Those who can read have a clear advantage, also with this topic, because everything is written there, simple and self-explanatory, it`s as simple as that.
I just bought the Rega IO to use while I wait for the Zen triode 34I.6 integrated amp. I'm trying to set up a new vinyl system, I can afford 1 Heresy III for now, and intend to be able to get a 2nd by the time the Decware Rachel is ready. Until Then can I run the I/O with just one Klipsch horn speaker in mono?
@@vintagestereo no I'm going to pay off the amplifier over at 18 month. Do you know the answer to my question how to hook up one speaker to stereo amplifier
I have a question related to this. Last year I changed my amplifier to a more powerful one. When I turn it on, after the speaker relay clicks in, I now hear some soft shh-wind noise trough my speakers. This is without playing any music. Where does this noise come from? Can I reduce that noise with better cables?
I don't think better cable's will change anything to do with this noise, all you should hear from the speakers once the relay's click is music, any strange noises may indicate a fault within the amp.
Great video! It's been a very long time since I did this... I wasn't putting the negative to negative. I noticed they work either way you put them but I want to make sure to have control of the right side and control the left side and I don't want to Kris cross it. 2 wires from the speakers to black and red!🤦♂️ Thank you Sir! Always remember, you can't please everybody. But I could understand you enough to get the job done. Thank you!
I own a good number of headphones/iems and the corresponding amps/dacs and I have no idea how speakers connect to stuff.. so yeah, I think this video is warranted.
Be sure to consult the amplifier manual or research your amp model online to be sure it can be bridged. If your amplifier does not claim to be able to bridge, don't try to bridge it. It may already be bridged internally, and you could cause damage to your amplifier., this is how you bridge an amplifier From the wires coming out of the speaker, connect the positive speaker lead to terminal A (the positive for channel 1) and connect the negative speaker lead to terminal D (the negative for channel 2) if your amplifier is a 4 channel amp just do the same thing
Im relatively young 27, i was just given new surround sound speakers 4 towers and a small sound bar, they are sony, but have a 4.2mm dual pin plastic connecter on the wires and the amp is an old kenwood like late 90s early 2000s old, its my familys old one. I connected the speakers but got no sound, are the speakers just too new for the amp?
Are you related to the guy who made this video?. Relatively young at 27 & you can't even set up a stereo. I was doing that at 14 years old, by the time I was 27 I was married & 3 kids & owned seperates technics hifi . Go out with your single man's money & buy a new half decent system for half a months wage. I ain't rich either. You wasn't given that system he just couldn't be bothered to go to the tidy tip.
Went a bit off track for half the video but we got to what we wanted to watch. Next time maybe you can talk about bi wire v bi amp and show us a family wedding video. I was waiting for you to follow the wires where the speakers are connected so we had the complete picture. I don't know about those young people you spoke of not knowing much today but I think us oldies can blubber on then forget what we are on about which I think is exactly what's just happened. Nice effort but don't give up your day job.
What about connecting four speakers to an amp with just one speaker out? I currently just double wired them, but I'm over the max watt output, so I probably need some sort of signal amplifier if I want the full pawer of all four speakers, right?
When you put 2 speakers on one speaker connection and both speakers are 8 ohm they will as 2 togheter draw 4 ohm from that 1 speaker connection. If you use 2!speakers drom 4 ohm you will draw 2 ohm…. Most amplifiers can’t draw 2 ohm, you will blow up the amp on louder volume levels
Hi, I have a vintage amp and my output is 16 ohms. I have a single woofer ( 16 ohm) and Tweeter (16 ohm) hooked up to the amp through a cross-over. My tweeter is toast so I bought a new Tweeter from Pyle ( PH-391) but it is only 8 ohms. How do I wire this into my set up. My cross-over has a 15 ohm and 33 ohm resistor along with a 3.0 uf Capacitor. Do these new tweeters even need a cross-over ..I am confused. Any help appreciated.
