$100 Cheap Jeep Bumper Build - Operation Cheap Jeep
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- In this video lets build a rear offroad bumper for operation cheap jeep!
This video brought to you by Pull-A-Part. If you're not familiar with Pull-A-Part, they're a self-service salvage company in the US with 25 yards in 12 states. They buy cars, sell used auto parts and sell used cars. Here is a link to their website: bit.ly/PullAPar...
Ep 1: Project Cheap Jeep Commencing… • Project Cheap Jeep Com...
Ep 2: Cheap Jeep Tour… • Cheap Jeep Tour
Ep 3: The Work Begins - Operation Cheap Jeep… • The Work Begins - Oper...
Ep 4: Cheap Jeep - A Rare Find at the Salvage Yard… • Cheap Jeep - A Rare Fi...
Ep 5: Angle of the Dangle - Operation Cheap Jeep… • Angle of the Dangle - ...
Ep 6: Angle of the Dangle - Operation Cheap Jeep… • Angle of the 2nd Dangl...
Ep 7: Redneck Alignment At Its Best - Operation Cheap Jeep… • Redneck Alignment At I...
Ep 8: What is Cheap? - Operation Cheap Jeep… • What is Cheap? - Opera...
Ep 9: Look at My Grill - Operation Cheap Jeep… • Look at My Grill - Ope...
Ep 10: What to Look For at the Salvage Yard - Operation Cheap Jeep… • What to Look For at th...
Ep 11: I got 99 Problems and the Cheap Jeep is (Part 1)… • I got 99 Problems and ...
Ep 12: I got 99 Problems and the Cheap Jeep is (Part 2)… • I got 99 Problems and ...
•Ep 13: $100 Cheap Jeep Bumper Build - Operation Cheap Jeep… • $100 Cheap Jeep Bumper...
Ep 14: Make Your Own Spool by Welding Your Gears! - Operation Cheap Jeep… • Make Your Own Spool by...
Ep 15: Why Does My Battery Keep Dying? - Parasitic Draw Test and Fix - Operation Cheap Jeep… • Why Does My Battery Ke...
Ep 16: NP249 to NP231 T-Case Swap - Operation Cheap Jeep… • NP249 to NP231 T-Case ...
Ep 17: I Bought Cheap Tires - Operation Cheap Jeep… • I Bought Cheap Tires -...
Ep 18: Operation Cheap Jeep VS Scorpion Crawler - 4X4 Maiden Voyage & Shakedown for the Jeep Grand Cherokee… • Operation Cheap Jeep V...
Ep 19: How to Super Flush your Cooling System in One Easy Step - Operation Cheap Jeep… • How To Super Flush you...
Ep 20: Cheap Jeep Walkaround - BleepinJeep’s Grand Cherokee… • Cheap Jeep Walkaround ...
Ep 21: How Much Did It Cost? - Operation Cheap Jeep… • How Much Did It Cost? ...
Music by Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons...
If a BleepinJeep video has ever helped you consider returning the favor by:
• Supporting us on Patreon here: / bleepinjeep
•Buying a T-Shirt Here: www.bleepinjeep...
•Or Just leaving a kind comment on FB here: / bleepinjeep
This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.
08546
![[Watch Party] RoV Pro League 2024 Winter | with Moowan ( Bacon Time Vs Talon )](http://i.ytimg.com/vi/CCEDhu6dPN8/mqdefault.jpg)
I thought it was going to look ugly but WOW it turned out to look amazing. really good job
Same! As soon as he did the angle piece by the tail light, because of the tail light, I was like nope nope nope. Then I was wrong lol
southseapirate1 me to lol
@@TheWolverine-rm2kr dggssxvvzs
Damn that bumper turned out badass looking! One of the best video's on here in a long time, love seeing these fabrication video's! Thanks
I was so turned off on this bumper when it had the tail light parts hanging over but the addition of the triangle flares (done with magic at 17:25:20 - 17:25:21) made all the difference. Those turned out awesome and I want to start welding and then make one just like it for my ZJ.
man I need a plasma cutter
I say cut 4" holes in the blocks under the lights and weld on some tabs for reverse/work/or dust lights
That bumper looks better then most of the ones you can buy for 300 to 500 bucks
This has not only been the most satisfying video ever in TH-cam history but the best looking damn rear bumper build ever
thanks, make sure to sub... we have lots of good ones!
