1992 4runner 3.0 head gasket job,do's and dont's
ฝัง
- เผยแพร่เมื่อ 24 เม.ย. 2020
- I forgot to mention to replace the head bolts with brand new ones and use all the gaskets and o rings that comes with the head gasket set. I didn't have to use the valve guide seals because the engine didn't smoke or burn oil on the cold start. you should always keep an eye on your gauges especially the temperature gauge when operating your vehicle. Thanks for watching and stay Safe
I'm pretty sure these 3vze engines are non interference. My belt broke and never hurt any valves.
You are right I just googled it. That's a feeling of comfort. I'm glad yours was okay. Thanks for your comment.
Definitely non interference
There interference engines and yes won't hurt the valves unless you get it out of time.
@@chadenglish6980 Chad not being rude, but theyre non interference. My timing belt broke and I didn't have one bent valve, or broke pistons.
Correct
I deleted all the egr system and all the unessary vacuum lines when I did my head gasket also I took a burr bit opened up the Back of the manifold where they come together at number 6 it really breathes well
Yes, way too many vacuum lines. Thanks for watching 👍
Mine just went. This car is older than me😂. I found out that it survived 282k miles on the original head gasket.
I guess it was time for the head gasket to go. Good luck,🔧👍
Doing well and thank you for asking! Just got back from a run from Death Valley and realized I got a blown head gasket. Well, at least she got me home! Got 32 yrs out of it and will be replacing it soon.
Sorry to hear that. If you ever have any questions feel free to leave them in the comments. Good luck
Great Video! 👍🏻
Thank you I'm glad you enjoyed it.
Was told mine was done in 1998 but it's bad again at 155,000 Miles so the dealership said bring it in Friday the 25th and they will tell what they have planned then. I know it should not have went bad that fast again. I'm only the 3rd owner and the original owner bought it new off the dealership in 1993 been in the same state ever since. Beautiful truck and hoping the dealership does the Headgasket again
I also have a 1994 I bought in 1999 and the previous owner had the head gaskets done right when it was called back. The truck has 356,000 now and it's still okay. The one in this video was not taking care of at all. Thanks for your comment and Thanks for watching!!!
Be sure and change the nox sensor and the wiring harness, just below the plenum intake.
Thanks for your input and Thanks for watching 👍
Disculpa configuración de las maneras de la 4x4 de una runner 92
I just did my head gasket. I had a cracked head on the driver side. I pulled a code 71 after putting it back together, fixed my egr hoses and then had a code 25&26. I think I have a bad injector but also read it could be the o2 sensor
Does the engine have a miss. If so you should fix that first than clear the codes and see if the light comes back on. I hope this helps you!
@@gravelyman I don't think so. It's stuttering when I'm maintaining speed. Especially when driving 55 mph. This is the first time I've ever worked on a car and it's been such a headache
Check all the basics first. Make sure the timing belt is on right and so on
@@gravelyman we did the timing belt correctly. Had it a TDC and all our marks went on perfectly. I think one of my fuel injectors is faulty. Isn't seating properly and it's got a slight leak
@@johnb1016 That's very possible I hope you can figure it out. The best of luck to you!!!
So when reassembling. #1 piston top dead center an cam pulleys should land straight up w the arrows ? Is that correct?
Yes. Number 1 is on the passenger side with the piston all the way up. Thanks for watching 👍
Any idea how much parts would be all together?
From what I remember it was between 5 and $600 dollars. I hope this helps you and Thanks for watching!
This 1992 3.0 liter engine is not an interference engine .
Some of the commenters said it awhile ago. Thank you for your input and Thanks for watching!!!
Pretty sure this is a non intference engine
Yes your right someone else said it in the comments. Thanks for your input and watching!!!
@@gravelyman yeah, i just did a valve job on my 93 4runner. You had me worried for a second.
@@danielcaton716 I was worried about that for 25 years with my 94 so we don't have to worry anymore!!!
The 3.0 is NOT a interference engine..
I always thought it was. Some of the commenters said it's not. Thanks for your input and Thanks for watching!!!
...yep...non....