ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
How Strong Are Prince Rupert's Drops? Hydraulic Press Test!
ฝัง
- เผยแพร่เมื่อ 16 ส.ค. 2019
- How strong are prince rupert's drops? We have regular size, large and world's largest prince rupert's drops to be tested with our 150 ton press and 150 ton force sensor!
Here is link to video about making the drops • World's Largest Prince...
And here is link to super slow motion video where we crush some rupert's drops • Making Light by Crushi...
Our second channel / @beyondthepress
Our fan shop www.printmotor.com/hydraulicp...
/ officialhpc / hydraulicpresschannel
Do not try this at home!! or at any where else!!
Music Thor's Hammer-Ethan Meixell
I was seriously scared pressing the largest one after even the smaller one damaged the blast shield :D This was one of most interesting videos to film ever so hope you like it!
Do a collab with the slow to guy's
*spoiler alert* lol
You have dealt with it!
The tail of the Ruperts Drop is weak, try a large one without putting force on the tail!
Can You drop liquid glass into liquid nitrogen?
"don't try this at home"
sad look over to my 200 ton hydraulic press
Laughing my ass off 😂😂
Not today...old friend
At least now you can make sure that your PB&Js are super compact. Right?
😂
Heuuuddrlaoolik plresss
People in steel bunkers shouldn't throw glass stones...
I'm impressed
Holy 🐄
Respect
@Black Sun Gamer Did you... watch the video?
The Glass drops were so hard that they leave a dent in the steel.
@Black Sun Gamer are you fr? Do you even try?
I knew they were strong but I had no idea they could leave an imprint on the steel of a hydraulic press. That is truly amazing.
@Patrick Bateman Agreed, I knew PR's drops were super sturdy, but didn't expect them to make such a uniform dent on the steel press itself lol
You can shoot them with a bullet too
I’m not surprised. They can shatter bullets.
Now let's see paul allen's hydraulic press
@@harrylane4 Bullets are actually made of softer and therefore less durable materials than steel. This is so that they can spread over an area when they hit and penetrate a target, causing them to undergo more resistance and thus deliver more impact force rather than just going straight through. It's also to reduce frictional damage on the interior of the barrel it's being fired from.
The interesting thing with Rupert's drops is if you damage the tail whatsoever, it literally explodes. I think with that large one, you can check it tilt towards the tail, and it might've placed the tail under more pressure at an angle on the tail, which caused the whole thing to explode. Had you kept the pressure only on the ball/teardrop section, I think it would've gone much higher.
I agree on this. The biggest drop moved and the middle part touched the metal part of the press. This, likely, was the cause of it shattering too quickly. I was expecting they saw this and had a do-over of the biggest Rupert's drop. Cool video... but not a complete experiment.
Yeah - It looked that way to me too. The irregular shape of the drop played a part, but it still looked like there was a frame where the wider part of the tail / base of the head might have touched.
If you melt the tail of one of these drops then congratulations you created an unbreakable object
I agree, it looks like the tail hit the edge of the anvil.
@derrickhageman1969 actually I believe that when the tail is removed it makes it weaker.
The largest broke early due to the tail being pressed into the puck. REDO
Hope people vote it up, so they see it and test a big one again
Agree, I noted how it was placed and thought the tail would get some force earlier and it would not last as long as the medium. Still insane to think of the force applied on those. Would like a repeat as well.
Yup, I saw that too.
I saw it happen and went straight to the comments to see if anyone mentioned it. thank you sir.
Yeah redo this for sure
"In the name of science... or views"
Spoken like a true TH-camr.
Thanks for pointing that out, I didn't understand him, very funny! 🤣
I thought he said "or abuse" which would have also made sense xD
Legit read this and heard it in the video at the same time lmao
@@DELUXPLUS1 i thought he says or wheels lmao
7:40 or "vriews"
I can't take this song seriously anymore 0:03
😂😂😂😂😂
😡😡😏🔥🔥🔥
I think the one at 7:55 might've gotten displaced as the press came down, causing a bit of pressure at the widest part of the stem. That could be why it broke quicker than the smaller ones. That's crazy to think of how hard the PR's drops are at the bulb, and fragile on the tail lol
ye thats why it exploded
i agree with this. it broke prematurely.
