Wireless BadUSB Tutorial | esp8266
ฝัง
- เผยแพร่เมื่อ 25 เม.ย. 2017
- MalDuino! Learn More: malduino.com
Previous video: • BadUSB With WiFi | Fir...
Link to buy simple version: seytonic.com/2017/02/03/nodemc...
Link to buy more complex version: seytonic.com/2017/03/28/links-...
wifiduck github: github.com/spacehuhn/wifi_ducky
espflasher: github.com/nodemcu/nodemcu-fl...
upload over arduino: gist.github.com/spacehuhn/b2b...
Spacehuhn twitter: / spacehuhn
If you have any questions/queries regarding this video, please ask them in my subreddit linked below.
----------------------------------------------------------------------------------------------
Check out my site: www.seytonic.com
My Subreddit: / seytopia
Follow me on twitter: / seytonic - วิทยาศาสตร์และเทคโนโลยี
❗Check out my new store! Your one stop Hacker Hardware Shop! ==> maltronics.com
i can use a node mcu only
"Here is a tutorial on how to make something that's probably better than MalDuino."
**3 seconds later**
"Also, don't forget to buy a MalDuino."
good guy Seytonic
supickumaterinu 🤣
Proud Brony Entetainment True. He's an awesome guy. I'm saving for a MalDuino as well.
Markus True as well. But let's be honest, most people here are going to be using it for trolling.
Elixir lol buy ELIX
Thank you Seytonic, for actually going in depth and showing the downloading etc. Not many youtubers do that, they just say "flash it" and move on.
Your tuts are are bloody brillant. Recently got interested to this because you and spacehuhn are just that good.bless u
Hey, what is the wiring setup for the NodeMCU to pro micro? I searched the subreddit for a post on this video and there is no subreddit post for this Video.
As always a nice and clear learning video...Thanks!
Hey Seytonic,
When I try and use the Arduino Pro micro with my Mac it gives me a
avrdude programmer is not responding what should I do?
@Seytonic For the simple version, is it ok if instead of using a d1 mini i use a nodeMCU?
Is the setup the same for the digi spark?
I didn't understand much the cabling, can you make a document on your web page? @Seytonic
in one of your previous video tutorials did you mention this being possible with just the wemos d1 mini?....ive tried reading all the comments to answer my question but there are to many to go through
So I watched the video, and I had a NodeMCU and an arduino Leonardo. I flashed the NodeMCU and everything worked. I got a new network that I could connect to. I connected to it and everything looked as shown in the video. Then I installed the code on my arduino. After wireing everything together, the network stopped to appear after powering up the arduino or NodeMCU. I connected the TX0 to RX and the RX1 to TX. I connected the GND to G and I connected RAW to VIN. After powering it up, everything lights up, so I guess it should be working, but it isn't. What should I do?
So for method one is the pro micro and the d1 mini supposed to be soldered together and then plugged into the computer to work?
thanks! nice and simple explanation
Hello! From where can I buy that micro USB to USB A adapter you shown in the video?
can i just solder on two wires to GND on the arduino and connect it to GND on the regulator and the second wire to the other pins on the esp?
Thank you for the great video
I have a doubt, you used Leonardo board for pro micro in 2016's video and in this you recommend using genuino micro board. Which one should I use for 5v 16Mhz pro micro (ATmega32U4)? Or can I use both? Hoping to hear from you, I don't want to brick my device. Thanks a bunch!
If my memory serves me well, you’ll need to use a 3.3v pro micro to match the esp’s voltage
Hi, i have a question. Is it necessary to buy ESP-12E or i can buy ESP-12F?
can I use a normal (no "mods") NodeMCU esp8266 ?
Can you make a tutorial of this but instead of using wemos d1 mini and pro mini, use nodemcu and if possible a digispark attiny85. Thank you
My question is, where you bought thoose metal USB adaptors? I searched Ebay for hours and all i found is bulky plastic ones
you can buy a 5 pack on amazon for $5. www.amazon.com/gp/product/B015GZOHKW/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
where can i buy the adaptater at 0:44 please ? Those that I find on the internet are overpriced help
Can you please make a twin duck?
Aren't there any problems with the hardware signature of the "emulated keyboard"? like, doesn't windows show a warning or even error usually to block the keyboard?