BleepinJeep oh trust me I am
I thought it would look really ugly at first, but surprisingly, with the black paint it has a really low profile look to it. Good job!
+Vaktrus thanks!
1:20 lmao me every time I work on a car because I live in the north and everything has rust
As someone who has had to struggle with a ZJ rear bumper before, I hate to say it but it makes me feel happy to watch someone else struggle with it.
I don't comment much but just wanted to take the time to say thanks so much for making videos. Hands down my favorite off-road channel. People seem to correct and complain alot here but the mistakes you make are part of why the channel rocks. It isn't a channel claiming to preach the gospel, just the best you can do at the time which is what we're all doing out here! You're great to watch and insanely good and the filming and editing part as well. Better than some ACTUAL off-road shows out there even :) Keep doin what your doin.
Now that is a real bumper and all you need now is the skid plate under that very vulnerable fuel tank. My Suzuki Sport has the thin skid plate as a standard part , thin being the bad part of the skid plate. great video with good music that is not drowning out conversation as so many others do.
It's not a bleepin jeep video without Matt! Good job, lost it laughing when u come out of nowhere with the bfh.
How much would it cost to repair a bumper on a jeep grand Cherokee mountain edition or someshit is has little cracks and someone wants me to buy it idk if I should becuse I feel like the bumper replacement will cost like 500$$$ and I cant even find the damn bumper for it
Glad you did some final capping on the bottom of those canted corners. Really cleaned it up
Hey Matt, Thanks for not giving up on rusty Jeeps. Those of us around the Great Lakes truly appreciate it!
These videos have made me appreciate people with built ZJs even more now. These make XJs look so simple
that's the best looking bumper I've ever seen for a ZJ... all the expensive aftermarket bumpers I've seen aren't nearly as nice as this one... by the end of the video I was gonna ask if you could build me one, then you made it clear why you wouldn't lol... keep up the great work and I'm still loving the cheap Jeep project
+noturfriend421 thanks!
Not sure I like the angles cut in the fender area, I'd have gone with a straight cut, personally, but the rest of the bumper looks pretty amazing!!
i dunno i'd put the rockhard above this one because of how well it blends with the body but this one does look better than quite a few of the bumpers you can buy
It is also nice to extend the bumper out 4 inches from the vehicle, plate the top, and then you create a nice step to stand on to get to the roof rack.
Thank you for doing what you do. I feel more confident to tackle bumper builds on my ZJ and WJ now.
You sir, are the Mr. Rodgers of Jeep mods...Great vid :)
I was thinking bob ross but yee
Glad you angled the ends to match the angle of the top piece. Looks awesome.
This is maybe the most glorious mod video I've ever seen.
Hey man, thank you for making these videos. I am not just a cheap jeep fan , I am a cheap jeep collector. I've had three different grands and three different regular cherokee's and although they have all got plenty of frustrating little traits that can aggravate even the most patient man, their positives ( so far) have consistently overwhelme the negatives in my collection. Like a lot of us, that have children, rent, or even worse house payments ( and the unexpected little emergency repairs that go along with it), car or truck payments, and on and on, for a ton of us, there is nothing left. So if we want ANYTHING we either have to build it ourselves, or just watch others have fun. My problem with my jeeps has been my fear of unibody's, and not having the modern welding equipment that makes life easier when working with them. I have sat down countless times behind the hatch and in front of the hood with some really cool sound ideas that would have been unique, functional, and stout, but every time I get close, I second guess myself, lose confidence, and begin to doubt myself, ESPECIALLY when it comes down to mounting stronger ( heavier) armour to a vehicle made mostly out of a low quality Tin foil. The Last Time I sat staring at my back side, I considered incorporating the same system that you did with yours but again, I pussed out fearing that if I did crunch into something or pulled with it a tiny bit to hard ( not that that could possibly happen) it would basically disintegrate into a perfect Murphy's law exhibit. You have gave me hope where before I had little if any! By God now I am going to finally scab it on there birdshit welds and all haha
Nice, watch my latest new years resolution video for more!
