Matthew Laster is great: he gave the most thorough and understandable tutorial on the Lowrance that I've seen to date. I've bookmarked it for future reference.
i just purchased 3 Lowrance 12" Ti2s for the first time and it sure helped a lot watching this webinar. Thanks for all the detailed information. Looking forward to keep on getting smarter with all these webinars.
Lowrance advertise Ti2 chart plotting interconnecting with a MotorGuide Xi3 for a kayak application yet neither party provides a KILL function/mechanism should the craft overturn OR if one was to fall overboard, please clarify and advise???
Great job diff between 9TI1 and TI2......considering buy TI1 from individual w/totalscan trans...Does the if it has never been powered does the warranty start when I register it or did it start with original purchase....Or there will be no warranty...
I have an Elite Ti2 and would like to know if it is capable of showing the "white Line" on the bottom and if so how to get to it. Also what is the quickest way to go to a waypoint that is already in the device.
If I have 2 TI 2 will they both run off one 3 n 1 transducer wirelessly or do they both need a transducer example I have TI2 at console will what the console wirelessly connect to front unit or does the front unit need the other transducer hope that makes since
I have a Elite Ti2 and was wondering if I can use the newer 3 in 1 transducer that comes factory fitted in my new boat ? Also is the Triple shot the same as the 3 in 1 transducer?
So Fish reveal works great on Down Scan, But it would be great if it worked also on Side Scan! You have to hunt for an object on side scan because its the same color as everything. Fish reveal would be awesome! Unless it's already available and I can"t find it.
There is an Elite Ti2 bundle that comes with an Active Imaging sonar which enables both downscan and sidescan. The unit as it is can display both sidescan and downscan but you need a sonar with both capabilities as well to complete the equation
I have a 9” Active target Carbon Lowrance up front I want to buy this lowrance for my consul would the active target would work as well with this unite together
ActiveTarget will not work with the Elite ti2. Also you will not be able to share sonar returns between the Carbon and the ti2. You will need a ethernet connection to do so.
Trying to find info for hooking NMEA net work to Elite TI2 to Ghost TM . Does Compass Puck hook to NMEA or direct to Ghost. Could you do a simple drawing showing which wires go where?
I just subscribed and watched some of youll videos and they are super helpful 👍 I installed a elite ti 2 7 on my outback and love it. The only problem I have is I fish for 10 hours straight most days and battery does not keep up. What size battery do you recommend im using a 12v 7ah acid now
Is there any video information for connection with the nmea cable, especially how to set up for fuel usage, fuel used, ect.. I cannot find anything about setup about this. I have the Elite TI2 9.
I would really like to see you guys do a video on how to calibrate set up and use the fuel side of things. I really have not seen anything on doing this stuff, especially on a unit like mine....Thanks for the response Lowrance.
We'll pass your request over to see if a video can be made. Meanwhile you can contact Suzuki to investigate on their part number: 990CD - 88170 Suzuki harness cable is also needed: 990C0-88136
How do you change the setting for the mapping. I accidentally chose coastal instead of inland and I have no details of any inland water at all. Thanks Matt
I have NMEA 2000 hooked up from my Yamaha to my Lowrance Elite Ti2 9 and I can't find the engine hours. It shows a lot of other things but not engine hours. How do I get the engine hours on this graph?
Hi, have a question I do not seem to be able to get an answer to anywhere. Noticed that I get 2 different depths when I run 83khz and 200khz and also medium chirp and high chirp! I see, for example, that the bottom is 5 m, but on the plotter it shows about 6 m? If I change from 83 to 200 khz, the plotter can also show 5m. So if I look at 2d and see that the bottom is eg 5 m but on the actual data layer on the display it shows eg 6.5 m? Seems like it shows type 2a reading as when it is hard bottom, and reads it instead. And then it will be completely wrong when you map up maps. Do you have any idea why this is so. Have talked to some friends who also have Lowrance because I thought there was something wrong with my sensor (Ai 3-1) But they had the same problem. Seems like it shows the right depth on data storage as long as you use 200 khz, Regards // Mattias What I mean is: the bottom is where it shold be and the sidebar shows the right depth,but the overlay depth shows wrong.
