Surface Modeling - SolidWorks Tutorial

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 39

  • @haylazkart
    @haylazkart 2 ปีที่แล้ว +2

    Thank you so much teacher, I learned new things. If you want to make one part instead don't use a knit surface. At the beginning you click the ruled surface and then right-click face side you need to choose the loop selected from options and then in surface bodies, you will see one part body

    • @3D-World
      @3D-World  2 ปีที่แล้ว

      Hi, Thanks for your comment 😉

  • @veyselcelik7302
    @veyselcelik7302 3 ปีที่แล้ว +1

    Eline sağlık Üstat çok güzel bir tasarım olmuş çok değişik farklı işler yapıyorsun seyrederken zevk alıyoruz

    • @3D-World
      @3D-World  3 ปีที่แล้ว +1

      Estf. Üstad teşekkür ederim güzel yorumunuz için. 😊

  • @mesutaras6437
    @mesutaras6437 3 ปีที่แล้ว +1

    Çok başarlı bir tasarım olmuş hocam izlerken heycan veriyor gerçekten yeni tasarımlar bekleriz :)

    • @3D-World
      @3D-World  3 ปีที่แล้ว +1

      Teşekkür ederim kardeşim.Çok sagol. 😊

  • @carolinedickey4954
    @carolinedickey4954 ปีที่แล้ว +1

    That was awesome thank you

    • @3D-World
      @3D-World  ปีที่แล้ว

      Welcome 😇

  • @TheShazy
    @TheShazy 2 ปีที่แล้ว +1

    merhaba 16:33 dakika da ki radyusu atamıyorum hata veriyor sebebi ne olabilir?

    • @3D-World
      @3D-World  2 ปีที่แล้ว

      Farklı bir ölçümü kullandınız çizimde ?
      Radyusleri teker teker deneyin kenar seçerek.

  • @zahrakermani9279
    @zahrakermani9279 ปีที่แล้ว +1

    Perfect

    • @3D-World
      @3D-World  ปีที่แล้ว

      Welcome 😊

  • @ndesign2649
    @ndesign2649 2 ปีที่แล้ว +1

    Very helpful 👍

    • @3D-World
      @3D-World  2 ปีที่แล้ว +1

      Hi Dear, Thanks for the comment 😊

  • @latchulatchu7646
    @latchulatchu7646 3 ปีที่แล้ว +1

    Hi I have problems on reading technical drawings. Give some tips and tricks to read technical drawing.

    • @3D-World
      @3D-World  3 ปีที่แล้ว +1

      Hi Dear, best thing to do is practising as you know.
      All we developed our skills by practising. Start from simple objects to complex ones, in addition a good technical drawing book can help you a lot.

    • @w.binder-freecadchannel
      @w.binder-freecadchannel 3 ปีที่แล้ว

      @@3D-World I completely agree with you, practice makes perfect👍🙂

  • @pirnipolesblog9232
    @pirnipolesblog9232 2 ปีที่แล้ว +1

    Bravo!

    • @3D-World
      @3D-World  2 ปีที่แล้ว

      Thanks Dear 😊

  • @DTMD-l2q
    @DTMD-l2q 3 ปีที่แล้ว +1

    Thanks a lot for sharing, Bro. It would be great if you could improve voice recording device, so we can hear you more clarify.

    • @3D-World
      @3D-World  3 ปีที่แล้ว +1

      Hi Dear. In fact I did but was not like how I expect.
      In future I will try again. The money I am making in TH-cam wont cover a cost. It is just a couple of beer money.
      My motivation really the nice comments of watchers

  • @theone-0339
    @theone-0339 2 ปีที่แล้ว +1

    u r amazing bro

    • @3D-World
      @3D-World  2 ปีที่แล้ว +1

      Thanks dear, I appreciate your comment. 😊

  • @w.binder-freecadchannel
    @w.binder-freecadchannel 3 ปีที่แล้ว +1

    Very simple👍🙂

    • @3D-World
      @3D-World  3 ปีที่แล้ว

      Yes it is 😊

  • @aravindhvijayanandan3010
    @aravindhvijayanandan3010 2 ปีที่แล้ว +1

    I think one of the vertices is not properly filleted in the beginning

    • @3D-World
      @3D-World  2 ปีที่แล้ว

      Hi Dear, I did not understand. What you meant ?

    • @aravindhvijayanandan3010
      @aravindhvijayanandan3010 2 ปีที่แล้ว +1

      @@3D-World In the beginning of the video a fillet was missing which you later on rectified. I didn't pay much attention.

    • @3D-World
      @3D-World  2 ปีที่แล้ว

      Good you have sharp sense. 😊

  • @alisaeddesigns
    @alisaeddesigns 3 ปีที่แล้ว +1

    thaaank you

    • @3D-World
      @3D-World  3 ปีที่แล้ว

      Welcome Dear 😊

  • @parvizaghayarov935
    @parvizaghayarov935 3 ปีที่แล้ว +1

    8: 00 crazy time))

  • @alializadeh8195
    @alializadeh8195 2 ปีที่แล้ว

    Thanx

    • @3D-World
      @3D-World  2 ปีที่แล้ว

      Welcome 😊

  • @yooliatretyak9457
    @yooliatretyak9457 3 ปีที่แล้ว

    Please, please make a tray for 6 eggs with a lid 🥺🥺🥺🥺🥺