Not Just Another Painter Personally think all new build are crap they aren't built like they once was! They chuck them up then put 230 grand on price tag
You guys really gotta go like Fuck to get the shilling out mate,,,,PS, I plastered a 3 bed house out for £23 for George wimpey in 1966,,no ceilings though, they used this revolutionary finish called,,Artex,,lol,, 😂😂😂 Warmest regards and respect from the 72 yo spread,!
Have to say flash is the daddy of the roller ..love the way he rolls those doors with the 9 inch then lays off 30 seconds and the doors done who the fuck would want to use one of those shitty little 4 inch ones ...He owned that ceiling with the 15 inch could watch flash all day .you taught him well candle man lol keep up the awesome vids you truly are top men
Not Just Another Painter say, you're starting with the primer and that, it's a similar sort of way, vanished, handles off, newspaper done etc. When you've primed it, go over it with 180 paper to get rid of roughness from the wood. I'm going to talk about undercoating. I'm going to presume the type of door shown in the video. paint the top and side edge of the door with a 1 inch natural bristle brush or 3/4 inch natural bristle brush, I prefer a 1 inch brush, once you've done that start painting the panels and grooves, start where it meets the stiles, I like to start painting from the door handle side, and work towards the hinge side, first paint one groove all the way down one side and then paint one panel into the next groove. remember as you paint the groove make sure not to get paint on the next panel yet as when you come to paint it and it has paint on it, it will become tacky and ruin the overall look of the door, with with a turps rag or wipes. Once you've painted the groove paint the next panel and then paint the groove, again make sure not to get paint on the panel. Keep repeating until you meet the stile on the hinge end. Now you've got to paint the top rail, bottom rail and stiles. First paint the top rail, I like using 1/2 natural bristle brush although you can use a 1 inch. Paint the top rail length ways where it meet the edge of the style as it will cause problems with the stiles, think of it as a rectangle. Remember to lay off as you with have heavy brush marks and ruin the look, next do the bottom rail and repeat. Then paint the stiles, from top to bottom laying off. That's how I paint that door, might sound complicated and might take too long but if you do it long enough, you will get faster. Also nib off again with 180 and apply the gloss the same way. Can't forget dusting down between coats after nibbling. If you're on a plot use and dusting brush and dust pan or carefully brush the floor with a broom. Hope I helped mate. I don't use a roller, interesting way. But if done too heavy it will cause orange peel.
sorry but flash spelling is as rough as his work on the doors,and embarrased himself letting the world know he's a tesco bargain buyer,we all might do it but never admit to buying cheapo food.
You know some right tools. No question.
WTF was that flash?? I can't remember last time I laughed so loud. You gave yourself the best publicity ever 😂😂😂
That's how I do it pal ,dont even lay the fuckers off
Thank God I missed the Flash years.
Nothing wrong with *SIMMO* the guys a bonafide legend
The picture of him rolling a door with a 12 inch roller 😂 had to see it
9 inch *
anything less than 9 inches is regarded useless 😎
Not much grub for a big boy,id eat that at tea break
The flash couldn’t wipe my arse !
I love this Chanel, one of the funnies episodes yet..Tim
where is the candle man
Hi love your videos can you please tell what nap that roller is he was using was thanks candle man
been asked to paint some ones hse 4doors & frames 22 meters of skirting board in London all in oil based gloss, how much would you charge
No less than 5 grand mate.
Rolled the ceiling , without cutting in ??
They use a corner roller after on the base coat, seen on a different video
👍👍 nice one
The flash is funny as fuck! 😂😂😂
Were are you based? Ever worked for redrow?
Not Just Another Painter I have a redrow house bag of shr
Shit***
Not Just Another Painter Personally think all new build are crap they aren't built like they once was! They chuck them up then put 230 grand on price tag
u ant been on for a while hope u are ok ?
You guys really gotta go like Fuck to get the shilling out mate,,,,PS, I plastered a 3 bed house out for £23 for George wimpey in 1966,,no ceilings though, they used this revolutionary finish called,,Artex,,lol,, 😂😂😂 Warmest regards and respect from the 72 yo spread,!
Old news tell us summat we don’t know !
Have to say flash is the daddy of the roller ..love the way he rolls those doors with the 9 inch then lays off 30 seconds and the doors done who the fuck would want to use one of those shitty little 4 inch ones ...He owned that ceiling with the 15 inch could watch flash all day .you taught him well candle man lol keep up the awesome vids you truly are top men
Peter Amond I think you'll find I taught him 😁😂 btw Thanks
Sam Simpson top man
You don't paint doors with a roller you fools... 😨😨😨
Not Just Another Painter say, you're starting with the primer and that, it's a similar sort of way, vanished, handles off, newspaper done etc. When you've primed it, go over it with 180 paper to get rid of roughness from the wood. I'm going to talk about undercoating. I'm going to presume the type of door shown in the video. paint the top and side edge of the door with a 1 inch natural bristle brush or 3/4 inch natural bristle brush, I prefer a 1 inch brush, once you've done that start painting the panels and grooves, start where it meets the stiles, I like to start painting from the door handle side, and work towards the hinge side, first paint one groove all the way down one side and then paint one panel into the next groove. remember as you paint the groove make sure not to get paint on the next panel yet as when you come to paint it and it has paint on it, it will become tacky and ruin the overall look of the door, with with a turps rag or wipes. Once you've painted the groove paint the next panel and then paint the groove, again make sure not to get paint on the panel. Keep repeating until you meet the stile on the hinge end. Now you've got to paint the top rail, bottom rail and stiles. First paint the top rail, I like using 1/2 natural bristle brush although you can use a 1 inch. Paint the top rail length ways where it meet the edge of the style as it will cause problems with the stiles, think of it as a rectangle. Remember to lay off as you with have heavy brush marks and ruin the look, next do the bottom rail and repeat. Then paint the stiles, from top to bottom laying off. That's how I paint that door, might sound complicated and might take too long but if you do it long enough, you will get faster. Also nib off again with 180 and apply the gloss the same way. Can't forget dusting down between coats after nibbling. If you're on a plot use and dusting brush and dust pan or carefully brush the floor with a broom. Hope I helped mate. I don't use a roller, interesting way. But if done too heavy it will cause orange peel.
Not Just Another Painter With a brush
Ackeh????
Haha savage
sorry but flash spelling is as rough as his work on the doors,and embarrased himself letting the world know he's a tesco bargain buyer,we all might do it but never admit to buying cheapo food.
Paul Brady School boy error my bad ! 😂
Glad he layed them doors off
hash
Paint on his face ... such a disgrace ...
Should be wearing a mask really. Health and safety. Not very professonal really..
Wearing a mask .....what for rolling a ceiling ?
What planet are you on ?
Absolutely no need for a mask ...
where,s the videos looking at other ones boring the sh-t out of me