iPhone 6S screen replacement / digitizer glass and LCD reinstallation instructions
ฝัง
- เผยแพร่เมื่อ 26 ม.ค. 2016
- www.LaptopScreen.com step by step detailed guide on iPhone 6S disassembly and reassembly and screen replacement (front assembly: LCD, Glass Digitizer, Frame)
- วิทยาศาสตร์และเทคโนโลยี
sitting here with a new iPhone 6S screen that works is unbelievable! I appreciate the delivery of this content in a manner that is a little slower than some others. It allowed me to pause at specific places and replace various parts I may or may not need. Great job! Also, wonderful job at making me feel like I'm a tech guru!
Thank you Chelsea, glad it helped you! We try to make our tutorials concise and "straight to the point" with voice-over for every necessary action.
Great vid, I was a little nervous at first but as I went on follow the detail instructions my install was perfect thanks.
Great to hear!
Thanks for the detailed video. Reconnecting some of the ribbon connectors was a bit tricky because of the sticky goo around the connectors. But a careful scraping and removal of the adhesive residue seemed to work. I now have a fully functioning iPhone again. Thanks so much!
Unbelievable... I did it! Success! Your video and the step-by-step instructions on your website were extremely helpful. Also, from another page, I downloaded a screw chart page and printed to keep all the pieces organized. Thank you!!!!!!!
Michelle P where did u find that page🤪🤩👍🏽
Nice video, thorough, straight to the point with a very good step by step.
I have repaired mobile phones before of various types but I have never done an Apple product before which I was always led to believe was not an easy job and should only be done by trained technicians, but you probably couldn't have explained it any better than you did in your video, at least you made it very clear and easy to understand
Thank you for the great video 😁👍
There are other instructional vids for this but yours is far and away the most clear. Thank you. My screen is now all mended. What a faff though!
Best I PHONE 6s video I have seen. Very informative and easy to follow.
I spent 30 mins to reassemble the audio module but it works fine. thx for the great vid!
I’m about to do my first 6s screen replacement for my oldest daughter to play on safely with out getting cut by glass. Any tips or recommendations? Is it easier then I expect it to be? I feel confident!
The most detailed tutorial ever, love it.❤️
Excellent video. Repaired phone with no issues, step by step
Fantastic!! The only thing i would suggest is to download the iphone 6s screw template . Your video is 100% fool proof . Thank you very much.
UNBELIEVABLE WALKTHROUGH. 5 STARS.
I just followed this video and successfully installed a new digitizer screen. I had ended up tearing a piece from the camera assembly, but I guess it was just a strip to hold something together and didn't have any wires through it because everything works correctly. Great video.
I fixed mine, thank you so much. You made my screen replacement a whole lot easier.
Thanks..... superb guide...I rescued my phone because of you.....
I thought I fucked up at first but then it worked, thanks!
best iphone 6s lcd digitizer replacement guide i seen on youtube.
Thank you! Worked like a charm and saved me money!!
Bro, you're awesome, I just fixed it. Thank you!
Thanks man. I was able to replace my sisters screen with out too many hiccups.
Nice vid...the thin black sheet on the face of the heat shield,if that sheet is taken off will that affect the screen in any type of way?
You described it very good 👍
Great video!
Excellent video - needed this to have confidence to do it but pretty straightforward with it!
Thank you! Hope your repair went well :D
Hi I bought a iPhone 6 screen but I lost the second plastic piece at the very top of the phone I have the round one but not the square one does it matter if I have it.
Does the short screw go on the top or on the bottom of the large metal bracket that has 8 screw holes? I put it on top.
My son and I can’t get the damn screws on the side ( the 3 screws on each side). I don’t know why, but they will not come out. Is there a trick to get them out? Something to do to make them come out? I’m about to use wire cutters or something...lol
Great video !! Very useful for me
Nice and easy. Very good video!
Awesome video, to perfection !!! Fixed my replacement screen!
Does it just come with the screen it self or with tools?
whats the screw driver you used???
