ฝัง
- เผยแพร่เมื่อ 17 พ.ค. 2024
- How to download, compile and upload the ESP8266 Deauther firmware onto a D1 mini dev board. Also how to fix common issues and install Deauther V3.
Blog post including instructions: blog.spacehuhn.com/install-de...
Wiki Tutorial: github.com/SpacehuhnTech/esp8...
Arduino IDE: www.arduino.cc/en/software/
Boards Manager URL: raw.githubusercontent.com/Spa...
Deauther V2: github.com/spacehuhntech/esp8...
Deauther V3: github.com/spacehuhntech/esp8...
Deauther Wiki: github.com/SpacehuhnTech/esp8...
D1 Mini Board (affiliate links):
s.click.aliexpress.com/e/_AZIDXW
(US) amzn.to/3jPAlui
(DE) amzn.to/3dEo5Jm
00:00 Intro
00:25 Lookup Project Instructions
02:41 Install Arduino IDE
03:29 Download Project
06:20 Add Board Manager URL
07:06 Install Boards
07:38 Select Board & Settings
10:11 Connect Board & Upload Code
13:10 Install Deauther V3
15:38 Outro
📡 ESP8266 Deauther: github.com/SpacehuhnTech/esp8...
🌍 Website: spacehuhn.com/
📝 Blog: blog.spacehuhn.com/
❤️ Donations: ko-fi.com/spacehuhn
🐙 Github: github.com/SpacehuhnTech - วิทยาศาสตร์และเทคโนโลยี
![เกิดใหม่ทั้งทีก็เป็นสไลม์ไปซะแล้ว ซีซั่น 3 - ตอนที่ 55 [ซับไทย]](http://i.ytimg.com/vi/JfRpviYiQPY/mqdefault.jpg)
Amazing and concise tutorial! Thank you so much from New Zealand
Thank you! I was getting the errors explained in this video. Thank you helping me! Keep it like this!
Super complex setup if you try it alone, without watching this clip. Watch it, learn and listen. Super!!!!
Ty, simple and easy to follow 😀
Clear, concise & to the point. Very well done & thanks.
Helped a lot, best in youtube, thanks!
Are there any concerns following this guide with ESP8266 vs ESP8266d?
Thx so much for this very comprehensive and understandable tutorial. All runs fine on D1 mini. 🙂
Hey i really like this project my friend showed it to me and i wanted to try i have already had a ESP32-wroom but it was not working on it i have tried to sellect ESP8266 and nodeMCU on the board manager but it failed uploading could you give me help or add the ESP32 and ESP32-wroom in to the board managger. Thanks and keep it going.
Sir im using node mcu, when im using just node mcu its fine but when i add the spi display its always restarting
Is this some kind of reupload? :o Cuz i like did ur tut from github one or two years ago😂✌🏽
can nrf24l01 module be added for more range? please answer me 🙏
It is possible to add some new graphics, bitmaps, to user UI? I've tried to personalize just a bit UI in menus, and I watched the library used for ssd1306. But I can't afford to add more than just ascii emojis. Even, I can't afford to add just a new strig character, just literally just one :(
is it possible to put deauther and evil twin on one board..or i will need separate boards
Hello, I tried to reflash my dauther (v7) but the screen is no longer displaying information, can you please tell me which firmware is correct in the Arduino IDE? Thanks.
My dude you’re the best
sir waiting for new version of deauther❤😊
thats neat :) Thanks !
can you make a vdo explain how the codes work and why it have many files why is it difference from other
this work with egeloo uno r3 board?
Hey Stefan, wo kann ich bei der V3 Version des deauthers eigentlich den Wifi Namen umändern.
Hey Spacehuhn, where in the github repo can i find the script for the deauthentication code as i want to use it for a similar project?
In case you’re still looking for it. We made a blog post about the whole topic:
blog.spacehuhn.com/wifi-deauthentication-frame/
@@spacehuhn thank you
does this deauth desktop laptop too?
excellent !
Young and smart
The original the one and only.
The deauther board is not available
What is the solution
Will V3 get web and display support?
Hello Sir, how to expand d coverage range?Ty
there is no 'deauther esp8266 boards by spacehuhn technologies' in Arduino board manager
I have same problem.
Will this work on the maker focus esp 8266 wifi deauther module with case? Not the watch, the green one with the white case
Hi, I was wondering if you have a guide on how to make this a bad usb and stuff. 🙂
i am facing an error with the code can you help me. And i am attaching the error also
esp8266_deauther:10:12: fatal error: user_interface.h: No such file or directory
#include "user_interface.h"
Same did u find any solution
@@halalboi_1016I think you need to download the library
@@emilka9537 same bro did u find the solution
spacehuhn You think RTL8720 Arduino will work with 5ghz?
