Hacked Flysky Gt3C (channel mapping)
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- I hacked a Flysky GT3C Yep hacked Flysky GT3C.
n part two we take a look at how to assign channels and map your transmitter. With the eight channel hacked firmware you can assign all channels except for steering and throttle to any button on the transmitter. You may reassign trims and make them exponentials or dual rates or switches. The sky is the limit with this radio.
I’ll show you how I map my TRX4. Shift servo on channel 3 walking differentials on channels 4 & 5. Finally my light controller on channel 6. This is just the way I have my truck set up you can move any of these channels to any other switch using the steps shown.
Cool shit!!
Really helpful 👌
THAT IS SO COOL MAN!! Thanks for sharing brother. God Bless...
Thanks for watching
Dude awesome video, thanks for the step by step guide, very nice!
Yeah no worries hope it helped if there’s anything else she really need to know about this let me know I can try to do a video on it I really need to do some more
Thanks for this video.....I looked for the link on the introduction to programming these tx's but couldn't find it. Can you provide it so I can check that video out as well? Thanks in advance.
Do you know where I can get one? Very hard to find.
I know this is old, but I had a body finished for me and sent my radio so it could be hacked. He installed lights and all was good. I built a brx01 and when I click the ch 3 button it works my steering trim(but it doesn't actually trim that servo) The radio is fine for my other vehicles but have no idea how to set this up. Is there a list of commands? I have no idea what this all is. My other gt3c is not hacked and I know it well. This one is crazy. Any advice. I watched video but not working. thanks.
I need some help setting up my scx 10 2 I have lights and a 2 speed trans do I need a different receiver all I have is the 3 ch ones
So, if you just wanted to power the lights, they know you would not need a different receiver. You could actually plug it into. I believe the very top port, which would basically be used as power on a nitro, but it will bleed power through that and power your lights if you want to control them via your transmitter Then yes, you’re going to need a few things. first you’re going to need a lighting controller. The one I’ve been using is by Apex RC and can be found on Amazon easily or I have a video entitled TRX - four lights controlled by transmitter. You can watch that the links in the description. Also, you’re going to need some of the six channel receivers They are the rand. Flysky receivers they’re great and actually I use them on a lot of things that I use this transmitter for you actually get some better distance out of them. I buy mine from RC addict. You can find this VA simple Google search they are out of Pennsylvania and are amazing if you go under their radios and receiver section, you will see R1.06 channel receiver for your transmitter. These are amazing and they shipped pretty quick. if you need any help setting up your transmitter to control this let me know if you need anything else just leave me a reply and I’ll help you out
I have crab setup on the end button. When I press the end button no crab = crab & crab = 4WS. Thought it would just do crab/no crab instead 4WS. Any idea why?
I don’t have a great answer but I will check out my set up when I get home from work tonight and I will reply to you again I’ll check my set up and go through some of the settings and see if there’s a way to fix this.
Can u help me with my rig please I'm trying to set up dig on one of the top buttons but it's not working properly for me
yeah I can help you get your dig set up. What button are you wanting to operate your dig and which receiver/how many channels are you using? What channel do you want your dig to operate on the receiver? I have my dig set up on thebutton on the handle as a momentary switch where your middle finger would hit it but let me know which switch you want to run it and what channel and I’ll walk you through
That's not working on mine?
Do you have a video on setting up 4ws?
Working on one maybe tomorrow night
Man I have the same exact model remote but when I long press it doesn’t do anything
Just to clarify you have had your radio hacked to the psx firmware correct?
@@LargeeeScaleLife how do you hack it
@@jmiguel250r basically you have to pull the computer board out of it sold her on a couple of pens and use a programmer to do it I sent mine to a place called rc addict they are located in Pennsylvania bought parts and stuff from them before and their service is outstanding I had them do the hack job for me it was pretty cheap definitely the way to go
Once this is done you will unlock all of the features of the updated firmware. This firmware was custom built by God tons of people have used it and it works really well kind of hard to figure out how to program it but once you do it really makes this radio outstanding
Shit looks fully semi automatic 🤣🤣