merci curtis désolé je ne parle pas l'anglais , je voulais juste vous dire que vous êtes le meilleur , grace à vous j'ai les idés plus claire pour faire cette procedure merci à vous que la santé sois avec vous merci
The photos of the FEM and BDC look similar at first glance but the EEPROM chip is just one of many differences. Thank you for your videos, they are much appreciated!
Thank you so much for the video. I am a beginner with locksmith this video is pure gold. you say check if keys it been add to the car before. we can check by obd? or bench.
Hi Curtis , keep up the good work. Your positive can do attitude is infectious. I am a small repairer from the UK and watch alot of your post's. Keep them coming. All the best , Lee
Hello. Just have 1 question. At the end say to put key for 10 seconds on the sart coil and press for 10 seconds. Do we do this part on the FEM Simulator or after all is put back and install on the car? Thanks for all you put up. Is a big help.
hello greetings from Mexico very good videos congratulations. why in your i'm 608 all the time you have only 12 volts and 11.90 in bench there is no problem that we don't have 13 volts?
Thank you so much for your videos , questions why do you disconnect the negative ⚫️ battery terminal and not the positive 🔴? What difference does it make? Thanks so much. You are the best ,,, thank you for time
u disconnect the negative battery cable first because working on the negativce side first is no danger when touching other things, if u disconnect + first u can touch something with your tool and sparks will fly, so u teach to disconnect negative first so those accidents dont happen in the first place
I'm guessing the process of removing the FEM/BDC and attaching clamps is ONLY required if a key has not already been added? I.e if a car has several keys and one has been added since it was produced, you can in theory just program the key using the XP400 and the IM508/608 connected via OBD?
Dear Curtis, 🔴 In the diagram shown at 8:22, the connection of the APA 103 cable to the xp400 is shown incorrectly. The red wire should be connected to the programmer on the reverse side, not the IR reader side. Like at 10:07 seconds. Also, this diagram does not show how to connect APA 103 cable to the fem module eprom. This can mislead people. 🔴 First explains how to make a connection with the connection diagram. After explaining the key programming process is started. But; 1- When starting the process, there is no information about whether the power is on or off. 2- In the diagram described, fuses are not installed on the Fem module, so key programming cannot be started like that. 3- In the diagram described, it is shown that the xp400 is connected to the eprom and the programming process is started in this way. When starting the programming, no eprom connection is made at this stage. Moreover, in the video described, it is seen that the voltage is on while xp400 connected to the eprom and started process like this, 10:27. Starting this process with the power on depending on the eprom will damage the eprom. I think correcting these details will eliminates the possibility of making mistakes. Thanks.
Thank you for wonderful video, quick question how do you know what smart key to use in case of all keys lost , there are 2 different types PCF7953p PCF7945p Both are smart keys for FEM system How do you know what is the right key ? I know the Autel will tell us the frequency but not other info. Thank you so much.
Hi i saw a lot of videos adding a key by obd for cas4 cas4 plus ..ur video dating since sept 2020 ..aute lmade a update now ?...mine is a bmw x5 2014 thanks
👍 Thanks for that! I just checked my keys status and i discovered that there's 3 keys programmed in FEM but the bad news that 3rd slot is taken I've heard that at list should slot 7 6 or 5 but if slot 3 is taken then i can't add another key. Is there solution for that 🤔
Generally speaking, can the Autel Im608 program any Audi's, BMWs, Volkswagen without going into an advanced technique? (Basically just through the OBD)
Hi cutis Please can you give a detail on how to add blade key on Toyota corolla 2020. I tried to do it myself with my autel maxilm im608 but couldn't do it.
I’ve Purchased an im608 pro and I’m impressed with what I’ve done so far with it. But I need to programme a new key for a g series bmw m340d could you give me some assistance places
Hello, I dont know any places that offers training on this specific procedure. Have you tried calling Autel to assist you or your supplier who you purchased from?
