Vedio was very helfull bro. Can u tell how to protect Mid from water vapours. Bcoz whenever i ride my Duke200 in rain vapours or bubbles appears on the Display Glass can u suggest how to protect it.
Hi... thanks for videos. Between please let me know what is max rpm and least rpm which can be set and what are it's effects. Lastly what top speed is achievable with max rpm.
+Ahmed Ali it does not depend on what rpm you set, bike will still reach its highest rpm, and top speed, rpm setting is just for indication purpose so you shift when you want to, and for min is like 500 rpm i think and max is 15000 but bikes engine only goes till 10500
Hello from Brazil, My friend! I see that after some time the km/L is reseted automatically... Is there any feature to configue to make it permanently??
Nice effort for the meter console how to adjust and it's very much helpful for all.. 1 thing how to reduce the engine heating for Duke 390?? If a warning flashes on the console?? Please help?
+Mehul Mistry shut off the engine when you stop at a signal or places same, and also get a better coolant, that will help a lot, and if warning flashes pull over on the side and let the bike rest for some time and kill the engine for that time,
I am planning to buy duke 200....is it good because i rev bike so much above 10k RPM....And max mileage kitna degi agar 70 pr chlaaye without revving much??
hii ...my name is mitesh ..could you advise if it's better to have a half clutch setting on Duke 390 or the normal setting is good enough? waiting for your reply
+mitesh bariya ill say go for normal settings because you can half clutch in that setting, and also if you get half clutch setting , it might burn the clutch in hard traffic and high revs .
Hi fuel injected.i like your videos as your videos are very informative can you please make a braking test video for the duke 200. It will really mean to me a lot as m planning to buy one.hope to see the video as soon as possible.
The Rohan Brother RPM1 is lower than RPM2. if you reach RPM1 you shift light will blink red and if you reach RPM2 shift light will stop blinking and will get light up red without blinking. Thanks
Mate what's the difference between trip one and two? One is the total number of kilometres the bike has travelled since I bought it and two is the number of KM's I covered since I last turned on the engine? Correct me if I'm wrong, really confused on this one
+Naman Rana Both can't be set at same RPM, both are indicators of a particular RPM, RPM 1 tells lower set rpm and blinks while RPM 2 tells higher set rpm and lights up without blinking
Fuel Injected I set rpm 2 at 12500 on trip 2 but can't find rpm 1? and when i set time i want..how can i make it permanent? Btw is thh helmet worth it? where did you got ktm keychain?
+Naman Rana For making the time permanent, after setting the time again press both button and keep it pressed.bike goes till 10500 rpm only so no need to keep the setting so high, and to set RPM 1 press mode button instead of set button in Trip2 and keep it pressed till RPM2 occurs.
Fuel Injected Thanks Mode button showed rpm 1 and i set it to 8500 i know that bajaj reduced it to just 10500 but still atleast i can set it to 12500 in show only😂 I will say that at times i feel the need for abs and i got mine in June 2016.
+PAVAN KALYAN shift rpm is just to indicate, it does not limit your RPM, and you can set it at 6000 so that you know bike has reached 6000 rpm and you should shift so you get good mileage
(1)wt is speedlimiter in ktm bikes? (2)how to remove it? (3)what will speed after remove it in rc200/duke200? tell me...bro...!! i saw many video of duke200 top speed without limiter is 155+km/hr is it possible???
+Yuvanesh Kumar Brother RPM is rounds per minute the engine is spinning at. If say its at 5000 then engine will be spinning at 5000 rounds every minute. Some bikes can go to high rpm like 15000 also like BMW S1000RR.
+abn mdr7 I cannot understand your problem, it will be better if you consult your KTM mechanic and tell him the problem that you are facing, because my duke goes around 40 in 1st gear.
Fuel Injected in my bike first I was putting 6th gear at 112 kmpg as per rpm light but yesterday I changed the rpm and now the rpm signal z getting at 105kmph. Now wt should I do to make it normal as it was earlier
+Jr. PEWDIEPIE You can do full tank, then ride Your bike and again do full tank, see how much fuel you filled and see how many KM you did in that period, after that divide the KM by litres. ( KM Driven / Litres of fuel used) .
Bro my set button feautres are not working i can reset trip using set button but mileage, average speed, service etc not showing middle area is looking empty and also starting it is also not showing ready to race logo and side stand down what should i do ktm service centre is 150km away from my house and 300 km total it is impossible for me to go to service centre pls tell me solution i will fix it with my local mechanic..... Btw my bike is 2 years old now
+shubhamdeep sharma Bro its just an indicator for you to shift up, you can keep rpm 1 for city and rpm 2 for fast riding, thr difference you'll see is that at rpm1 it blinks and in rpm2 it becomes constant red.
