1999 chevy silverado It worked perfect!!!!! Thank you for your viedo, you did awsome, Also on the jumper wire, Diode is the BEST, BUT BELL wire you use on house wireing is solid copper and it works perfect, Just a suggestion ONLY !!! Thank Diode is the BEST WAY
So I saw a post about unhooking two wires from the bcm under the dash..some 99 Silverados had no option to turn them off..so I unhooked a11 from the middle pluf..cant find the reply from the guy cause to get it so your parking lights stay off was b something .gotta find the post
how did you do it to hve your low and high beams on at the same time? I have a 2000 tahoe how would I do it to put both of them on? ( but only on high beam)
el firulais the way I did it is, I I ran the ground wire from passenger side low beam to the driver side ground wire for the low beam and then ran them both to the bolt.
Hi Edward, just replaced the DRL ( actually all the lights) on my 2005 silverado with LEDs and now they don't comeback on. only time they do its when i un-lock with the remote. what's the issue??
djtoo7 on this vehicle I didn't, on the 99-02 truck you have to ground the high beam somewhere new, but on the 03-07 trucks you can use a diode and it would go from the 85 pin
Hey! My 2000 Silverado’s DRLs won’t come on. The blinkers are always on (low) and flash brighter when I turn the blinkers obviously. But the spot in the DRL is always off. The amber bulbs do work, but the DRL harness gets no power. I just bought the truck. Could it be that the last owner modded it for the DRLs not to come on at all?
Simon Huerta when you first turn on the truck do the headlights come on? On a lot of these trucks the headlight sensor goes bad and the headlights are always on. Meaning the DRL would be off.
Edward Howard yes, the headlights do come on but the DRLs don’t and don’t have any power going in them. One of them had a good bulb in it but never came on
Edward Howard I haven’t done any mods at all. Ever since I bought the truck when I start it and remove the parking brake, the headlights will come on no matter what time of day/light outside. The DRLs have never come on but I did have a good bulb. I overrode the auto on by pressing the dome override 4 times and no lights at all will come on automatically unless I turn the knob in the dash. I think you’re right, the photo sensor on the dash is broken. I think I’m going to connect the DRLs with the parking lights, change the sockets to a turn signal instead of the DRLs and install switchbacks/white-amber on the DRLs and amber in the parking spot.
@@reallife2849 idk if you're still having this issue but I just had this last week it was the wires shorted out and burned up in the blinker selecter arm it was a bit of pain but ran new wiring and fixed the issue
Edward Howard Did the mod and I'm stoked! I have HIDs combined with full white leds on the bottom. Looks icy! wish I could post a pic on here. Next in line is Hids for high beams and low/high all on mod! Later I will add some fogs with Hids as well! Thx again for the vid!
I might not be able to help you with this, but I’m gonna do the same shit. Did anything happen? I bought aftermarket headlights and I’ve got L shaped drls and I wanna run the 25/7 cause they look bad ass
@@alvarovigil9346 no, I bought a pack of diodes, and I put it in the spot he said and it lit up all of my lights at once on my truck without it being on. Plan b is to find a kit or make one for it
Watching in 2022 like "WTF is RadioShack?!!😂
Yeah, the diode gets hot, melts, sometimes smokes. What would be a slightly stronger diode? And why doesn't it happen to everyone?
87 is for main power, 87 and 30, this guys wrong, 85 is the signal pin
1999 chevy silverado It worked perfect!!!!! Thank you for your viedo, you did awsome, Also on the jumper wire, Diode is the BEST, BUT BELL wire you use on house wireing is solid copper and it works perfect, Just a suggestion ONLY !!! Thank Diode is the BEST WAY
I have a 02 silverado and want to do this. You had no problem after doing this
So I saw a post about unhooking two wires from the bcm under the dash..some 99 Silverados had no option to turn them off..so I unhooked a11 from the middle pluf..cant find the reply from the guy cause to get it so your parking lights stay off was b something .gotta find the post
Do the DRL still work in the daytime?
@@24Tunnel on my truck the daylight sensor was broken so the normal DRL function never happened.
how did you do it to hve your low and high beams on at the same time?
I have a 2000 tahoe how would I do it to put both of them on? ( but only on high beam)
Take the ground wire from the low beam, cut it. and send it to its own ground. (the bolt for the bar above the battery worked for me)
Edward Howard thank you I subbed and liked!
Edward Howard another question, is it from the drivers or passengers headlight? or both?
el firulais the way I did it is, I I ran the ground wire from passenger side low beam to the driver side ground wire for the low beam and then ran them both to the bolt.
How do you make the marker light stay on? I did this same mod but the marker like doesn't come on. I replaced the marker light with an led
Video is a few years old hows it holding up with time?
No issues, although this is kind of a back up truck.
