FSB -- Zero Tolerance ZT0392BRNGLD: Best ZT Ever?

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 76

  • @joepass9141
    @joepass9141 9 ปีที่แล้ว +1

    I was lucky enough to get one of these. They were sold through the official ZT website. I subscribed to the ZT newsletter, and several weeks before they were available, details of the sale were given. This included the day and time. You had to register at their website with all your information. At the appointed time, I was logged in and ready to go. The add to cart icon appeared which I immediately hit. Nothing happened for a few minutes and then I was put into a que. It was made clear that being in the que just improved my chances. About five minutes later, a screen popped up. I had fifteen minutes to claim my prize! I gladly gave them $400.00 an did not even gripe about having to pay the shipping. I own many ZTs and several Hinderers. This is by far the most handsome knife I own. Love your channel.
    Joe from Tennessee

  • @steveottavaino3804
    @steveottavaino3804 9 ปีที่แล้ว

    You speak the truth Rob, I purchased the original 0392 for One All's Pub and it won't be leaving my collection anytime soon. It's considerably less flashy than the BRN GLD version for certain but no less brutally beautiful. A pleasure to fondle and worth every penny. Take Rob's advice folks, if you can find one and have the money buy without guilt or fear of regret.... Thanks for the honest review brother!!!

  • @isaacarnold4635
    @isaacarnold4635 9 ปีที่แล้ว

    ZT: I have three. My 0561 came so-so sharp, I cut some carpet and it dulled pretty fast. It took forever, finally I was using a diamond sharpener, for me to get an edge on it. Now I like it. Next I got a 0630 Emerson. It is a great knife. Lastly, I bought a 0452CF. Detent was so strong I had a hard time opening it, but over time it loosened, it is fine now. I like all three now, but two of them needed attention out of the box.

    • @oksobasically3278
      @oksobasically3278 9 ปีที่แล้ว +1

      The detention breaking in is normal on the 0452 and all knives, and the 0561 uses ELMAX and it gets burned during grinding so you have to grind away the burned part of the edge before it gets sharp again

  • @jesusgarciajr
    @jesusgarciajr 9 ปีที่แล้ว +1

    Never seen a knife that I like so much that showed of the hardware like this. It's almost a industrial/brutalism design touch. The blade shape screams Contego to me. Your commentary about color is hilarious, thanks. Great review.

  • @SwarthyPlinker
    @SwarthyPlinker 9 ปีที่แล้ว

    Lol...aubergine. My wife was listening while I was watching this review and we both laughed out loud. Great review as always Rob!

  • @dseednorwayn47
    @dseednorwayn47 9 ปีที่แล้ว

    ZT one of my favorite brands. "Built like a beast". To me the 0560 and 0566 are the ones I will never get rid off. Fits my hands perfect. Good video mate. Agree them stopping thumbstud not very suitable for thumbflipping in my eyes. have a great weekend

  • @LibertyNotLicense
    @LibertyNotLicense 9 ปีที่แล้ว

    I think you just might be a tease, Rob! I see them for more than $600...but don't have one myself. And, yes, it definitely needed that edge! Beautiful knife and work, brother.

  • @th3buck6969
    @th3buck6969 9 ปีที่แล้ว

    I completely agree with ur statement of "better than a hinderer hinderer" I have a xm18 and a BWBRZ 0392 and the ZT will go in my pocket every time over the hinderer

    • @Seveneleven44
      @Seveneleven44 9 ปีที่แล้ว

      You are crazy. ZT makes a great knife, but I'd take any Hinderer over any ZT every day of the week. I have the 0562CF, it's the perfect production flipper. I can't find anything I don't like about it...but I have several hinderers and in my opinion, there is a huge difference between the two. My hinderers weigh at least an ounce more than the 0560&0562. I'm not saying they are bad blades, but they def don't get the attention to detail a real Hinderer does.

  • @ctaber2011
    @ctaber2011 8 ปีที่แล้ว

    Just bought the 7th of the line, I love the 0392!

