I doesn't look to precise. I think you could have to build your own mix depending on what your needs are. I'm guessing this would be suitable for rain water drainage or may need further processing.
Cement pipes are a big hassle to make and transport. Smaller clay pipes are sometimes extruded, instead of being poured into a mold. The problem with cement pipes is that they can’t be extruded, because they would collapse. There’s no internal support. So I was wondering: What if strong round internal-support frames were made out of a water-soluble material, like gelatin? So the trench would be dug, and then a cement truck with an extruder on the back-end would extrude the cement pipe directly into the trench, while workers insert the gelatin support frames? The frame would be layered with waterproof-tape all around the outside circumference, so that that it wouldn’t be affected by contact with the wet cement. After the cement cures for couple of days, water would be run through the new pipe, causing the internal gelatin support frame to dissolve. I suppose the cost of the support-frames would be one of the deciding factors. Gelatin isn’t cheap.
Very owesome and Advantage full video raelly
I'm glad you liked this video
But what tools were used to create the tools that were used to create the pipes?
What is th ratio of cement, gravel and water
I doesn't look to precise. I think you could have to build your own mix depending on what your needs are. I'm guessing this would be suitable for rain water drainage or may need further processing.
For every 100 kg, 30 kg of cement is used
Hola y cuanto bale cada tubo de cantarilla de cemento
Hola En Irán su precio ronda los 4 dólares.
Selamlar usdam bunların boyu 1 metre eni 30 veya 40 santim varmı
They are produced in different dimensions. It is usually produced at a height of 80 cm
Vcs vendem essas formas
yes
Where do I find this mould?
This work was produced in Iran, my friend
Location po? Bulacan kami
This workshop is located in Iran
Dropping 10% lol ….. get a large flat shovel and weld the end close and cut one side round as the opening .
Thank you very much for your advice
Location
iran
Give me the address
Dirección de la fábrica de pipas de cemento
Como se aclopa
Glad you watched our video
Magkano Po presyo Ng hulmaan Ng imbornal salamat sa sagot
Ang mga hulma na ito ay ginawa sa Iran. Ang kanilang presyo ay halos 3 dolyar
Cement pipes are a big hassle to make and transport. Smaller clay pipes are sometimes extruded, instead of being poured into a mold.
The problem with cement pipes is that they can’t be extruded, because they would collapse. There’s no internal support.
So I was wondering: What if strong round internal-support frames were made out of a water-soluble material, like gelatin?
So the trench would be dug, and then a cement truck with an extruder on the back-end would extrude the cement pipe directly into the trench, while workers insert the gelatin support frames?
The frame would be layered with waterproof-tape all around the outside circumference, so that that it wouldn’t be affected by contact with the wet cement.
After the cement cures for couple of days, water would be run through the new pipe, causing the internal gelatin support frame to dissolve.
I suppose the cost of the support-frames would be one of the deciding factors. Gelatin isn’t cheap.
Thank you very much for your excellent explanation. Good luck
Sand can make a pretty alright support structure. If you are so inclined.
@@scurvofpcp 👍👍👍👍
سلام هموطن خوبی.چنتا سوال ازت داشتم تو کامنتا مناسب که بپرسم اگه ایمیل آیدی تلگرام شماره تماسس چیزی بدی باهات ارتباط بگیرم ممنون میشم
درود بر شما. آیدی تلگرام خودتون رو اینجا بزارید، من به شما پیام میدم و آیدیتون رو از رو کامنتا حذف می کنم
আমা ফাইব লাগবে
আপনি কি বোঝাতে চেয়েছেন?
@@FromEveryWheree*#fiber*
Teleton at
👍👍👍
?
👍👍