I'm thinking about adding a HDS 7 bow unit to my Elite 9 TI2 console unit in my boat. Can I network these two? Or does it have to be HDS to HDS and TI2 to TI2? Can I network with a Ghost trolling motor that I'm thinking of buying?
Yes you can network the two units but only via NMEA2000, and they'll be able to share the Ghost trolling motor via N2K. But if you want to share sonar and charts, then you will need another HDS or a new Elite FS unit.
I am getting a 18ft boat with a minn kota spot lock trolling motor, so which Lowrance fish finder do I need? I am wanting the sonar, I am looking to get a 9in monitor
And also how do u connect 3 d to it or can u ? Sorry about all the ? But I really would like to get 2 of them just need to know before buying them also do u just attach ur trans to back of boat and it will pick it up u don't have to run trans wire to back of unit ? Lol iam lost .
The place it is installed in makes a difference but you should still be able to operate it without getting burnt. Please contact us via FB if you think it's an issue.
Can you help please. Confusion getting clear answers on nmea2k and Ethernet (which has no port on back of ti2 because of wireless networking. So Have studied your and others video * Can more than 2 elite ti2 be wirelessly networked? I’ve heard no Also * will NMEA 2k work for waypoints etc ? Again there has been different answers. I will have 2 ti2 9” on the bow & a 12” at the console. Without Ethernet how can I make all 3 talk? I know the one at the bow has the trolling mtr transducer. But what if I want all 3 to pickup etc etc
You will not be able to wirelessly connect more than two Elite ti2 units. NMEA2000 will transfer newly created waypoints on the go, you will not be able to share saved waypoints. You would need an Ethernet connection between units to achieve that, and the Elite ti2 series does not have that feature. You can indeed use the trolling motor from every units on the boat via N2K, but you will not be able to share sonar with all 3 units.
Dear Metthew! I would like to request information about ELITE 12 Ti2 and HDS 12 Live. The brochure shows that the display resolution is 1280x800 for both devices, but the Elit has TFT while the HDS has an IPS panel. Is the image of the two devices the same with an active imaging transmitter? In addition to the benefits of the IPS panel, is the displayed image different for the Elite 12 Ti2? For me, only the displayed image is important and in this respect I want to choose between the two devices. Thanks to András from Hungary (Europe)
Can I install the transducer to my MinnKota Terrova trolling motor? I am getting mixed messages about adding it to my trolling motor from your tech support folks. I really want to be able to use it when moving but I can use my helm unit/transducer for that. I’d love to use the bow mounted ti2 while moving but if my only option is to mount it to my trolling motor I guess I will have to live with it. Thanks
You could install the transducer on your trolling motor, although you should check what adapter you need to mount the transducer you have in mind. As per controlling the Minn Kota from the Elite Ti2 is a no go.
@@lowrance Your tech support folks said there is no bracket to attach the transducer to the Terrova. If you know what bracket would work kindly pass it along to me. Thanks for your reply
I purchased a elite 12 ti2 in November ‘22 and I’ve had nothing but trouble, it’s “ghost tapping “ to the point that’s it’s unusable I’ve contacted Lowrance support and it took 3 phone calls and 2 hours to convince someone it’s still under warranty Who can help me with this?
Does this unit read/recognise the various forms of micro SD cards that are available these days? eg. SDHC, SDXC? the original micro SD cards are no longer in retail circulation
I had HDS12 side imaging when the boat is moving the sketch line in midle show surface water how deep the line too large how to adjust it into sketch line Thanks
I think if you communicate two Elite Ti2s. You have to chose which is the active, and which is the slave. This is from what I read, because I can't afford two Ti2's at this time.
Mightiflier Do you mean two TI2's on a NMEA 2000 Network sharing one transducer? I'm confused. I'm wanting to install two TI2's on my console but use one 3in1 Transducer. Thanks
@@erniesanders3724 Over my head, brother, I think they work off their own WIFI. I might buy an extra Elite Ti2 in the near future to mount up front since I do a lot of trolling motor work up front. That way I can use the WIFI from the rear mounted Ti2 to connect with the front Ti2 so I can view what is under the rear mounted 3-in-1 transducer. I've just seen this scenario mentioned in a couple of Lowrance videos, and have successfully hooked up a Kindle with my current Ti2 in my garage. However, I don't think the two Ti2s could be primary at the same time. But honestly, I am pretty new to many of the features of the Ti2. I will probably buy a transducer to attach to my "up front" trolling motor, but use both with one being the primary and the other the slave, as I mentioned before. I believe they share waypoints and trails. Hopefully, someone will read this and correct me if I am wrong.