It reads as a HID so as far as windows can tell it is a normal keyboard.
oh wow really? I would've thought that they'd use some kind of hardware signature or sth to prove, that it's not malicious. Cheap Arduino clones for example won't work via USB because you need to install unsigned windows drivers. Thought they'd have some mechanisms for keyboards as well... good for us they didn't :D
If you are referring to the clone Arduinos like the Nanos, Then your statement doesn't quite line up. The Nano and UNO use an ATMEGA 328p which does not implement hardware USB stack, so to communicate with it, they use a USB->SERIAL chip. The cheap clones use the CH340 typically. Also, you don't need to install 3rd party Drivers for the CH340 anymore from Win8 and up now it's plug-and-play. USB->SERIAL chips can't talk 'HID' as they only do Virtual COM. The Arduino used here, like the Leonardo, use the ATMEGA32U4 chip, which DOES implement a hardware USB stack, making a serial converter chip unneeded. A benefit of the chip being able to do hardware USB, means it can become whatever type of USB device it wants, such as HID.
Now, HIDs all have a VID&PID, which simply tells the PC the manufacture and Product ID so that it correctly loads the right drivers. A person CAN blacklist VIDs&PIDs to prevent this device from being used, but this is easily circumvented by telling the software to say to the host that its actually one of the millions of other Keyboards/Mice/whatever, and not the one blacklisted.
Hope that clears things up...
Yeah ok thank you. I just thought that there was a security mechanism for keyboards and so on too. So that you cannot say "Hey, im the logitech xyz".
Anyways, cool / frightening that it's so easy...
Timo If that's scary for you, consider how easy it would be for a router manufacturer to eavesdrop on users en masse. Or, imagine the IoT world, where you intentionally buy and install little always-on devices with sensors and wifi around your house, all built by various Chinese companies you know little about.
Are conections the same as on 3:37 if i use esp8266 instead of mcu combined with pro micro
This is awesome and keep it up
anyway to make this autorun on computers that connect to this? Like pc connects to this via WiFi and then BOOM runs the script?
Can someone explain what device i should flash and what device needs to get code uploaded?
Im talking about the 2nd version
'One of these adapters', 'Links in the descritions'. It's not there sadly. What do you call one of those super tiny usb to micro usb adapters? I only find the large ones either with a cable or a lot of plastic in between.
HEY! Just a question I know this is not the video but with a Bad USB can you use it with a Phone (IPhone) and use it as a login key? A SUPER long password can be put on the USB and you just plug it up to type it in.
I am pretty sure you can do that but you would need a different sofware to convert from Ducky script to iphone tap locations/keystrokes. You may have to wirte your own code or find some on the internet
WIFI DUCK doesnt come up in wifi setting, connected RAW to VIN, any problem there or should i just flash in again to the 1mb bin file?
Unfortunately it is pretty usless with using the US-layout on your Keyboard
im using the geman Keyboard Layout and its not possible the writte " \ "
With my digispark a have not problems its always writtes the writtes letters / symbols
Tomisboy You can change the keyboard library files in Arduino to be mapped to Germany :)
Tomisboy github.com/digistump/DigisparkArduinoIntegration/blob/master/libraries/DigisparkKeyboard/DigiKeyboard.h
i have one big problem, i cant upload the 1mb or the 4 mb with that program. What to do?
What are we plugging to the computer on around 6:40 when he flashed it?
would a teensyduino work or does it have to be a micro
How do I use a nodeMCU for the simple version if there's no 5v pin
Will it work with digispark instead of Arduino micro
Would Arduino Pro-Mini be ok instead of Arduino Pro-Micro? Thank you.
For the sleeker version would this www.jaycar.com.au/voltage-regulator-lm2936-3-3/p/ZV1650 would this one work i forgot to order the regulator please help thanks in advance
Can i use a regular arduino instead of the pro micro
Can u reply where can i buy the adapter ie microusb male to male usb
were did you buy your male to male adapter from
Can you make an arduino keylogger using ps2 keyboard intercepts and key emulation? I found some libraries for it but I don't know how to get started.
can you give links to the libraries?
will this project also work if I use a arduino nano?
can i use digispark with node mcu??? then what the connections below
HEY! what good invention thank you for everything but I have a problem is that I'm using a nodemcu plate but when I'm loading the scketch I get this error, I do not know what but the board is selected as nodemcu .... I would appreciate the help :( ....