![ILLSLICK - THE KING'S LANDING [Freestyle]](http://i.ytimg.com/vi/feIJJnNkTfk/mqdefault.jpg)
Thanks bro I didn't know how it works, but you have explained very well 👍. Keep going like this
i picked up rc 390 day before yesterday
got confuse about the console
now i know
thanks bro
+hari Prashanth welcome
42 subscribers? you have now 8.1k .... good job.
Now 35k 😍😘
Now 100k+
"Press" and "hold" are two different things,
Keep it up
thank you brother. I always struggled setting up the time on my KTM 200
Rpm ko unlock kese kare???? or for a better millage in duke 200 rpm ko kitna numbr set karu?? issh topic me ak video banao yr☺️
Vedio was very helfull bro. Can u tell how to protect Mid from water vapours. Bcoz whenever i ride my Duke200 in rain vapours or bubbles appears on the Display Glass can u suggest how to protect it.
Happens with me too, after few days it gets normal
Finally bhought this beast... A great machine
+Abhinav Rathor congrats
Hi... thanks for videos. Between please let me know what is max rpm and least rpm which can be set and what are it's effects. Lastly what top speed is achievable with max rpm.
+Ahmed Ali it does not depend on what rpm you set, bike will still reach its highest rpm, and top speed, rpm setting is just for indication purpose so you shift when you want to, and for min is like 500 rpm i think and max is 15000 but bikes engine only goes till 10500
rlly helped me out. thank you.
brother thank you so much for the help, this video is very helpful. you did tremendous job brother..keep it up ride safe
+Dhruv Bhattacharya Thanks
Hello from Brazil, My friend! I see that after some time the km/L is reseted automatically... Is there any feature to configue to make it permanently??
Nice effort for the meter console how to adjust and it's very much helpful for all.. 1 thing how to reduce the engine heating for Duke 390?? If a warning flashes on the console?? Please help?
+Mehul Mistry shut off the engine when you stop at a signal or places same, and also get a better coolant, that will help a lot, and if warning flashes pull over on the side and let the bike rest for some time and kill the engine for that time,
I am planning to buy duke 200....is it good because i rev bike so much above 10k RPM....And max mileage kitna degi agar 70 pr chlaaye without revving much??
Yes, it has a rev limiter so no problem and mileage will be around 32 kmpl
@@FuelInjected I'm a noob Duke rider and ride between 40-50 KMPH. What rpm should I set on my bike
U r nice , humble guy, all the best bro
Bro your rpm 1 and rpm are as per company recommended 7000,7500 ???
I have a new duke but confused in speedometer thank you for reviewing 🤠
hii ...my name is mitesh ..could you advise if it's better to have a half clutch setting on Duke 390 or the normal setting is good enough? waiting for your reply
+mitesh bariya ill say go for normal settings because you can half clutch in that setting, and also if you get half clutch setting , it might burn the clutch in hard traffic and high revs .
Hi fuel injected.i like your videos as your videos are very informative can you please make a braking test video for the duke 200. It will really mean to me a lot as m planning to buy one.hope to see the video as soon as possible.
Yaa sure Brother
Helped me a lot man ty
Bhai,does the instrument cluster of the bike shows the accurate average mileage of the bike?
can u plz make a video on how to set the gear shift indicator......
+SHUBHAM JAGLAN yaa sure
tq myan so informative!!
hey bro...what is the difference in RPM1 nd RPM2 limiter that u have shown in this video??
The Rohan Brother RPM1 is lower than RPM2. if you reach RPM1 you shift light will blink red and if you reach RPM2 shift light will stop blinking and will get light up red without blinking. Thanks
where you service your bike Bhopal or indoor ?
+ABHIJEET DHALI In Jabalpur
hii... thanks for the video but I want to know what is RPM how it will use bike
Hello friend.. I want to buy speedometer of ktm390 2016. But I can't find it anywhere.. can u please tell me how can I buy this..
Bhai ek doubt hai. Console me mileage information hamesha dikhe by default. Iske liye kya karna padega
Sir, is it natural of the time stopped when the bike turned off or not used?
