That box is pretty good, used it for a while and it took a damn beating and had just enough room for the tools I need as an aircraft mech. (light maintenance not heavy stuff or sheet metal work)
Nice little box 📦 mos-def needs better tools 🔧 in it? 4 way screw driver, it's a 1/4" driver as well and an extention if better quality. Thanks for the short video 📹 🙏
I'm deciding weather I should get this or buy a few of the plastic boxes. I have a set of hf impact sockets that I need to find space for and to keep with the rest of my small tool collection (deep and stubby sae). they're so damn big! btw I use the free hf stick magnets to keep my sockets in place. they do a hell of a job compared to the cheap socket organizers sold for a dollar at hf
Hey Bill, Great idea on the free magnets! I'd say get the Husky box. There is something about the ball bearing drawers and the solidness of the metal construction versus a plastic box that just makes every project seem a little nicer.
This was a great video review. U have a funny sense of humor and kept me laughing the whole time. Thanks for sharing. Im going to check out that box cause my truck box sucks! Really like the top drawer and bearing drawers. Cant beat the price too. Take care brother
This review reminded me of an ex girlfriend. She was all over the place, but yet OCD at the same time. The only difference was that she always had the right tools for the job.
I'm thinking of grabbing this box. $45 now. Don't know how to get it cheaper other than to wait till Xmas for them to mark it down 10%. Wow, I'd save $4.50 waiting for 8 months. I'm pretty sure all Husky stuff has a lifetime warranty, though I may be wrong about that and only certain things do.
Locks do conote value. :) good video...i am tired of searching for tools in my tool box...def going to look at this metal drawer one. like the wrench holder trimming
Just got the craftsman box with tools. I'm going to put handles on the sides. I'll do a video for it. Tough because its double walled with 1/2" gap and not a lot of space between the rails inside. I took a set of heavy handles off a Harbor Freight 26" US General to;p box. Nice handles. The Craftsman box is nice for the money, the set of tools with it is probably a $80 set at best. Its got all 3 size drives, but not to many 12pt 1/2 sockets and tiny wrenches. Other than that, the box allows tons of room to add tools.
"... I'm basically missing any wrench needed... specific job ..", in one portable, convenient package. SOLD! Been wanting a new box for the tools I do keep in the truck and this should work. I enjoyed your review of the Husky box almost as much as your response to the comments. Subbed. And DO check out AvE, you'll understand the references to the similarities. Stay safe, you have content to create.
"I'm basically missing any given wrench I need for a specific job" hahaha so true... great review
Thanks JUGGERNAUT!!!!
Thanks for the nature g
I been using the husky toolbox per about 5 months works great I really like it
I have the older version, a red one. Been using it since the ‘80s, very durable piece.. or it ain’t called husky no how!👍🏻
I used this tool box for all my firearm cleaning Supplies, Tools..etc.
That box is pretty good, used it for a while and it took a damn beating and had just enough room for the tools I need as an aircraft mech. (light maintenance not heavy stuff or sheet metal work)
Nice little box 📦 mos-def needs better tools 🔧 in it? 4 way screw driver, it's a 1/4" driver as well and an extention if better quality. Thanks for the short video 📹 🙏
Great video, ever thought about using foam inside the drawer.
Thanks for the nature
Does a drill fits on the top compartment?
I just picked one up for my knife collection. I got a nice hand me down toolbox I bought for work. It looks like it’s from world war 2
Do you still have that blow molded case? I have the same exact setup but lost the plastic divider. Let me know if you’re willing to sell it. Thx
I know am I am five years late watching this video. But I am going to ask, Where did you get the socket rails?
I'm deciding weather I should get this or buy a few of the plastic boxes. I have a set of hf impact sockets that I need to find space for and to keep with the rest of my small tool collection (deep and stubby sae). they're so damn big!
btw I use the free hf stick magnets to keep my sockets in place. they do a hell of a job compared to the cheap socket organizers sold for a dollar at hf
Hey Bill,
Great idea on the free magnets! I'd say get the Husky box. There is something about the ball bearing drawers and the solidness of the metal construction versus a plastic box that just makes every project seem a little nicer.
I have the craftsman one and needed ideas for organization. Thanks for the video
Thanks for comment!
How does this compare with the red Craftsman one?
This was a great video review. U have a funny sense of humor and kept me laughing the whole time. Thanks for sharing. Im going to check out that box cause my truck box sucks! Really like the top drawer and bearing drawers. Cant beat the price too. Take care brother
Thank you for the comment - glad I kept you laughing!
This review reminded me of an ex girlfriend. She was all over the place, but yet OCD at the same time. The only difference was that she always had the right tools for the job.
Haha always good to remind someone of their ex.
gotta do more reviews for us bud
I'm thinking of grabbing this box. $45 now. Don't know how to get it cheaper other than to wait till Xmas for them to mark it down 10%. Wow, I'd save $4.50 waiting for 8 months. I'm pretty sure all Husky stuff has a lifetime warranty, though I may be wrong about that and only certain things do.
Nevada Sage it is a lifetime warranty
Just bought this tonight to replace a Craftsman box that was stolen, 3 years on from your post and the Husky is $59 now
How do you take out the draw?
Great video man! Re organizing those carry sets when they fall out everywhere is the worst! Nice setup!
Appreciate the kind words
How much does it weigh empty?
Locks do conote value. :) good video...i am tired of searching for tools in my tool box...def going to look at this metal drawer one. like the wrench holder trimming
works beautifully
Just got the craftsman box with tools. I'm going to put handles on the sides. I'll do a video for it. Tough because its double walled with 1/2" gap and not a lot of space between the rails inside. I took a set of heavy handles off a Harbor Freight 26" US General to;p box. Nice handles. The Craftsman box is nice for the money, the set of tools with it is probably a $80 set at best. Its got all 3 size drives, but not to many 12pt 1/2 sockets and tiny wrenches. Other than that, the box allows tons of room to add tools.
Is the craftsman one better quality?
Killer review, you're pretty entertaining
thanks man, glad you enjoyed the vid!
Where did you get that box?
Home depot
whats home depot parts number for this thing, its cheaper then the craftsman one.
Model# TB-303B
Great review thanks for the vid very helpful
glad the video was helpful!
I'd have a beer with this guy. Lol seems fun.
Lol thanks for the video and the nature.
That’s a 6 in 1 screw driver the ends where the Phillips and straight are 5/16 and 1/4 drive
Good banger. Tool box
"... I'm basically missing any wrench needed... specific job ..", in one portable, convenient package. SOLD! Been wanting a new box for the tools I do keep in the truck and this should work. I enjoyed your review of the Husky box almost as much as your response to the comments. Subbed.
And DO check out AvE, you'll understand the references to the similarities.
Stay safe, you have content to create.
Thanks for the kind words brother
Thanks for the kinds words brother
I need this
Was this a review of his crappy tools or the Husky Box, I'm confused.
You definitely watch too much Ave
Bro I have no idea what that means.
Live Sticky look up AvE on TH-cam.....you sound just like the dude,slang and lingo is identical