Hello golf wagon! Thanks a ton for posting this video! My sister called me up and said that some new installer had altered her alarm system, and every time she switched it on or off, the ridiculously loud alarm squawked and woke up everyone in the house. Thanks to your video, I was able to step her through the procedure to switch off the keypad squawk! Thank you a ton!!!!
Hi, what it’s the second exit delay for, and in communication when put mobile number now it works (there it’s no sim slot as far as I know, so how it this works) ?
I have had a tenant in the house and have now moved in myself. I need to reset the master code and do not know how to, the tenant is not contactable and I do not know the code they had put in. Can you help ? the Alarm model is K32lcd hope to get some feedback
HI @golf Wagen hi all alarm freeks. I programed my padox via the same K32lcd and im comming to an issue with my time section. The time on the display is making delays, and as the time passes its becoming bigger and bigger. I even made a sync via BabyWare and its the same. Please help me what could be the issue and how to resolve it. Thanks
it is a known bug alarm paradox. the only option is to find a time correction address in the programming. now I'm not sure if every alarm paradox has such a possibility.
@@golfwagen4173 Hi friend. Firstly thanks for the fast and constructive answer. Will the panel board firmware upgrade help?? I have SP4000 on 5.2.5? If so..can you somehow provide me with the file? Thanks and greetings
Hi! Our system says two areas are low in battery. An outdoors wireless sensor and indoor sensor on a sliding door. We've changed the batteries but it still says low battery. Any recommendations??
Hi, could you possibly help.. When i use those button sequences it says code denied. I just need to set the auto arm feature now.. I can do the other menu refered to as section 741 but it gives a code and a few stars in that option.. Any help will be appreciated.
Hi! Nice work.I have a TBL : Bell Missing and I can't get rid of that, even if everything is tied (wire wise) and working good.Not even BabyWare software don't allow me to delete that trouble display.Can you help?
HI there. Would you be able to help with auto arming.. I go to section 741 but it just has a few numbers and *.. example **2345*** Much appreciated. I also tried pushing the power sign button and it asks for code but master code as well as user code says denied...Any ideas
+Shaun van Tonder must know the installation code to change settings in section 741, but by default it is enabled for autoarm Part 1. to the installer menu, press the enter button and enter the installer code 0000 default
TM50 compatibil DGP EVO vers 2,16+, MG,SP vers 4,72+ (TM40 out of shop). when you replace everything will work, but it will light a bus fault module error (old keyboard). so enter inst.code and enter 955 bus scanning address. then the fault will be removed
golf Wagen thank you very much. Is just replace the conections with the new ones? I think the Tm only comes with a simple plug, right? Thank you very much.
![เปิดบ้าน โคตรสวย ป๋องกพล รู้จักตั้งนาน เพิ่งรู้ว่ารวย!!! l [Nickynachat]](http://i.ytimg.com/vi/tmgCF_2HfYI/mqdefault.jpg)
Hello golf wagon!
Thanks a ton for posting this video!
My sister called me up and said that some new installer had altered her alarm system, and every time she switched it on or off, the ridiculously loud alarm squawked and woke up everyone in the house.
Thanks to your video, I was able to step her through the procedure to switch off the keypad squawk!
Thank you a ton!!!!
Hi, what it’s the second exit delay for, and in communication when put mobile number now it works (there it’s no sim slot as far as I know, so how it this works) ?
I have had a tenant in the house and have now moved in myself. I need to reset the master code and do not know how to, the tenant is not contactable and I do not know the code they had put in.
Can you help ? the Alarm model is K32lcd hope to get some feedback
I have the same problem
Anyway to switch the language? Also any way to get rid of the fire alert?
How to change the keyboard k641 by other same model?
HI @golf Wagen hi all alarm freeks. I programed my padox via the same K32lcd and im comming to an issue with my time section. The time on the display is making delays, and as the time passes its becoming bigger and bigger. I even made a sync via BabyWare and its the same. Please help me what could be the issue and how to resolve it. Thanks
it is a known bug alarm paradox. the only option is to find a time correction address in the programming. now I'm not sure if every alarm paradox has such a possibility.
@@golfwagen4173 Hi friend. Firstly thanks for the fast and constructive answer. Will the panel board firmware upgrade help?? I have SP4000 on 5.2.5? If so..can you somehow provide me with the file? Thanks and greetings
What do I do if mine says system error and keeps beeping as though it's operating on the reserve battery but the electrify is on?
Very useful. Thanks. When you need the tech. who installed and he never answers...well You tube is the next.
Do you know how to switch off the alarm ringung every time i actívate or deactivate the alarm??
Hi, after a power outtage it looks like mine is dead and says CALL SERVICE. Is there anything I can do?>
Its wire problem. Wire out from terminal or cut wire for example
Hi! Our system says two areas are low in battery. An outdoors wireless sensor and indoor sensor on a sliding door. We've changed the batteries but it still says low battery. Any recommendations??
check later
Χωρίς τηλεφωνητή συο συστήμα θα παρει τηλεφωνο αλλά μόνο υον αριθμό θα δείξει στο τηλέφωνο μια απλή κλήση..
He denied to be on
how do I stop my phone ringing out everytime we set the alarm. It costs me a fortune in telephone charges
what's your PBX (SP5500, mg5050, dgp192), call or sends an SMS about the arm / disarm
Am trying to do walktest how can I get to where to set it in the keypad
Hi, could you possibly help.. When i use those button sequences it says code denied. I just need to set the auto arm feature now.. I can do the other menu refered to as section 741 but it gives a code and a few stars in that option.. Any help will be appreciated.
How to remove a paradox keypad from the wall mount to change the battery
Hi! Nice work.I have a TBL : Bell Missing and I can't get rid of that, even if everything is tied (wire wise) and working good.Not even BabyWare software don't allow me to delete that trouble display.Can you help?
Έχεις πρόγραμμα μέσα υπολογιστή να κάνεις φόρτιση του πρόγραμμα του
HI there.
Would you be able to help with auto arming.. I go to section 741 but it just has a few numbers and *.. example **2345*** Much appreciated. I also tried pushing the power sign button and it asks for code but master code as well as user code says denied...Any ideas
+Shaun van Tonder must know the installation code to change settings in section 741, but by default it is enabled for autoarm Part 1. to the installer menu, press the enter button and enter the installer code 0000 default
Hi, i would upgrade my kl32lcd with the TM 40. I would to know if This is to dificult. Can you tell me please? Thank you very much
TM50 compatibil DGP EVO vers 2,16+, MG,SP vers 4,72+ (TM40 out of shop).
when you replace everything will work, but it will light a bus fault module error (old keyboard). so enter inst.code and enter 955 bus scanning address. then the fault will be removed
golf Wagen thank you very much. Is just replace the conections with the new ones? I think the Tm only comes with a simple plug, right? Thank you very much.
Solder and tin should be used. colors are equal
golf Wagen thank you very much! Apreciate your help
Hi! I have question. How to switch on the EOL fucntion ?
press ENTER, insert install code "0000 is default, adress /706/ number 2 ON (EOL no ATZ)
Thanks so much 🙏
Hy.
I tried to change the codes.
I mistakenly deleted all the codes. Even the master code. Now i have non. What to do?
How do I reset a remote current remote
Why do we need these things door lock enough otherwise if someone broke in they'd know exactly how to disable all security systems
03:40
Hi i have a question
The right light doesn't switch on
⁸¹³⁶
Uh
.
Terrible expkanation