  • @05generic
    @05generic 9 ปีที่แล้ว

    Truly exceptional.

  • @sharpdad33
    @sharpdad33 9 ปีที่แล้ว

    Mine was very nice. Well worth the price...better than most customs I've owned. Made so well and outdid my Hinderer and popular maker overbuilt models. Cough cough I'm just not a Harpoon fan sadly.

  • @vitdelrosario1
    @vitdelrosario1 9 ปีที่แล้ว

    Hey Rob there's a little bit of a hum in your audio, FYI. Thanks for the speedy uploads!

  • @Trymr
    @Trymr 9 ปีที่แล้ว

    Wow... A very impressive knife all-around! One of the most personally interesting ZT's I've seen, not even including the aesthetics.
    &Although I'm not a "fashionable" male... (at least as you seemed to intend.. Or in general, heh heh) In being obligated to be fluent in French, aubergine simply means "eggplant." Merely for future reference.
    Great review! Definitely appreciate the high integrity and attention to/eye for small detail you use throughout every video. Always excited for the next review... be it FSB or otherwise!

  • @OLMmedic
    @OLMmedic 7 ปีที่แล้ว

    Yup. Thats why i picked one up. Now i just have to eventually send it out to ya.

  • @swiggamortis5521
    @swiggamortis5521 9 ปีที่แล้ว +6

    What an awesome knife but there is one HUGE problem with it Rob....I can't afford it :(

  • @christopherjohnson2171
    @christopherjohnson2171 7 ปีที่แล้ว

    Just picked up the latest all black one, nice knife.

    • @markscott1739
      @markscott1739 7 ปีที่แล้ว

      Christopher Johnson I just acquired a all black 0392, serial 0065 today. A beautiful work of art that has incredible build and performance. Mine is sharp!
      ZT’s rule.

  • @Howlin000
    @Howlin000 7 ปีที่แล้ว

    I have one, the only downside is that they didn't mill out the handles! It's a sick knife though

  • @Anderdale2
    @Anderdale2 8 ปีที่แล้ว

    Sold on left hand carry option. Why does hinderer not offer this?

  • @EDKG
    @EDKG 9 ปีที่แล้ว

    Huh, and here was me thinking that the Copperhead, aka Mr Aubergine Head, was my ultimate Grail ZT... how naïve I was. Great vid Rob.

  • @dmcguy
    @dmcguy 8 ปีที่แล้ว +1

    Do you offer sharpening services? I would love that mirror finish on my 0452CFM390BLU and 0095BW

    • @TheApostleP
      @TheApostleP  8 ปีที่แล้ว +1

      dmcguy Click on the video linked in he first 3 minutes of all my vids. All my info is in he video and description.

    • @ctaber2011
      @ctaber2011 8 ปีที่แล้ว

      Yeap, he does. Abit of a wait atm though :(

  • @michaelbonade4667
    @michaelbonade4667 7 ปีที่แล้ว

    it is the Eklipse model i want most....maybe not in this color combo.....but its a fantastic blend of frame and alternate blade profile

  • @ChrisJones-fm6wp
    @ChrisJones-fm6wp 7 ปีที่แล้ว

    The fact that this is limited production and has a limited production price really hurts me. I want this knife... but I want it as a user and not as a safe queen.

  • @oksobasically3278
    @oksobasically3278 9 ปีที่แล้ว

    I prefer Teflon washers over bearings too!

  • @sputumtube
    @sputumtube 9 ปีที่แล้ว +1

    Great review (as always) Rob of a beautiful knife. Just a small observation of the vid though (not the knife) - the sound kept falling off and then returning to normal as though you were turning slightly away from the microphone occasionally. Not a major problem, just thought I'd mention it. God bless mate..

    • @soundped
      @soundped 8 ปีที่แล้ว

      +paul greenwood I think that is because of the knife flip causing the built in compression on the camera microphone to kick in.