Excelente guide, it works for me. Thanks!!
the display assembly connector screws i had were stripped
Same with mine - no amount of force would get any of those 6 screws on the sides to budge. I just cut those six screws on the sides of the assembly off with wire cutters. Followed everything else and the phone works great.
I bought a screen but doesn't have the home button connector. How can i transfer where the home button connect ?
Thank you. My iphone are live again :)
Well explained and detailed.
How to fix small bubble i the corner upper right?
Brilliant step-by-step tutorial. Thanks a lot.
If i have a iphone 6 a iphone 6s sccren that cant work yes or no
thank you for very informative video
Thanks dude now I can fix my friends phone with out paying 150 to fix it
what pushes man to his limets trying to surive in a rain forest, no trying to live through a plane crash, no fixing a iphone 6s screen, yes
I've repaired an iPhone with a broken sim tray on a plane once, using an earring.
Who else is watching this on a cracked phone?
มีวันนี้เพราะพี่ให้ครับ
Thank you, your VDO helped me replacing my phone screen
can i test the replacement screen without removing the the orange protective film? the store i bought it from voids th return/replacement warranty if i remove any film from the screen
Yes, you can test it with film... but the store's policy may not be enforceable in many jurisdictions around the world. If you used a credit card or PayPal to make a purchase they may be able to void the payment in-case the item isn't working and the merchant isn't accommodating you.
Thank you so much. Happy new year.
I can't figure out how to put the ear piece and front facing camera back, the pieces don't seem to fit properly
U have to remove a little rubber on the new screen m8
For some reason my front facing camera isn't pciking up. Any ideas. I feel I put it in correctly.
this really helped me out thank you for posting this
Does the 3D Touch still work?
If I am replacing the screen from my old phone to the current one, do I still have to take out all those parts out first or I can use my old good screen with the home button attached?
You might have to use your old home button and the camera, but you can try.
fixed it, just whoever does it make sure your tools are quality and you make sure you know exactly where he screw goes because some of them are different in length
I took 4 out the 6 screwws, the other 2 are stuck... should i cut them?
I just bought a screen and I tried to install it but I get light yet no display
Another video I watched did not have the battery disconnect step. I'm trying my second new screen install and neither of them have worked. I searched find another video to see if I did anything wrong, and found yours. This is the one possibility that I can see. Any thoughts on the battery disconnect?
Its better to disconnect the battery. Its not mandatory, but it helps to prevent any connector mishaps. A short can happen when plugging in the connector if its misaligned. The short can affect the back-light and other peripherals. If your phone's new screen is dark, you can try shining alight through it and if there is an image, but no back-light, then you know your back-light power supply is down. Unfortunately that would require low level component repair or a logic board replacement.
Great content! I don't usually comment on vids unless they're worth it. Thanks a lot!
Thank to u i was able to get my brothers iphone screen fix and working!!
Can I use the screen from another phone?
Hey my iPhone 6s replacement screen only came with 2 ribbons not 3. I turned phone on just to see if it would still work and it did. What’s was the third ribbon for
Ribbons, as in connections at the top? 1 is LCD another is Touch - that's what most replacement parts come with. 3rd is camera - it is transferred during repair. 2:00
Hey man the 3rd ribbon is the camera go ahead and switch it over. And if by any reason you guys damage anything is if you aren't fragile with the ribbons I'm currently sol cause a ribbon was forced back in causing damage to the internal piece. Also the parts online are super cheap I broke my button ribbon in the process and had to replace.
Why my front camera and ear speaker not working after changed my LCD 😭 help me plz
Thank you so much
Where can I get the screwdriver than you used to unscrew the 6 screws that were holding the metal plate down? The one that came in my kit isn't working!
Rana Batshone Mines Either I did everything right,,But When Ii Tried To Remove To six screws ii couldnt😩😩😩 So Ii Had To Replace Everything Back 🤦🏾♀️
I cannot take the big metal shield off, the screws are impossible to take off. Any advice?
You could drill out the screw caps.
I did this . The charging logo popped up but now it's dissapeared and won't pop up again .... any ideas?
This looks hard for a 13 year old to do..but I'm going to try
Bro, you've got a better chance than most adults.
I have i phone 8 plus . Damdeg with salt water .. nothing work more .. how i can fix it?