Looked like it for me too. The huge one wasn't properly placed I guess.
Yeah i think you're right
The fact that you can imprint on solid steel using glass just blows my mind.
A human hair can do it too.
Hi
Its in the shape, a circle like that is the strongest shape in the world.
Glass is extremely hard. that’s why it’s so brittle
how? glass is well known in science to be harder than steel
"In the name of science...or views."
I appreciate your honesty lol
Lol i read ur comment at exactly the moment he said that..
@@DI-fj2sk me too, lmaoo
I thought they said abuse, not views. Lol.
He said it right as I read it
D I Damnn mee too😂
Mr incredible likes the intro
The intro is Mr incredible become canny 😂
"Holeh sheet, that vas hard!"
Das vhat she said!
🤣
da ooooofissss
5:28
finally I’ve been looking for this comment
Not the answer we need, but the answer we deserve
You guys should collab with the slow-mo guys to record these explosions
They probably live far away from them I'm guessing by accent
gamegodbro they live in finland
Even if they live far away getting together at some point could make some great crossover content for the benefit of both channels
They both live in Europe, a 2 hour flight apart max
Christopher Johnson Gavin lives in Texas
For those not keen on Kilograms, that first one took 63000 pounds of force before shattering. That's the weight of almost 5 Humvees focused on a spot the size of a grape. Absolutely insane.
Wtf 63000 British pounds? That’s crazy expensive!
Thanks for converting
@@chrisjlee2013are you sarcasyic
@@sarahgatchie no.. I’m fantastic 🤤
Kg's make more sense to me than Humvees 😅
This is an awesome video my friends! I love your channel! You bring some joy to a person that really needs it.
This dude is young? By his voice, he sounds like a crazy old professor! Lol.
Yeah........
😂
Professor Ludwig Von Drake? Maybe?
Thats just the finnish accent 😂😂😂
@@aarni-2660 It's finnish? I thought he's Indian xD
I’ve always been curious about this, thank you for answering my questions
I dead ass jumped out of my chair when the first one exploded.
"Holee sheet that was a-hard."
I'm going to put that on a tshirt.
"That was pretty mean"
"that´s what she said"
Holee tshirt that was a-hard
I'll do it too
Oh mai gawd!
You should put some ballistic gel in the chamber to see the damage standing near an exploding object on the press would cause
bluesboytyler that sounds really cool actually
Yes
*slap*
Ballistic gelatin!
Oh wait that's JoergSprave
Oh yeah Mr. Krabs.
@@potat1478 The Finnish guy definitely should show the features of his press! :D
"In the name of science! ...or views!" 🤣 This was freaking incredible.
It would be interesting to see if you could pinpoint a size in which you begin to see diminishing strength.
This is the best channel on youtube by far lol
6:53 "And the shrapnel leaves the scene about 100m per second, I think it's good to have the blast screen".
I'd agree with that assessment.
they would literally have been dead without it lol. I also agree
Glass was going 360km/hr or 223 mi/hr
I agree with using masks and breathing apparati, thanks for the experience, but be safe you two!
I don't know why but for some reason his accent makes "holy shit" so much funnier.
Yes it did. I had to pause the video from laughing so hard. "Holy Shit-a". 😂😂😂
It like the Swedish chef got big time freaked.
They are Finnish Mumin people
@@patrickmclaughlin61 Norwegian Gordan Ramsey
Contin u e
I knew they were insanely strong since I've watched other people make small ones, but these literally made my jaw drop. Glass taking 67 tons to shatter is insane!
I think this is my favorite video of yours!
Hi guys quick safety issue here.
My mom used to work at a glass factory and when I showed her this video she was a little worried about y’all’s safety. She said that back at her job people had to wear special suits to handle broken glass because of all the tiny particles that resemble dust that remain in the air. It apparently can get in your eyes and if you inhale them it can be very bad for your lungs! She says very awesome video but be careful when handling this type of residue!
He literally says in the video "we have to wait for the dust to settle", so, I'm pretty sure they're aware of very fine, airborne glass particles...
Thank you for informing us! 🙌🏼
It's brittle and weak they should try a book or a anvil
@@JuanMartinez-hy6yf What do you mean?
