Hearing Tim's name being mentioned made me wonder if Matt will ever do a "where are they now?" video of all the long lost BleepinJeepers? So happy seeing these build videos. Cheers.
Matt, your wife is an amazing person. I was privileged to meet your entire crew at the S.M.J.E. in 2022. Your wife stole the show, IMHO. She is like the other Matt's wife, Jaymie. Both beautiful on the outside, but their souls are absolutely amazing! Love her every day for the rest of your life, brother. I'm pretty sure that she's going to love you for the rest of hers... Blessings on all of you and 'Hey' to the Big Guy! 💛
Just bumped into you guys at O’Reillys in Moab, the WJ looks sick! Let’s see some Moab stuff. I finally had to pull cable yesterday for the first time in three days here, this place is not easy in a short two door jk on 39’s
Your wife is so sweet. Your guys setup in the shop is awesome you make it look so easy makes me wanna do some of the stuff you're doing like suspension building. I'm thinking of leaving mine a little more stock than yours but I enjoy your videos so much
You got my like as soon as you described what is a proper pepperochini, that it has to blast everywhere as you bite. That's proper on the ground food info and I love it, great channel buddy, I'm an avid fan and keen subscriber. I will start building all my custom suspension soon for my channel :)
I can verify, brisket, bbq, onion and peperoncini makes for a real brisket bbq. Also, it’s 8:30 AM and I am on my way to Walmart for a brisket after this video. My stomach just bottomed out and did the big growl. Also, if you ever have the opportunity, a brisket wrapped in aluminum foil with spices, a bit of peperoncini juice and onion, slow cooked over the coals of a fire in the woods whilst on a camping trip, it will be the best brisket you will ever eat…. That’s a fine run-on sentence right there.
I’ve stumbled across you on the other’s posts. This was my first video of yours. First impressions: Your wife is super! Absolutely love the shop From catching you on other videos, I’ve grown to appreciate the way you explain what and why on your tasks. Eating those sit down lunches was never allowed by my father- he would down a bowl of boiling soup in under a minute and then- back to it. I grew up in a shop where we built custom vehicles as well as the daily grind of a local garage. I can appreciate some of the trials and tribulations that y’all experience. Looking forward to seeing what happens in the future.
Matt, good meeting you on Hell Revenge Thursday! I was with GenRight in the firecracker red JL Rubicon. Talked to you once at Devil's Hot Tub then at the Escalator.
i know plenty about airbags going off thanks to Tuff Trucks. Not first hand though thank god. I've seen my fair share of them going off on other competitors...including one I was racing against.
That lower shock mount is super close to the ball joint. You’ll never be able to press that ball joint out. The WJ is looking cool though. It’s actually pretty badass with how much of the rear you guys have cutout. I imagine your going to box it all back in and seal things up. Pretty cool build I look forward to more of it!
This build can not be as easy as you're making it look. "I'll just make a cardboard template of the computer mount." That would me all day. Can't wait for the next episode.
I just bought a 1995 Grand Cherokee ZJ. 5.2 Full time 4wd. I'm installing a 4" lift and want to run 33's. Will the full time 4wd be ok for the trails or should I spend the money to convert? Any advice is welcome.
I'm just curious about how much are these Barns kits, and 4 links? like the most I've paid for a vehicle is $6 grand ,😢 but the build is coming along great, thanks for sharing, all the best to yous and your loved ones
I just showed up to this channel and thought I was about to see a WJ build... Nah, this is a DOUBLE YUUUU JAAAAAYYY BUILD! Holycrap guys! Calm down! LoL Friggen sweet though! Next yall should do a WK because people that couldn't get their hands on a super lift missed out and some people wanna swap em to SA.
Josh how did you delete or move your evap system from the rear driver side?? I’ve been trying to find someone who can tell me how to get it out of the way!
the tube that goes over the engine to reinforce the shock towers in front are you going to make it removable with those inserts ive seen that allow the tube to come out? Incase you need to pull the engine?
I mean, Ford made you drop the rack and pinion steering as well as the bell housing support member just to change the starter on a Pinto. It seems that a plasma cutter and a welder should do just fine for any future maintenance on the Jeep😆
Hey, whoa, how the hang can you afford the parts that go into all those projects?? How can a Veteran a on small va compensation afford all you do?? WTF!!
![⭐ฮิตในTikTok!! ( หมูเด้ง MooDeng ) Ver. แดนซ์โจ๊ะๆ ReMix BY [ ดีเจกิต รีมิกซ์ ]](http://i.ytimg.com/vi/3krsyfWUeHU/mqdefault.jpg)
Hearing Tim's name being mentioned made me wonder if Matt will ever do a "where are they now?" video of all the long lost BleepinJeepers? So happy seeing these build videos. Cheers.
I heard that Tim, Tyler, and Jeremy joined the French Foreign Legion.