  • @beefcurtainz69
    @beefcurtainz69 4 ปีที่แล้ว

    The blade measurements seem to make sense to me. They are probably speaking of actual sharpened blade 3.5 and then when you measure to the handle you are getting 3.625, which looks about right.

  • @ctaber2011
    @ctaber2011 8 ปีที่แล้ว

    DId you purchase a 0392 yet Rob?

  • @Realwademasters
    @Realwademasters 9 ปีที่แล้ว

    I'm in love I think I need one except you can get a hinderer for about the same price so it's a toss up I guess

    • @ryanikiman5213
      @ryanikiman5213 8 ปีที่แล้ว

      +Josh Wade I thought the same thing but this has better steel, better fit/finish, better action, and its limited runs.

  • @nogps1225
    @nogps1225 8 ปีที่แล้ว

    Great review Sir!

  • @eugeneBai
    @eugeneBai 9 ปีที่แล้ว

    Thanks for nice review, Rob! But for me this strong detent that you can't open it through stoppins is not a problem. It's a realy PLUS! Because knife is trully safe , that never open in your pocket. I hate week detens!

  • @dubasciver3234
    @dubasciver3234 7 ปีที่แล้ว

    What frustrates me about ZT knives is their limited runs which make it very very difficult for the average knife enthusiast to buy one.

  • @michaelk487
    @michaelk487 8 ปีที่แล้ว

    great knife

  • @rossginn1171
    @rossginn1171 3 หลายเดือนก่อน

    Answer:debatable, at least top 5 in my opinion. I have all of these ZT0392’S and this being my favorite variant I have 3 BRNGLD’s.

  • @IrishDevil78
    @IrishDevil78 9 ปีที่แล้ว

    I had a 392, I liked it, carried for a week. Decided the 562CF is a better knife, IMO. Traded it to a friend for another 562CF and cash. Didn't "love " the harpoon either

    • @cyphersuit1
      @cyphersuit1 8 ปีที่แล้ว +1

      Have both, the 392 is miles above the 0562cf it is not even funny. Especially the pivot sucks on the 0562cf (and 0801).

  • @MrTIPPY30
    @MrTIPPY30 9 ปีที่แล้ว

    nice review. starting to be a real ZT fan. just me but 3 diff colors bit much and the non working thumb studs and redundant travel stops ? nice reach for ZT but for me it misses for true industrial elegance i believe they where shooting for.

  • @cwrowe
    @cwrowe 9 ปีที่แล้ว

    Beyond nice I agree👍

  • @PkwyDrive13
    @PkwyDrive13 7 ปีที่แล้ว

    Mine is serial number 357, just 2 after that one!

  • @aaron-4062
    @aaron-4062 8 ปีที่แล้ว +2

    God I love that look... Why does it have to be so expensive... And limited edition...

    • @Glenn056
      @Glenn056 8 ปีที่แล้ว +1

      what a silly question

    • @dubasciver3234
      @dubasciver3234 7 ปีที่แล้ว

      Glenn056 I disagree. It is an excellent question. Limited runs are offered to ensure good sales and to jack up the price.

  • @tyronejones912
    @tyronejones912 9 ปีที่แล้ว

    I love my ZT562CF

  • @randyparker8009
    @randyparker8009 9 ปีที่แล้ว +1

    Enjoyed and that is a very nice knife. Just thought I would throw this out. But Hinderer people and that 1st also you kind buy a spanner bit # 12 or 14 and it will fit that pivot perfect. I get mind on beat and one seller sells them for 4 dollars and so many cents and that is free ups friend shipping free. I MY be the only person that did not know this. May the blessings of the Lord be upon you all.

    • @jamesfranco7090
      @jamesfranco7090 8 ปีที่แล้ว

      What?

    • @randyparker8009
      @randyparker8009 8 ปีที่แล้ว

      +James Franco It is called a spanner spanner bit. You can get them on eBay they will fit in a screw driver adapter and fits the hinderer perfect.