My unit doesn’t recognize my transducer, how do I fix that.... my charts and down scan work, however my side scan only shows the line in the middle where the boat is.... I’m losing my mind!
Here's troubleshooting for selecting your transducer: www.lowrance.com/help-and-support/?guideTitle=Transducer-Selection-Guide&guideId=003-997 or if you need further assistance, please reach out to us on Facebook PM or just click "Contact Us" on our website. Thanks.
Hello, I just got the Lowrance elite Ti2. my question is. How do I get the sound for the fish when it comes under my sono my last lowrance hook seven I was able to have the sound whenever I fish came under the radar.
If my transducer is hooked to elite unit at console and I have xi5 at the bow with nmea hooked to the front elite monitor hooked up wirelessly to unit at console can I control the xi5 from both units
The Elite ti2 can only be connected wirelessly with another Elite ti2 and they can only share sonar, charts and waypoints. If they are all hooked onto the same N2K then yes, you'll be able to control it.
Thank you Good video I was looking at getting to of them the 9 ti2 I was wondering when u set the home unit on dash and the other on bow well the home picks up the trans from the back of boat and the front is set for trolling motor I don't understand that or does both read from back or how do u set the front to read from trolling motors trans ? Thank u so much for ur time .
How do you make your own mapping chart, WITHOUT having to upload it on internet? WHITOUT using Genesis Live that never stop mapping and move the contourlines around the boat.
The quick release system sucks big balls mine falls down when running on smooth or choppy water the graph pivots down it want tighten no more to keep the screen up facing me but I have found a flush mount bracket not sold by lowrance that will mount to my dash an mount the unit at a angle an stationary no dam falling down an moving an bouncing around when running
You don't need a bracket, just remove the caps on the 4 corners and you'll see a small hole in each one. Using the template that came with the unit or do your own, make your cut, run some bolts through the holes and whaallaa.
The will have some communication if you connect them via NMEA2000. Bear in mind you will not be able to share sonar nor chart, as you would need ethernet for this to work.
Whoa! Just went to Amazon and the reviews of this model are terrible. The fact that you can create charts is fine but you apparently cannot upload charts created by other users in the Lowrance Community. Every single review on the first page were negative saying (Do Not Purchase) etc. This sux because I was just about to click Buy Now but I decided to look around some more. I’ve been off the water for the past 10+ years and fishfinders are almost alien to me now as they have changed so much. The thing that drew me to Lowrance was thst I was trying to find a Fishfinder that can BT connect with my new Mercury Vessel View so I don’t have to use my iPhone or iPad and Lowrance popped up but looks like it may take some kind of extra module or something. I’m so comfy? Lol 😂
You will need to create an account with C-Map genesis in order to download other's sonar logs. The Elite ti2 series is out of production now, but it is still one of the most used units and, despite the reviews, is one of the most popular and loved ones.
After two years using my Lowrance, I can say " I don't recommend this brand". 1. Worst customer service, they receive calls only from 9am to 4pm EST. 2. It works properly one of every 10 times. 3. Cursor acts like crazy and show you destinations with out avoiding obstacles going to one point to another (never navigate with this unit at night, you will end in the beach or over a sand bar or over rocks).
We're sorry to hear you feel this way. Please reach out to us so we can see how to help with the issues. www.lowrance.com/contact-us/ You can also send us a private message on Facebook. We will be happy to troubleshoot and check what options are available. Thank you.
How do you change the setting for the mapping. I accidentally chose coastal instead of inland and I have no details of any inland water at all. Thanks Matt
You can network them via NMEA2000 but that will not give you the chance to share sonar nor maps between the two units. You will need an ethernet connection for that, and the Elite Ti2 does not have any ethernet port.
