my porter cable framing nailer broke the other day. Let's see if we can fix it.
ฝัง
- เผยแพร่เมื่อ 16 ก.ย. 2024
- the other day I was nailing some siding on my barn with my porter cable framing nailer and I was using my shop are as my air source. My shop air is good for about a hundred and thirty-five pounds of pressure. Probably was a little too much for the framing nailer. So I've damaged it I've opened it up the other day and found what part was damaged and ordered a new one let's open it up and fix it.
Thanks a bunch for the video! My uncle enlisted my help to fix his nail gun and with this I know what the problem is!
Thanks for posting. This saved me a ton of time!
This is the video I was looking for. I have EXACT same problem. Just ordered the part. Thanks a lot
Look at my response down in other comments for a link to the part.
Got the part, Problem solved! thanks!
Thanks Glenn, this is exactly what I needed!
Thanks brother I had almost the exact same experience. I am so glad I only had to watch one video prior to finding your video about solving this issue.
Thanks 🙏 I have the same one and this vid shows me what to do and look for. Just ordered a rebuild kit.
Glad I could help
Thank you for this. One day wait for the replacement nailer collar and I was up and running again.
He'll yeah! I've been looking for this!
Same problem on my end. Ordering new part right now! Thanks
I work on nail gyns but 11 year. On that porter cable gun you changed that collar but you should have changed that piston stop in the cap as well. Them two parts are the parts that goes out on that gun. As so remember that porter cable and DeWalt has different types from 1-3
Nice work, thanks for your help.
Thank you sire saved me a lot of money
I have the same one and it works just fine
Thanks and good music also.
same problem, have any idea what's the part #
Can you give me the name of this part? Im facing the same issue starting today. I'd appreciate it.
www.ereplacementparts.com/collar-p-63521.html
Glenn's Speed Shop Thank you!
great video same problem on mine what's the name of the part your replaced elso what pressure is recommended for this tool so i dont have same problem again thanks .👍
Last time I used it, I set the psi to 95. Worked fine.
mine was 120 no wonder why broke 😬😬thanks i will change psi 👍
I have a central pneumatic gun without part numbers my seal is 2.7” outside 2.3 “ inside. Can you provide the seal dimensions you aré replacing, trying to find one that is will fit my gun.
Thanks
The part number is in the comments, perhaps you can look it up and get the dimensions.
I have the same nail gun works fine but sometimes it double nails what could be the problem I am very careful to only pull the trigger once. no matter how slight or gentile I am when I pull it
Thanks Fred
I think you may have too light of a touch on the spring loaded nose piece. You can hold the trigger down and bounce the nose piece one time and it should shoot one nail or hold the nose piece firmly and pull the trigger firmly and should function well. I think your trying to be gental with it and it's more designed for fast production.
October 1, 2022 This is the problem of my PC Framing Nailer: what is the name of the part that you replaced? Let me know and thanks!!
The part number is in a comment...
Great video man thanks. How is it holding up after a few more years?
Great. .. just keep the air pressure below 100! Lol
@@GlennsSpeedShop more is better!
Great screen name lol
Exactly what just happened to mine, same failure
I put a part number down in the comments a while back..
@@GlennsSpeedShop already fixed, found it on Amazon, I did spend a whole day screwing framing together so happy to be back in action. I did order just that part because symptom was exactly the same as well as onset so I was glad it only needed what yours did. Appreciate the insight.
Can someone show the nailer actually working after replacing collar and the piston
My cylinder cap gasket is leaking and its a discontinued part. Does anyone know of a suitable material for this application that i can use to make a new gasket?
What size nails do you use? I have the same gun but I cannot find nails for it.
I bought a case of framing nails and a case of shorter nails at ho.e depot 12 years ago when I bought it. They should be able to help. It's a good nail gun
I went to Home Depot and got the nails the recommended, but they did not work.
@@manniegomez 21 degree nails
@@woodsonlynes997Paslode 30degree clipped head 2-3/8" and 3" work fine in my porter-cable FC350A
Emmanuel did you solve the problem? My nail gun says it uses 34° clipped head nails between 2" and 3-1/2". I cant find them anywhere. Have you tried 30° nails?