Thank you D.knight Ingram. I really enjoy working on anything that contains a circuit board. I can make parts on my 3D printers if needed. This gal is not afraid to get her hands dirty. I enjoy firing up my CNC machine as well and this summer I will be installing my plasma waterbed table and plasma cutter. Yeah I like my machines. 🤗
@@dustyrhodes2118 hello Dusty. It could a few possibilities. Could sensor issue, belt issue or switch issue. Without seeing your device I can't say exactly.
Thank you David. Yes those belts can finicky. Sometimes I can replace them without any issues but this one decided to give me a little attitude why because I was recording. 🤣
Thank you for posting this. This seems to be a very common issue and perhaps the only reason these get abandoned. We were lucky to acquire one on Facebook Marketplace...for free. The person offering it was basically explaining she had no use for it especially because it doesn't work., but she knew what exactly what was wrong with it. CD quality, 44.1 KHZ at 16 bit sampling, is the next best thing to the studio DAT or the original master tape.
@@irepairidevices As a 48 year old gentleman, I am delightful to see a woman servicing an electronic component. We have WAY too many guys on youtube doing this content. So refreshing to have an intelligent lady for a chance!
Nice cd repair fix question will a lose set of belts cause the devise to not load a cd or is that a different problem the front display just flashes two lines all power is fine it's a technics 60+1
Hello Robert. I do apologize for me not answering sooner. There can be a few possibilities ranging from a belt issue, to a sensor issue or actual board component failure. Without proper diagnosis I can't say for certain.
This is the 4th belt replaceing video I've watched on these machines. However, I don't think the belts are the problem with my unit - I'm sure they should be replaced - It seems to be doing what it should - but it's not reading the discs or playing maybe is a better way to describe it through a compatible Sony system.The 5 disc player works fine. I bought a warrant with it and would love to send it in for repailr - Or am I hooking it up wrong ? It's the same model u worked on.
Hello Sam, without having the unit in front of me the problem would in the power supply board. Numerous components can cause the unit to power On. I would need to have the machine on the work bench to properly diagnosis the issue.
iRepair iDevices thank you for the prompt response and l just listed it on eBay a couple hours ago bcuz l gave up trying as it still almost brand new and thanks again 👍
People mail their units to me. They email me at irepairidevices2@gmail.com providing me information on the unit they are having issues with and I quote them a price and then they ship their units to me.
I have a sony cdpcx355 the belts went bad in the back of the unit and i change both of them they work great. Now the cd won't turn to play the music, it will pick up the cd for several second and then put it back in the tray over and over again and again what can i do to fix the problem. Is it the motor that turn the cd or is it something that tell the motor to cut on Please help thanks Charles
I had the same problem replaces the belts never work again, everything was put back correctly, took apart several times, after like the six-time I threw it out, bought another one, and set it all up, now the volume on the one I purchase doesn't have a sound, What the heck is going on with this things someone let me know how to fix the no sound
There are several possibilities on the problem you mentioned above. You're more than welcome to email me at: irepairidevices2@gmail.com and I'll be glad to quote you a mail in repair price.
Gotta thank you my repairs went without a hitch thanks to your advice and directions. Keep up the great work !
You're welcome Steve. I'm glad my video was able to help you out. Great job getting your repairs completed.
Thank you for this video. Dad has dementia and I fixed his music he’s happy.
Replaced the belts and the player’s working as it should. Thanks for the helpful video!
Hello P Sol. Glad to hear my video was helpful on getting your Sony unit back up and running.
Followed your video and repaired my CD changer tonight. Thanks!
That is awesome Daniel. Glad to see my video helped you out.
It is good to see woman in the repair field know how to fix these mega changers
Thank you D.knight Ingram. I really enjoy working on anything that contains a circuit board. I can make parts on my 3D printers if needed. This gal is not afraid to get her hands dirty. I enjoy firing up my CNC machine as well and this summer I will be installing my plasma waterbed table and plasma cutter. Yeah I like my machines. 🤗
@@irepairidevices The thing that you put cd won't ROATE AT ALL , WHAT DO I DO
@@dustyrhodes2118 hello Dusty. It could a few possibilities. Could sensor issue, belt issue or switch issue. Without seeing your device I can't say exactly.
@@irepairidevices I put THE NEW BELT ON IT WAS ROATINNG IT GOT CAUTE ON THE PLASTIC PART IN THE BACK PART THAT HAS TWO SCREWS .
Nice job Lisa, those belts are finicky things to work with. Regards, Dave
Thank you David. Yes those belts can finicky. Sometimes I can replace them without any issues but this one decided to give me a little attitude why because I was recording. 🤣
Where do you buy the belts? Thank you for your valuable time.