How important is it to connect the speaker cable - to the - input from the amplifier? Does that matter? And why? Not talking about the channel a/b, im talking about the actually cable from 1 speaker. Thanks! :)
Bloody hell Andrew! I just watched an American TH-camr telling me "How to eat Pork and Beans," and now you're telling me how to connect speakers to an amplifier! Chew and swallow your Pork and Beans, and ensure your speakers are in phase! It's NOT Rocket 🚀 Science! 😂
Can i connect or use the a/b terminal for my bookshelf speaker ? Coz it has a four binding post ... And im planning to bi amping it by using the a/b terminal of my amp
Hey, Thanks.. Tell me please, If i want to connect only single speakers to a single channel... How do you do it? Whats the possibility combination? Thanks
don't cnoonect all your speakers in single channel it can ruin your amp if you want to connect only one speaker in a single channel just hook it up to any speaker terminal of your amplifier
Small question, is it possible to run the right speaker from the A terminals and the Left speaker from the B terminals and set the amplifier to A+B is there any benefit to this? Thanks I look forward to your response.
Can sombody help me. When i put my aux from my amplifier in my tv (headphone input) i have this sound when it's silent in a movie is there something to fix it??
Hi i need a suggestion, how about an 5.1 amplifier which has 85 watt per channel with 5.1 set of 2 tower speaker with subwoofer capacity capacity is 180 watt per speaker& 1 center speaker 120 watt & 2 surround speakers 85 each. Is this a overload to the amplifier or will it be ok for a good clarity music & good life for the amplifier???
If both A and B are used, does that mean the impedance is changed ? like if an amp is using 8 ohm for 2 speakers, does that mean it will then changed to 4 ohm if using 4 speakers ??? How about the wattage ? if the amp is rated 65 watt 8 ohm per channel, if A and B is both used does that mean 65x4 or 65 is divided by two for A and B ?
didn't actually show the method of connecting the wires? just the completed job? not what I was looking for, never having seen the type of connectors before
I wonder how i can connect my earphones to my amplifier? Is there a way to connect my 3.5mm jack to that red black knob? Im experimenting lol To sum it up, I want to connect my earphones as if its a speakers. I wonder how is that possible
Hello, as I see you used cables that are not identical and it's not acceptable when you do bi-wire connection. They have to be exactly the same with identical lengths.
This is a 5 minute video and 3 minutes in I still have no idea how to connect this damn thing!!! Please don’t make any more videos!! This was a waist of my time! Thanks for nothing
When a person goes to you tube to find out how to do things we don't want wont to hear about your nephew job you give out too much information where a person lose interest. Just get to the Point!,
Is this is a storytime video about a smart nephew sales guy or how to connect wires to a speaker? People should get to the point of the topic of the video because TIME IS EXPENSIVE!!!
Do you have niece as well ? Tell about her as well please along with other family members as well. People want to listen. Hope everything good. Guy is smart very smart which tells you are not smart at all. Why should we listen to Harry Potter story. Are you ok?
what is this a plug for your nephew this is not suposed to be a blog i wana know how to connect my speakers not know your pride still lives in his momma house dude come on
Love the wholesome tangent on his nephew. Hope he knows his uncle loves him.
I wanted to see how to hook up my speakers but i am sitting here listening to you ramble on about your family 😔
clicked on for same reason
but his nephew is a good guy, whatsamattawithyou.
For real who give a shit about IT shit you didnt explain shit
Thank you
😂😃😆
came for the explanation, stayed for the wholesome story
😂
I was better off before watching this. Now I'm totally lost. Thanks for your lovely family story.
LOL
You made the entire video without showing how to put the wires in. Nice
Glad I saw your comment before I watched.
Title should be: story about my nephew
I actually watched to the end thinking this guy was gonna redeem himself and give us an actual tutorial. SMH
I scrubbed through, this is worthless.
Damn Cheryl
Jump to 2:34, for some good info
Tf bruh, then you miss all the info about his nephew
How's he getting on? Did he get the promotion? We needs to know😁
Thanks for clearing it up!! (Great story about the nephew)
that's such a correct describtion:D
How is the rest of your fam 😂😂😂
I swear to god 😂😂😂😂, like cmon vintage i came to fix my speakers not to be a psychotherapist.
