Beading4perfectionists : Kumihimo flat wide cuff braid on round disk tutorial

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 ก.ย. 2024
  • Kumihimo on table
    • Kumihimo
    How to qadd the end clasp (about 10:20 in to video for clasp adding)
    • Beading4perfectionists...
    ebay end clasp link for 25mm wide clasp
    www.ebay.com/it...

ความคิดเห็น • 46

  • @FastUpOnRabbitCare
    @FastUpOnRabbitCare 11 ปีที่แล้ว +6

    Nice tutorial, thank you. I made this cuff using a square disk. String the threads from 1-10 on top and 11-20 on bottom. Move #16 to E and #15 to e/ #5 to f and #6 to F. Exchange threads as shown in the video. Pull the side threads tight then move e to #10 and f to #20/ E to #1 and F to #11. Again, thank you for the tutorial. I couldn't have done it without you. :)

  • @lyricdesigns
    @lyricdesigns 6 หลายเดือนก่อน

    This was really helpful to me because I only have the round disk, now I know what I want to try for my next project. Thank you for sharing!

  • @agrimonyscrafts2089
    @agrimonyscrafts2089 7 ปีที่แล้ว +6

    I made this bracelet but made it long enough to be a choker necklace. My problem was I must have tightened the two side cords (like you said), but I must have tightened them too much because it felt to rough and tight. So what I did to loosen them I took every two inches and between my two hands I would wiggle that part of the necklace in little circles, then move down about another two inches again and wiggle that part and so on till I did the whole necklace. Maybe this tip will help someone else who might have the same problem. This was a great video. Thanks so much and God Bless.

  • @emmabates9554
    @emmabates9554 9 ปีที่แล้ว +2

    Great tutorial. I've made some of these using embroidery silks and they are beautiful. Thanks for uploading.

  • @davidpaul9365
    @davidpaul9365 10 ปีที่แล้ว +7

    I think this is brilliant in any language. I'm an older male with to much time on my hands. Your patience is inspiring, I'm a carpenter so making a disc is easy, finding the silk and clasps,Ebay ? Could be a busy year, many thanks.

    • @b4pmacrame
      @b4pmacrame  10 ปีที่แล้ว +2

      I think you would sell them if you make more. These eventually break down due to wearing them out. Although I'm not using them much I have no doubt wooden ones would sell great :-)

    • @RuthTemple
      @RuthTemple 8 ปีที่แล้ว +1

      +David Paul Take a look at braidershand and maybe talk with Dave; there's a growing need for actual marudai & their particular bobbins in the US, if you're interested in making them. (Takadai and Karakumidai too, to a lesser but fervent degree)...

    • @maitecoolegem4367
      @maitecoolegem4367 7 ปีที่แล้ว +1

      David Paul

    • @maitecoolegem4367
      @maitecoolegem4367 7 ปีที่แล้ว +1

      David Paul

    • @maitecoolegem4367
      @maitecoolegem4367 7 ปีที่แล้ว +1

      Oo

  • @kathybray7156
    @kathybray7156 ปีที่แล้ว

    This is very pretty loved your choice of colors

  • @nccfanatic
    @nccfanatic 9 ปีที่แล้ว +13

    I love this design but the video leave a bit to the imagination. It's difficult to follow because all of the top disk work is done off camera. It would be worth it to make another video showing all moves clearly. Thanks. :)

  • @sanalina6432
    @sanalina6432 7 ปีที่แล้ว

    شكرا لك فيديو رائع و شرح مفصل،أتمنى لك مزيدا من النجاح و التفوق.thanks, i love it

  • @user-ii1ef2dn3d
    @user-ii1ef2dn3d 5 หลายเดือนก่อน

    Very nicely thank you for teaching ❤❤

  • @edwinareed5657
    @edwinareed5657 11 ปีที่แล้ว

    brilliant I have only got the round disk so will try this thanks a lot..

  • @samimarino7894
    @samimarino7894 11 ปีที่แล้ว

    Right now I am working on an eight warp but once I am done I will surely try this! (Yes, I am 11 years old and doing kumihimo. Don't judge me.)

  • @katekyi2604
    @katekyi2604 11 ปีที่แล้ว +1

    I noticed you are always tensioning your threads, if you have a weight a the bottom it helps keep the tension. If you havent got one already you can use an old film canister (the small ones) put some coins in it and attach a thread around the cannister. Attach this with a bulldog clip to the start of the threads to keep an even tension.