@@Canbus_AT I blocked this key with the autel im608 pro because it was an original spare key for the car that went missing suspected theft out the house by some unsavoury character. Then it miraculously turned up! So I just need to remove the block I done on the same unit
hello good video i have a cuestion on 2017 bmw x5 bdc when i go smart selection a got failed to read vcm information is vin # but no miles did you know how to fix that please
@@AutelConsultancy hey Curtis I had a question, since I’m doing it without a FEM/BDC bench platform; do I have to reassemble the entire FEM module with all plugs & fuses? Or just connections 7&8? Thank you!
@@mitochondriaisthepowerhous8936 Yes. Other wise the autel wont communicate . I just helped a gentlemen who put the fem module back on the vehicle but the autel wouldnt comunicate. I asked him if he put the fuses back on and he said no. So after he put the fuses on then the autel would communicate
How do you do this with the im508 since it doesn't have the j2534?Are you using the j2534 just to provide 12v power here??So when I use the im508 and my Godiag test platform I just use a 12v power supply to the Godiag from somewhere?
Hello Curtis, my IM608 can't connect with the EEPROM. Probably because there is a layer of coating on it. What solvents should I use to clean the EEPROM to get rid of the coating?! Please advise, many thanks.
Nice video sir I appreciate it But have question...what is the safe voltage for simulator...12V or 13V...can we connect 13V dc on this simulator? I have exactly this type
Hola mi estimado curtis donde compro esa herramienta para el fem y otra consulta tengo en mi taller bmw 118i 2013 n13 f20 sin fem, llave y dme como puedo hacer la programacion?
Its difficult to pin point our issue with a proper diagnoses. Maybe there is an underlining problem with the key or component in the immo system. You can try see what faults are stored in the immo system then try relearning the remotes separately if that function is there.
Nice video Curtis, but I got a question.. Can you also do ecu programming/encoding with the im608 pro? Or do you need the mk908p? Because I want to do ecu programming and keys.
Hey Tiger, You would need to use the j2534 with a windows laptop if you want to do programming with the IM608. The MK908P has the ability to program for bmw and benz only from the tablet. The rest of the manufactures you need to use a j2534 and laptop
@@AutelConsultancy Thank you for the fast response Curtis. So I can do bmw and Mercedes with the im608 tablet? And what about the other brands. Do you also get the software to use j2534 for Windows?
Hi, how can i do all keys lost to a x3 2016? The option is stated as only part supported... I have im608 with g box etc... can this be done on bench using fem module only?
I have an issue with fem not communicating with the dme car was running fine 2 weeks later a bunuch of codes.and the fuel pump keeps running on check position no crank nothing
Hello Curtis, I added a key to a 4 series 2016 FEM. All steps were successful but once I put everything back to the car the second key is not working. In the dashboard it says key not detected and it was programmed successfully. Do you think it might be the key battery? Any tips or help? Thanks
Hey my friend. Long time ! That tool has limitations that im not sure your aware of. What I would suggest you do is go to www.auteltech.co.za and click the existing clients service since we spoke before. Then will share with you which tool that will be good for your requirments and also share with you my services . ( There are perks that my clients recieve regarding updates and warranties)
Hello, I need advice from you! I recorded keys with 315Mhz. many times on FEM, not when there were no problems, everything worked fine. A couple of times I wrote down the keys from 434Mhz to F32. and after that the car starts up, but the radio channel does not work! What could be the problem ? When Fem read, it showed 433Mhz. and I recorded the key with 434Mhz! Do they have a difference? Thank you.
Hi Manny. From my knowledge once you jailbreak the FEM once , you don't need to do it again afterward. I think if you try doing the procedure via obd and it works , it means its jail broken. If you try via obd and it fails then you need to do it again.
Hi, I've already successfully managed to do this by following the video. HOWEVER we've not lost the new key and the original! How do we go about making a new key now the FEM is unlocked and I guess we must have a backup? Car is open thankfully 😁
HI Daniel. Great question. The way I am able to help my client achieve results is via an appointment system. This way I can dedicate that hour to assist the client with no interruptions. If its an emergency you can call me as well but If I am on a booking with another client you can email me . I work normal business hours .