@@manscv7037 you know what youre comming for on this side of the internet 😂😂
@@leseton I thought i was ready for this side but i was wrong bruh 😂😂🤦🏽♂️💀.
Those who can read have a clear advantage, also with this topic, because everything is written there, simple and self-explanatory, it`s as simple as that.
I just bought the Rega IO to use while I wait for the Zen triode 34I.6 integrated amp.
I'm trying to set up a new vinyl system, I can afford 1 Heresy III for now, and intend to be able to get a 2nd by the time the Decware Rachel is ready. Until Then can I run the I/O with just one Klipsch horn speaker in mono?
???you won the lottery,?
@@vintagestereo no I'm going to pay off the amplifier over at 18 month. Do you know the answer to my question how to hook up one speaker to stereo amplifier
mono playing with 1 speaker is not a problem
So how do we wire the actual wire into that type of connector?! Is your nephew gonna show us that?
OMG I hope this guy will adopt me and be my uncle too!
and to make sure the wires are right or you get much less bass if not in phase
I have a question related to this. Last year I changed my amplifier to a more powerful one. When I turn it on, after the speaker relay clicks in, I now hear some soft shh-wind noise trough my speakers. This is without playing any music. Where does this noise come from? Can I reduce that noise with better cables?
sorry but you shouldn't hear any strange noises coming from the speaker's after turning it on, is the volume control set on minimum ?
@@markrowe8824 Yes the volume is on minimum, actually I can move the volume to any level, it does not affect it this sound
I don't think better cable's will change anything to do with this noise, all you should hear from the speakers once the relay's click is music, any strange noises may indicate a fault within the amp.
Great video! It's been a very long time since I did this... I wasn't putting the negative to negative. I noticed they work either way you put them but I want to make sure to have control of the right side and control the left side and I don't want to Kris cross it. 2 wires from the speakers to black and red!🤦♂️ Thank you Sir! Always remember, you can't please everybody. But I could understand you enough to get the job done. Thank you!
Will you get better sound using 4 speakers and 2 subs than 2 speakers and 1 sub?
hi ,, cable is marked an arrow , do i have to follow that direction, from amp to speaker ?
Hello where is the B channel speaker location ? Is it on the sides of the TV or on the rear Back ? Please let me know.
I own a good number of headphones/iems and the corresponding amps/dacs and I have no idea how speakers connect to stuff.. so yeah, I think this video is warranted.
Nice vid. Question: can i bridge such kind of amplifier, so i double the output power? And how to connect if possible?
i hope one of my subscribers can answer you, I never expierience with 2 amps before
Be sure to consult the amplifier manual or research your amp model online to be sure it can be bridged. If your amplifier does not claim to be able to bridge, don't try to bridge it. It may already be bridged internally, and you could cause damage to your amplifier., this is how you bridge an amplifier From the wires coming out of the speaker, connect the positive speaker lead to terminal A (the positive for channel 1) and connect the negative speaker lead to terminal D (the negative for channel 2) if your amplifier is a 4 channel amp just do the same thing
Im relatively young 27, i was just given new surround sound speakers 4 towers and a small sound bar, they are sony, but have a 4.2mm dual pin plastic connecter on the wires and the amp is an old kenwood like late 90s early 2000s old, its my familys old one. I connected the speakers but got no sound, are the speakers just too new for the amp?
Are you related to the guy who made this video?. Relatively young at 27 & you can't even set up a stereo. I was doing that at 14 years old, by the time I was 27 I was married & 3 kids & owned seperates technics hifi . Go out with your single man's money & buy a new half decent system for half a months wage. I ain't rich either. You wasn't given that system he just couldn't be bothered to go to the tidy tip.
Are you polish? Im asking because I heard media markt which is a polish shop
Went a bit off track for half the video but we got to what we wanted to watch. Next time maybe you can talk about bi wire v bi amp and show us a family wedding video. I was waiting for you to follow the wires where the speakers are connected so we had the complete picture. I don't know about those young people you spoke of not knowing much today but I think us oldies can blubber on then forget what we are on about which I think is exactly what's just happened. Nice effort but don't give up your day job.
