OSPF seven Stages - Video By Sikandar Shaik || Dual CCIE (RS/SP) # 35012

OSPF routers go through the seven states, called Down, Attempt/Init, Two ways, Exstart, Exchange, Loading and full while building adjacency with other OSPF speaking routers.

[@ravi12ver]

Dear Sir, you have a fantastic way of explaining, keep rocking.you made this very simple and easy, what we read in boring books!

[@Jamerican284]

This is so well explained. Of all the videos that I have watched, this has got to be the best explained one thus far. Thanks man ... Cheers!

[@iftikharahmad1426]

love the way you are describing it. Thames up and stay blessed always

[@hemantbhatt1486]

So simply easy to understand explained . Thank you !!!!

[@koustavsahu1552]

This is the best explanation so far.. Thanks sir

[@DileepKumarMB]

Nicely explained the stages of "ospf"
Good one.

[@saifu62]

hats of to u sir...great guidence

[@omkhard1833]

Thank You Sir very nicely Explained ....... Great Video

[@jagadish_007]

nice explanation sir...

[@MahendraPatil-rw3fe]

Hi sir, Thank you for your valuable time and efforts. Very nice explained. Request you to give proper sequence to videos. Thanks.

[@parshuramkattimani2934]

Hello sir, thnx very much for excellent vedio..... Sir 1 problem is that, videos are not sequentially due to the reason, I'm very confusing.... Sir I request to you, plz if you don't mind, do sequentially and upload again...
Tnx si👍👍👍💐

[@rasheedmalik6594]

Awesome...Thumbs Up!!!!

[@haribolanil]

thanks sikandar bhai

[@princechacko2050]

thank you so much.. Sir.. Best explained..

[@raghavendrabs8936]

Thanks so much as always.

[@prashantjadhav4342]

Thank you Sir.
It's really very nice explained.👏🏻👏🏻

[@parameshpenikelapati3217]

superb sir

[@lovwait220]

Great explaining

[@emdnaidu]

In Broadcast domain:- Always hello packets destination IP address is multicast only(224.0.0.5) whether it is init or two-way state.

[@prashantanand370]

Very well explained

[@raheempasha7423]

Outstanding

[@irfanshariff1665]

Thank you for taking time/efforts and sharing your knowledge with us in a most simplest way possible. But I have a doubt - If EIGRP topology table is filled with the best route possible, then what is the difference between the EIGRP topology table and the EIGRP routing table. Are they going to carry the same information?

[@joepoor5327]

thnk u ,,,

[@vijaykumar-dy4vb]

Thanks sir

[@gugugogo6314]

Thank u very much

[@Nk-cy1cu]

you have used 244.0.0.5 multicast address instead of 224.0.0.5 @ 4.27 in your video which is wrong. could be a typing mistake but just a correction. overall nice video...thanks

[@haribolanil]

dear pls upload videos of mp- bgp with different vrf' s concept not cleared properly

[@avinashsharma7434]

Hello Sir, very well explained, can you please upload full ospf videos sequentially. In this series, multiple topics are not covered like Ospf network type, ospf area type, ospf default route etc.

[@krishankant2152]

Contact krishan Kant 9818776614

[@chandrakarthik5044]

its 224.0.0.5 sir , not 244.0.0.5 my be printing mistake

[@nikunjkrishnarayal]

EIGRP is not fully functional multi vendor protocol. Only OSPF is. Great Video btw.

[@stevemartins8745]

Sir please check the multicast address you gave on this topology....Is it the correct multicast ospf address because mine say its 224.0.0.5 and not 244.0.0.5..I don't know if am correct or not...Thanks

[@pratimchatterjee2401]

please suggest routing and switching book for reference

[@safiullahansari371]

Sir what is the basic use of OSPF ..OSPF ka kaam kia he...kia karte he isse...plz answer...kb hum OSPF ka use krenge???

