HOW TO Fix hard start issue on '03 International 2574 Replace fuel line and test drive. Cummins N14

In this video, I replace the main feed line for the fuel filter on a 2003 international 2574 dump truck. This truck has the Cummins N14 engine. The truck has been showing a hard to start issue after sitting overnight. Let's see if this solves it!
link to dump truck onboard air blow gun video
• Installing an in-cab o...

[@rickyvasquez3157]

. I did change out the turbo boost pressure sensor. Amazon was best priced. i went ahead and put a kill switch. We never could figure out what is pulling power. Ours started the EXACT same. i'll be doing the same fix in the video next. THANKS!
Can you give us a headlight upgrade. also the component in front of the bumper with the large hose - what exactly is that. we have the same. ours is a vac truck though

[@anyandalldiy6704]

@rickyvasquez3157 you may want to do all the braided fuel lines just to be sure. I know where mine was leaking from so I only did the one on video. The fuel check valve is also a culprit for long crank duration when starting. As far ad headlights, id look onto some 6" round led or hid upgrade. I think there's even a halo style light too. Any 6" round lights should work, you just may have to trim the headlight bucket to accommodate a thicker light.
The large pump in the front bumper is a hydraulic pump, that controls the dump bed hoist. Thisntruck in it's previous life was a countybplow truck, so it needed a large pump to control all.od the extra functions, but all that has since been removed.

[@rickyvasquez3157]

@@anyandalldiy6704 THANK YOU! perfect

[@rickyvasquez3157]

any recommendations for headlight upgrades on this model? we have the exact same model of international along with the N14. Starting is always an issue