What about connecting four speakers to an amp with just one speaker out? I currently just double wired them, but I'm over the max watt output, so I probably need some sort of signal amplifier if I want the full pawer of all four speakers, right?
When you put 2 speakers on one speaker connection and both speakers are 8 ohm they will as 2 togheter draw 4 ohm from that 1 speaker connection. If you use 2!speakers drom 4 ohm you will draw 2 ohm…. Most amplifiers can’t draw 2 ohm, you will blow up the amp on louder volume levels
Also dont connect a 4 ohm and a 8 ohm togheter in 1 speakeroutput
Hi, I have a vintage amp and my output is 16 ohms. I have a single woofer ( 16 ohm) and Tweeter (16 ohm) hooked up to the amp through a cross-over.
My tweeter is toast so I bought a new Tweeter from Pyle ( PH-391) but it is only 8 ohms. How do I wire this into my set up.
My cross-over has a 15 ohm and 33 ohm resistor along with a 3.0 uf Capacitor.
Do these new tweeters even need a cross-over ..I am confused. Any help appreciated.
How important is it to connect the speaker cable - to the - input from the amplifier? Does that matter? And why? Not talking about the channel a/b, im talking about the actually cable from 1 speaker. Thanks! :)
Go straight to the point
ive pioneer A-656mk2, can i connect klipsch R-51M with it?
yes
@@vintagestereo pioneer A-656mk2 per channel 60watt and klipsch R-51M 85watt will not be a problem?
Where do I put my bass speaker , boss ?
Bloody hell Andrew! I just watched an American TH-camr telling me "How to eat Pork and Beans," and now you're telling me how to connect speakers to an amplifier!
Chew and swallow your Pork and Beans, and ensure your speakers are in phase!
It's NOT Rocket 🚀 Science! 😂
Young people really don't know anything about this stuff, it's my 3rd best watched video
what is channel? is it the speaker itself? im having trouble connecting wires on my jbl studio 2 series loudspeakers. could you help me?
Can i connect or use the a/b terminal for my bookshelf speaker ? Coz it has a four binding post ... And im planning to bi amping it by using the a/b terminal of my amp
Suggest some low price amplifiers for studio purpose to buy online please, it'll be of great help
The video starts at 2:46
I have a PIONEER SA 6700,and 2 speakers(8 ohm)....How i can connect properly the speakers?Using only A row,or B row?How i can connect in A+B mode?
How you set the wire ?
Your very far from the title..
And you got voice like a bass
what is color white and blue wire? where is positive and negative?
Hi..bro..I have only 2 speakers but I need your tips how to fix into amplifier karaoke.
Hey, Thanks..
Tell me please, If i want to connect only single speakers to a single channel... How do you do it? Whats the possibility combination? Thanks
don't cnoonect all your speakers in single channel it can ruin your amp if you want to connect only one speaker in a single channel just hook it up to any speaker terminal of your amplifier
Hi! Great video. It was really helpfull. Thanks!
Good joke.
Small question, is it possible to run the right speaker from the A terminals and the Left speaker from the B terminals and set the amplifier to A+B is there any benefit to this? Thanks I look forward to your response.
no point in that
damn..can we get to the nuts and bolts of this video?
On my Sony stereo receiver A speakers work fine... Don't know why my B speakers are not working 🤷🏻♂️
I did not get any information on how to connect speakers here.
Do you bi-wire?
Can sombody help me.
When i put my aux from my amplifier in my tv (headphone input) i have this sound when it's silent in a movie is there something to fix it??
Sounds like a ground loop problem. I would make sure your tv and amp are connected to the same power strip to avoid the feedback noise
The TV must be output and the aux amplifier input
My first experience of not having a dislike count to help me decide not to watch the video
How's the nephews sale record now
You spent over half of the video talking about your 22 year old IT man
Haha. The 'smart' nephew was listening to the right channel on both speakers?