  • @cwrowe
    @cwrowe 9 ปีที่แล้ว +1

    Is that a easy steel to sharpen? Is it easier or harder than S35VN?

    • @TorlingJarl
      @TorlingJarl 7 ปีที่แล้ว

      204p is up there, it is very hard and will give you a run for your money.

  • @Player_Review
    @Player_Review 8 ปีที่แล้ว

    Not analogous to M390... 20CV and 204P has .5 less silicon. And you were right about 98% of your subs preferring KVT; I have teflon washer knives and the actions are fine, but KVT is superior by far. These were MAV priced at $375, but sell a minimum of $500 on secondhand.

  • @1113jackson
    @1113jackson 8 ปีที่แล้ว

    I like the teflon better also.

  • @christapherdane
    @christapherdane 9 ปีที่แล้ว +2

    Anything that is not brown or red is maroon. :) Texas A&M Grad.

  • @jayunitedwestand1810
    @jayunitedwestand1810 9 ปีที่แล้ว

    rob, is this ZT available anywhere ???

    • @sea9984
      @sea9984 9 ปีที่แล้ว

      +*night_stalker1975 * im selling mine for 450, are you interested? ill take trades too at trade value 500

    • @jayunitedwestand1810
      @jayunitedwestand1810 9 ปีที่แล้ว

      shoot me a email i have a chaves 228? nightstalker1975@yahoo.com

    • @jayunitedwestand1810
      @jayunitedwestand1810 9 ปีที่แล้ว

      email me if ya wanna see chaves 228 nightstalker1975@yahoo.com
      Sea

    • @sea9984
      @sea9984 9 ปีที่แล้ว

      sent already, lets chat there

    • @sea9984
      @sea9984 8 ปีที่แล้ว

      DarkSim77
      We didnt trade in the end so I don't really have a say in this.

  • @OnTheEdge5950
    @OnTheEdge5950 7 ปีที่แล้ว

    Saw one on eBay and the bid was $750.

  • @trubadyr99
    @trubadyr99 8 ปีที่แล้ว

    Too overbuild, too flashy and "billboardish" (being a ZT) knife to my liking. Thank you for your video, Rob.

  • @mattmaiden4920
    @mattmaiden4920 9 ปีที่แล้ว

    B e a u t ful

  • @todaysgrailtomorrowsbeater
    @todaysgrailtomorrowsbeater 8 ปีที่แล้ว

    Aubergine means eggplant. Tastes good deep-fried.

  • @hivemind5137
    @hivemind5137 6 ปีที่แล้ว

    12:17

  • @Whitevaliantwarrior
    @Whitevaliantwarrior 8 ปีที่แล้ว

    Beautiful knife, too much money...

    • @Player_Review
      @Player_Review 8 ปีที่แล้ว

      +Whitevaliantwarrior Not too much money, because you could buy it for $375 and it now sells for a minimum of $500 on the second hand market. That makes it a good investment, well, considering one is willing to part with it.

  • @shcmoly
    @shcmoly 9 ปีที่แล้ว

    I love, ZT this one is ugly.

  • @cullenmcgoran7291
    @cullenmcgoran7291 9 ปีที่แล้ว

    lol im selling mine for 550

  • @willd6515
    @willd6515 7 ปีที่แล้ว

    Aubergine is a different name for an eggplant, hence the colour. Same thing, other name.
    It's not about fashionable, heterosexual or whatever you come up with......... it's about knowledgeable....
    Nice knife by the way!!

    • @TheApostleP
      @TheApostleP  7 ปีที่แล้ว +1

      That's odd... I thought it was about a little bit of humor...

    • @willd6515
      @willd6515 7 ปีที่แล้ว

      I like humor as much as the next guy Rob but not at the expense of other people.
      I"ve seen a lot of your videos and really like the way you look at knives, very informative.
      But it's a knife channel, please keep it that way.
      At the same time i know it's your channel so you are free to say what you want.....
      and so am I.
      I will keep watching them though ;)