Single phase double capacitor motor connection|Centrifugal switch in single phase induction motor
ฝัง
- เผยแพร่เมื่อ 1 ธ.ค. 2022
- Single phase double capacitor motor connection
Centrifugal switch in single phase induction motor
Single phase motor connection
Motor capacitor connection
1 hp motor winding
• 1 HP motor winding | S...
Mixer grinder field coil winding
• Mixi field coil windin...
Mixer grinder armature change
• Preethi mixie repairin...
Nebulizer machine repair
• Nebulizer repair|Compr...
Ceiling fan winding repairing
• Crompton ceiling fan r...
5 hp motor winding
• Three phase motor wind...
3 please motor winding connection
• 5hp 36 slot motor wind...
#centrifugalswitchconnection
#motorcapacitorconnection
#singlephasestartingcapacitorconnection
#centrifugalswitchmotorconnection
#howtoconnectcentrifugalswitch
#centrifugalswitchsetting
#2hpmotorconnection
#singlephaseinductionmotorconnection
#2hpmotorcapacitorconnection
#motorwinding
#centrifugalswitch
#Hipowerelectricworks
Explicaciones claras, fáciles de aprender. Dios lo colme de bendiciones.
your video is the best so far i seen
how to find running and start wires
i have them all grey
@@ninobeliali1849 Starting running lead wires can be sensed by measuring ohms with a digital multimeter,
For example...
Two leads ohm's - 2 ohm's
Other two leads - 5 ohm's...
(2 ohm's running winding )
Running winding will have lower ohm's and the starting winding will have higher ohm's.
@@Hipowerelectricworks i got the two centrifical switch wires correct
have two thicker wires and two thinner wires
still can't find out witch ones are run
following you diagram,its very clear when the two run wires are determined
@@Hipowerelectricworks got it now
thick wires are the running ones with low oms
thanks
Hi nice demonstration
Nice
Thankyou very much brother.... Meru telugu vara sir
Thank you
Very nice गुरु जी ❤❤❤❤❤❤❤
Thank you
Now I get it. Thank you very much
You're most welcome
Good job ❤
ကပ်ပစီတာ ကောင်း မကောင်း ဘယ် လိုစမ်း ရပါလဲဗျာ " ကျေး ဇူး ပါ
Good job dear..❤❤❤
Thank you
Super explaining
Thank you
good job 👍🏻
Thank you
What's the name of that spray the help to loosen bot
WD 40
Thankyou
Keep watching my channel
Thank you
Thanks
You're most welcome
Yekkada meedi chepthara sir
How do you reverse the direction of rotation
Change the connection of the running lead wire.
Separate the running lead from the lead where the starting and running lead are joined and attach another running to it.
so there is 6 wires from motor on this, what if i only have 4 wires, how do i connect ?
There are four wires from the motor winding and two wires from the centrifugal switch.
It's a double capacitor motor connection (starting capacitor and running capacitor)
Sir ,not ok ,,, phase , neutral ( inter change)
Phase, Neutral inter change no problem