Matthew Laster is great: he gave the most thorough and understandable tutorial on the Lowrance that I've seen to date. I've bookmarked it for future reference.
i just purchased 3 Lowrance 12" Ti2s for the first time and it sure helped a lot watching this webinar. Thanks for all the detailed information. Looking forward to keep on getting smarter with all these webinars.
This Gentleman did a Great Job explaining this unit. A lot of Simple Minds in the comments!
Thank you! I got the TI2 for this past xmas 2020 and I am still learning.
Hi there quick question
Would a 16” Lowrance carbon work with me carbon 9” active target thank you
Lowrance advertise Ti2 chart plotting interconnecting with a MotorGuide Xi3 for a kayak application yet neither party provides a KILL function/mechanism should the craft overturn OR if one was to fall overboard, please clarify and advise???
Great job explaining everything. Thanks.
Why not print the operating manual for Elit 9 in Hebrew, please take care of it
Best advice . He's always great
Great job diff between 9TI1 and TI2......considering buy TI1 from individual w/totalscan trans...Does the if it has never been powered does the warranty start when I register it or did it start with original purchase....Or there will be no warranty...
The warranty period will start with original purchase. It is probably outside of warranty period.
Absolutely awesome video, thanks heaps
I have an Elite Ti2 and would like to know if it is capable of showing the "white Line" on the bottom and if so how to get to it. Also what is the quickest way to go to a waypoint that is already in the device.
If I have 2 TI 2 will they both run off one 3 n 1 transducer wirelessly or do they both need a transducer example I have TI2 at console will what the console wirelessly connect to front unit or does the front unit need the other transducer hope that makes since
I have a Elite Ti2 and was wondering if I can use the newer 3 in 1 transducer that comes factory fitted in my new boat ?
Also is the Triple shot the same as the 3 in 1 transducer?
Yes, the AI 3in1 is compatible with the Elite ti2. The tripleshot transducer is the totalscan version for our Hook2/Hook Reavel series.
Do you need to unplug transducer when putting in gps numbers when out of water ???????
I've been trying to find out if Active Target connects to Ti2 12"???
No, the ActiveTarget is not compatible with the Elite ti2. You will need to have an Elite FS, HDS Carbon or HDS Live.
So Fish reveal works great on Down Scan, But it would be great if it worked also on Side Scan! You have to hunt for an object on side scan because its the same color as everything. Fish reveal would be awesome! Unless it's already available and I can"t find it.
yep; they could do it with a software upgrade, I bet
There is an Elite Ti2 bundle that comes with an Active Imaging sonar which enables both downscan and sidescan. The unit as it is can display both sidescan and downscan but you need a sonar with both capabilities as well to complete the equation
@@engineer_alv he was looking for fish reveal on side scan. Currently not available...
Can I connect a motor guide xi5 to it? If so is there a video
I just purchased the Elite-9 Ti2. I’m in OKC, would you be up for showing me more about this unit sometime this Summer?
You can check our dealer locator and enquire with them about any classes going on.
www.lowrance.com/dealer-locator/
I have a 9” Active target Carbon Lowrance up front I want to buy this lowrance for my consul would the active target would work as well with this unite together
ActiveTarget will not work with the Elite ti2. Also you will not be able to share sonar returns between the Carbon and the ti2. You will need a ethernet connection to do so.
Trying to find info for hooking NMEA net work to Elite TI2 to Ghost TM . Does Compass Puck hook to NMEA or direct to Ghost. Could you do a simple drawing showing which wires go where?
the TM compass goes attached to the pedal.
Any plans to have the Ti2 control the outboard hydraulic pack?
There will be no more updates for the Elite ti2 series.
@@lowrance Thanks for the quick reply :)
How do you see Rivers in this unit? Are they loaded, or do you need to add a card? Example: Rivers in Virginia?
I just subscribed and watched some of youll videos and they are super helpful 👍 I installed a elite ti 2 7 on my outback and love it. The only problem I have is I fish for 10 hours straight most days and battery does not keep up. What size battery do you recommend im using a 12v 7ah acid now
I use a 20ah/12V battery for mine in a portable ammo box. Lasts two full days before I need to charge. Goodluck
I used to have a compass showing on my charts page but can't find a setting for it. Was it taken off with the latest update?????
Outstanding how to....many thanks!
