Good video, especially the tip about cleaning up the tip of the cocking lever, they can be very sharp. I used a similar fix for the HW30S. I took a file a reduced the depth of the cocking lever rather than fit a shoe, a couple of mm and it clears the cylinder. Plenty of meat left in the lever so not weakened in any significant way.
@@tbtairrifletuning1520 I really enjoyed the 48/52 Video and found it very interesting as well as helpful..I was rather hopeful that you would do one on the 98k as im wanting to 'Tune' mine in!😆
![[LIVE] : ONE ลุมพินี 83 วันนี้!! คู่เอก "พันฤทธิ์ vs ซุปเปอร์บอล วันของโอม MBK"](http://i.ytimg.com/vi/1b4pkKHa_Fk/mqdefault.jpg)
Good video, especially the tip about cleaning up the tip of the cocking lever, they can be very sharp. I used a similar fix for the HW30S. I took a file a reduced the depth of the cocking lever rather than fit a shoe, a couple of mm and it clears the cylinder. Plenty of meat left in the lever so not weakened in any significant way.
Good tip, thanks 👍🏻 got a .177 99 today as my .22 was lonely 😂😂😂
They do look better in pairs😁
Thanks for this one. Time to go in there again.
How about doing some more vids about the Diana Rifles!?👍😆
I’ve done one on the 48/52/54. I can only make them for guns I have👍
@@tbtairrifletuning1520 I really enjoyed the 48/52 Video and found it very interesting as well as helpful..I was rather hopeful that you would do one on the 98k as im wanting to 'Tune' mine in!😆
Thats useful. Is there anything for the HW30. Mine has a bad galling problem.
I believe it is the same problem with the same fix👍
My 2023 mod. 50s has about 4mm of barrel droop. Is there a fix?
Email or ring tomorrow and I’ll help you fix it👍