  • @desimoonrik
    @desimoonrik 10 ปีที่แล้ว +2

    Thank you for this video.Could you tell me what size is each thread?

  • @jannyb55
    @jannyb55 11 ปีที่แล้ว

    Brilliant Gianna. Well done I love it. x

  • @petrasalazar2725
    @petrasalazar2725 5 วันที่ผ่านมา

    Que linda bendiciones ❤

  • @madelinebrownlee5787
    @madelinebrownlee5787 7 ปีที่แล้ว

    Love your teaching ability, excellent demo were it not for half the work isn't visible because of camera angle.

  • @charlottesharkey4803
    @charlottesharkey4803 10 ปีที่แล้ว

    Where did you get the loom with the small holes at the inside ends of the slots? I'm having problems because there is not enough room for the 2mm satin cords, as there is only a slot--no hole. Thanks!

  • @rickylambert814
    @rickylambert814 ปีที่แล้ว

    is there a way get moves as u qauick and hand covers working

  • @albaluciapinedadiaz8338
    @albaluciapinedadiaz8338 6 ปีที่แล้ว

    Es muy linda , pero por el idioma no entendí lo ideal sería ver cómo coloca los hilos para poder seguir el tejido saludos desde Colombia un abrazo

  • @onlyyou2732
    @onlyyou2732 4 ปีที่แล้ว

    Preciosa.Me gustaría que fuera traducido al español .Gracias.

  • @LauraGarcia-lm9pg
    @LauraGarcia-lm9pg 5 ปีที่แล้ว

    Pls tell me how you calculate the length of cord to do a belt...tks!

  • @davidpaul9365
    @davidpaul9365 10 ปีที่แล้ว +1

    Forgot to ask, aprox how long each silk strand did you use for your cuff ? thanks.

    • @b4pmacrame
      @b4pmacrame  10 ปีที่แล้ว +2

      oompf good question I think about a meter

  • @albaluciapinedadiaz8338
    @albaluciapinedadiaz8338 7 ปีที่แล้ว +1

    lo ideal sería como monto los hilos ,los hilos son en degrade ?

    • @user-kx5kp9cw4m
      @user-kx5kp9cw4m 6 ปีที่แล้ว +1

      Alba Lucia Pineda Diaz m s a Alfars

  • @pakita1292
    @pakita1292 9 ปีที่แล้ว +1

    hola, me podria decir de cuantos centímetros es cada cordón, por favor, asi sea en ingles.

  • @albaluciapinedadiaz8338
    @albaluciapinedadiaz8338 7 ปีที่แล้ว +1

    x fa enfocar bn la camara para ver bn los nros k se corren saludos

  • @lindagraham9610
    @lindagraham9610 8 ปีที่แล้ว

    very beautiful

  • @burbear47
    @burbear47 10 ปีที่แล้ว +1

    How do you end thus?

    • @b4pmacrame
      @b4pmacrame  10 ปีที่แล้ว

      underneath the video in the description are the links how to add the ends and which ones to get. don't know if the ebay link is still working though

  • @caso1221
    @caso1221 10 ปีที่แล้ว

    thanks!

  • @coralinenootenboom1493
    @coralinenootenboom1493 8 ปีที่แล้ว

    heb je ook hele brede armbanden??

  • @scarlettlily422
    @scarlettlily422 11 ปีที่แล้ว +1

    same but i'm ten

  • @rizqibayupratama2981
    @rizqibayupratama2981 5 ปีที่แล้ว

    Im still confuseddd

  • @giselebureau583
    @giselebureau583 6 ปีที่แล้ว

    En français

  • @LauraGarcia-lm9pg
    @LauraGarcia-lm9pg 6 ปีที่แล้ว

    Not very good yr explanation...you do not show the complete work all the time we have to guess NARS up you are only showing HALF of yr work...confusing to say the least

  • @alfkey4155
    @alfkey4155 10 ปีที่แล้ว +4

    sorry,, did'nt like this at all ,comentry was good ,camera to close

  • @rossiomiranda981
    @rossiomiranda981 3 ปีที่แล้ว

    me salio partido esto es una caca

  • @tracyhall4648
    @tracyhall4648 5 ปีที่แล้ว

    Her voice sounds like a Guy..lol