Thank you for posting this. This seems to be a very common issue and perhaps the only reason these get abandoned. We were lucky to acquire one on Facebook Marketplace...for free. The person offering it was basically explaining she had no use for it especially because it doesn't work., but she knew what exactly what was wrong with it. CD quality, 44.1 KHZ at 16 bit sampling, is the next best thing to the studio DAT or the original master tape.
You're welcome Arin.
@@irepairidevices As a 48 year old gentleman, I am delightful to see a woman servicing an electronic component. We have WAY too many guys on youtube doing this content. So refreshing to have an intelligent lady for a chance!
Any chance you can make a video showing the 3rd belt being replaced?
My belts turned to goo and made everything sticky so I had to disassemble the gears and clean them. Any idea what turned them to goo?
I'm looking for a replacement cog that turns the table - any idea where to get one ?
Hi, I have changed the two belts but the CD loads but does not spin.
Would it be possible to have remote support?
How about changing the third belt?
Hello I replaced the exact belts everything work accept the CD won't play keep going in and out the chamber from the eye so what is the problem
Nice cd repair fix question will a lose set of belts cause the devise to not load a cd or is that a different problem the front display just flashes two lines all power is fine it's a technics 60+1
Hello Robert. I do apologize for me not answering sooner. There can be a few possibilities ranging from a belt issue, to a sensor issue or actual board component failure. Without proper diagnosis I can't say for certain.
Hi ,I replaced the belts but graphics are scrambled.I tried to factory reset but it didnt work.
This is the 4th belt replaceing video I've watched on these machines. However, I don't think the belts are the problem with my unit - I'm sure they should be replaced - It seems to be doing what it should - but it's not reading the discs or playing maybe is a better way to describe it through a compatible Sony system.The 5 disc player works fine. I bought a warrant with it and would love to send it in for repailr - Or am I hooking it up wrong ? It's the same model u worked on.
I need an actuator (sp) arm/lever. It picks up the CD and places it in the player. Do you know where I can get one?
Just replaced the belts on mine, winner winner chicken dinner.
Can you please tell me where you found the replacement belts and how much they cost? Thank you.
Hello Ian, not sure where you are located but you can find the parts on Amazon or eBay. I hope this helps you.
@@irepairidevices brilliant, thank you.
Hi I’ve just replaced the belts and is there away you can turn the volume up as it’s low (ie I can just about here it) can you help? Many thanks
Hello Adrian, what speakers and/or amplifier is the Sony CDP-CX355 connected to?
Hi mine has the red button on by standby but when l hit power button turns off won’t powers on ? Have you had this kind of issue before? Thx
Hello Sam, without having the unit in front of me the problem would in the power supply board. Numerous components can cause the unit to power On. I would need to have the machine on the work bench to properly diagnosis the issue.
iRepair iDevices thank you for the prompt response and l just listed it on eBay a couple hours ago bcuz l gave up trying as it still almost brand new and thanks again 👍
Hello, do you repair those for customers?
People mail their units to me. They email me at irepairidevices2@gmail.com providing me information on the unit they are having issues with and I quote them a price and then they ship their units to me.
Sent you an email. Email when you can. No hurry.
Sent you email on information concerning our
MegaStorage 400CD Player.
Thank you.
Where did you get the belts ?
Belts can be found at Amazon or eBay
I have a sony cdpcx355 the belts went bad in the back of the unit and i change both of them they work great. Now the cd won't turn to play the music, it will pick up the cd for several second and then put it back in the tray over and over again and again what can i do to fix the problem. Is it the motor that turn the cd or is it something that tell the motor to cut on Please help thanks Charles
Exact same problem with mine. Can you help us?
I had the same problem replaces the belts never work again, everything was put back correctly, took apart several times, after like the six-time I threw it out, bought another one, and set it all up, now the volume on the one I purchase doesn't have a sound, What the heck is going on with this things
someone let me know how to fix the no sound
@@donmorgan6552 I have the same problem.
I wish I watched you first
Were you able to get your unit fixed?
You never replaced the third belt as you said it had. It has most likely weekend or turned to goo. Most do not replace this belt.
The third belt was in good condition. It did not show any signs of weakening or fraying. The unit is still running strong.
Please can I have one of this mega storage player
my cx355 loads then unloads does not spin
There are several possibilities on the problem you mentioned above. You're more than welcome to email me at:
irepairidevices2@gmail.com
and I'll be glad to quote you a mail in repair price.
I left a message requesting a quote...thanks
STOP! Just remove the Back Cover to Replace any Belts, Motors, or Switches.