If your nephew as such a good salesman, he should show you how to do a proper presentation.
Bro how do use amplifier to speak to connect to wre
How do I hook up two 4 ohms speakers to my stereo amplifier
Better don’t do it unless your amp can handle 2 ore 1 ohm
Hi i need a suggestion, how about an 5.1 amplifier which has 85 watt per channel with 5.1 set of 2 tower speaker with subwoofer capacity capacity is 180 watt per speaker& 1 center speaker 120 watt & 2 surround speakers 85 each. Is this a overload to the amplifier or will it be ok for a good clarity music & good life for the amplifier???
your amplifier will only clip if you will turn on the volume knob to far. 80W is very much. more as enough to drive these speakers
@@vintagestereo thank you 💐
Ik vind je video's echt leuk zou je het ook een keer in het Nederlands willen doen Ik ben benieuwd hoe is
ik heb maar 8% nederlandse subscribers
Ow je bent gewoon nederlands 😂😂😂
If both A and B are used, does that mean the impedance is changed ? like if an amp is using 8 ohm for 2 speakers, does that mean it will then changed to 4 ohm if using 4 speakers ??? How about the wattage ? if the amp is rated 65 watt 8 ohm per channel, if A and B is both used does that mean 65x4 or 65 is divided by two for A and B ?
8ohms will be per channel. It does not change if you use four or one. It is the resistance applied between + and - only.
So he opens the thing with a confusing story. Which leaves you more confused.
Pfft nice intro 👍
Where's the about speakers impedance compatibility to amplifier for running those four speakers?
All i wanted to know is how to connect an amp not ths whole amp
lmao i switched off after the first 30 seconds
didn't actually show the method of connecting the wires? just the completed job? not what I was looking for, never having seen the type of connectors before
Nice idol.. stay connected
yeah I have no idea. which wires go where so here I am
I wonder how i can connect my earphones to my amplifier? Is there a way to connect my 3.5mm jack to that red black knob? Im experimenting lol
To sum it up, I want to connect my earphones as if its a speakers. I wonder how is that possible
no you can't connect your earphone to your speaker out.
Hello, as I see you used cables that are not identical and it's not acceptable when you do bi-wire connection. They have to be exactly the same with identical lengths.
This is a 5 minute video and 3 minutes in I still have no idea how to connect this damn thing!!! Please don’t make any more videos!! This was a waist of my time! Thanks for nothing
Whew do I connect in?
Dutch?
Im still confused...maybe because I have some IT knowledge and am cursed
nice tips...
You sound like my pappous
this is supposed to be about audio not the boy lol.
When a person goes to you tube to find out how to do things we don't want wont to hear about your nephew job you give out too much information where a person lose interest. Just get to the Point!,
Good info
👌🌟🌟🌟🌟🌟👍
Zizek?
Is this is a storytime video about a smart nephew sales guy or how to connect wires to a speaker?
People should get to the point of the topic of the video because TIME IS EXPENSIVE!!!
lol, I came here to figure out how to connect speakers, and I'm stuck here listening to some story about your 22 year old nephew.
So you did not explain how to connect it to the speakers 😒
No story needed...just get straight to the tutorial
This whole could have been 1 min
🤣 Wtf .... JFC Slowpoke
so i says to the guy i says
Nonsense topic, Go directly to your topic, nobody knows your family.
Sweet
"an" amplifier
Do you have niece as well ? Tell about her as well please along with other family members as well. People want to listen. Hope everything good. Guy is smart very smart which tells you are not smart at all. Why should we listen to Harry Potter story. Are you ok?
Don't do drugs kids, mmmkaayy
Seriously?😵💫
what is this a plug for your nephew this is not suposed to be a blog i wana know how to connect my speakers not know your pride still lives in his momma house dude come on
I am even more confused after watching this.
???????????
Call b.s on your fairy tale story
What a waste of my time watching this doesn't even show the back of the speakers
say hallo to ur nephew and dont post anymore
As clear as mud.🙁