The best part is having all the required fancy tools, good for you!
Working on building me a happy place/garage.
I would like to build a gas tank with a heavy duty skid plate to protect rear-end explosions Jeeps
Biggest problem. Your bumper it a step in the right direction!
Thank you. This could help save lives.
The force is strong with this one
thanx for selling such a high quality bumper for a hundred bux - my order was processed fast and shipped the next day - best hundred i've spent so far on my jeep lol
This is the video that hooked me on bleepinjeep and got me on the quest to update my ZJ
Some one who is down to earth and explains stuff congrats u earned a sub
That's the coolest bumper!!! 😁👍👍
my hinest opinion, that looks way better then what they sell at local stores
i really like that you give a time estimate for the project featured in the video !
i never keep track of my hours and sometimes wish i did, but i might be better off not knowing how many thousands of hours i sent working on a $700 xj
was kinda skeptical on the bumper at first but it turned out really cool! much better looking than half the "custom" bumpers people make
I think it's awesome how you show what actually happens when trying to remove rusty old stuff on jeeps. Love your videos!
$100 and still better looking then some of the ugly crap online, looks awesome
You have a great talent, Looks really good. Jeep would never had needed the gas tank recall if they had a bumper like that.
Loving the Cheap Jeep videos. I just got another 93 ZJ that I have to fix some mechanical issues then start working on the rest.
Did not see your vision at first and was questioning your choise of rectangular tubing, but damn the finished product looks great.
Love how you tied off to the tree! Badass! That's the way to do er man!
dude you rock! my buddy from work told me about your channel. I have a 98 grand cherokee and want to restore it for cheap hopefully. I am nowhere near as talented as you though. Great work and you gotta subscriber!
That bumper/ structural support beam is RAD! It looks really good
man you have good skills . good hands and tools . that plasma cutter its best. imagine cutting all that thick metal with those discs.
just advice for the next guy lock two bolt together, for the rear bumper studs to come out. it'll take some patience, but it can be done. And then soak them in oil, and use a wire brush to remove the crud and then resoak them and good as new haha
From underneath use a small 6” pipe wrench and spin it out. Try heat on the nut inside of frame.
It’s called plasma for a reason.
I've just come across your channel by chance and saw this video. I gotta say I'm a subscriber! With the great content which you make entertaining and interesting. You also have a calming voice that sounds like you have zero stress. All in all I'm impressed with the video and will be watching more! Thanks for the great content and sharing.
I've got a buddy who has an international scout and all he does is take a railroad tie and drill the right holes to mount it. Just replace it if it gets smashed
Conner Hart Holy shit do you realise that a meter of RR tie weights over 200kg?
I mean,that thing is going to move like a slouch.
@@lazar2175 the railroad tie is the wood bit.
@@aidanmakinster922 Where are you from?
Here in Europe i almost never see wooden ties, almost exclusively metal or concrete ones, hence my comment.
The metal ones are also shaped almost like a bumper so there's that.
I'm a Yota guy, but I can't stop watching you're videos man. Keep em up.
Matt, another great, helpful, useful, fun, educational diy jeep grand cherokee video. Thanks for all your effort..
Love the free advertising for Weigles!!! (Gas station he is fueling up at)
At first I was wondering wtf you were doing couldn’t be more surprised good shit man
That bumper is sick
Hearing you say and then witnessing you clean up, I almost fell over.
