn't know that time but luckily no damage happen with my phone in the process I made this video three days back and its still working fine.
    I will post in the comments if it will start this issue again.
    Hope it will help.
    Please don't forget to subscribe
    THANK YOU

ความคิดเห็น • 87

  • @CelloGraph
    @CelloGraph  5 ปีที่แล้ว +9

    Required things
    Cutter, Guitar Pick just to open the back cover, Heat Gun , Soldering Paste, Thinner/Petrol and Toothbrush to clean the board.
    It'll work 100% :)

    • @sebastianlatth2271
      @sebastianlatth2271 5 ปีที่แล้ว

      what is the thinner/petrol used for?

    • @Haamedtm
      @Haamedtm 5 ปีที่แล้ว

      Hi, thanks for the video.
      is it still working fine?

    • @CelloGraph
      @CelloGraph  5 ปีที่แล้ว +5

      It died after 10 days of usage

    • @Haamedtm
      @Haamedtm 5 ปีที่แล้ว

      @@CelloGraph yeah mine died after one day...
      should i change the main board or just throw away the device?

    • @CelloGraph
      @CelloGraph  5 ปีที่แล้ว +1

      Changing the board ain't gonna work. Better to change the device.

  • @Nandox7
    @Nandox7 6 หลายเดือนก่อน +2

    This is old, but leaving a tip for all.
    To easily remove the back cover, remove the sim tray, with that you expose a bit part of the cover and allowing to pull it a bit to insert the plastic pick.

  • @matinvlogs1409
    @matinvlogs1409 5 ปีที่แล้ว +10

    it works for my nexus 5x thank you brother

    • @CelloGraph
      @CelloGraph  5 ปีที่แล้ว +1

      Good to hear that bro

  • @eliasnavytanga
    @eliasnavytanga 4 ปีที่แล้ว +3

    Thanks, got 2 phones have the same problems. Boot loop. It seems that is the huge problem for LG

  • @slimessiful
    @slimessiful 5 ปีที่แล้ว +9

    Did i just buy a faulty phone?

    • @CelloGraph
      @CelloGraph  5 ปีที่แล้ว +6

      If it's 5x then unfortunately yes

    • @kevinmayers9596
      @kevinmayers9596 5 ปีที่แล้ว

      So do I it's not even coming on wish I knew this before I bought it only had it a fee days now bought 2nd hand off eBay

  • @MayankSharma-ls7ih
    @MayankSharma-ls7ih 4 ปีที่แล้ว +3

    I used hair dryer but not working😭😭

    • @CelloGraph
      @CelloGraph  4 ปีที่แล้ว

      Try to put heat on top portion where the chipset located

  • @silveralsr
    @silveralsr 5 ปีที่แล้ว +5

    Nice, video. What type of soldering solution you are using?

    • @CelloGraph
      @CelloGraph  5 ปีที่แล้ว

      Its a normal soldering solution it came with solder

  • @slawomirslyk
    @slawomirslyk 5 ปีที่แล้ว +3

    Is it permanent fix or just for couple of days? I bought mine to try some alternative software, plasma mobile. I rather expected some software issue but it's definitely hardware. So I bought crap, whis is like anything else from the google.

    • @CelloGraph
      @CelloGraph  5 ปีที่แล้ว +2

      There's no permanent fix and this procedure can give a week life atleast

  • @camren7271
    @camren7271 5 ปีที่แล้ว +2

    Mine didn’t even do that, it just completely died and when you go to put it on charge a red light comes on at the top. 🤔

    • @CelloGraph
      @CelloGraph  5 ปีที่แล้ว +1

      Put it on charge for atleast an hour then try

    • @camren7271
      @camren7271 5 ปีที่แล้ว +2

      TDG Tech thanks! Will try that although i think it’s done for it died months ago and only recently found the phone again 😂🤦🏻‍♀️

    • @CelloGraph
      @CelloGraph  5 ปีที่แล้ว +1

      Haha try and let me know if it works

    • @prakashchaudhary839
      @prakashchaudhary839 5 ปีที่แล้ว +2

      i face the same problem i think we have a battery problem not bootloop so i have ordered a battery to check if it works

    • @camren7271
      @camren7271 5 ปีที่แล้ว +4

      Prakash chaudhary ooh tell me if your phone works after replacing the battery please! I have a new phone now but I do miss my nexus so would like to see if it was the battery that was the problem.

  • @roxannenunya9453
    @roxannenunya9453 5 ปีที่แล้ว +2

    How long did this solution have phone working mine only lasted a few hours?? So if I do the whole update is that a waste of time?

    • @CelloGraph
      @CelloGraph  5 ปีที่แล้ว +1

      After 10 days of usage it died again

    • @roxannenunya9453
      @roxannenunya9453 5 ปีที่แล้ว +1

      @@CelloGraph thanks im going to try the abd firmware technique I'll let u know how it goes

  • @mandipsalh960
    @mandipsalh960 4 ปีที่แล้ว +1

    I just need to turn the device on to back up some photos. What is this hair dryer heat up method?

    • @CelloGraph
      @CelloGraph  4 ปีที่แล้ว

      Just put the heat on the back of the phone it will work till the phone comes back to the normal temperature

  • @localman4429
    @localman4429 5 ปีที่แล้ว +5

    LG are usually let their smartphone get bootloop

  • @nouhbelahcen4486
    @nouhbelahcen4486 5 ปีที่แล้ว +2

    Still working ? and what you put on CPU before you heat it ?