HI Kennedy. If you want results I can sell you the tool directy. I have many clients in Kenya . If your seirous you can book a diagnostic tool consultaiton so I can assess your requirments throroghly and design a package that will help you get the best value. Go to www.auteltech.co.za and book the diagnost tool consultation. Thanks
Hey, off the subject but...Do you happen to know if there is an adapter that will allow the little autel ap200 bluetooth readers to connect to the round 38pin connector located under the hood of mercedes cars?
Hi Curtis You can explain how to find(read) the pin to the mechanical key of the car (all keys lost)with AUTEL MAXIIM IM608 or there is a separate software that can be purchased on a decoder from AUTEL which it does this by VIN NUMBER. Kind regards
Hi Jin, Unfotuntly not. The j2534 is only used with the laptop to do ecu programming. There are other modules the jbox can be linked with but the im508 and 608 are not one of them.
I am new in the business and I am lost and I am trying to look for an school or a really good clases so I can move forward. I am working on a BMW 335I all keys lost and I am wondering if I can do this on it.
Hello, If you want me to investigate the problem and get my engineers response you can book a diagnostic consultation at my website. Or you can contact your supplier to see if they can assist you .
@@AutelConsultancy thanks but I realised the problem. The clamp supplied is faulty, it just can't get a consistent read so I've ordered an aftermarket one.
I would really love to get in to autel like everything about it I work on many old cars what we do we modernized them meaning we update engine to present ones And what I used is hp tuners But lately we been getting new cars that need diagnostic and we have to turn them down because we don’t have experience and equipment to help them out.
@@pacotrujillp5576 I see . There has been alot of people who recently been experienceing this same issue. If your series want me to set you up with the right tool and training for the future, go to www.auteltech.co.za and click the diagnostic tool consultation. Book a time slot and then ill call you up on that date and time.
Hi! I have a 608 and I just purchased it. I want to program a ‘13 Honda Accord. The vehicle has one original key fob. How can I program/add the new key to the car? Thank you
HI Moshin, I hope your doing well. If you would like training on your vehicle , you can go to www.auteltech.co.za and click the diagnostic tool consultation. Ill log in and show you how its done and provide additonal information regarding hondas. Or you should contact your local supplier or autel new york. Thanks!
merci curtis désolé je ne parle pas l'anglais , je voulais juste vous dire que vous êtes le meilleur , grace à vous j'ai les idés plus claire pour faire cette procedure merci à vous que la santé sois avec vous merci
No problem my friend. Thanks for the kind words
Huge respect for my brother.❤
Very well explained Straight forward and to the point.
I learn a lot from you brother plz keep it up.😊
The photos of the FEM and BDC look similar at first glance but the EEPROM chip is just one of many differences. Thank you for your videos, they are much appreciated!
Thank you very much. I have done F30 and F20. 100 % . If you have the right key and constant voltage, reading is all you need !!!
No need to read ISN from DME?
@@DFWAuto_Hackhe added a key with adding you can get the isn from the working key.
Thank you so much for the video. I am a beginner with locksmith this video is pure gold. you say check if keys it been add to the car before. we can check by obd? or bench.
Hi Curtis , keep up the good work. Your positive can do attitude is infectious. I am a small repairer from the UK and watch alot of your post's. Keep them coming. All the best , Lee
Thanks Lee. I appreciate your kind words. Thanks and take care!
Thank you Curtis. It was very explicit and clear.
HI Abeeb. Thanks so much Im glad you enjoyed. Take Care
Hello Curtis, your vidoes are indeed well done. Its easy to follow and learn from it. Its always great to watching one of your videos.
Hello. Just have 1 question. At the end say to put key for 10 seconds on the sart coil and press for 10 seconds. Do we do this part on the FEM Simulator or after all is put back and install on the car?
Thanks for all you put up. Is a big help.
hello greetings from Mexico very good videos congratulations. why in your i'm 608 all the time you have only 12 volts and 11.90 in bench there is no problem that we don't have 13 volts?
Thank you for taking your time to make this, it is appreciated by many.
