Please, kindly help me. I have small induction cooker and is not working. It has a component that looked like zener diode in the place of the sensor (middle of the coil), I tested the igbt, the fuse and some common components, none are short and the induction refused to come on. It’s 800watts induction stove. Thanks for your assistance.
Gd pm sir, newbie lang Po, nagpalit Po ako Ng regulator sa low voltage, TAs Ng e on ko sya ung buzzer continues Po natunog ,ano Po kaya possible n sira non master.? Salamat.
Gud am boss Yong induction cooker walang power DIY lang ako na solve ko a sira ang ic Viper 12a kaso walang available Viper 22a ka it at sira den Yong katabing resistor 22.7 oms napagana ko umiinit na nag buzzer na lahat na tuoch gumagana kasi bawat touch ko tumotonog wala lang mga ilaw at Yong display wala ano Kaya Tama nito
Kung familiar ka sa bawat reading ng components, ok lang gumamit ng analog, kung familiar ka? E se sat x1 at may reading syang 0 ohms. Ibig sabihin may continuity ang coil, as good indication na may continuity xa. Pero kapag shorted coil (defective) , parehas din ang reading to 0hms, confusing diba? Better na, may iba ka pang test ng coil, like ring tester, milli ohmeter, o kahit esr.
Maraming salamat master sa iyong magandang tutorial. God bless!
Ayos kuya salamat sa info
Sir thank you for sharing. God bless
Watching po master ❤️
How to make the induction cooker to work normally without iron ?
Thesame resistance reading ba kung naka reverse or forward polarity ang tester ko sa pag test ng termal sensor?
Boss, meron po ba kayong branch dito sa bicol?
Please, kindly help me. I have small induction cooker and is not working. It has a component that looked like zener diode in the place of the sensor (middle of the coil), I tested the igbt, the fuse and some common components, none are short and the induction refused to come on.
It’s 800watts induction stove.
Thanks for your assistance.
Gd pm sir, newbie lang Po, nagpalit Po ako Ng regulator sa low voltage, TAs Ng e on ko sya ung buzzer continues Po natunog ,ano Po kaya possible n sira non master.? Salamat.
1st ata ako kuya
Salamat
watching sir 🙂
SIR paano Kaya MA solve ung e6 na error OK naman sensor @fan..sana masagot MO salamat new subscriber
Sir ano po yong kulay puti sa thermal sensor? Para saan po yun?
sir San Po nbibili sensor?
Gud am boss Yong induction cooker walang power DIY lang ako na solve ko a sira ang ic Viper 12a kaso walang available Viper 22a ka it at sira den Yong katabing resistor 22.7 oms napagana ko umiinit na nag buzzer na lahat na tuoch gumagana kasi bawat touch ko tumotonog wala lang mga ilaw at Yong display wala ano Kaya Tama nito
Pano po kaya Yung nag oon pero Hindi nag popower pag pinipindot Yung on switch
magandang araw bosing paano magtest yang induction coil gamit ang analog multitester salamat godbless
Kung familiar ka sa bawat reading ng components, ok lang gumamit ng analog, kung familiar ka? E se sat x1 at may reading syang 0 ohms. Ibig sabihin may continuity ang coil, as good indication na may continuity xa. Pero kapag shorted coil (defective) , parehas din ang reading to 0hms, confusing diba? Better na, may iba ka pang test ng coil, like ring tester, milli ohmeter, o kahit esr.
panood sir
Saan nakakabili ng EZR test meter? mga magkano yang ganyan, thanks
shopee.ph/product/240451904/17357031686?smtt=0.240457380-1672122328.9
Shopee sir
@@erctech5874 Thanks