Arduino: 1.8.5 (Windows 10), Card: "NodeMCU 0.9 (ESP-12 Module), 80 MHz, 4M (1M SPIFFS), v2 Lower Memory, Serial, None, Only Sketch, 115200"
In file included from C: \ Users \ JuanDiaz \ Documents \ Arduino \ Ruberr_Ducky_with_Wifi \ Ruberr_Ducky_with_Wifi.ino: 1: 0:
C: \ Program Files (x86) \ Arduino \ libraries \ Keyboard \ src / Keyboard.h: 25: 17: fatal error: HID.h: No such file or directory
#include "HID.h"
^
compilation terminated.
exit status 1
Error compiling for the NodeMCU 0.9 card (ESP-12 Module).
In file included from C: \ Users \ JuanDiaz \ Documents \ Arduino \ Ruberr_Ducky_with_Wifi \ Ruberr_Ducky_with_Wifi.ino: 1: 0:
C: \ Program Files (x86) \ Arduino \ libraries \ Keyboard \ src / Keyboard.h: 25: 17: fatal error: HID.h: No such file or directory
#include "HID.h"
^
compilation terminated.
exit status 1
Error compiling for the NodeMCU 0.9 card (ESP-12 Module).
This report could have more information with
"Show detailed output during compilation"
option enabled in File -> Preferences.
thats amazing!!!
stupid question: Can use *just* my nodemcu Lua esp8266 board for this whole tutorial? instead of buying the esp8266 WiFi module?
answered my own question: *you need to use the pro micro Arduino so it can act as the keyboard to injector code*
The flashing wont work pls help!
Wich port do i need to put in by the nodemcu flasher???!
Pretty awesome, question can it work on a regular nano adruino ?
No, it can work on arduinos with keyboard.h library like leonardo and micro
could administrative tasks and automation is possible through this?
how can you change the max character limit above 1024?
how to do it with the esp8266 from the wifi jammer video?
Hey, I have a Arduino pro mini and NodeMCU, can I make it work?
Sorry buddy. You can't. You could spend a couple of bucks to get an Arduino Pro Micro.
I'm doing exactly the same as you Seytonic, with D1 mini and Pro Micro, with the same settings. But I can't get anything sent to the computer... any idea why ?
I just created this as well, and nothing appears to be sent to the computer.
I checked Device Manager, and I get USB Serial Device (COM4)
So it's not appearing as a keyboard.
Also I connected the computer to the Arduino and not to the Di Mini
PLEASE show us how to make a Pi Zero Bash bunny!
I'm trying to make one but I can't make it appear as a usb flash drive!
nodemcu lua esp 8266 no 5v, what should we do?
does it make more sense to buy a arduino pro micro 3.3v instead a 5.0 v and a 3.3v converter?
yup
Could you post a picture of the wiring of the pro micro with nodemcu. The pin layout is alot different from the D1 mini. there is for example no 5v pin if im correct.
No the wiring is the same, just wire it without a diagram, there is a table showing what needs to be connected to what on the github page
Vin = 5v
Thx.
Nice job!
Is there a opportunity to use a nodemcu flasher on a mac!!!!????
When I want to upload it to my pro micro it disconnects from my pc and the leds from pro micro would flash for ever if I wouldnt unplug it... Idk why but I cant upload things to it.. Does anyone have an idea what the reason is and how to fix it ?
Is there a way to change the Keyboard Layout from american to German?
Anyone can tell me the name of the USB adapter for aruino pro micro??? And maybe the link where i can buy it?? ty.
Where did you get that adaptor from?
I have a question does the Node MCU still have it's originally functionality
No.
Is it possible to make a wifi twinduck?
oh you bad boy, using the wurst hack client! tztztz :D
Hey Seytonic,
Can I program malduino for Android
Will this work with the ESP8266 NODE MCU chip with the built in arduino, etc.
Sadly no, as the ESP8266 doesn't have HID capabilities. If the seller lists it as having HID, or if the chips name is ATMEGA32U4, you MIGHT have a chance.
I have a error:
'Kejboard' not found. does your sketch include the line '#include '?