Hi Edward, just replaced the DRL ( actually all the lights) on my 2005 silverado with LEDs and now they don't comeback on. only time they do its when i un-lock with the remote. what's the issue??
I did this and now my high beam dash light is on even though my high beams are not on ..?
regards! and with the DRL sensor what did you do? did you take it off or can it stay there?
I didn’t do anything with the sensor
How did u get your low beams to be on with hi beams?
djtoo7 on this vehicle I didn't, on the 99-02 truck you have to ground the high beam somewhere new, but on the 03-07 trucks you can use a diode and it would go from the 85 pin
ok thx i saw one vid on the but didn't think it was a real option.
Did you mean you need to ground low beams? Another vid says low beam negative ground gets cut off when you hit high beams. Makes sense.
high beam right lower beam don't work
@@EdwardHoward1 would you still need to make another ground for an 04 truck or only run from 85 to 85 and that’s it?
Hey! My 2000 Silverado’s DRLs won’t come on. The blinkers are always on (low) and flash brighter when I turn the blinkers obviously. But the spot in the DRL is always off. The amber bulbs do work, but the DRL harness gets no power.
I just bought the truck. Could it be that the last owner modded it for the DRLs not to come on at all?
Simon Huerta when you first turn on the truck do the headlights come on? On a lot of these trucks the headlight sensor goes bad and the headlights are always on. Meaning the DRL would be off.
Edward Howard yes, the headlights do come on but the DRLs don’t and don’t have any power going in them. One of them had a good bulb in it but never came on
Simon Huerta you mean after doing the mod? Factory if the headlights are on the DRL has no power
Edward Howard I haven’t done any mods at all. Ever since I bought the truck when I start it and remove the parking brake, the headlights will come on no matter what time of day/light outside. The DRLs have never come on but I did have a good bulb.
I overrode the auto on by pressing the dome override 4 times and no lights at all will come on automatically unless I turn the knob in the dash.
I think you’re right, the photo sensor on the dash is broken.
I think I’m going to connect the DRLs with the parking lights, change the sockets to a turn signal instead of the DRLs and install switchbacks/white-amber on the DRLs and amber in the parking spot.
@@simonlopez83 were you able to fix it??
worked for me thank u
Would this fix my issue on my 00 k3500 only have low beams at night like daytime light still on if I turn on headlights they all go out .
I doubt it, that sounds like a bigger issue
@@EdwardHoward1 yikes . Thanks for replying! 👍🏻
@@reallife2849 idk if you're still having this issue but I just had this last week it was the wires shorted out and burned up in the blinker selecter arm it was a bit of pain but ran new wiring and fixed the issue
Do your drls still come on in the day by themselves?
Darrell Roireau yes with this mod they will but my daylight sensor is broken preventing that
Edward Howard Thanks Bro! No issues with the diode mod yet?
Edward Howard Did the mod and I'm stoked! I have HIDs combined with full white leds on the bottom. Looks icy! wish I could post a pic on here. Next in line is Hids for high beams and low/high all on mod! Later I will add some fogs with Hids as well! Thx again for the vid!
My running lights dont come on at all man. There are no mods of the truck. I dont even get power to the sockets. Idk what's wrong
Abisai Romero a common problem with these truck is the daylight sensor. If the truck think it’s night time there will be no power to the DRL bulbs
how do you do it for all on with high beams
djtoo7 on the 99-02 the low beams must be grounded to their own ground.
I did this but the diode gets to hot and melts in the center.
Sean Norris maybe try using a stronger diode?
87 pins are main power, not signal power,
@@markbelden6919 so then were do we put the diode 87 and which other one i want to do this mod.
I used a piece a wire, is that correct?
I might not be able to help you with this, but I’m gonna do the same shit. Did anything happen? I bought aftermarket headlights and I’ve got L shaped drls and I wanna run the 25/7 cause they look bad ass
Do I need a diode? Cause I’m doing this tmr, but imma use a wire. Is this fine? Or no?
Did you did it?
@@alvarovigil9346 no, I bought a pack of diodes, and I put it in the spot he said and it lit up all of my lights at once on my truck without it being on. Plan b is to find a kit or make one for it
@@johnfranks7383 tanks i put a wire and it work but then my battery went bad
Used a regular red wire. Works fine.
what diode did you use? Mine keeps blowing the diode.
Paul West 1N4004
87 pins are for main power, 87, 30 both main power,
What diodes are they? I need a part number
Kenbo I think they were 10011
What dio number?
Worked me to
I hate daytime running lights im surprised people actually like them 😑. i dont see the point in them. Lol i like the 4 hi mods tho and 6hi
well I didn't say i liked them, but i figured if they're gonna be there, might as well work at night.
BornToBeFamed , agree, day lights?? Make no sence
and fogs sorry
djtoo7 fogs can be done with the same diode trick as the DRLs