Hi. I had the same problem on mine. I just took the servo apart, I took the rudder apart, I put the servo in neutral with the radio and I reassembled the rudder correctly. The problem has disappeared. It's just a problem with the command lag during assembly. Nothing serious. 🤘😎👌
I have the Same Problem - Center adjustment is useless in this case because the Servo is simply Not working correct. I will try a new servo - edit: a new servo didnt solve the problem.
Se o seu barco RC com turbina está virando mais para um lado do que para o outro, experimente ajustar a trimagem da turbina. Isso pode ser feito ajustando o ângulo da saída da turbina para equilibrar o controle de direção. Além disso, verifique se não há obstruções nas saídas de água da turbina que possam estar afetando o desempenho.
I managed to get mine to work with the trim. I trimmed far left, then far right, then center. Not nearly enough throw but enough to get some short videos of that I’ll post when I get a chance to edit. +1 to the power system. After half speed, steering doesn’t exist. Planning to try a 3s and then we’ll do a brushless swap
In my case it was a bad transmitter. For the brushless upgrade i had to change the radio controller anyway. With the new transmitter the original servo works fine.
I have the same problem
Man muss die EPA vom Servo einstellen
Recharge battery
Hi. I had the same problem on mine. I just took the servo apart, I took the rudder apart, I put the servo in neutral with the radio and I reassembled the rudder correctly. The problem has disappeared. It's just a problem with the command lag during assembly. Nothing serious. 🤘😎👌
Servo is bad, or the horn is bad. Cant really tell by the sound.
I have the Same Problem - Center adjustment is useless in this case because the Servo is simply Not working correct. I will try a new servo - edit: a new servo didnt solve the problem.
I believe it is transmitter issue
@@chenchen198 it was the esc. After i Put in a new esc and a new servo everything worked fine.
We have the same battery, but with a different plug
Se o seu barco RC com turbina está virando mais para um lado do que para o outro, experimente ajustar a trimagem da turbina. Isso pode ser feito ajustando o ângulo da saída da turbina para equilibrar o controle de direção. Além disso, verifique se não há obstruções nas saídas de água da turbina que possam estar afetando o desempenho.
I managed to get mine to work with the trim. I trimmed far left, then far right, then center. Not nearly enough throw but enough to get some short videos of that I’ll post when I get a chance to edit. +1 to the power system. After half speed, steering doesn’t exist. Planning to try a 3s and then we’ll do a brushless swap
Some of them got low battery protection and only ster without gas or otherwise but the secons s unusual
I had the same issue and sent it back to Amazon.
In my case it was a bad transmitter. For the brushless upgrade i had to change the radio controller anyway. With the new transmitter the original servo works fine.
Buy new servo
Set the trim right
Made mine brushless and bought a $5 scx24 servo off aliexpress steering so good steers so tight
Did the scx24 servo plug right in ?
Also, does the boat have self righting and reverse.
How did you fit the that big of a servo? I tried it on mine and it wouldnt fit in the mount
@@think2cre81 reverse but no self fighting and yes the scx24 Servo plugs in
@@coreymock1659 the scx24 servo is the same size
Trim
Trim does not work. I have to change the whole control system