Matt, your wife is an amazing person. I was privileged to meet your entire crew at the S.M.J.E. in 2022. Your wife stole the show, IMHO. She is like the other Matt's wife, Jaymie. Both beautiful on the outside, but their souls are absolutely amazing! Love her every day for the rest of your life, brother. I'm pretty sure that she's going to love you for the rest of hers... Blessings on all of you and 'Hey' to the Big Guy! 💛
I luv this build. Stance and ride height with those tires looks so good!!.
Thanks 👍
I will never built a crawler like y'll, but I love watching y'll.
keep watching and maybe itll get you in the right mind set to build one!
Video game music during welding time lapse for the win.
I bet no one has ever typed that sentence before.
Just bumped into you guys at O’Reillys in Moab, the WJ looks sick! Let’s see some Moab stuff.
I finally had to pull cable yesterday for the first time in three days here, this place is not easy in a short two door jk on 39’s
Can't wait to see it crawling! ❤
Love this build ! Great channel ,thank you for all your hard work !
Glad you enjoy it!
Your wife is so sweet. Your guys setup in the shop is awesome you make it look so easy makes me wanna do some of the stuff you're doing like suspension building. I'm thinking of leaving mine a little more stock than yours but I enjoy your videos so much
Thanks 👍
man watching these videos really makes me want to get another WJ and build it bigger and bader then my last one.
You got my like as soon as you described what is a proper pepperochini, that it has to blast everywhere as you bite. That's proper on the ground food info and I love it, great channel buddy, I'm an avid fan and keen subscriber. I will start building all my custom suspension soon for my channel :)
Right on! has to burst all over!
Thanks for sharing!
Thanks for watching!
Nice work on the WJ. Great content guys ☺️. Keep up the great work.
Thanks for sharing 👍😀
Can't wait to see you at Easter Jeep Safari! Love your channel! Keep an eye out for the "Vanilla Gorilla" XJ on the trails
Sweet baby rays!
Haha it cracked me up seeing someone use my hammer on the Dooley wheels trick.
YEESSSS, the wj!❤😂
You get a thumbs up just becouse of Hope, she is adorable. :) + it was a good video ofcourse.
You need a nice high vis paint job on your dust pan. Black is pretty much garage camouflage. 😁
thats a good idear!
If you are ever in Sacramento California, you must try Roxie's deli and BBQ!!!
do they have the pepperonchinis?
@@bleepinjeep in every bite!
love me some xj zj builds! hope to see them in the wild at some point.
come on out to EJS next week!
I can verify, brisket, bbq, onion and peperoncini makes for a real brisket bbq. Also, it’s 8:30 AM and I am on my way to Walmart for a brisket after this video. My stomach just bottomed out and did the big growl. Also, if you ever have the opportunity, a brisket wrapped in aluminum foil with spices, a bit of peperoncini juice and onion, slow cooked over the coals of a fire in the woods whilst on a camping trip, it will be the best brisket you will ever eat…. That’s a fine run-on sentence right there.
mmmm, sounds delish!
Looking good. Josh I have to say I am a little jealous. Can't wait to see you wheel it.
You guys better move that lower shock mount or you'll never get the ball joint remover over that flange
nah, thats like saying we cant remove an engine with a bar welded over the top of it.
@@bleepinjeep that’s why they made a cutting torch. lol
I've seen @bleepinJeeps ball joint remover. It's of the 3 pound variety 😂
They aren’t going to let fear and common sense stop them
They will probably just weld the ball joints solid 😂
“How to eat brisket”‼️‼️‼️
Grumbled in TEXAN so you probably couldn’t understand me anyway.
I’ve stumbled across you on the other’s posts. This was my first video of yours.
First impressions:
Your wife is super!
Absolutely love the shop
From catching you on other videos, I’ve grown to appreciate the way you explain what and why on your tasks.
Eating those sit down lunches was never allowed by my father- he would down a bowl of boiling soup in under a minute and then- back to it.
I grew up in a shop where we built custom vehicles as well as the daily grind of a local garage. I can appreciate some of the trials and tribulations that y’all experience.
Looking forward to seeing what happens in the future.
a good lunch and good lady is the key to a builds success!
lovin it matt and josh
Jeeps, Dr Pepper and Brisket = Best Day Ever!!
"Cuz I love you, Stop looking at me!" 😂😅
Matt, good meeting you on Hell Revenge Thursday! I was with GenRight in the firecracker red JL Rubicon. Talked to you once at Devil's Hot Tub then at the Escalator.
Good job guys. 😊
Best wife and best delivery plate/basket.
Lots of great fab content..I love it . Good video guys
Glad you enjoyed it
Loving the build🔥
Come on over to Texas and we'll show ya how to eat a brisket. Lol. That looked really good, Matt.
Loving the chip-tune songs
it seems like the more tool boxes I buy, the harder it is to find stuff!
i know plenty about airbags going off thanks to Tuff Trucks. Not first hand though thank god. I've seen my fair share of them going off on other competitors...including one I was racing against.