I have the line in the first line
Make sure to select the correct board: Tools > Board
Žiga Kralj iv got the same problem
Seytonic how do I do that
is there a way to use just nodeMCU without arduino things?
Arctic Dragon no because you need the Pro micro to act as a keyboard
Possible: include the experimental soft usb stack (CNLohr) on the esp + adapt arduino code to fit.
AltMarc Please explain this further
AltMarc can you show an example please?
Because the ESP8266 can't transfer any data via serial.
please make a tutorial with nodemcu esp8266 for a badusb
Finally my esp8266 has arrived but aparently I cant connect to 192.168.4.1 whilest in the WiFi Duck Network. Any Solution ideas? I've built the last setup...
what cable do you use?
The 2nd version doesnt need a esp8266 right?
why dont u make a new version of malduino with the wifi component?
;)
@@Seytonic your videos are so... awesome...it really helped me a lot..
Ok thn...i have a request, could you pls say how to add sd card thing to wifi duck..so,it can also act as a usb drive ..😉...
Could you pls ?
Awaiting for your reply!!
Nice Video!
Will it run in esp32?
Will there be a attiny84 digispark version?
There already is, check the github page, that's the picture shown.
Actually that's not a Digispark. That's a micro version of Pro Micro. Digispark version is in the wish list and if you read the description it looks hard and need lots of work: github.com/spacehuhn/wifi_ducky/issues/3
Sum, it looks possible but not ready yet.
Thank
How we add External antenna to this?
Where is the 5v Pin at the NodeMCU 8266 ?
its the vin pin,and i know its 1year later
@@jorgetucson8196 So should I connect vin?
So in order for this to work. once i build everything, i have to plug it into the victims computer and then i can access it wirelessly?
pretty much
also you said i could use a nodeMCU for the simple version of this project. But the nodeMCU doesnt have a 5v pin, only 3.3v. could this be used?
youre 4 days late bud
Hey so I built the more complex version and all was good until I had to flash it, I copied your settings and downloaded and selected the 4mb bin file and tried to flash it, nothing. All that happens is the little blue thing in the bottom left corner keeps going around. I then tried the 1mb bin file and still nothing, I continued by checking the port and determined this wasnt the issue, does anyone have any idea on how to fix this?
FlatEarth i have the same problem :( ,anyone?
same problem
it happend to me to
@Lentex found a fix. Is GPIO 0 connected to ground as it has to be for the chip to receive code. Then disconnect it after you’ve uploaded the code
@@lntx3913 yeah thats the one
is universal layout?
Leonardo Pro Micro can do this ??
Hey man when I send a live script/command it sends but nothing happens on the computer any ideas? Used both 1mb and 4mb same result
Make sure the arduino is flashed correctly, what you're describing sounds like the esp is sending commands to the arduino but its not executing. Also make sure you wired it correctly.
I used my NodeMCU and I'm notsure what i could do differently when flashing the bin file
Im talking about the arduino, you do realize that you need the arduino to be connected correctly and also be running the right software for this to work.
the ESPFlaher not work at me is not come a new port
Hi.
Are you still sell this? Links are not orking.
Does it work with rasbbery pi pico
i have done the simple version and all work, i can with my phone see the page and i can type text for upload but when i upload something like "GUI" the LED on my pro micro flash but nothing appened on my computer , does anyone have any idea on how to fix this?
i use the 1mb file and this work! YOUPI
Does it work with the nodeMCU without needing anything else
Paul Garcia no
? why?
Zachar Doney you need more than a nodeMCU.
When are the malduinos getting shipped from the indigogo.
There will be an update coming later today.
They'll start shipping this week :)
Max Swift thank God I really want mine when they do ship how can we track the order
Where can you get the wires for the simple version?
could anyone say how to add sd card module into this thing...?
Could you use an arduino uno instead of the one in this vid?
moo cow sure
Short answer: No. Long answer: Maybe, but it's hard and complicated.
moo cow No you cannot. The pro micro has a different chip than the uno. The uno doesn't support the keyboard.h library.
The 3.3V regulator is nesesery if i have ATMEGA32U4 3V not 5V?
Marcin Vego correct but always better to be on the safe side just incase ur not sure
No regulator needed if you have a 3.3v version :)
Thanks from Poland :)
How to plug esp8266 to your computer?