Top presentation. I just have one question. How do I check via OBD to see if key was previously "Jailbroken"? Thank you Curtis.
would be amazing if someone from Autel actually responded
Thank you so much for your videos , questions why do you disconnect the negative ⚫️ battery terminal and not the positive 🔴? What difference does it make? Thanks so much.
You are the best ,,, thank you for time
u disconnect the negative battery cable first because working on the negativce side first is no danger when touching other things, if u disconnect + first u can touch something with your tool and sparks will fly, so u teach to disconnect negative first so those accidents dont happen in the first place
I'm guessing the process of removing the FEM/BDC and attaching clamps is ONLY required if a key has not already been added?
I.e if a car has several keys and one has been added since it was produced, you can in theory just program the key using the XP400 and the IM508/608 connected via OBD?
Great video. Any idea where I can buy this accessory for BMW. I’m in Ireland
Dear Curtis,
🔴 In the diagram shown at 8:22, the connection of the APA 103 cable to the xp400 is shown incorrectly. The red wire should be connected to the programmer on the reverse side, not the IR reader side. Like at 10:07 seconds. Also, this diagram does not show how to connect APA 103 cable to the fem module eprom. This can mislead people.
🔴 First explains how to make a connection with the connection diagram. After explaining the key programming process is started. But;
1- When starting the process, there is no information about whether the power is on or off.
2- In the diagram described, fuses are not installed on the Fem module, so key programming cannot be started like that.
3- In the diagram described, it is shown that the xp400 is connected to the eprom and the programming process is started in this way. When starting the programming, no eprom connection is made at this stage. Moreover, in the video described, it is seen that the voltage is on while xp400 connected to the eprom and started process like this, 10:27. Starting this process with the power on depending on the eprom will damage the eprom.
I think correcting these details will eliminates the possibility of making mistakes.
Thanks.
Thank you for wonderful video, quick question how do you know what smart key to use in case of all keys lost , there are 2 different types
PCF7953p
PCF7945p
Both are smart keys for FEM system
How do you know what is the right key ?
I know the Autel will tell us the frequency but not other info.
Thank you so much.
bro what are you talking about, cas 4 and fem/bdc are both ID47 HTPRO transponder
Does the test platform needs a separate power supply using 508?
Thank you for your video.
It is the same procedure for all BMW i series?
For example:
19 BMW 118i
15 BMW 116i
THANK YOU
Hi i saw a lot of videos adding a key by obd for cas4 cas4 plus ..ur video dating since sept 2020 ..aute lmade a update now ?...mine is a bmw x5 2014 thanks
👍 Thanks for that! I just checked my keys status and i discovered that there's 3 keys programmed in FEM but the bad news that 3rd slot is taken I've heard that at list should slot 7 6 or 5 but if slot 3 is taken then i can't add another key. Is there solution for that 🤔
Hi Curtis, I have a autel 608. how do I check if there has had keys added before via obd? Thanks
it's not a hard question, Autel. Just reply
Generally speaking, can the Autel Im608 program any Audi's, BMWs, Volkswagen without going into an advanced technique? (Basically just through the OBD)
Hi. Can you please provide information how to get ISN in all keys list case.
Thanks
Hi cutis
Please can you give a detail on how to add blade key on Toyota corolla 2020. I tried to do it myself with my autel maxilm im608 but couldn't do it.
I’ve
Purchased an im608 pro and I’m impressed with what I’ve done so far with it. But I need to programme a new key for a g series bmw m340d could you give me some assistance places
Hello, I dont know any places that offers training on this specific procedure. Have you tried calling Autel to assist you or your supplier who you purchased from?
G series dealer only bro
@@Canbus_AT I blocked this key with the autel im608 pro because it was an original spare key for the car that went missing suspected theft out the house by some unsavoury character. Then it miraculously turned up! So I just need to remove the block I done on the same unit
hello good video i have a cuestion on 2017 bmw x5 bdc when i go smart selection a got failed to read vcm information is vin # but no miles did you know how to fix that please
hi friend the videos are perfect thanks
Does it support im508 ?
