I thank you from the heart of the heart. Your good faith helped me so much. I appreciate you and even this beautiful work you have made available to us. Thank you very much. I like you ❤.
Hello sir, इस कनेक्शन में इनर से आउटर वायर का जम्पर है। इस कनेक्शन से मोटर में क्या इफेक्ट पड़ता है। एवं सीरीज कनेक्शन यानी इनर से इनर का एवं आउटर से आउटर का जम्पर होता है। तू तो मोटर पर क्या इफ़ेक्ट पड़ता है। Plz reply me sir
यदि मोटर 6 कॉइल के साथ 1440 rpm है, तो कनेक्शन वीडियो में दिखाए अनुसार किया जाना चाहिए। यदि बाहरी लीड को बाहरी लीड से joint वाला कनेक्शन 6 कॉइल है तो यह 2800 rpm होगा।
There are ways to find motor winding data but none of them are perfect. A suitable wire size and turns is used when the motor is manufactured at the factory. When we are rewinding the motor it is best to use the same size and turns of wires that were on the motor before
I noticed that the coils you use are not only the proper length but in perfect order. Meaning, all the strands are side by side and when I make a coil using my Chinese wire winding machine they overlap. Some overlap others and when you try to put them in the slots it makes it harder. How do you make your coils????
Bai table fan, single phase grinder motor coil to coil joint nil only running coil 2lead, starting coil 2lead edukum method one video uploaded seyyungal please
8 coil table fan winding and connection full video 👇 th-cam.com/video/KUNhy_-i6WI/w-d-xo.html 4 pole 1440rpm motor connection (The same connection wet grinder motor)👇 th-cam.com/video/c9sYdM2YRu0/w-d-xo.html
Rated line current is 13.5 amp. Therefore rated per phase current is 7.8 amp. 14 SWG 2mm dia wire is required for stator winding. The wire in the video indeed looks like 14 SWG 2mm dia. 22.5 SWG is wrong. 22.5 SWG is approx 0.75mm dia and will pass 1 amp only. The wire in the video is not 22.5 SWG
4 parallel 22.5SWG windings in 4 layers will pass 4-4.5 amps only. The phase current in this case is approx 8 5 amps, so you need 17-18SWG wire . SWG 22.5 is 0.65mm dia. The wire shown in the video is at least 1.5mm dia.
There are ways to find motor winding data but none of them are perfect. A suitable wire size and turns is used when the motor is manufactured at the factory. When we are rewinding the motor it is best to use the same size and turns of wires that were on the motor before
Концентрична по фазна укладка робить професіонал бачу. Я катушки нн звязую кожна катушка в данний момент трійка є дуже багато ефективнішек укладок це вже стара укладка
This is wrong connection bro please check phase angle 4 pole machines total electric digress is 360×2 pair poles=720÷36 slots =20°/ slot so 6 slots complete 120° 7 number slots are start b1 ❤
There are ways to find motor winding data but none of them are perfect. A suitable wire size and turns is used when the motor is manufactured at the factory. When we are rewinding the motor it is best to use the same size and turns of wires that were on the motor before
Whatsap channel link 👇
Follow the Hi power electric works channel on WhatsApp: whatsapp.com/channel/0029VaAIZwVHLHQgi7izTf1S
Power supply 220 440 volts?
440 volts
@@Hipowerelectricworks thanks 🙏
Coils Arranged at 120Degee, Start To End Series Connection ,No B Crossing....OK Sir...👍
I thank you from the heart of the heart. Your good faith helped me so much. I appreciate you and even this beautiful work you have made available to us. Thank you very much. I like you ❤.
congratulations for your effort
Thank you
Super 👍 winding bro ❤❤❤
Thank you so much Sir... you're the best.....
Very nice. Congratulations.🙏👍.
Very good work 👍
Good camera and explain
Supper bro 👌👌👌👌👌
Very nice vdo, good rewinding work
Thank you
Hi bro nice work
Thank you
Nice job, good info. Many thanks!