Is there any video information for connection with the nmea cable, especially how to set up for fuel usage, fuel used, ect.. I cannot find anything about setup about this. I have the Elite TI2 9.
You can look into ref. 000-11517-001 and ref. 000-11522-001 We would also need to know what motor you're using as you will need a NMEA2000 interface.
@@lowrance I have a 140hp Suzuki
I would really like to see you guys do a video on how to calibrate set up and use the fuel side of things. I really have not seen anything on doing this stuff, especially on a unit like mine....Thanks for the response Lowrance.
We'll pass your request over to see if a video can be made.
Meanwhile you can contact Suzuki to investigate on their part number: 990CD - 88170
Suzuki harness cable is also needed: 990C0-88136
So any Ti2 will link together, doesn't matter on Screen size? Cause I want to run a 9" at the helm and a 7" on the bow.
No it doesn’t.
Does the ti2 12" come with the transducer?
Our units usually come with the transducers. Bear in mind the Elite ti2 series is out of production, make sure to ask the seller about the transducer.
What’s the procedure for getting my C-MAP chart sent from my Console to the Bow unit? Thank you
You will need to have the units connected via ethernet in order to share chart and sonar.
Can this be hooked up to a Honda outboard to obtain instrumentation readings?
Please double check with Honda on the use of ref. 06326-ZX2-000EU
Great stuff guys!! Thanks
How does the detail of side scan compared to hds
How do you change the setting for the mapping. I accidentally chose coastal instead of inland and I have no details of any inland water at all.
Thanks
Matt
Is it possible to network these Elite units with a repeater to boost the wifi signal to go maybe 500 years?
This cannot be done.
@@lowrance That's not what your tech support people told me (although they did not specify yardage limitations).
I just purchased the 12 TI2. I have few questions. Is it possible for someone to reach out?
Hello Robert, thank you for purchasing our products. We suggest you to contact our service department or send us a message on Facebook.
I have elite fs series. Can I run it out of water to do update
Yes, you can run the unit of water to do the updates. No transducers should be connected, unless you use the Stop Sonar feature.
Hello!
I just got my elite Ti2......
Do I have to be on the water to set up my unit ??
Hernán Cortez No you don’t.
Can you cover how an Engine interface works for engine data displaying?
Thank you for your interest and suggestion. We'll pass it on to our team.
I have NMEA 2000 hooked up from my Yamaha to my Lowrance Elite Ti2 9 and I can't find the engine hours. It shows a lot of other things but not engine hours. How do I get the engine hours on this graph?
Go to
Home > Settings > Network > Device List > Yamaha Interface > Data
If you do not see it there, then your motor does not give you Engine Hours.
Hi, have a question I do not seem to be able to get an answer to anywhere. Noticed that I get 2 different depths when I run 83khz and 200khz and also medium chirp and high chirp! I see, for example, that the bottom is 5 m, but on the plotter it shows about 6 m? If I change from 83 to 200 khz, the plotter can also show 5m. So if I look at 2d and see that the bottom is eg 5 m but on the actual data layer on the display it shows eg 6.5 m? Seems like it shows type 2a reading as when it is hard bottom, and reads it instead. And then it will be completely wrong when you map up maps. Do you have any idea why this is so. Have talked to some friends who also have Lowrance because I thought there was something wrong with my sensor (Ai 3-1) But they had the same problem. Seems like it shows the right depth on data storage as long as you use 200 khz, Regards // Mattias
What I mean is: the bottom is where it shold be and the sidebar shows the right depth,but the overlay depth shows wrong.
Can you connect 3 elite ti2 units?
Only two Ti2 units can be wirelessly connected to each other.
I'm thinking about adding a HDS 7 bow unit to my Elite 9 TI2 console unit in my boat. Can I network these two? Or does it have to be HDS to HDS and TI2 to TI2? Can I network with a Ghost trolling motor that I'm thinking of buying?
Yes you can network the two units but only via NMEA2000, and they'll be able to share the Ghost trolling motor via N2K. But if you want to share sonar and charts, then you will need another HDS or a new Elite FS unit.
Don't want to sound dumb (but I guess I am). What does N2K stand for? Thanks for your speedy reply.