Matt I really enjoy watching your videos. Maybe someday I will be able to meet you guys in person.
come on out to one of our events some time!
Geeze lueez kid, a professional roof cuter can make that shock tower work beyond your newbie dreams!!
Piss on bumble...how bout that brisket! Whew she hooked yall up. Very good looking meal.
I see some bent shocks in the future and great video keep up the good work God bless from GA and stay safe
why is that?
@@bleepinjeep it looks like the pivot angle off and the tires look like they will hit
You guys like to work hard. Nice video.
I keep thinking someones backing up a truck while watching this build at my house and it's just the construction going on at your place 😂😅😂
That lower shock mount is super close to the ball joint. You’ll never be able to press that ball joint out.
The WJ is looking cool though. It’s actually pretty badass with how much of the rear you guys have cutout. I imagine your going to box it all back in and seal things up. Pretty cool build I look forward to more of it!
yep way more to come!
Perfect way to eat brisket! 😋
This build can not be as easy as you're making it look.
"I'll just make a cardboard template of the computer mount."
That would me all day.
Can't wait for the next episode.
You need a Badlands off-road jack
That’s going to be a beast! And now I want BBQ 😁
Ya'll making me want brisket at 8:30am...
Great fabrication. I think it will be a rough job if you have to replace the ball joint covered by the shock mount.
I just bought a 1995 Grand Cherokee ZJ. 5.2 Full time 4wd. I'm installing a 4" lift and want to run 33's. Will the full time 4wd be ok for the trails or should I spend the money to convert? Any advice is welcome.
Matt "Not the right angle" Bleepinjeep
@4:35 how are ya going to remove the upper ball joints? I would have assumed you'd opt for the deletes with the axle out?
I'm just curious about how much are these Barns kits, and 4 links? like the most I've paid for a vehicle is $6 grand ,😢 but the build is coming along great, thanks for sharing, all the best to yous and your loved ones
I just showed up to this channel and thought I was about to see a WJ build... Nah, this is a DOUBLE YUUUU JAAAAAYYY BUILD! Holycrap guys! Calm down! LoL Friggen sweet though! Next yall should do a WK because people that couldn't get their hands on a super lift missed out and some people wanna swap em to SA.
Nice
Your videos really make me wanna buy a plasma torch maybe one day I will haven't decided
its a must, you'll wonder why you didnt have one sooner!
Have you guys tried rocking a plasma from harbor freight of so any thoughts on them? You guys really make great videos love all the content
I here you on the toolbox 25 years ago when we had a shop I just purchased a $45 cart and almost every tool I needed was in that cheap little cart?
Josh how did you delete or move your evap system from the rear driver side?? I’ve been trying to find someone who can tell me how to get it out of the way!
At 3:59, won't that lower shock mount make it real hard to get that ball joint out?
the tube that goes over the engine to reinforce the shock towers in front are you going to make it removable with those inserts ive seen that allow the tube to come out? Incase you need to pull the engine?
I mention this in the next video so you'll have to check it out then!
Are you able to replace the upper ball joint in the future with that lower mount on the axle?
No they won't I was getting ready to comment on that. The tool won't fit over the upper flange
@Rotoregonian68 lol I knew that I was just trying to be polite and kinda let them figure that out. All good brother
everything is replaceable, removable, or meltable!
@@bleepinjeep can't be stuck if it's liquid
I mean, Ford made you drop the rack and pinion steering as well as the bell housing support member just to change the starter on a Pinto. It seems that a plasma cutter and a welder should do just fine for any future maintenance on the Jeep😆
You need to swap that cheap tool tote for a Veto👍
What brand Coilovers are you running
You guys are great . Mat you have a wonderful wife
Did u guys buy the wrench organizers from harbor freight? Those look awesome
Some are from Tekton, some from HF
The ones u have that are bolted to the top of your shiny new orange toolbox are from where? I'd really like to buy some like that
Are you available for a visit this morning
If Josh still has the Dana 30 I’ll come pick it up I’m not to far from y’all.
Hey, no invite grub, what the hang??!!
What do you think of ORI struts?
I like em, I run them on my scorpion crawler
You have good woman congrats🎉🎉
We really need to come work in y’all’s shop if that’s how lunch is served!!! Fantastic 🤌🏼
Man, I was wondering why my foot felt so weird inside my shoe. I forgot to put my sock on..........again.
Hey, whoa, how the hang can you afford the parts that go into all those projects?? How can a Veteran a on small va compensation afford all you do?? WTF!!
shoulda called for the hammer the next time the camera was need/wanted.
Looks like three pieces.
Whos Tim?
Good luck getting that ball joint out after you melted the grease in it! 🤡🤡🤡
no ball joints were harmed in the making of this video
I'm just sayin' - coupon code should be #brisketnbeans