[@karunadhamapurkar4790]

Sir , ye Ospf konse companies me use kiya jata hai

[@sainathpatil5276]

Hello sir can u create a video on Auto summary and Redistribution and Routing Key chain Authentication

[@sowmyaug8627]

Hi sir thanks for the contribution sir is only by seeing and learning all your videos is enough to pass ccna r and s exam please reply it sir

[@lenovok0074]

sowmya ug

[@safiullahansari371]

Sir one more question...what is key parameter of OSPF to make neighbours???

[@pratimchatterjee2401]

please suggest ospf,bgp ,Eigrp books

[@AllenAndersonTaylor]

You forgot to mention "ip ospf priority". You skipped straight to the highest RID. If all routers have the default priority of 1 (or matching priorities), then it will choose the highest RID.

[@nycalien]

Sorry but I think you're thinking of the DR/BDR.

[@RahulSharma-vw8kg]

what about attempt state

[@funkyou_01]

used in nbma like frame relay atm point to multipoint

[@velmurugan383]

Could you share this manual ?

[@user-kz6qn2qv9i]

I like all of your tutorials, you are simply amazing, btw u were handsome when you were shaven your beard. What made you to grow the beard?

[@SIKANDARshaik]

Praise be to Allaah.
The Sunnah of the Messenger of Allaah (peace and blessings of Allaah be upon him) indicates that it is obligatory to let the beard grow and that it is haraam to shave it or cut it. It was narrated in al-Saheehayn that the Prophet (peace and blessings of Allaah be upon him) said: “Cut the moustache and let the beard grow; be different from the mushrikeen.” (al-Bukhaari, al-Libaas, 5442; Muslim, al-Tahaarah, 382)

[@SIKANDARshaik]

as a muslim I am trying to be strong follower of islamic teachings where it says to leave your beard to grow, and trim moustaches..

[@user-kz6qn2qv9i]

🤗 🙏

[@ncrayan101]

@@SIKANDARshaik I respect you sir

[@dattatrayapadwal1960]

Hello sir, amazing video , can i get same video of bgp protocol????

[@SIKANDARshaik]

th-cam.com/play/PLJqb_j53o7BiVPaFGQxEHhGx-ximMukwH.html

[@kidsmusiczone375]

Good understanding with ideas ,presumption is best thanks for your support & effort sir ...keep roking for next videos...🙏Jay Jagannath

[@droidcrasher]

Please consider what follows as "constructive criticism" of your video.
First, let's correct the OSPF multicast ip which is NOT 244.0.0.5...
But rather one of TWO ip addresses: 224.0.0.5 or 224.0.0.6
Secondly, if you're to make an informative video in English....
It would be nice for you to slow down and PRONUNCIATE!
For instance when you pronounce ROUTER ID....
It sounds like "ROT RIDEY".
I had to stop and back up 3 times...
And still I didn't get what you were saying...
Until I could read it on your slide.
It's ROU-TER- I-D
That said,
If not only I can't UNDERSTAND what you say when you say it...
But I can't READ what you write when you write it...
You make it incredibly difficult for me to get what you're trying to explain!
So please try to apply yourself when you write...
So your students can follow you.
Otherwise Great Effort and Thank You!

[@arunkolathur1787]

you get a life if you not understand basic english

[@anwarahmed5342]

droidcrasher
Yes the Multicast address of OSPF are two:-
224.0.0.6 is used by the DR and DBR, while 224.0.0.5 is used by DROther routers.

[@sahaba2380]

go to any English class and learn English if you do not understand

[@kuldeeptekale2437]

The first person I have seen in my life, who didn't understand English language properly. I have advise you to get English coaching classes first and then come to learn CCNA. disgusting:(

[@biggerfann9189]

Someone goes out of there way to put some free content on here and all you can do is critise his accent.. did he look White to you, daft plank go and learn some manners and respect for offered knowledge and change yourself not the world around you.

[@chandrakarthik5044]

its 224.0.0.5 sir , not 244.0.0.5 my be printing mistake

[@rasheedmalik6594]

yep its 224.0.0.5 nd from DR its 224.0.0.6