Does RTL8720 BW16 can use the firmware of ESP2866 from 2.4 ghz to 5 ghz??
is it possible to use e Pater HAT instead of OLED? I understand that e paper has much slower refresh rate, but is it possible? (my is Waveshare, 2.7inch ePaper HAT, 264x176, SPI), sorry if its stupid idea, I am just a beginner
Hi 👋 It’s possible to use rtlduino rtl8720dn like 2.4-5ghz deauther/jammer?
What version wmos d1 mini boards you use in that video?
can u insert the fitur with mode station wifi to?
there isn't any deauther board :(
Do you have a similar project but for bluetooth? i.e. a bluetooth speaker de-auther?
still no pwnd, and i don't understand why....
Can I make a deauther with a normal lcd screen as a hub with Alexa capability just by combining 3 8266 chips. Also having the third chip be a wifi extender. All managed by the hub screen
I've seen projects just curious if they would conflict eachother if I added 2 to the same board.
Hey, is there a way I can put this on a LoRa v3 esp32?
can i attack some specific SSID? and how do i do that? thanks!
This is a great tutorial but I was hoping you would go into more detail about the button setup. I can't get the buttons working on my build. I've searched and found several others having the same issue.
I also have the same problem, I checked everything, tried to change the code somehow, but it did not give any results, maybe you have already solved this problem?
When I try to compile the code the following error is shown: " esptool.FatalError: Invalid head of packet (0x46)
". I'm using a esp8266 module. Someone can help me with it?
where did you learn to code nodemcu bro i want to study it too
the deauth stops after 15 min , anyway to remove that setting?
Sir i need help what about for android how do we do that on android
How would I go about changing the pins used for the display
change the code lol
Why after flashing i have boot mode rst 4 boot mode 3 6 in serial monitor
I wanted to ask why it could be that everything works except the 3 buttons. I checked super often whether everything is wired correctly and I can't find any errors. What could be the problem.
Many people have this problem, and so do I.😢
c est surement a cause du firmware que vous utilisez essayer de flashé une autre version ou la broche de la masse qui controle les bouton a un problème j espere vous avoir aidez@@emilka9537
Incroyable.
cara menghidupkan nodemcu dengan menggunakan powerbank bangaimana ya bang, nodemcu v3 kalau dicolok powerbank hanya sebentar saja nyala lalu mati lagi, mohon bang arahannya agar nodemcu bisa pakai powerbank
Esp8266mod?
I really need help with programming my deauther watch I tried to update it but i did something wrong now the screen is off if I turn on the watch help meeeeee😭
Hi sir this is a very nice project, sir I want to use ssd1309 spi OLED with node mcu sir, so please if you can tell me how to change settings for the display please sir
it says
fatal error: EEPROMHelper.h: No such file or directory
please help. it says Compilation error: fork/exec
does it work for hiletgo?
Then how do you open the list of exploits?
Hi, what is the password for the wifi network??
deauther
@@spacehuhn Thanks
does this work with the ESP32?
no
the esp 32 can't carry out deauthentication attacks
so, this can make nodemcu to "fun mode" 🤣
link to cable?
my screen is black i can't use the watch i think i'll send it back
Wie ändere ich Beacon Texte
an idea I have is you can make an android phone a deauther.
you would do this by having the phones wifi chip be the hardware and you could make an apk for the software and control it
Hello Spacehuhn! I just want to ask if there's a project for "5G WIFI DEAUTHER" using the BW16 RTL8720DN, the same as the ESP 8266 Node MCU. I saw a video on TH-cam of the BW16 RTL 8720DN equipped with 2.4 + 5G dual band WiFi. Same size of the ESP 8266 Node MCU. I think you can make a 5G WiFi Deauther on it. I hope you will review that chip. I can't attach the pictures and PDF regarding that chip to your contact support page. Thanks. I think it is POSSIBLE!
Here's the TH-cam link for BW16 RTL8720DN 5G Chip: th-cam.com/video/T10xCiM_4cw/w-d-xo.htmlsi=1tWRQJYThDvyTcmj
I did what u said now all my stuff wont turn back on
Button not working
i already have custom software to upload the Deauther to Wemos :)
easy pC
How to change the Hotspot Name and Password?
In the settings on the website, or in the code (through the website it is much easier)
also i made a long range Deauther using Wemos
How to long range using d1 mini?
Hope that the next esp8266 deauther can be controlled using telegram.
where the fuck is a guide on how to acutally use
it