Yes but you need the xp400 Pro to have the same level of bench programing as the IM608
Good Job Curtis ,question : i have IM508 with XP200 programmer can i run the procedure with that ?
The car is MINI country 2017 F60
If u had xp400 pro I would say yes.
great video! can you do this while inside the car without a bmw bench simulator ? thank!
Hi my friend. Yes you can its just more time consuming but its possible
@@AutelConsultancy hey Curtis I had a question, since I’m doing it without a FEM/BDC bench platform; do I have to reassemble the entire FEM module with all plugs & fuses? Or just connections 7&8? Thank you!
@@mitochondriaisthepowerhous8936 Yes. Other wise the autel wont communicate . I just helped a gentlemen who put the fem module back on the vehicle but the autel wouldnt comunicate. I asked him if he put the fuses back on and he said no. So after he put the fuses on then the autel would communicate
@@AutelConsultancy I see, thanks for the response. In that case I find it much easier to purchase the bench tool.
How do you do this with the im508 since it doesn't have the j2534?Are you using the j2534 just to provide 12v power here??So when I use the im508 and my
Godiag test platform I just use a 12v power supply to the Godiag from somewhere?
Hello Curtis, my IM608 can't connect with the EEPROM. Probably because there is a layer of coating on it. What solvents should I use to clean the EEPROM to get rid of the coating?! Please advise, many thanks.
What kind of question is that ?
Use speacil taner or acid.
Nice video sir
I appreciate it
But have question...what is the safe voltage for simulator...12V or 13V...can we connect 13V dc on this simulator?
I have exactly this type
have the Autel MS908SPRO and I was wondering if it does key programming for an 05 BMW 530I if the original key has lost programming?
Why does Autel keep messing up FEM coding? Everytime I do a bmw it erases the coding or messes it up.
Yes same situation what did you do bro share your experience
Hola mi estimado curtis donde compro esa herramienta para el fem y otra consulta tengo en mi taller bmw 118i 2013 n13 f20 sin fem, llave y dme como puedo hacer la programacion?
Hi the key was programmed, but the bottoms don’t work. And also I have to have to have key next to the arrows. In order to start the engine
Its difficult to pin point our issue with a proper diagnoses. Maybe there is an underlining problem with the key or component in the immo system. You can try see what faults are stored in the immo system then try relearning the remotes separately if that function is there.
Nice video Curtis, but I got a question.. Can you also do ecu programming/encoding with the im608 pro? Or do you need the mk908p? Because I want to do ecu programming and keys.
Hey Tiger, You would need to use the j2534 with a windows laptop if you want to do programming with the IM608. The MK908P has the ability to program for bmw and benz only from the tablet. The rest of the manufactures you need to use a j2534 and laptop
@@AutelConsultancy Thank you for the fast response Curtis. So I can do bmw and Mercedes with the im608 tablet? And what about the other brands. Do you also get the software to use j2534 for Windows?
@@ChangoeMotorsport HI Tiger. the im608 cant do bmw and benz programming from the tablet. You need to use the laptop for these and all manufactures
@@AutelConsultancy hi what laptop software you need to program bmw and benz with j2534?
How do you Bluetooth the jbox with im508
What are you trying to do exactly?
Hi, how can i do all keys lost to a x3 2016? The option is stated as only part supported...
I have im608 with g box etc... can this be done on bench using fem module only?
Thanks to you Chris but tried this with 508 BMW 2016 f 36 didn't work.
I have an issue with fem not communicating with the dme car was running fine 2 weeks later a bunuch of codes.and the fuel pump keeps running on check position no crank nothing
Hello Curtis can this tool do say the late bmw models say F20 2018 bdc module add a key thanks
Hello Curtis,
I added a key to a 4 series 2016 FEM. All steps were successful but once I put everything back to the car the second key is not working. In the dashboard it says key not detected and it was programmed successfully. Do you think it might be the key battery? Any tips or help?
Thanks
Did you figure out? It was difficult after programming then the other key stopped working.
I have connected everything like you. I have mini with bdc. Scanning and keep show me device unable to communicate with control unit
good work pro....but from where I can get this device fem/bdc
I mean a perfect shop
2018 bmw X4 add key with autel im508 - easy or hard, risk level?