    • @CelloGraph
      @CelloGraph  5 ปีที่แล้ว +2

      Normal solding solution

    • @CelloGraph
      @CelloGraph  5 ปีที่แล้ว +6

      It died again after 10 days

  • @methodofguy700
    @methodofguy700 3 ปีที่แล้ว +2

    I really wish i had this 3 years ago..

  • @pedritoapmovil7254
    @pedritoapmovil7254 5 ปีที่แล้ว

    thank you for the video too i find myself hace of the days and is working ok

  • @vifvrTtb0vmFtbyrM_Q
    @vifvrTtb0vmFtbyrM_Q 5 ปีที่แล้ว +4

    Not working method. You need rebolling CPU + RAM

  • @saadatalijan4160
    @saadatalijan4160 2 ปีที่แล้ว

    I try this but only 2 hours my phone is working

  • @NikadoPlay
    @NikadoPlay 3 หลายเดือนก่อน

    If I buy a refurbished Nexus 5x on Aliexpress, is there a risk of experiencing this bootloop problem?

    • @CelloGraph
      @CelloGraph  3 หลายเดือนก่อน

      It will occur again. It's actually the faulty board design that cause this issue.

  • @kurtwagner8537
    @kurtwagner8537 4 ปีที่แล้ว

    What happens when the SoC gets in direct contact with the heat ?? It had worked the first time then the error came again. I did it again and the device worked again. The device has no root and the bootloader is too. I installed Substratum the next morning and Andromeda from XDA ran the script on the pc. Later, the device did not start anymore and stayed in fastboot mode. Now it does not start anymore. So I ask if it can be that it does not start because the Snapdragon was too hot. because otherwise everything looks good. ??????

  • @HABIBI_Sports
    @HABIBI_Sports 5 ปีที่แล้ว +1

    if i dont update my phone,can bootloop will happen.. i dont know english good..please help me... i want to buy a lg g5 phone..for this bootloop issue i am very confuse ,what i do

    • @CelloGraph
      @CelloGraph  5 ปีที่แล้ว +1

      It has nothing to do with the update its a hardware defect.

    • @HABIBI_Sports
      @HABIBI_Sports 5 ปีที่แล้ว

      thanks..

    • @tim6876
      @tim6876 5 ปีที่แล้ว

      don't buy the G5, it's crap.

  • @manuelfranciscocanulpat6106
    @manuelfranciscocanulpat6106 4 ปีที่แล้ว

    Hi. My nexus 5x touch not working. This method working ?

  • @Oveia1
    @Oveia1 5 ปีที่แล้ว +2

    What is this yellow paste?

    • @CelloGraph
      @CelloGraph  5 ปีที่แล้ว +1

      Soldering solution

    • @gorandjekic9989
      @gorandjekic9989 4 ปีที่แล้ว +1

      Is there any alternative to soldering solution?

  • @sushantjadhav2462
    @sushantjadhav2462 5 ปีที่แล้ว

    Sir in this video where are you used thinner/petrol?

    • @CelloGraph
      @CelloGraph  4 ปีที่แล้ว

      To clean the dust from the processor

  • @florsoria7333
    @florsoria7333 5 ปีที่แล้ว +1

    Very good, but how long will it be in operation?

  • @xfussoin7297
    @xfussoin7297 3 ปีที่แล้ว

    I put mine in the freezer and it semed to work

  • @TheRealFobican
    @TheRealFobican 4 ปีที่แล้ว

    How many times can this be done until it permanently dies and cannot be revived again?

    • @CelloGraph
      @CelloGraph  4 ปีที่แล้ว

      It can be done multiple times but there's no permanent fix unfortunately

  • @alvarodominguez7406
    @alvarodominguez7406 5 ปีที่แล้ว

    Hello, just wondering still working tour phone with this method ?

    • @CelloGraph
      @CelloGraph  5 ปีที่แล้ว +1

      After 10 days of heavy usage it died again

    • @mcantisnake
      @mcantisnake 4 ปีที่แล้ว +1

      CelloGraph maybe hou Should update the video description

  • @saadatalijan4160
    @saadatalijan4160 2 ปีที่แล้ว

    again same problem

  • @faizulrosni9570
    @faizulrosni9570 5 ปีที่แล้ว

    Hai sir..is it glue??

  • @luislavayen9495
    @luislavayen9495 5 ปีที่แล้ว

    que es esa crema que le pones arriba del procesador; help por favor

    • @simic4499
      @simic4499 4 ปีที่แล้ว

      Creo que es pasta flux para soldar, tambien lo venden en liquido.

    • @menamariano
      @menamariano 3 ปีที่แล้ว

      si el idioma del tipo es ingles, porque le preguntas en castellano?

  • @omprakashmahto6417
    @omprakashmahto6417 5 ปีที่แล้ว +3

    It will work on nexus 6p

  • @HA6LO
    @HA6LO 5 ปีที่แล้ว +1

    is it still working?

    • @CelloGraph
      @CelloGraph  5 ปีที่แล้ว

      It died again after 10 days of usage

  • @Zenderman85
    @Zenderman85 4 ปีที่แล้ว

    Помогло

    • @max_sobyanin
      @max_sobyanin 3 ปีที่แล้ว

      Работает ещё?

    • @Zenderman85
      @Zenderman85 3 ปีที่แล้ว

      @@max_sobyanin да

    • @max_sobyanin
      @max_sobyanin 3 ปีที่แล้ว

      @@Zenderman85 буду пробовать ✌️

    • @Zenderman85
      @Zenderman85 2 ปีที่แล้ว

      @@max_sobyanin Нет. Так же в луп ушел

    • @Zenderman85
      @Zenderman85 2 ปีที่แล้ว

      Перестало работать