I’m a clean freak and can’t work until it’s straightened up.
I'm glad to see that the pull truck is a Tundra and you do actually own something that is reliable (that old pickup)
What I wanted to see was some armor plating for the gas tank. It's for this reason, I generally don't regularly put the family in it any more.
That sledgehammer moment was unexpected but awesome
The rear bumper turned out looking pretty nice.
Interesting DIY project but a not cheap bumper. The time and labor involved in this project are extraordinary and require expensive tools and skills, the cost of the materials is secondary and incidental. Great video and I love being a witness to it. thanks for sharing the creative process involved. it is a kind of adventure.
I'm jealous of your mad welding skills
Damn, he made that look easy 😓. That’s a sick ass bumper. 👍👍👍
I recommend that you leave a small distance between your bumper and the body of the jeep, since in the distance that is now, if you hit something the bumper will completely deform the jeep back
The finished product looks great!
you've gotten badass with that plasma cutter my friend!
My first video of yours, and easily the best Jeep TH-cam video I have ever watched! Thanks, and I cant wait to watch the rest!
That's a kick ass bumper!! great video
i like your style before i thought you are crazy but your work is good, you use the plasma like a pro i like you
dang thats awesome looks super professional
Wow man, you get better and better at this!
I dont own a jeep. nor do i wish to own one.. I dont need any of the things that you do... but I cant stop watching your videos! great job m8
This is one of the first ever bleepinjeep videos I watched years ago, but on an old account. So technically it's been double thumbed by me now 👍👍
that bumper is baddass im going to attempt one now
Dude you call that cheap i like it man it looks legit
Bumper looks great
you need some armor for that gas tank hanging off the back... I could see hitting that sucked out on the trail
zach wright technically it does, thats a plastic skid plate under the steel tank. i know not much but its something
zach wright Or maybe explode if rear ended. An actual recall for our zj's....wtf.
Kevin spacey can't he get one under recall?
Those plastic tanks are FAR tougher then steel ones, you'd have to hit it pretty hard. It also sit's higher and is somewhat protected by the rear axle.
animefreak5757 as for off roading or blowing up?
wow matt, you really went out of your way with this video, this is what we like to see, long and in depth detailed video . keep up the good work, I would also like to purchase some of your shirts.
So fun doing the hitch recall at the dealership... those studs never come out up here in Minnesota. Just did one today.
Never thought of using 2x6
I like that idea
damn that looks awesome. you could send those measurements to JCR.
solid job. came out looking mint
great job Matt. It came out nice.
wow, I was wondering how that was gonna look good, but that looks mint.
That gas station you were at is really close to my mom's house. I stop there to get coffee before going home to SC
I'm impressed. Well done.
Very encouraging Matt. Great Job!!
That skirt wrapping around the bottom of the gas tank gives some protection to it from the front of the rear bumper in the event of a 20 mph + rear end collision. Just don't get rear-ended, you'll be fine... Oh, and wear a fire suit.
Haha your intros for the cheap jeep vids are hilarious
Bumper looks really good. :)
Nice Shop...with ALL the rite tools !
that bumper is cool
one of the best videos to date. great work.
Awesome Bumper!
Those welds are art
I was thinking the same thing.
Matt keep up the great work! Without you there wouldn't be as many bleepinjeepers on the road!!!
talented skills Matt -awesome bumper
Matt, you are the goat.
A name brand off-road bumper company wants $3600 (including shipping) for the winch front and matching rear. I want to build this for my truck so bad. Thank you for the inspiration.
Awesome job! Your videos are always great, keep up the good work.
nice work, bumper turned out pretty good
Excellent video! Interference fit bumper! I like it.
Great video. Great use of music. I envy your fabbing skills and your shop.
The bumper looks good I agree. You made it to where you can put a hitch in and tow with it and also hook up chains to pull someone out of need be but, if your towing a trailer it better have some long safety chains owf not then you have no way to hook up the safety chains coming off the trailer itself