What is that little orange pull tab behind the black paneling above the canbus in the trunk? * You can see it towards the upper right of the frame at 2:17 .
Hi, this is only way to connect device? I would like to install aftermarket parking sensors, but I dint find wiring diagram to put it on reverse light power. Thanks.
Top class work. I have a question. Have you used two separate XBB power units (one for light bar and another for reverse lights) with just one XBB dongle? I want to add a light bar and reverse lights to my car and wondering if I can use 2 xbb power units
Hey I need help. Just tried to change my rear lights from standard to the ones with LED turn signal. It’s a pre-facelift Car. Just won’t work. Any tips? They blink red and brake lights orange.
Hi not 100% sure but is definitely not plug and play you need to repin the cables and also it may need some coding before working properly on a pre facelift!
Sir just a quick question, is there a way manually adjust the height of the steering wheel? It only goes forward and backwards, I just noticed it now. Thanks so much have a great safe healthy week ahead of you. God bless😇🙏
@@JohannPietsch sir yes it makes low normal sound forward reverse down and up but it still doesn’t go up down only forward and reverse. Very much obliged again for the reply
Har sedan innan kopplat XBB till främre ledrampen så därför har jag redan en OBD II dongle och denna är kopplat till samma system. Kolla här så förstår du. www.xbb.se/sv_se/xbb-dongle-xbb-powerunit/
@@jooelrockefeller det finns en signal i receptet där vi även läst ut bagageluckans position, sedan så har jag skapat en utgång som drar när antingen luckan är öppen eller när backljuset tänds.
As usual, the best DIY Mercedes content on youtube! So relaxing to watch your videos!
Thanks to Innoware Development and Standby Eu for sponsoring this quality products, more information in description.
Good morning our Friend from NYC
Vallah your videos and your work are fantastic.
Your video editing skills are getting better and better! Keep the work up my friend!!
Thanks for pointing that out it glad me a lot because I put more and more time to these videos.
@@MB212 Yes, we as fans see and appreciate your effort in your videos!
You are among a few others the iconic TH-camrs of the W212!
THE best on TH-cam 👏👏👏
Thanks 🙏
Now you have to install wiper blades to clean those lights underneath, unless you live in sunny Florida. .. LOL
Eliminated one problem and got another one damm 😅 Sunny Florida kinda not.
What is that little orange pull tab behind the black paneling above the canbus in the trunk?
* You can see it towards the upper right of the frame at 2:17 .
Looking awesome, show us the strobe as well please!!
Yess probably trying it out later on!
det är fint
Snyggt
Look good
Hi, this is only way to connect device? I would like to install aftermarket parking sensors, but I dint find wiring diagram to put it on reverse light power. Thanks.
How can I get this product?
Top class work. I have a question. Have you used two separate XBB power units (one for light bar and another for reverse lights) with just one XBB dongle?
I want to add a light bar and reverse lights to my car and wondering if I can use 2 xbb power units
yep u can connect 2 powerunits to one dongle.
Dobry kanał 🤌
Hey I need help. Just tried to change my rear lights from standard to the ones with LED turn signal. It’s a pre-facelift Car. Just won’t work. Any tips? They blink red and brake lights orange.
Hi not 100% sure but is definitely not plug and play you need to repin the cables and also it may need some coding before working properly on a pre facelift!
Sir just a quick question, is there a way manually adjust the height of the steering wheel? It only goes forward and backwards, I just noticed it now. Thanks so much have a great safe healthy week ahead of you. God bless😇🙏
Seems that your electrical motor is broken in your steering assembly. As far as I know, there is no manual way if you have the electrical version :(
Does it make any sound when pressing the lever upwards?
Yes Sir makes normal low sound
@@JohannPietsch sir yes it makes low normal sound forward reverse down and up but it still doesn’t go up down only forward and reverse. Very much obliged again for the reply
Behöver man koppla på utgång 2 för att de ska funka ihop med bakluckan? Eller görs det i appen?
Utgång 2 är ström matning till relä, den kan kopplas på annat sätt så som batteri polen med en säkring.
@@MB212 tror vi missförstår varann.. Hur har du gjort för att de även ska lysa när du öppnar luckan?
Har sedan innan kopplat XBB till främre ledrampen så därför har jag redan en OBD II dongle och denna är kopplat till samma system. Kolla här så förstår du.
www.xbb.se/sv_se/xbb-dongle-xbb-powerunit/
@@jooelrockefeller det finns en signal i receptet där vi även läst ut bagageluckans position, sedan så har jag skapat en utgång som drar när antingen luckan är öppen eller när backljuset tänds.
Another good stuff... ehh i should record movies of my 4 retrofits done month ago :)
Would actually be really nice to se the retrofit. You should video upcoming projects 👍
No нужная опция....