Thanks curtis for your videos very helpful
Hi Sal. Its a pleasure. Take care
Whats up my man how much can you get the 808BT for? and how long is the warranty?
Hey my friend. Long time ! That tool has limitations that im not sure your aware of. What I would suggest you do is go to www.auteltech.co.za and click the existing clients service since we spoke before. Then will share with you which tool that will be good for your requirments and also share with you my services . ( There are perks that my clients recieve regarding updates and warranties)
Hi
Can this procedure work on bmw 840i 2020
I'm preparing for tomorrow first time. Only worried about clean eeprom.for clamp. Can I clean with alcohol?
Try to find isopropyl alcohol.
@@AutelConsultancy yes I will use this one. Why I haven't say that I don't know. Thank you for reply.
@@AutelConsultancy isopropyl alcohol and fibre pen or something softer?
great job curtis
Does this work with a BMW 335i 2009?
Hi Curtis can I use this fem bdc and for F10
Hello, I need advice from you! I recorded keys with 315Mhz. many times on FEM, not when there were no problems, everything worked fine. A couple of times I wrote down the keys from 434Mhz to F32. and after that the car starts up, but the radio channel does not work! What could be the problem ? When Fem read, it showed 433Mhz. and I recorded the key with 434Mhz! Do they have a difference? Thank you.
How do i know if fem been unlocked or not prior to taking it apart?
Hi Manny. From my knowledge once you jailbreak the FEM once , you don't need to do it again afterward. I think if you try doing the procedure via obd and it works , it means its jail broken. If you try via obd and it fails then you need to do it again.
Other ways to know that.
Just check number of keys through obd.
@dashtyATG 2013 mini cooper f55 has 4 keys In module
Can I add through obd?
great video thank you for sharing
Hello dear friend. Do I have to have it FEM/BDC or is it a means to comfort at work?
Hi, I've already successfully managed to do this by following the video. HOWEVER we've not lost the new key and the original!
How do we go about making a new key now the FEM is unlocked and I guess we must have a backup? Car is open thankfully 😁
If you just want to add a key then I think you can do it by OBD following the prompts when you select the ADD key option. No need to take out FEM
Hi curtis
Just asking , if I buy the im608 from u do I getting full tech support any time ?
HI Daniel. Great question. The way I am able to help my client achieve results is via an appointment system. This way I can dedicate that hour to assist the client with no interruptions. If its an emergency you can call me as well but If I am on a booking with another client you can email me . I work normal business hours .
Thanks curtis
@@AutelConsultancyhi Curtis can we do add key on a 2021 bmw 1 series with autel im608/508?
@@brentwilson4317 DId you try it yet?
@@AutelConsultancy no that why I'm asking you if it can be done
Curtis, what can i do if all keys lost for bmw, f30? Thanks
Hi, how to programe Bmw Mini Cooper 2003 thru Autel i608 pro please advice me. Thanks
I do bmw f30 2016 model key programming vehicle strat but central looking not working
Hello Curtis,thanks for your educational videos.i o really appreciate.kindly tell me where I can purchase a genuine MK908P. Am based in Africa kenya.
HI Kennedy. If you want results I can sell you the tool directy. I have many clients in Kenya . If your seirous you can book a diagnostic tool consultaiton so I can assess your requirments throroghly and design a package that will help you get the best value. Go to www.auteltech.co.za and book the diagnost tool consultation. Thanks
Hey, off the subject but...Do you happen to know if there is an adapter that will allow the little autel ap200 bluetooth readers to connect to the round 38pin connector located under the hood of mercedes cars?
Hi Curtis You can explain how to find(read) the pin to the mechanical key of the car (all keys lost)with AUTEL MAXIIM IM608 or there is a separate software that can be purchased on a decoder from AUTEL which it does this by VIN NUMBER.
Kind regards
thank you very good training i have autel im 608 pro 👍💪
Hi curt. Quick question is the autel maxiflash (J2534) compatible with the IM508?