Hi Ted, we have not forgotten you ;-)
N2K= NMEA2000 ;-)
Will the TI2 work with Minn Kota V2 wireless trolling motor?
I am getting a 18ft boat with a minn kota spot lock trolling motor, so which Lowrance fish finder do I need? I am wanting the sonar, I am looking to get a 9in monitor
If for "the sonar" you mean ActiveTarget, then you need to go for an Elite FS, or an HDS Live.
And also how do u connect 3 d to it or can u ? Sorry about all the ? But I really would like to get 2 of them just need to know before buying them also do u just attach ur trans to back of boat and it will pick it up u don't have to run trans wire to back of unit ? Lol iam lost .
Can I have 12inch tdi on console then a 9 inch at trolling motor and WiFi them together?
I’ve noticed the touch screen on my Lowrance gets pretty hot to the touch at times. Is that normal?
The place it is installed in makes a difference but you should still be able to operate it without getting burnt. Please contact us via FB if you think it's an issue.
Can you help please. Confusion getting clear answers on nmea2k and Ethernet (which has no port on back of ti2 because of wireless networking. So
Have studied your and others video
* Can more than 2 elite ti2 be wirelessly networked? I’ve heard no
Also
* will NMEA 2k work for waypoints etc ? Again there has been different answers.
I will have 2 ti2 9” on the bow & a 12” at the console. Without Ethernet how can I make all 3 talk? I know the one at the bow has the trolling mtr transducer. But what if I want all 3 to pickup etc etc
You will not be able to wirelessly connect more than two Elite ti2 units.
NMEA2000 will transfer newly created waypoints on the go, you will not be able to share saved waypoints. You would need an Ethernet connection between units to achieve that, and the Elite ti2 series does not have that feature.
You can indeed use the trolling motor from every units on the boat via N2K, but you will not be able to share sonar with all 3 units.
Dear Metthew! I would like to request information about ELITE 12 Ti2 and HDS 12 Live. The brochure shows that the display resolution is 1280x800 for both devices, but the Elit has TFT while the HDS has an IPS panel. Is the image of the two devices the same with an active imaging transmitter? In addition to the benefits of the IPS panel, is the displayed image different for the Elite 12 Ti2? For me, only the displayed image is important and in this respect I want to choose between the two devices. Thanks to András from Hungary (Europe)
How do I make the fish more visible and how do I enlarge them.
Can I install the transducer to my MinnKota Terrova trolling motor? I am getting mixed messages about adding it to my trolling motor from your tech support folks. I really want to be able to use it when moving but I can use my helm unit/transducer for that. I’d love to use the bow mounted ti2 while moving but if my only option is to mount it to my trolling motor I guess I will have to live with it. Thanks
You could install the transducer on your trolling motor, although you should check what adapter you need to mount the transducer you have in mind. As per controlling the Minn Kota from the Elite Ti2 is a no go.
@@lowrance Your tech support folks said there is no bracket to attach the transducer to the Terrova. If you know what bracket would work kindly pass it along to me. Thanks for your reply
I purchased a elite 12 ti2 in November ‘22 and I’ve had nothing but trouble, it’s “ghost tapping “ to the point that’s it’s unusable
I’ve contacted Lowrance support and it took 3 phone calls and 2 hours to convince someone it’s still under warranty
Who can help me with this?
Please send us a message via FB with your contact details and your unit's serial number. We'll take care of it from there.
What an Awesome vid great job buddy thanks
I am looking to but a elite TI2 9 inch. Does it come with the 3 way transducer to get side image or they only come with a di and ds? Thanks
I just pick up a 9” Ti2 from Bass pro on sale for $599 and it has the transducer for side scan.
There are bundles with 3 in 1 active imaging transducer which enable downscan, sidescan and CHIRP modes
Hi there quick question I have a ti2 12” Lowrance when i turn on my unit I get a warning that my navionic is enable what to I do thanks
Take the chart card out of your unit before switching it on.
@@lowrance hi there I did it this morning but still show up warning
Hi there today I got
Warring Navionics Rock Filtering is enabled
Please send us a message via FB with the screenshot of the error message, your unit's serial number and your contact details.