I ain't going lie, that's a horrifying concept
10:10 - “I have large, steel nuts”...
Yes sir, you do. You really do.
Mark Gearing too gay bruh 😅😂
...
@@mrlebanon6055 if you have nuts you are automatically gay
The Minus Kai FUCK
@@theminuskai7453 ಠಗಠ
I love the way you said "what the hell" , love this video too
That was amazing! I always wonder what happens if a rupert's drop is pressed! Thank you!
5:28
When you finally beat dark souls
Ahaahha a nice one mate 😂😂🔥
Nah, Dark Souls pales in comparison to the difficulty of Nioh
I agree!!
I hate ads for time stamps...
That’s what she said
Not to me ik
That medium sized Rupert's Drop could almost, in theory, hold an M1 Abrams Main battle tank on top of it. It took 67.7 tons of force to break it and a standard M1 Abrams weighs 67.6 tons. You go glass.
The Rupert's drop could handle 67.7 metric tonnes, which is more than an imperial ton, so the drop could actually handle much more than the weight of the tank
@@elisteele6481 yep the Abrams is only 61.3 metric tonnes (M1A1 S1)
Wtf. Even tonne has imperial an metric???
@@mj31382 Metric ton is 1k Kilograms and Imperial Ton is 2k pounds
@@brute6896 Imperial ton is 2,240 lb
I just love the joy in your wife's voice whenever something blows up!
Your channel content is so good that they use your intro music as a part of the canny meme
7:58 - I don’t think the shape was the cause of the early failure, I’m pretty sure it was because the tail got pressed against the bottom plate.
That's exactly what I was going to write. I'm pretty sure it would've held up better than the second drop.
Yep this is exactly what I was thinking. Looking at the high speed of the medium drop, you can see that the micro fractures originated in the drop and extended through the tail. With the large drop I was waiting to see the high speed but it never came. Either way, I think we need a retest.
No the head broke, if you play in slow motion you can see it shattered from head to tail
I agree
Could be the vacuum bubble that caused earlier breaking.
5:28 me when I get out of the exam
LMAO!
🤣
lmao gold
3:18 also
You need a new doctor.
Mr incredible theme
Gotta love the intro man
5:28 "holy shit, that was hard" this will be my new ringtone XD
akeslav 6:18 “hooooly shit... thats huge”
@@Jelly-ij2pw If only he said it in the same voice it would be perfect :D
Followed by the female going “WHOA!!” Hahaha
@@sigguy1361 yeah haha. Take that out of context XD
😂😂
7:55 the tail touches the base. Probably thats why it exploded so early
first thought I had. a shame, was hoping to see that climb over 100 tons
Yeah
My thoughts as well.
It definitely did!
This.
5:28 "Holy shit that is hard!"
HPC out of context...
That is Bonkers! WoW! Hello from Minnesota!
Aliens were playing with a giant hydraulic press and made the big bang.
And that's how everything was compacted into the singularity. Stellar wisdom
I mean technically it’s plausible. Our whole universe was in a small, Dense state then it suddenly expanded and has kept expanding.
Maybe this explosion have created a glass universo.
You’re a hydronic press
How were there aliens before the big bang then.
In my opinion, you guys must collab with the slow-mo guys for recording these super fast explosions ...
Yes
THEY NEED TO!!!!!!
It’s honestly mind-shattering
The Hydraulic Press Channel is good to the last drop!
For the big drop, the tail contacted the metal. Prince Rupert's drops has the interesting property that if the tail is nicked at all the whole drop shatters.
Yeah that's the same observation I had with the big one; it got slightly displaced from the press coming down, causing the slightest pressure on the widest part of the tail lol unfortunate but still cool results and experiment nonetheless
Thank you for the Steel nut comparison. It really brings into contrast just how *absurdly* hard the Prince Rupert's drops are.
I saw a video where people took handguns and shot the drops, most of the time the drops crushed the bullet and then exploded when the tail wiggled around too much from the impact.
@@Nyghtking Smarter Every Day made two videos about shooting drops. This is the later one: th-cam.com/video/k5MORochIDw/w-d-xo.html
Ether Melt IKR!