Hi Jin, Unfotuntly not. The j2534 is only used with the laptop to do ecu programming. There are other modules the jbox can be linked with but the im508 and 608 are not one of them.
Can you do one for a 2003 BMW 745li slot key?
Скажите пожалуйста. Смогу ли я добавить ключ этим способом в bmw f44 2019?
Can I use my IM508 to add a smart key to BMW 320i 2013? Please let me know. Thank you
Can you do all keys lost this way?
Is the board necessary?
what do i need to program a 2015 volvo s60?
Well presented Curtis
Thanks so much!
gracias tambien trabajas con smartpro de avance
excellent presentation.......all goods.............thanks.......
Glad you liked it!
Hi any online classes for BMW im608
Hello, I dont offer online classes, Just over the Shoulder training
Share how to do all keys lost for Mercedes c180 2001 model using IM608. Key is non functional on ignition or to lock and unlock. Pliz help
Hello my friend do autel give tech support
In UK?
I Waqar I do have alot of clients I represent in the UK yes
Hi can you this procedure with IM508??. Thanks
Thank you Curtis!
My Pleasure. Im glad you enjoyed the content.
I am new in the business and I am lost and I am trying to look for an school or a really good clases so I can move forward. I am working on a BMW 335I all keys lost and I am wondering if I can do this on it.
Hi Lafoca. I dont know what year the car is and I dont know what tool you have but the im608 should be able to do it
I have all keys lost how do you extract the code from the isn
g box and from ecu or over obd some models
Thanks for that, can this be done with the IM508 and XP400 PRO?
Yes, it works.
I really needed this answer!
Thank you.
Hi, after many attempts we just can't get the Autel to read the EPROM. We get the message "Device unable to communicate with the control unit!"
Hello, If you want me to investigate the problem and get my engineers response you can book a diagnostic consultation at my website. Or you can contact your supplier to see if they can assist you .
@@AutelConsultancy thanks but I realised the problem. The clamp supplied is faulty, it just can't get a consistent read so I've ordered an aftermarket one.
Hi! would this work on a 2011 X3 F25?
Nice video, thank you.
Thank you for the video!
My Pleasure! Thanks for the support
Can im508 with kp400 do the same?
Yes thats correct
Hi my friend I want ask you please about xp400 and xp400pro What defrent please 🌹
Pro has more eeprom coverage than teh regular xp400
Great video second to none
Are you located in Los Angeles California ?
HI Paco, I I actually grew up on ontario califnoria, but I reside in Cape Town South Africa. I do represent alot of clients in LA however.
I would really love to get in to autel like everything about it I work on many old cars what we do we modernized them meaning we update engine to present ones And what I used is hp tuners But lately we been getting new cars that need diagnostic and we have to turn them down because we don’t have experience and equipment to help them out.
@@pacotrujillp5576 I see . There has been alot of people who recently been experienceing this same issue. If your series want me to set you up with the right tool and training for the future, go to www.auteltech.co.za and click the diagnostic tool consultation. Book a time slot and then ill call you up on that date and time.
HI Paco, im actually from ontario California but I live in Cape Town South africa.
Hi! I have a 608 and I just purchased it. I want to program a ‘13 Honda Accord. The vehicle has one original key fob. How can I program/add the new key to the car? Thank you
HI Moshin, I hope your doing well. If you would like training on your vehicle , you can go to www.auteltech.co.za and click the diagnostic tool consultation. Ill log in and show you how its done and provide additonal information regarding hondas. Or you should contact your local supplier or autel new york. Thanks!
Can this process be made with im508?
Following
Hola Curtis puedes hacer algún tutoríal en español saludos
Thank you so much
Autel not support to dodge truck 2017 akl mechanical keys manufacturers in italy
How can I get in touch with you...I live in the USA 🇺🇸
Hey James, I I work by apointment only. You can go to auteltech.co.za and click the diagnostic tool consultation. Thanks!
This device not support vag now
What reason
VW/ AUDI Shut down access to their servers.
@@AutelConsultancy shut down Autel's access specialty? Or all third party services?