Good job
The best instructions
Was this a us bought phone?
very good tutorial, it worked perfectly for me and i saved £55 :)
Is it okay if I don't remove the protective film? (The red plastic)
Maybe, but how will you sleep at night knowing that you have a removable protective film still inside your phone?
Hi, I couldn't remove the six (6) screws at the sides of the metal shield, it was impossible, the are fixed. Do you have any suggestions how can I do? I'll really appreciate then, thanks! Great video.
You would have to drill them out if they are stripped. Or get a better screwdriver if the screw heads are still catching.
What am I doing wrong ? the connectors never want to stay in place
Unable to activate touch id on this iphone what should I do
This really helped me so much thank you!
Thank you for your video....my 1st time replace screen ip6s plus succes!!!!!
I did this without disconecting the battery, and the home button no longer works, but when replacing the original screen it works just fine, do you know why this could be?
Peter Kaufinger hello. I think this is late but I did the same thing. But my screen is completely dim. I can’t even seen the screen.
supper work
Is it normal for some of these screws on the inside of the phone to be loose? My screen was shattered but never opened, when I opened it I noticed multiple were loose and I’m wondering if that caused my screen to only want to turn on sometimes?
Its not typical, no. Most screws even have paint to prevent vibration induced unscrewing.
Thank you sooo much! Took me some time, but now i have an «new» iPhone 6s!
Worked perfectly ... piece of cake thanks!
3D touch still work in any type of Iphone 6S display?
It'll depend on the type of replacement display you get. Since the phone is rather old and not a lot of people are willing to pay Apple hardware prices, most replacement LCDs available for it today would at-best have 3D touch simulation - not actually working, but the OS will think that it is. You'd have to get a refurbished Apple genuine display to get it truly working.
Boss very very nice
I did this and I missed the step of taking the batter cord out of the phone and now my screen is completely dim ://
wat did u do? same thing here
How do you solve it? Sadly I did the same thing
I cant turn off my phone because my screen is broken so is it okay if my phone dies then I do it?
open the screen remove the battery then continue
thank you so much!! your video helped A LOT ! I fixed my iPhone Screen :)
Where I get lcd
Great tutorial however I put my ribbon cables back and the screen is not coming on. Took them out and back in still nothing. Any ideas??
You dont need to unplug the battery, I replaced a new screen without unplugging the battery and it worked well.
Malik, correct, unplugging the battery is not required to replace the display in the iPhone. However, it is an easy extra step to prevent the potential damage. Damage may occur when connectors are being aligned with their sockets and leads touch parts of the connector that they were not meant to touch - which may result in a blown back-light or a broken proximity sensor. While this only happens when the connectors are specifically misaligned - it is none-the-less a common occurrence with the first time installers, so doing the extra step is totally recommended.
thats bad advice. always disconnect the power when working on electronics. with the Iphone 6S you can damage the backlight.
also it was not mentioned you need to be extreamly carefull disconnecting the screen flex cables. don't use force and use a plastic pry .
Thank you so much I did it😍
Cool! The feeling of accomplishment when the device you're working on turns on and functions
properly - priceless!
That was the best explanation ever man, keep doing videos i support you 100%
Thanks, will do!
may i know what is the use of that black backplate? im having trouble touching my phone, when I am playing Mobile legends, I can’t control the controller for walking. Is it the black backplate that causing problem?
it's the digitizer
My boyfriend is the best at first i was affraid it nah go woke but at the end it work my phone is working an i was planning to take it to the technician
Thanks for this video. It helped me so much!!!!!!!!!!
Does this fix a phone that has lines going through it and glitching loads with an unresponsive screen
Also looks like it’s melting
Thanks
Did anyone's battery fry because of not being able to turn off the phone while fixing it? Just asking because I'm scared that my phone won't work from it.
Thanx Bro..
I feel like this is the same guy that makes RunForTheCube videos.
The TH-cam is a deep mysterious place,
All things considered,
Neon green gloves are required.
Since 6s don’t forget the adhesive seal that goes around the screen
thank you.... but you dont take the plastic cover for the camera..