Applying Vinyl into a Deep Channel
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- Many commercial wraps include difficult applications over and around deep channels. This video shows the ideal technique for installing vinyl into channels. Using heat on the proper areas of the graphic and stretching at the right stage will ensure that your graphic will stay down. For more videos in this series, visit wrapitright.com.
![ออกพรรษาน้ำตาหล่น - แอน อรดี [OFFICIAL MV]](http://i.ytimg.com/vi/PFZtOcY9ONA/mqdefault.jpg)
Instead of a straw (go greener) you also can use of liner you removed from the vinyl you installing. Just roll it tight to the tube and tuck it in. It won't stick to vinyl that much as a plastic straw. You are welcome :)
EXCELENTE EXPLICAÇÃO!!!!!!!!!!!! PARABÉNS PELA HONESTIDADE EM MOSTRAR TÃO VALIOSA DICA!!!!!!!!!!!!!! MUITO OBRIGADO!!!!!!!!!!!!!!! PARABÉNS!!!!!!!!!!!!!!
LEO- RIO DE JANEIRO- BRASIL
Great video
I have a custom piece that is 24" round and concaved any tips
Makes sense! Thank you!
May i know what is the temperature should i apply on the mentioned area?
Thank you watching our video +KAiLuN TaN, the temperature should not exceed 30C. If you have any further questions please contact us anytime.
NICE!!
Thank you. I used this method and had great luck in the dips but I continued getting bubbles and wrinkles in the flat are that I heated. Is there a way to avoid that?
You never got an answer or help, that sucks! I think bubbles are always going to be there no matter what you do or what product you use. Sometimes they are worse than others it seems. I know that using heat gun after finishing a section to help seal the edges good often causes bubbles to suddenly show up near the heated edges. I am new to this Wrap game and have only wrapped my SUV at this point.
Use air release vinyl to avoid any bubbles
That ant deep, try doing camaro doors 😂 2000
why do you need to heat it if your laying cold vinyl anyways
Stretch.......... you cant stretch cold vinyl ;-)
Thank you
The only people who need to stretch it are those who don't know what they are doing. Fact! Heat is only needed if you have creases, defects from handling the vinyl and for post heating the edges so they stick real good. You never need heat just to lay the vinyl down and get it into position. Never!
@@JQUICK21 so please explain to me how you wrap in a recess? Without using heat?
@@jakeosborne3932 Aye, don't heat vinyl even though every manufacturer/applier recommends to do so, lmao
i tried to wrap my 3" cowl hood and failed miserably because i stretched it to much and it ripped 100$ 3m carbon dnoc in the trash!
your not the only one! i have done it to! :)
You shouldn't need to stretch the vinyl when doing the hood of a car apart from on the edges