The way the hydraulic press just made a reluctant sigh at the end
I watched mr incredible memes too much that the intro song just instantly rang a bell
I feel like they should be wearing respirators with such fine glass dust
Crystalline Silica in this small size is extremely dangerous to humans. Breathing it can cause Silicosis, severe lung problems and cancer.
Good point.
Crystalline silica is also heavier then air so in a non drafty area after a time all will fall to ground. They waited 15min.
The press is encased
Aw man, I was inhaling glass dust as a DIY asthma cure.
6:30
When u put the equivalent mass of a modern main battle tank on a 1cm area of metal
Nice point of view
When you think about it like that. Thats some fucking hard fucking steel
Could be perfect composite armor if there's a way to it
Cyclone McSlav there’s already fiber glass armor vests
@@fuckman297 I feel like fiber glass armor would be a terrible idea, especially if a bullet penetrates it. If you mean Kevlar then that's a different story
I think it might be possible to make a perfect Rupert's drop under microgravity conditions. Might be a bit of a challenge to figure out how to immediately immerse it in water without touching it or allowing it to touch the walls of a containment vessel
In a micro gravity surrounding, you wouldn't be able to pour the molten glass. I suggest that you drop it in a colder, deeper body of water so the glass can somewhat harden enough before hitting the ground/floor.
@@random_bs_goo9154 I think he means a Rupert's drop without a tail. A "perfect" Rupert's drop. In 0g you could melt glass into a perfect sphere, and then cool it quickly to make a spherical Rupert's Drop.
@@clintonleonard5187 @OP tell us which one
Nice video! The exploding drops make me think of the big bang.
1:50, the scale was sent to oblivion.
Nagol _06 Not even, it was sent to morrowwind
Kermeeet TheDestroyer, you apparently don’t Know really what oblivion is ( the place not the game) because it has Nothing to do with région as oblivion is a dimension similar to hell
2:12 3:19
When he said "Vat Da Hell'' and" Holey Shitt"
I felt that.
颶風Hurricane “hoelee shiet”
Click one time stamp than the other, it becomes a fun sound game
@@dustinherrick7205 lol true we need this as message notifications
@@flowerofash4439 I did that and everyone laughed so hard when my phone rang " holee sheet..what da hell "
HOLEY SHEET!
At 5:44 the slowmotion is hilarious we can hear the machine sound like a bell 🤣
no way the intro just
?
This is actually incredibly dangerous without proper safety measures, even though neither of them were hit by the shards directly. You're likely to have lung problems later in life; even though they let the dust settle, there are still tons of microparticles in the air. The only way to safely sand or explode glass, is suspended in water. And if it's not in water, then run a misting spray of water in the room afterwards, for a decently long period of time. This is to weigh down the silicate particles in the air, and ensure that they are on the ground, rather than in your lungs. Best practice is to have a HEPA compliant air filtration system always running in rooms where this kind of crap happens, and change the filters after every aerosol-prone endeavor.
Sad these comments go unnoticed because they're the most important
@@paladinkhan
Yes because im sure tons of people have access to a hydraulic press
Also. It takes quite a bit of inhaling the dust for it to cause lungs problem bud. Quite a bit. A few experiments like these won’t cause lung problems. If you were to do it continuously for a couple months maybe. For a couple years? Yes. But not doing the experiment only a few times.
@@cadenbrown7407 Silicate powder is dangerous in the lungs in any amount. Doing it every day will absolutely cause immediate problems,but even one exposure can lead to issues not unlike asbestos exposure; years later, it's gonna crop up as a bad source of lung damage, and damage to any other parts of the body that any amount of it that may have made it past the lungs and into the blood. The people behind this channel have shown a repeated lack of care for finer safety details such as this, so I fully expect that the things they've exposed themselves to will likely bite back in a few years' time.
@@kmemz Lol. You are a moron. Silicosis typically takes 10 or more years of exposure to develop. It's highly unlikely that these people will have any lung issues due to this one small exposure. It's not like asbestos, as you claimed. One small exposure is not known to be harmful. Quit making things up.
3:18 That is the best Finnish "holy shit" I've heard.
5:28
@@ByteMe619 LOL
Actually laughed out loud at that lmao
Hoo Lee sheet
I just keep on replaying the 5:28 one and 3:18 one
Homie almost created another universe blasting ours apart in the process.