@@lowrance I just sent the pictures there thanks 🙏
Does this unit read/recognise the various forms of micro SD cards that are available these days? eg. SDHC, SDXC? the original micro SD cards are no longer in retail circulation
Yes, to 32gb
I had HDS12 side imaging when the boat is moving the sketch line in midle show surface water how deep the line too large how to adjust it into sketch line
Thanks
What adapter do I need for the lowrance elite 9ti and the minn Kota terrova?? And extra cable?? Thanks much!
The Minn Kota is not compatible with Lowrance units.
@@lowrance 😡
You guys really need to work that out between the 2! You just lost a customer because of it.
If controlling the motor is what you are after, then we can't really help you.
Great video, Thank you
Can you run 2 units off of one transducer for sidescan?
I think if you communicate two Elite Ti2s. You have to chose which is the active, and which is the slave. This is from what I read, because I can't afford two Ti2's at this time.
Mightiflier Do you mean two TI2's on a NMEA 2000 Network sharing one transducer? I'm confused. I'm wanting to install two TI2's on my console but use one 3in1 Transducer. Thanks
@@erniesanders3724 Over my head, brother, I think they work off their own WIFI. I might buy an extra Elite Ti2 in the near future to mount up front since I do a lot of trolling motor work up front. That way I can use the WIFI from the rear mounted Ti2 to connect with the front Ti2 so I can view what is under the rear mounted 3-in-1 transducer. I've just seen this scenario mentioned in a couple of Lowrance videos, and have successfully hooked up a Kindle with my current Ti2 in my garage. However, I don't think the two Ti2s could be primary at the same time. But honestly, I am pretty new to many of the features of the Ti2. I will probably buy a transducer to attach to my "up front" trolling motor, but use both with one being the primary and the other the slave, as I mentioned before. I believe they share waypoints and trails. Hopefully, someone will read this and correct me if I am wrong.
@@Mightiflier no, only 2d sonar, waypoints, backlight illum will sync---hds will share sidescan/downscan thru ethernet
@@erniesanders3724 cannot share downscan/sidescan with TI2
My unit doesn’t recognize my transducer, how do I fix that.... my charts and down scan work, however my side scan only shows the line in the middle where the boat is.... I’m losing my mind!
Here's troubleshooting for selecting your transducer: www.lowrance.com/help-and-support/?guideTitle=Transducer-Selection-Guide&guideId=003-997 or if you need further assistance, please reach out to us on Facebook PM or just click "Contact Us" on our website. Thanks.
How to you change clock to correct time ?
Go to System > Time and enter your correct time.
How do I turn off the fish symbol on my elite Ti2
On the Sonar page, press the option View > Fish ID > OFF
Hello, I just got the Lowrance elite Ti2. my question is. How do I get the sound for the fish when it comes under my sono my last lowrance hook seven I was able to have the sound whenever I fish came under the radar.
sean rice 41:45
How come my charts don't show depths?
Do you have the link for the transducer install troubleshooting video?
How do I mount an elite transducer to a trolling motor
The Elite unit can use different transducers. Which one are you interested in? Many videos on the subject.
Do you know if I can download social maps onto this from insight genesis
how do i connect my ipad to my elite ti2?
how do you get trolling motor inagreated
If your trolling motor is capable of NMEA2000 then you will only need an interface. Check with your trolling motor manufacturer.
If my transducer is hooked to elite unit at console and I have xi5 at the bow with nmea hooked to the front elite monitor hooked up wirelessly to unit at console can I control the xi5 from both units
No, need nema console to bow
The Elite ti2 can only be connected wirelessly with another Elite ti2 and they can only share sonar, charts and waypoints.
If they are all hooked onto the same N2K then yes, you'll be able to control it.
@@lowrance thank you
What about radar
Thank you Good video I was looking at getting to of them the 9 ti2 I was wondering when u set the home unit on dash and the other on bow well the home picks up the trans from the back of boat and the front is set for trolling motor I don't understand that or does both read from back or how do u set the front to read from trolling motors trans ? Thank u so much for ur time .
trolling mtr ducer is connected direct to bow ti2, if you want to to 'see' 2d sonar from helm ti2 you have to go into settings>data sources> sonar
Why can't I see my screen in the sunlight
Can some help me get my Ti2 to connect to my motorguide xi5 and what transducer to select
You will need the Motorguide gateway kit. What transducer do you have? Please send us a PM and we'll help you
@@lowrance I already have the gateway kit connected to the xi5
How do you make your own mapping chart, WITHOUT having to upload it on internet? WHITOUT using Genesis Live that never stop mapping and move the contourlines around the boat.