Nice brother
Thank you
Hello sir,
इस कनेक्शन में इनर से आउटर वायर का जम्पर है।
इस कनेक्शन से मोटर में क्या इफेक्ट पड़ता है।
एवं सीरीज कनेक्शन यानी इनर से इनर का एवं आउटर से आउटर का जम्पर होता है। तू तो मोटर पर क्या इफ़ेक्ट पड़ता है।
Plz reply me sir
यदि मोटर 6 कॉइल के साथ 1440 rpm है, तो कनेक्शन वीडियो में दिखाए अनुसार किया जाना चाहिए।
यदि बाहरी लीड को बाहरी लीड से joint वाला कनेक्शन 6 कॉइल है तो यह 2800 rpm होगा।
@@Hipowerelectricworksयानी मोटर 2800rpmमे वर्क करेगी
@@Hipowerelectricworks thanks you very much sir👍
@@nirajlilhare539 6 coil 2800 rpm motor winding and connection 👇
th-cam.com/video/N6tKKxA4uwk/w-d-xo.htmlsi=jln9-GVOC1cnNy_a
Thanks. ♥Very nice
Hi
very very nice
🥰🥰🤗🤗
Very nice sir
Super...
Impressive 💪
Thank you
@@Hipowerelectricworks how to terminate inner and capital outlet leads is not showned on vedeo.
Great work
Thank you
خیلی عالی❤❤❤❤❤❤❤
Nice bro
Congratution
Very nice ❤
Smart engineering motor rewinding industry.
Very Nice
Good job well done
Thank you
Why we are taking 3 different set of coils with same number, As you mentioned in a comment 34 x 4= 136, can we take all 136. Turns in a single row
SWG - 22.5 four layer
1 set in 3 coil series
One coil turns - 34×4 layer 22.5 = 136 turns
Super
Nice 👌👌👌
Super bro
Educative thanks
Very nice work.
Thank you
Thats why i love electricity...
Very nice
Good one👍👍👍
Thank you
It very amazing ,
Thank you
Thanks you ❤❤
Excelente muy profesional
Thank you
Question: how to determine coil size when rewiring an electric motor!
There are ways to find motor winding data but none of them are perfect.
A suitable wire size and turns is used when the motor is manufactured at the factory. When we are rewinding the motor it is best to use the same size and turns of wires that were on the motor before
I noticed that the coils you use are not only the proper length but in perfect order. Meaning, all the strands are side by side and when I make a coil using my Chinese wire winding machine they overlap. Some overlap others and when you try to put them in the slots it makes it harder. How do you make your coils????
@@Rstifleable Watch this video from the second minute 👇
th-cam.com/video/_6UaOK1nP9A/w-d-xo.html
Bai thanks mixie field winding farmer wood or material made eppadi seivathu video posted
Ok
Good one
High power bhai thora music ke saath dance bi kiya karo
Nice work
Thank you
Bai table fan, single phase grinder motor coil to coil joint nil only running coil 2lead, starting coil 2lead edukum method one video uploaded seyyungal please
8 coil table fan winding and connection full video 👇
th-cam.com/video/KUNhy_-i6WI/w-d-xo.html
4 pole 1440rpm motor connection
(The same connection wet grinder motor)👇
th-cam.com/video/c9sYdM2YRu0/w-d-xo.html
👌ok
Thankyou sir
Continue watching my videos
Thank you
Great video brother👍keep it up.but i am not clear about those numbers 1-8*34 etc,can you please help explain about those numbers...
34×4*136 turns
SWG 22.5+22.5+22.5+22.5
Rated line current is 13.5 amp. Therefore rated per phase current is 7.8 amp.
14 SWG 2mm dia wire is required for stator winding. The wire in the video indeed looks like 14 SWG 2mm dia. 22.5 SWG is wrong. 22.5 SWG is approx 0.75mm dia and will pass 1 amp only. The wire in the video is not 22.5 SWG
Wire guage 22.5 ×4 layer
Not a 1 layer
4 parallel 22.5SWG windings in 4 layers will pass 4-4.5 amps only. The phase current in this case is approx 8 5 amps, so you need 17-18SWG wire .
SWG 22.5 is 0.65mm dia. The wire shown in the video is at least 1.5mm dia.
Very good. Self explantory Biut it will be better if some explanation is given orally Avoid the unpleasant music
If you can please do for concentric type winding for 3 phase induction motor
Ok bro
Sir chane waiding jaruri hai kya 3 phase ko satating raning ki tahra kar sakate hai
Yeh 3 phase concentric winding he
very good
Thank you
Your video is very beautiful.