I’ve always loved these videos, but prince rupert drops have to be my favorite thing to watch being pressed 😳😮
“I’m guessing 7 tons my wife thinks 6 tons “
Prince Rupert Drop “ am I a joke to you “
I guessed 60 kg LOL
I thought he said "my wife weighs 6 tons"
This is not how you use -> "
@@emberhydra7621 you bothered to reply to a comment from two weeks ago to incorrectly correct them? And I thought I had seen the extent of TH-cam comment stupidity
@@emberhydra7621 thank you for the unnecessary input, do you have anything else to say?
11:28 "TAHRRDINTOOLAH " That's the pronunciation I'm going to use from here on.
That is the most Finnish sounding pronunciation of a word ever.
@@dewoitine I'm sorry to tell you this, but most of us actually say it like.. tarantula 😂
@@shauxuhrwilsongrim no ur wrong its a government consperacy
Yall got me laughing
I knew those drops where hard but no idea they were like that! Absolutely amazing. If u just tat tail they just shatter it's quite a phenomenal thing.
Incredible, love this channel
You guys should wear a respirator while crushing these! Also maybe some sort of vacuum system to help suck the glass particles from the air. Amazing experiment!
You should check out their fire extinguishers and give them a citation post dated for the expiration date on the inspection card. Just in case they start thinking about ignoring fire suppression system inspection and just looking at the gauge on the side and making sure the trigger hasn't rusted solid yet by themselves and burning themselves and their families alive while carrying around an unsafe fire extinguisher that doesn't work because it's been 366 days since a serious professional looked at the thing and said "gauge is good trigger hasn't rusted off" as evidenced by the inspection tag last initialed a year and one family broiling day ago. A family broiling day they asked for. I keep a fire extinguisher in every single room and I actually have them inspected a month earlier every year cost me a little bit extra money but it's worth it to know that I didn't kill my family by being unsafe. Are you allergic to peanuts too? I am. Dm me if you want to talk about it and maybe hang out some time you sound awesome.
Russ E hahahahahahahhahaa
I thought the same thing vaporized glass in your lungs.
@@michaelwhittman1956 all I have to say is, the fuck?
Michael Whittman wait wtf did you type before the edit lol, it’s unrelated to the comment now
Spin the bicycle tire until it explodes, it was a failed video that needs to be revived
Xd
lel
Well hook it up to a car engine and let the gearing do the work
@@peterzingler6221 It won't go fast enough
Wasn't expecting to hear Thor's Hammer playing.
I love how excited your partner is!
The big drop shattered quickly because if you watch the video in slow motion you can see the tail was receiving pressure before the main part of the drop putting extreme lateral pressure on it causing it to shatter prematurely.
I was gonna say the same thing.
This is correct. I was calling it before it exploded
Indeed! I was a bit disappointed because I was really curious about what pressure the large drop could withstand. Still, these videos are strangely addictive! 😁
Hi:
Two thoughts: 1) film this in the dark, I bet there is a big flash (triboluminescence) and 2) put some sausage in the path of the debris, like if you had a finger there (ouch !).
Cheers, Mark * * *
Mark Beeunas I think there’s a visible flash when the 67 tons explodes the second drop. At the very top of the drop.
i rlly wanna see both of these things happen
Good comment
I doubt it. Glass is not quartz, there are impurities that ruin its piezoelectricity, after all, quartz is crystalline while glass is amorphous, and that right there is the problem. And triboluminescence is just visible electrical discharges and without the electrical potential generated by piezoelectricity, there is no triboluminescence. But it should be even worse for Prince Rupert's drops, because of the rapid cooling in their formation, it should be even more amorphous than regular glass, in other words even on the tiniest scales there should be no chance for any crystals to form.
Fucking interesting
“Yah, we have short break now” Gotto make sure everyone is alive 😅
8:54 the shape was fine, the tail was compromised due to poor positioning. Tail was compromised hence shortest time of explosion.
Press: 38720Kg
HPC: no *backs off*
That was halarious and 100% understandable.