+Jonathan Gotgot Dont know, but every time my bike shows correct time when i start it
Fuel Injected I see, I think I got a problem with this. I think this won't be replaced , I just got my duke 200 last 2weeks ago
Helpfull bro...tq
NYC video...A much needed one..👍
Watching after 4 years 😂
Mate what's the difference between trip one and two? One is the total number of kilometres the bike has travelled since I bought it and two is the number of KM's I covered since I last turned on the engine? Correct me if I'm wrong, really confused on this one
No its not like that, both are same, its just for your convenience, so that you can have two different measures
@@FuelInjected alright buddy, thanks for the info. Really appreciate it. What do you ride? Duke 200?
Bro worthy to buy DUKE 200 OR NS2OO
Both are worthy
Helpfull i subscribe today
Nicely done..
Hi. I pressed n hold more than 15 secs for the rpm settings. No options wer visible. Please help me go through it.
Can we check what's our high speed we have ride .?
can u pls explain detail about the mode option
+Naveen Kumar i told it in the video, if you still have a problem, you can ask
42 lol!! you have a 24k subscribers now!!!!! good job by the way.
Thanks
thnx Mate👍
It's increase speed??
Thanks brother
What does rpm 1 and 2 mean and should i set them both to 10500?
btw..also a duke owner :)
+Naman Rana Both can't be set at same RPM, both are indicators of a particular RPM, RPM 1 tells lower set rpm and blinks while RPM 2 tells higher set rpm and lights up without blinking
Fuel Injected I set rpm 2 at 12500 on trip 2 but can't find rpm 1?
and when i set time i want..how can i make it permanent?
Btw is thh helmet worth it?
where did you got ktm keychain?
+Naman Rana For making the time permanent, after setting the time again press both button and keep it pressed.bike goes till 10500 rpm only so no need to keep the setting so high, and to set RPM 1 press mode button instead of set button in Trip2 and keep it pressed till RPM2 occurs.
+Naman Rana Helmet is great and an awesome product, and I got the keychain from local shop.
Fuel Injected Thanks Mode button showed rpm 1 and i set it to 8500
i know that bajaj reduced it to just 10500 but still atleast i can set it to 12500 in show only😂
I will say that at times i feel the need for abs and i got mine in June 2016.
Dude is there any way by which we can see what was the top speed I reached in my last ride? Or the top speed i have reached till date
No
my display only showing a lock key ab indicator nd noting seen all black plzz can yu explain
wen is the new duke 200 releasing bro??
+MkRajath.4494 cant tell, because KTM is not saying anything, but i think it will be launched in March, April
wat about 390 duke
+MkRajath.4494 till March last
MkRajath.4494 it'll be launch on 23rd February. The wait is over
how to reset trip on a pulsar 150
hey bro..
is it possible to get Duke 200 in ABS version??
+The Rohan Not possible in the current model, you might get it on the 2017 model. Thanks
thnx 4 the info
Thank you...
Nice video
how to reset trip... and can i customise the combination like average mileage and range together
+Ananthakrishnan M No you cant customise that, and to reset keep pressed the set button
thank you for ur reply
How to see the mileage given by my bike? Duke 200
There are three holes on right side !
What’s with middle one ?
Hey bro
Y we need to set rpm n y their r two rpm
How much should be the rpm for better mileage and performance
Plz reply me or if possible do a vedio on that
+PAVAN KALYAN shift rpm is just to indicate, it does not limit your RPM, and you can set it at 6000 so that you know bike has reached 6000 rpm and you should shift so you get good mileage
Duke 200 bs4 mileage test video
Thanks
+salman mahetar welcome brother
Thank you boy
nice video
thiagu arul Thanks brother
Tq bro it helped me lot 😍
(1)wt is speedlimiter in ktm bikes?
(2)how to remove it?
(3)what will speed after remove it in rc200/duke200?
tell me...bro...!!
i saw many video of duke200 top speed without limiter is 155+km/hr is it possible???
Whats the use of engine warning..that yellow light
If you have any issue in your engine, it will come up
Key simple indicator for?.
That helped me
Bro what is the mileage of this duke 200
What is the problem in your engine bro
What's mean of rpm??
Price of ktm rc 200 meter box???
Bro my display is filled with water what to do.. It already a week past.... Still not get fixed
+santhosh santz let me ask my mechanic
what is meant by rpm do the next Vedio about rpm...
+Yuvanesh Kumar Brother RPM is rounds per minute the engine is spinning at. If say its at 5000 then engine will be spinning at 5000 rounds every minute. Some bikes can go to high rpm like 15000 also like BMW S1000RR.
Bro my bike not catching speed y plz solve
Get your clutch checked
200 has a option for abs???