What type of camera.. clarity..?.. please link
👌👌👌👌👌👌
bro table fan motor rewinding viedio cheyyamo
8 coil table fan winding video 👇
th-cam.com/video/KUNhy_-i6WI/w-d-xo.html
Please how to determine/calculate the number of turns?
Thanks in advance.
There are ways to find motor winding data but none of them are perfect.
A suitable wire size and turns is used when the motor is manufactured at the factory. When we are rewinding the motor it is best to use the same size and turns of wires that were on the motor before
@@Hipowerelectricworks thanks 🙏🏾
Концентрична по фазна укладка робить професіонал бачу. Я катушки нн звязую кожна катушка в данний момент трійка є дуже багато ефективнішек укладок це вже стара укладка
Good
Very well ❤ but A1 A2 B1 B2 C1 Ç2 kis kis ky sath connection dyna hy taki three phase nikly baher
Es motor se 6 lead wire nikalte he aur 6 lead wire starter se motor Tak aathe he
Can you give the name of this insulation paper and from where I can buy it?
It's called Nomex paper class F insulation and I buy it from the shop where I buy the winding wire and it's also available online
Motor winding ka channel konsi categry me aata hai
Education or how to style
me in donon ka upayog karata hoo
Ñice mecenical
how many wires in hand
4 wire
Jaise bina starting ke running per chala sakte h vaise hi bina running ke starting per chala sakte h
✌️
36 cave passo 1-8-10-12 rpm 1400 4 poli trifase collegamento a stella o triangolo ok?
Sir it series connection
Correct Sir... Because Each Coil fixed in 120 Degree....end to start Series Connection &No "B" Cross.....🙏
Show de bola.
thanks
Keep watching videos
Thank you
Nice
Thank you
Sorry*simply how to terminate leads outer and inner.?
Is that copper or Aluminum 🤔
Copper
Good question 😂 bro I think this is almunium 😂
Can we do chain winding type??????
It can be done like chain winding but it will be a little difficult to compact the winding
This is wrong connection bro please check phase angle 4 pole machines total electric digress is 360×2 pair poles=720÷36 slots =20°/ slot so 6 slots complete 120° 7 number slots are start b1 ❤
@@firozjamani8218 This connection is correct bro it is called three phase half coil winding and connection . it's 1440 rpm
@@Hipowerelectricworks right but phase angle is wrong
How do you calculate the size of those Conductors?
Buen trabajo amigo
Thank you
Customer se 10hp motor winding ka Kitana charges lete ho
I want to know the winding price of the motor with copper and without copper. Can you share the details
What is the wire gauge?
SWG - 22.5+22.5+22.5+22.5
H winding is easy but chain winding mushkil ha
What do u mean by core Dia and1 -8 what do u mean plz explain how the words are meaning step by step and how to recognize the things
Dear sir, How to calculate the wire gage.
There are ways to find motor winding data but none of them are perfect.
A suitable wire size and turns is used when the motor is manufactured at the factory. When we are rewinding the motor it is best to use the same size and turns of wires that were on the motor before
Bro anni three phase connection same untada
agla part kab aya ga
Ye pura video he
Bhai 5 hp moter rewinding me kitana time lagata he 1440rpm 3phase
👍
Winding price
Sir mery pass 4 hp ki single phase monoblock moter hy or mujy us ko three phase ma rewind krna hy too us ka kia trika ho ga
Coil turn
34 turns
( 34×4 wire = 136 )
how to calulate turns ?pls
I wana be your student how i can be
This channel has videos on winding and connection of all types of motor ,fan ,mixer grinder etc..
👍👍👍👍👍👍👍👍👍👍👍
🙏🙏🙏🙏
👍👍👍
Is motor mein kitne coil Lage aur Koyal ka time bataya jaaye kitne chakkar karke coil hai
ভাই আমি এভাবে একটা ৭.৫গোরা মটর বাধানোর পর এক মিনিট পলার পর কন্টাক্ট টিউব করে কেনো একটু জানালে উপকৃত হবো
Original data hai
Yes original data
Havells 10 hp
Muy bien es de 380v
♥️♥️♥️😀😀😀😀