@Sasquatch th-cam.com/video/Lrr_VVtyUA8/w-d-xo.html
For the big drop, it looks like the tail might have been stressed as the drop sank into the steel, causing an easier break?
very likely as the tail gets exponentially weaker
Was thinking the same thing
I believe he recognized that
I noticed that too. Hopefully, he revisits the big drop.
I scrolled down hoping someone had mentioned this. I noticed the tail being stressed before it broke and felt my heart sink as it did. That drop would have withstood so much more had he positioned it better to ensure no direct pressure was applied to the tail. Rupert's drops are incredibly strong at the head, but their tails are like an Achilles's heel. This needs to be redone and reuploaded for science... or for views.
I could just hear "Buttercup" playing in my head as the press started coming down
For some reason i think i can apply this as a plot device for my future fanatasy story 💕
"we take short break now"
Fair enough, fair enough.
At least this guy has personality in his channel, I can’t think of one other hydraulic press channel that goes this in depth and has commentary
There are other channels
Except for the comment about the orange tarantula. " It is pretty dangerous and we have to destroy it"....sadly.
😂 how many hydraulic press channels are there?
also this is the only hydraulic press channel that will go out of their way to damage their own press by trying to smash something, most people will stop at a certain pressure but this guy just goes until it breaks or his press breaks
@@steelpenfiddler5333 a lot of copy cats
That was awesome.!! Thank you for sharing this with us.
I think the 3rd one ( the largest Prince Ruperts Drop) broke early because the tail hit. When you started compression the tail started dropping down. I think the tail touched the pedestal.?
Again, great show.
Gente, o vídeo começou e eu tô achando q tô no canal da Paula Marisa kkkkkkkkkk música sem Copyright é foda kkkkkkkk
Great video! And it must be really cool to use this big machine :)
Prince Rupert's Drop: *I'm the hardest of all*
Nokia: *hold my beer*
Ichael Gaming Hi-Point: move over, kid.
@@jamesharding3459 lol
Me when I see a massive spider: 3:18
When it enters hyper speed: 5:28
Lmaoooooo
I can completely agree
The spider: 11:29
SIenderplier oi
Thanks for taking the time to make this video and satisfying my curiosity!
I wonder if there was more of an extreme temperature variation during creation?
Ok ok. You got me with this one. I'm sure being subscribed will mean lots of quality entertainment...and science!
the big one broke quickly because the tail was down and cracked first.
I want to second this point. The drops are very fragile if you apply lateral pressure to the tail. It may withstand over 30 tons in the press but you could shatter it in a similar fashion using your bare hands if you just snap the tip of the tail off.
@@philsangster677 I wouldn't recommend doing that tho because you would get small glass shards everywhere
Thanks for commenting that so I don't have too
Yes the tail got caught on the edge. They should redo this and position it properly
I was wondering if that was the case, watched the slow mo shot a few times trying to catch where the break starts but its so fast. Doesn't look like there was enough room to allow for the depression in the steel without the base of the tail making contact
This is the first time I've legitimately feared for you guys, those are massive drops, and the energy in the small ones is already insane.
I would have never thought Rupert's drops would explode with that king of force.
I love how much fun this couple have crushing things, they're like big kids. You know we all wanted to be able to do something like this when we were little. Thankfully we have this channel!
There should be a competition to see who can make the strongest drop.
The fear that comes across your heart when you see a glass drop actually displaying tensile strength for a moment under several tons of pressure.
Compressive strength is opposite to tensile strength, just saying
The Slow-mo Guys need to see this for sure
I would not go into that room without a nice face mask. PURE GLASS DUST 💨
Andrew Ds TV “we have waited for the dust to settle”
@@hydrohedinvictus8697 I would imagine you did wait for the dust to settle. Its just amazing how powder fine it was.
Vaporized into dust just like the twin towers
@@dannywilliams3764 yikes
@@dannywilliams3764 r/cursedcomments
when it reached 30 tons I backed off my monitor for some reason, you are really brave to do that
The large metal base in the slowmo is the bell that tolls for every lost drop
You just created a big bang for some subatomic star systems within it.
I feel like the big one broke so easy because the tail part was smashed first.
Yep. Same for the medium one if you look carefully. The dent in the steel made the bolr come close, so it touched the tail, close to the drop.
That is exactly what happened.