+Mac Dutta RS has but not on NS
Bhai meri duke ka meter. Km ki jagah miles dikha rha h usko kese fix kru
my ktm duke can run only up to 19km/h on 1st gear does any know how to increase it??
+abn mdr7 That might be because of clutch problem, get it checked at the service center
i went to the service center and they said it is fine my rpm is set to 10000 but after reaching 5000 it make the noise to shift the gear
+abn mdr7 I cannot understand your problem, it will be better if you consult your KTM mechanic and tell him the problem that you are facing, because my duke goes around 40 in 1st gear.
is it because i just had my 1st servicing.
any idea about rc 200?
+Shubham Rathore its same, because engine is same, and it between this only because my friend has a rc200.
Bro what is the stock Rpm of ktm rc 200
10500
Fuel Injected its after third service?
What
Fuel Injected in my bike first I was putting 6th gear at 112 kmpg as per rpm light but yesterday I changed the rpm and now the rpm signal z getting at 105kmph. Now wt should I do to make it normal as it was earlier
Change it using the process i told
What about the middle one
Why shift engine light is still on if there is nothing wrong with bike
+Rstar Sunny you might have set it very low
Isn't the 'Average 37km' shown at 0.23 the mileage of the bike??
+Nishan Shetty no that is average speed
Fuel Injected It comes max to 42km..Around city limits
+Nishan Shetty Yaa because sometimes you ride fast, but in city you cannot maintain that high speed
Duke with ns200 handle bars
what happens when the RPM is low or RPM is high..???
it is just and indicator for you to shift up, if you want to shift early keep the rpm low and vice versa. Thanks
Agar evening beautiful h to hum kya kare?
Rohit Thakur toh nacho
bro you've forgot to mention the hidden abs button
+Gareja Nil yaa, i did shoot once because i forgot something and second time i forgot this, and now im getting to know this, sorry
How to check mileage
+Jr. PEWDIEPIE You can do full tank, then ride Your bike and again do full tank, see how much fuel you filled and see how many KM you did in that period, after that divide the KM by litres. ( KM Driven / Litres of fuel used) .
bro what is that RPM?
is it RPM limiter..?
+Harsha Gowda No its An indicator, it tell when to shift up, you can set it as to when you want to shift up.
Bro I'm not talking about the shift light
I'm talking about the RPM setter that u showed in menu
What is it for..?
have u got the answers ?? i am too dnt know what it does
+Nayeer Samsi just observation
Harsha Gowda its just for rpm indicator, when u exceedes the limit u set, the indicator blinks. It's useless
Does Duke 200 have abs??
+Bhuwan Bashyal no
And what about Duke 250
+Bhuwan Bashyal no abs
Halow sir aap hindi me video banaiye pls pls
Buddy what is the need to set rpm
I m nt getting it🤔
+Karan Singh for indicating when to shift up, you can set it according to your preference, like for getting mileage set it low
You forgot to mention to switch between kmph and MPH settings.
+MyAaronstone Ok, ill tell it
Service reset👈 showing in my bike how to remove that
Duke 200
Told it in the video
mileage of ktm duke 200
How to see high speed
It does not have that feature
Bich wala light kya show krta h?
Shift light
Fuel Injected wo bhi bro jo line se 3 light h na un k bare me puch rha hu
1 st is for warning, like stand
3 rd is for abs, 2 is not there only they gave a hole there
Fuel Injected thnx bro
i dont get it why is it useful to show the average speed
जबलपुर के आओ भैया तो हिंदी। में वीडियो बनाओ जबलपुरिया भासा में।
bro mileage ??
+Shubham Rathore Brother im getting between 32-35
Bhai meri low fuel ki light on hi rehti h hmesha petrol bhi dalwata hu phir bhi
Get it checked at service center, might be sensor fault
duke mileage in City
+sushant Momin 35
+Mohtashim Ansari yes im from Jabalpur
Bro my set button feautres are not working i can reset trip using set button but mileage, average speed, service etc not showing middle area is looking empty and also starting it is also not showing ready to race logo and side stand down what should i do ktm service centre is 150km away from my house and 300 km total it is impossible for me to go to service centre pls tell me solution i will fix it with my local mechanic..... Btw my bike is 2 years old now
+Abhinav Rathor i think check your fuse, and if not that i think speedometer is gone
what is the purpose of rpm 1 and rpm2
+shubhamdeep sharma Bro its just an indicator for you to shift up, you can keep rpm 1 for city and rpm 2 for fast riding, thr difference you'll see is that at rpm1 it blinks and in rpm2 it becomes constant red.
Fuel Injected thanks
my bike engine light not working
Check fuse