Trying to install ad card for maps, need help
Can it wirelessly connect to a Hook 5 HDI?
No, the Hook series does not have wireless connectivity
Tiresmoke7 so that means I need a second Ti2 on the bow, huh? I’m good with that but gots questions about the wife though.😜😎😂
The quick release system sucks big balls mine falls down when running on smooth or choppy water the graph pivots down it want tighten no more to keep the screen up facing me but I have found a flush mount bracket not sold by lowrance that will mount to my dash an mount the unit at a angle an stationary no dam falling down an moving an bouncing around when running
What bracket you buy?
You don't need a bracket, just remove the caps on the 4 corners and you'll see a small hole in each one. Using the template that came with the unit or do your own, make your cut, run some bolts through the holes and whaallaa.
How do you put the MPH speed on the screens....
Menu / edit overlay / add / sog
Translet Romania plis
Dude, your good, great expertise
how to get rid of digatil chart
What exactly do you mean with getting rid of digital chat?
@@lowrance your video helped the chart was laid out in squares not real contours Ipowered off held +. and - then power got lake back the.
Can I wi-fi my elite ti7 to a another brand such as hummingbird
no
How do I see my lure presentation and how the fish see it
We'll an HDS live talk to an elite TI2 side-by-side
The will have some communication if you connect them via NMEA2000. Bear in mind you will not be able to share sonar nor chart, as you would need ethernet for this to work.
can ti2 connect to radar?
You cannot connect a radar on the Elite ti2 but you can now on the new Elite FS via Ethernet.
shoot, I need XD
Whoa! Just went to Amazon and the reviews of this model are terrible. The fact that you can create charts is fine but you apparently cannot upload charts created by other users in the Lowrance Community. Every single review on the first page were negative saying (Do Not Purchase) etc.
This sux because I was just about to click Buy Now but I decided to look around some more. I’ve been off the water for the past 10+ years and fishfinders are almost alien to me now as they have changed so much. The thing that drew me to Lowrance was thst I was trying to find a Fishfinder that can BT connect with my new Mercury Vessel View so I don’t have to use my iPhone or iPad and Lowrance popped up but looks like it may take some kind of extra module or something. I’m so comfy? Lol 😂
You will need to create an account with C-Map genesis in order to download other's sonar logs. The Elite ti2 series is out of production now, but it is still one of the most used units and, despite the reviews, is one of the most popular and loved ones.
Talk about this and don't explain what a hook does If I wanted to know how that worked I would have looked up hook
After two years using my Lowrance, I can say " I don't recommend this brand".
1. Worst customer service, they receive calls only from 9am to 4pm EST.
2. It works properly one of every 10 times.
3. Cursor acts like crazy and show you destinations with out avoiding obstacles going to one point to another (never navigate with this unit at night, you will end in the beach or over a sand bar or over rocks).
We're sorry to hear you feel this way. Please reach out to us so we can see how to help with the issues. www.lowrance.com/contact-us/ You can also send us a private message on Facebook. We will be happy to troubleshoot and check what options are available. Thank you.
Cox x
Did anybody else try and count how many times the dude says “Umm” ?
Uhmmm, well, we hope people were interested in the content of the video, more so than the way someone talks... uhmmmm
Nice tutorial but this guy is nervous as hell.
Lol I picked up on that.
Biggest POS made!!!! Rip off
Lasted 1 month
Please send us a message via FB we'll be happy to help you with the issue.
So damn fast this is totally useless.
How do you change the setting for the mapping. I accidentally chose coastal instead of inland and I have no details of any inland water at all.
Thanks
Matt
Hi there would the elite 12” Ti 2 3 in 1 would network with my 9” HDS active target carbon
You can network them via NMEA2000 but that will not give you the chance to share sonar nor maps between the two units. You will need an ethernet connection for that, and the Elite Ti2 does not have any ethernet port.